Cytoprotection of Human Progenitor and Stem Cells through Encapsulation in Alginate Templated, Dual Crosslinked Silk and Silk-Gelatin Composite Hydrogel Microbeads

Platelet Concentrates Preconditioning of Mesenchymal Stem Cells and Combined Therapies: Integrating Regenerative Strategies for Enhanced Clinical Applications

This article presents a comprehensive review of the factors influencing the efficacy of mesenchymal stem cells (MSCs) transplantation and its association with platelet concentrates (PCs). It focuses on investigating the impact of PCs' composition, the age and health status of platelet donors, application methods, and environmental factors on the outcomes of relevant treatments. In addition, it delves into the strategies and mechanisms for optimizing MSCs transplantation with PCs, encompassing preconditioning and combined therapies. Furthermore, it provides an in-depth exploration of the signaling pathways and proteomic characteristics associated with preconditioning and emphasizes the efficacy and specific effects of combined therapy. The article also introduces the latest advancements in the application of biomaterials for optimizing regenerative medical strategies, stimulating scholarly discourse on this subject. Through this comprehensive review, the primary goal is to facilitate a more profound comprehension of the factors influencing treatment outcomes, as well as the strategies and mechanisms for optimizing MSCs transplantation and the application of biomaterials in regenerative medicine, offering theoretical guidance and practical references for related research and clinical practice.

Magnetically-actuated microcages for cells entrapment, fabricated by laser direct writing via two photon polymerization

The manipulation of biological materials at cellular level constitutes a sine qua non and provocative research area regarding the development of micro/nano-medicine. In this study, we report on 3D superparamagnetic microcage-like structures that, in conjunction with an externally applied static magnetic field, were highly efficient in entrapping cells. The microcage-like structures were fabricated using Laser Direct Writing via Two-Photon Polymerization (LDW via TPP) of IP-L780 biocompatible photopolymer/iron oxide superparamagnetic nanoparticles (MNPs) composite. The unique properties of LDW via TPP technique enabled the reproduction of the complex architecture of the 3D structures, with a very high accuracy i.e., about 90 nm lateral resolution. 3D hyperspectral microscopy was employed to investigate the structural and compositional characteristics of the microcage-like structures. Scanning Electron Microscopy coupled with Energy Dispersive X-Ray Spectroscopy was used to prove the unique features regarding the morphology and the functionality of the 3D structures seeded with MG-63 osteoblast-like cells. Comparative studies were made on microcage-like structures made of IP-L780 photopolymer alone (i.e., without superparamagnetic properties). We found that the cell-seeded structures made by IP-L780/MNPs composite actuated by static magnetic fields of 1.3 T were 13.66 ± 5.11 folds (p < 0.01) more efficient in terms of cells entrapment than the structures made by IP-L780 photopolymer alone (i.e., that could not be actuated magnetically). The unique 3D architecture of the microcage-like superparamagnetic structures and their actuation by external static magnetic fields acted in synergy for entrapping osteoblast-like cells, showing a significant potential for bone tissue engineering applications.

Tailoring biomaterials for biomimetic organs-on-chips

Organs-on-chips are microengineered microfluidic living cell culture devices with continuously perfused chambers penetrating to cells. By mimicking the biological features of the multicellular constructions, interactions among organs, vascular perfusion, physicochemical microenvironments, and so on, these devices are imparted with some key pathophysiological function levels of living organs that are difficult to be achieved in conventional 2D or 3D culture systems. In this technology, biomaterials are extremely important because they affect the microstructures and functionalities of the organ cells and the development of the organs-on-chip functions. Thus, herein, we provide an overview on the advances of biomaterials for the construction of organs-on-chips. After introducing the general components, structures, and fabrication techniques of the biomaterials, we focus on the studies of the functions and applications of these biomaterials in the organs-on-chips systems. Applications of the biomaterial-based organs-on-chips as alternative animal models for pharmaceutical, chemical, and environmental tests are described and highlighted. The prospects for exciting future directions and the challenges of biomaterials for realizing the further functionalization of organs-on-chips are also presented.

A comprehensive review of silk-fibroin hydrogels for cell and drug delivery applications in tissue engineering and regenerative medicine

Hydrogel scaffolds hold great promise for developing novel treatment strategies in the field of regenerative medicine. Within this context, silk fibroin (SF) has proven to be a versatile material for a wide range of tissue engineering applications owing to its structural and functional properties. In the present review, we report on the design and fabrication of different forms of SF-based scaffolds for tissue regeneration applications, particularly for skin, bone, and neural tissues. In particular, SF hydrogels have emerged as delivery systems for a wide range of bio-actives. Given the growing interest in the field, this review has a primary focus on the fabrication, characterization, and properties of SF hydrogels. We also discuss their potential for the delivery of drugs, stem cells, genes, peptides, and growth factors, including future directions in the field of SF hydrogel scaffolds.

Dual-crosslinked in-situ forming alginate/silk fibroin hydrogel with potential for bone tissue engineering

This study aimed to improve the mechanical and biological properties of alginate-based hydrogels. For this purpose, in-situ forming hydrogels were prepared by dual crosslinking of Alginate (Alg)/Oxidized Alginate (OAlg)/Silk Fibroin (SF) through simultaneous ionic gelation using CaCO3-GDL and Schiff-base reaction. The resulting hydrogels were characterized by FTIR, SEM, compressive modulus, and rheological tests. Compared to the physically-crosslinked alginate hydrogel, the compressive modulus of dual-crosslinked Alg/OAlg/SF hydrogel increased from 28 to 67 kPa, due to the covalent imine bond formation. Then, MTT and DAPI staining assays were performed to demonstrate the biocompatibility of hydrogel. Furthermore, the differentiation potential of bone marrow mesenchymal stem cells encapsulated in hydrogel scaffolds to bone tissue was tested by ALP activity, Alizarin Red staining, and real-time PCR. The overall results showed the potential of Alginate/Oxidized Alginate/Silk Fibroin hydrogel scaffold for bone tissue engineering applications.

[One-step generation of droplet-filled hydrogel microfibers for 3D cell culture using an all-aqueous microfluidic system]

Hydrogel microfibers, which are characterized by flexible mechanical properties, a uniform spatial distribution, large surface areas, and excellent biocompatibility, hold great potential for various biomedical applications. However, the fabrication of heterogeneous hydrogel microfibers with high cell-loading capacity and the ability to carry multiple components via an environmentally friendly method remains challenging. In this study, we developed a novel pneumatic pump-assisted all-aqueous microfluidic system that enables the one-step fabrication of all-aqueous droplet-filled hydrogel microfibers with unique morphologies and adjustable configurations. By designing a pump-valve cycling system and selecting two immiscible fluids with stable water interfaces (dextran and polyethylene glycol), we successfully fabricated alginate microfibers with equidistantly arranged droplets through the ionotropic gelation reaction between sodium alginate and calcium chloride. The droplet size, interdroplet spacing, and microfiber dimensions could be flexibly controlled by adjusting the flow rates of the inner-phase, middle-phase, and outer-phase inlets. The results showed that the system enabled the high-throughput in situ formation of functional three-dimensional cell spheroids. The generated cell spheroids exhibited excellent cell viability and drug-testing functionality, indicating their potential applications in cell cultures. The developed technique offers strong support for future biomedical research and applications, and provides a new approach for the preparation of multifunctional hydrogel microfibers for materials science, tissue engineering, and drug testing.

Multifunctional silk vinyl sulfone-based hydrogel scaffolds for dynamic material-cell interactions

Biochemical and mechanical interactions between cells and the surrounding extracellular matrix influence cell behavior and fate. Mimicking these features in vitro has prompted the design and development of biomaterials, with continuing efforts to improve tailorable systems that also incorporate dynamic chemical functionalities. The majority of these chemistries have been incorporated into synthetic biomaterials, here we focus on modifications of silk protein with dynamic features achieved via enzymatic, "click", and photo-chemistries. The one-pot synthesis of vinyl sulfone modified silk (SilkVS) can be tuned to manipulate the degree of functionalization. The resultant modified protein-based material undergoes three different gelation mechanisms, enzymatic, "click", and light-induced, to generate hydrogels for in vitro cell culture. Further, the versatility of this chemical functionality is exploited to mimic cell-ECM interactions via the incorporation of bioactive peptides and proteins or by altering the mechanical properties of the material to guide cell behavior. SilkVS is well-suited for use in in vitro culture, providing a natural protein with both tunable biochemistry and mechanics.

Synthesis and characterization of silk-poly(guluronate) hybrid polymers for the fabrication of dual crosslinked, mechanically dynamic hydrogels

The rapid ionic crosslinking of alginate has been actively studied for biomedical applications including hydrogel scaffolds for tissue engineering, injectable gels, and 3D bioprinting. However, the poor structural stability of ionic crosslinks under physiological conditions limits the widespread applications of these hydrogels. Moreover, the lack of cell adhesion to the material combined with the inability of proteases to degrade alginate further restrict utility as hydrogel scaffolds. Blends of alginate with silk fibroin have been proposed for improved structural and mechanical properties, but potential phase separation between the hydrophobic protein and the hydrophilic polysaccharide remains an issue. In this study, we demonstrated the synthesis of a hybrid biopolymer composed of a silk backbone with side chains of poly(guluronate) isolated from alginate to introduce rapid ionic crosslinking on enzymatically crosslinked silk-based hydrogels for on-demand and reversible stiffening and softening properties. Dual crosslinked macro- and microgels of silk fibroin-poly(guluronate) (SF-PG) hybrid polymers displayed dynamic morphology with reversible shrinking and swelling behavior. SF-PG hydrogel discs demonstrated dynamic mechanics with compressive moduli ranging from less than 5 kPa to over 80 kPa and underwent proteolytic degradation unlike covalently crosslinked alginate controls. SF-PG gels supplemented with gelatin substituted with tyramine or both tyramine and PG also supported the attachment and survival of murine fibroblasts, suggesting potential uses of these new hydrogels in mammalian cell culture to investigate cellular responses to dynamic mechanics or modeling of diseases defined by matrix mechanics, such as fibrosis and cancer.

Photo-crosslinkable hyaluronic acid microgels with reactive oxygen species scavenging capacity for mesenchymal stem cell encapsulation

Mesenchymal stem cells (MSCs) have gained increasing attention in various biomedical applications. However, conventional therapeutic approaches, such as direct intravenous injection, are associated with low cell survival due to the shear force during injection and the oxidative stress microenvironments in the lesion area. Herein, a photo-crosslinkable antioxidant hydrogel based on tyramine- and dopamine-modified hyaluronic acid (HA-Tyr/HA-DA) was developed. Meanwhile, human umbilical cord-derived mesenchymal stem cells (hUC-MSCs) were encapsulated in HA-Tyr/HA-DA hydrogel using a microfluidic system to create size-controllable microgels (hUC-MSCs@microgels). The HA-Tyr/HA-DA hydrogel was demonstrated to have good rheology, biocompatibility, and antioxidant properties for cell microencapsulation. The hUC-MSCs encapsulated in microgels showed a high viability and a significantly improved the survival rate under oxidative stress conditions. Therefore, the presented work provides a promising platform for MSCs microencapsulation, which may further improve the stem cell-based biomedical applications.

Silk chemistry and biomedical material designs

Silk fibroin has applications in different medical fields such as tissue engineering, regenerative medicine, drug delivery and medical devices. Advances in silk chemistry and biomaterial designs have yielded exciting tools for generating new silk-based materials and technologies. Selective chemistries can enhance or tune the features of silk, such as mechanics, biodegradability, processability and biological interactions, to address challenges in medically relevant materials (hydrogels, films, sponges and fibres). This Review details the design and utility of silk biomaterials for different applications, with particular focus on chemistry. This Review consists of three segments: silk protein fundamentals, silk chemistries and functionalization mechanisms. This is followed by a description of different crosslinking chemistries facilitating network formation, including the formation of composite biomaterials. Utility in the fields of tissue engineering, drug delivery, 3D printing, cell coatings, microfluidics and biosensors are highlighted. Looking to the future, we discuss silk biomaterial design strategies to continue to improve medical outcomes.

Environmentally adaptive polysaccharide-based hydrogels and their applications in extreme conditions: A review

Polysaccharide hydrogels are one of the most promising hydrogel materials due to their inherent characteristics, including biocompatibility, biodegradability, renewability, and easy modification, and their structure and functional designs have been widely researched to adapt to different application scenarios as well as to broaden their application fields. As typical wet-soft materials, the high water content and water-absorbing ability of polysaccharide-based hydrogels (PHs) are conducive to their wide biomedical applications, such as wound healing, tissue repair, and drug delivery. In addition, along with technological progress, PHs have shown potential application prospects in some high-tech fields, including human-computer interaction, intelligent driving, smart dressing, flexible sensors, etc. However, in practical applications, due to the poor ability of PHs to resist freezing below zero, dehydration at high temperature, and acid-base/swelling-induced deformation in a solution environment, they are prone to lose their wet-soft peculiarities, including structural integrity, injectability, flexibility, transparency, conductivity and other inherent characteristics, which greatly limit their high-tech applications. Hence, reducing their freezing point, enhancing their high-temperature dehydration resistance, and improving their extreme solution tolerance are powerful approaches to endow PHs with multienvironmental adaptability, broadening their application areas. This report systematically reviews the study advances of environmentally adaptive polysaccharide-based hydrogels (EAPHs), comprising anti-icing hydrogels, high temperature/dehydration resistant hydrogels, and acid/base/swelling deformation resistant hydrogels in recent years. First, the construction methods of EAPHs are presented, and the mechanisms and properties of freeze-resistant, high temperature/dehydration-resistant, and acid/base/swelling deformation-resistant adaptations are simply demonstrated. Meanwhile, the features of different strategies to prepare EAPHs as well as the strategies of simultaneously attaining multienvironmental adaptability are reviewed. Then, the applications of extreme EAPHs are summarized, and some meaningful works are well introduced. Finally, the issues and future outlooks of PH environment adaptation research are elucidated.

3D printing of complicated GelMA-coated Alginate/Tri-calcium silicate scaffold for accelerated bone regeneration

Polymer-based composite scaffolds are an attractive class of biomaterials due to their suitable physical and mechanical performance as well as appropriate biological properties. When such composites contain osteoinductive ceramic nanopowders, it is possible, in principle, to stimulate the seeded cells to differentiate into osteoblasts. However, reproducibly fabricating and developing an appropriate niche for cells' activities in three-dimensional (3D) scaffolds remains a challenge using conventional fabrication techniques. Additive manufacturing provides a new strategy for the fabrication of complex 3D structures. Here, an extrusion-based 3D printing method was used to fabricate the Alginate (Alg)/Tri-calcium silicate (C₃S) bone scaffolds. To improve physical and biological attributes, scaffolds were coated with gelatin methacryloyl (GelMA), a biocompatible viscose hydrogel. Conducting a combination of experimental techniques and molecular dynamics simulations, it is found that the composition ratio of Alg/C₃S governs intermolecular interactions among the polymer and ceramic, affecting the product performance. Investigating the effects of various C₃S amounts in the bioinks, the 90/10 composition ratio of Alg/C₃S is known as the optimum content in developed bioinks. Accordingly, the printability of high-viscosity inks is boosted by improved hierarchical interactions among assemblies, which in turn leads to better nanoscale alignment in extruded macroscopic filaments. Conducting multiple tests on specimens, the GelMA-coated Alg/C₃S scaffolds (with a composition ratio of 90/10) were shown to have improved mechanical qualities and cell adhesion, spreading, proliferation, and osteogenic differentiation, compared to the bare scaffolds, making them better candidates for further future research. Overall, the in-silico and in vitro studies of GelMA-coated 3D-printed Alg/C₃S scaffolds open new aspects for biomaterials aimed at the regeneration of large- and complicated-bone defects through modifying the extrusion-based 3D-printed constructs.

Horseradish Peroxidase Catalyzed Silk-Prefoldin Composite Hydrogel Networks

Protein-based hydrogel biomaterials provide a platform for different biological applications, including the encapsulation and stabilization of different biomolecules. These hydrogel properties can be modulated by controlling the design parameters to match specific needs; thus, multicomponent hydrogels have distinct advantages over single-component hydrogels due to their enhanced versatility. Here, silk fibroin and γ-prefoldin chaperone protein based composite hydrogels were prepared and studied. Different ratios of the proteins were chosen, and the hydrogels were prepared by enzyme-assisted cross-linking. The secondary structure of the two proteins, dityrosine bond formation, and mechanical properties were assessed. The results obtained can be used as a platform for the rational design of composite thermostable hydrogel biomaterials to facilitate protection (due to hydrogel mechanics) and retention of bioactivity (e.g., of enzymes and other biomolecules) due to chaperone-like properties of γ-prefoldin.