Fine wettability control created by a photochemical combination method for inkjet printing on self-assembled monolayers

Interfacial fluid manipulation with bioinspired strategies: special wettability and asymmetric structures

The inspirations from nature always enlighten us to develop advanced science and technology. To survive in complicated and harsh environments, plants and animals have evolved remarkable capabilities to control fluid transfer via sophisticated designs such as wettability contrast, oriented micro-/nano-structures, and geometry gradients. Based on the bioinspired structures, the on-surface fluid manipulation exhibits spontaneous, continuous, smart, and integrated performances, which can promote the applications in the fields of heat transfer, microfluidics, heterogeneous catalysis, water harvesting, etc. Although fluid manipulating interfaces (FMIs) have provided plenty of ideas to optimize the current systems, a comprehensive review of history, classification, fabrication, and integration focusing on their interfacial chemistry and asymmetric structure is highly required. In this review, we systematically introduce development and highlight the state-of-the-art progress of bioinspired FMIs. Firstly, the biological prototype and development timeline are presented, and the underlying mechanism of on-surface fluid control on versatile structures is analyzed. Secondly, the definition and classification of FMIs as well as the strategy for controlling fluid/interface interaction are discussed. Thirdly, emergent applications of FMIs in practical scenarios including fog/vapor collection, fluid diodes, interfacial catalysis, etc. are presented. Furthermore, the challenges and prospects of interfacial liquid manipulation are concluded. We envision that this review should provide guidance for the incorporation of FMIs into suitable situations, which enlightens interdisciplinary research and practical applications in the fields of interface chemistry, materials design, bionic science, fluid dynamics, etc.

Challenges, Prospects, and Emerging Applications of Inkjet-Printed Electronics: A Chemist's Point of View

Driven by the development of new functional inks, inkjet-printed electronics has achieved several milestones upon moving from the integration of simple electronic elements (e.g., temperature and pressure sensors, RFID antennas, etc.) to high-tech applications (e.g. in optoelectronics, energy storage and harvesting, medical diagnosis). Currently, inkjet printing techniques are limited by spatial resolution higher than several micrometers, which sets a redhibitorythreshold for miniaturization and for many applications that require the controlled organization of constituents at the nanometer scale. In this Review, we present the physico-chemical concepts and the equipment constraints underpinning the resolution limit of inkjet printing and describe the contributions from molecular, supramolecular, and nanomaterials-based approaches for their circumvention. Based on these considerations, we propose future trajectories for improving inkjet-printing resolution that will be driven and supported by breakthroughs coming from chemistry. Please check all text carefully as extensive language polishing was necessary. Title ok? Yes.

Morphology-controllable synthesis and application of TiO2 nanotube arrays with “photocatalysis and self-cleaning” synergism

The integration of photocatalytic materials and self-cleaning superhydrophobic materials provides a possibility of combining decontamination and antifouling.

Soft Ultraviolet (UV) Photopatterning and Metallization of Self-Assembled Monolayers (SAMs) Formed from the Lipoic Acid Ester of α-Hydroxy-1-acetylpyrene: The Generality of Acid-Catalyzed Removal of Thiol-on-Gold SAMs using Soft UV Light

Under a layer of 0.1 M HCl in isopropanol, soft ultraviolet (UV) (365 nm) photolysis of the thiol-on-gold self-assembled monolayer (SAM) derived from the lipoic acid ester of α-hydroxy-1-acetylpyrene results in the expected removal of the acetylpyrene protecting group. When photolyzing through a mask, this can be used to produce a patterned surface and, at a controlled electrochemical potential, it is then possible to selectively and reversibly electrodeposit copper on the photolyzed regions. Rather surprisingly, under these photolysis conditions, there is not only the expected photodeprotection of the ester but also partial removal of the lipoic acid layer which has been formed. In further studies, it is shown that this type of acid-catalyzed photoremoval of SAM layers by soft UV is a rather general phenomenon and results in the partial removal of the thiol-on-gold SAM layers derived from other ω-thiolated carboxylic acids. However, this phenomenon is chain-length dependent. Under conditions in which there is a ∼60% reduction in the thickness of the SAM derived from dithiobutyric acid, the SAM derived from mercaptoundecanoic acid is almost unaffected. The process by which the shorter-chain SAM layers are partially removed is not fully understood because these compounds do not absorb significantly in the 365 nm region of the spectrum! Significantly, this study shows that acid catalysis photolysis of thiol-on-gold SAMs needs to be used with caution.

Wetting of Inkjet Polymer Droplets on Porous Alumina Substrates

The resolution of inkjet printing technology is determined by wetting and evaporation processes after the jet drop contacts the substrate. Here, the wetting of different picoliter solubilized polymer droplets jetting onto one-end-closed porous alumina was investigated. The selected polymers are commonly used in inkjet ink. The synergistic effects of the hierarchical structure and substrate surface modification were used to control the behavior of polymer-based ink drops. A model that invokes the effect of surface tension was applied to calculate the amount of polymer solution penetrating into the pores. The calculation corroborates experimental observations and shows that the volume of polymer solution in the pores increases with an increase in pore radius and depth, resulting in less solution remaining on the substrate surface. The structure of the porous substrate coupled with intrinsic polymer properties and surface modifications all contribute to the resolution that can be achieved via inkjet printing.

Multifunctional superamphiphobic TiO2 nanostructure surfaces with facile wettability and adhesion engineering

Compared to conventional top-down photo-cleavage method, a facile bottom-up ink-combination method to in situ and rapidly achieve water wettability and adhesion transition, with a great contrast on the superamphiphobic TiO2 nanostructured film, is described. Moreover, such combination method is suitable for various kinds of superamphiphobic substrate. Oil-based ink covering or removing changes not only the topographical morphology but also surface chemical composition, and these resultant topographical morphology and composition engineering realize the site-selectively switchable wettability varying from superamphiphobicity to amphiphilicity, and water adhesion between sliding superamphiphobicity and sticky superamphiphobicity in micro-scale. Additionally, positive and negative micro-pattern can be achieved by taking advantage of the inherent photocatalytic property of TiO2 with the assistance of anti-UV light ink mask. Finally, the potential applications of the site-selectively sticky superamphiphobic surface were demonstrated. In a proof-of-concept study, the microdroplet manipulation (storage, moving, mixing, and transfer), specific gas sensing, wettability template for positive and negative ZnO patterning, and site-selective cell immobilization have been demonstrated. This study will give an important input to the field of advanced functional material surfaces with special wettability.