Flexible and stretchable micromagnet arrays for tunable biointerfacing

Magnetically Induced Anisotropic Interaction in Colloidal Assembly

The wide accessibility to nanostructures with high uniformity and controllable sizes and morphologies provides great opportunities for creating complex superstructures with unique functionalities. Employing anisotropic nanostructures as the building blocks significantly enriches the superstructural phases, while their orientational control for obtaining long-range orders has remained a significant challenge. One solution is to introduce magnetic components into the anisotropic nanostructures to enable precise control of their orientations and positions in the superstructures by manipulating magnetic interactions. Recognizing the importance of magnetic anisotropy in colloidal assembly, we provide here an overview of magnetic field-guided self-assembly of magnetic nanoparticles with typical anisotropic shapes, including rods, cubes, plates, and peanuts. The Review starts with discussing the magnetic energy of nanoparticles, appreciating the vital roles of magneto-crystalline and shape anisotropies in determining the easy magnetization direction of the anisotropic nanostructures. It then introduces superstructures assembled from various magnetic building blocks and summarizes their unique properties and intriguing applications. It concludes with a discussion of remaining challenges and an outlook of future research opportunities that the magnetic assembly strategy may offer for colloidal assembly.

The alloying-induced electrical conductivity of metal-chalcogenolate nanowires

Alloying is one of the most effective strategies to change the properties of inorganic-organic hybrid materials, but there are few reports of the alloying of one-dimensional nanowires with precise atomic structure due to the difficulties in obtaining the single crystals of nanowires themselves. Herein, we describe the synthesis and characterization of an alloyed one-dimensional Ag-Cu nanowire [Ag_2.5Cu_1.5(S-Adm)₄]_n. Compared with the unalloyed [Ag₄(S-Adm)₄]_n, our novel alloyed nanowire exhibits good conductivity, and its resistivity (as a powder) was determined to be 107 Ω m by impedance analysis-consistent with that of a semiconductor. Accordingly, based on these properties combined with its excellent thermal stability and high-yielding, gram-scale synthesis, [Ag_2.5Cu_1.5(S-Adm)₄]_n is proposed for electronic-device applications.

Multi-Functional Hydrogel-Interlayer RF/NFC Resonators as a Versatile Platform for Passive and Wireless Biosensing

Wearable sensors promise to transform human understanding of body state. However, despite many wearable sensor modalities that exist, few demonstrate the raw capabilities required for many emerging healthcare applications-passivity (and microelectronics-free), wireless readout, long-term operation, and specificity. Hydrogel-interlayer radio-frequency resonators are demonstrated as a versatile platform for passive and wireless biosensing. Fabricated using a simple vinyl cutter, the base resonator is composed of unanchored, broad-side coupled coils interceded by multifunctional hydrogels-such resonators are tuned to be sensitive to specific analytical or physical signals by modifying hydrogel composition. These resonators are transformed into near-field communication (NFC) sensor circuits through the simple attachment of an LED. These enable direct quantification of sensor state by cellphone and eye with no specialized electronics required. Resonator arrays are finally fused with silicone to form soft, wireless sensor skins that enable co-readout of analytical to physical signals while molded to human subjects. Such low-cost, accessible platforms can integrate with environments in transformative ways, enabling new applications in wireless sensing.

Nanowire Genome: A Magic Toolbox for 1D Nanostructures

1D nanomaterials with high aspect ratio, i.e., nanowires and nanotubes, have inspired considerable research interest thanks to the fact that exotic physical and chemical properties emerge as their diameters approach or fall into certain length scales, such as the wavelength of light, the mean free path of phonons, the exciton Bohr radius, the critical size of magnetic domains, and the exciton diffusion length. On the basis of their components, aspect ratio, and properties, there may be imperceptible connections among hundreds of nanowires prepared by different strategies. Inspired by the heredity system in life, a new concept termed the "nanowire genome" is introduced here to clarify the relationships between hundreds of nanowires reported previously. As such, this approach will not only improve the tools incorporating the prior nanowires but also help to precisely synthesize new nanowires and even assist in the prediction on the properties of nanowires. Although the road from start-ups to maturity is long and fraught with challenges, the genetical syntheses of more than 200 kinds of nanostructures stemming from three mother nanowires (Te, Ag, and Cu) are summarized here to demonstrate the nanowire genome as a versatile toolbox. A summary and outlook on future challenges in this field are also presented.

Functional, RF-Trilayer Sensors for Tooth-Mounted, Wireless Monitoring of the Oral Cavity and Food Consumption

Wearable devices have emerged as powerful tools for personalized healthcare in spite of some challenges that limit their widespread applicability as continuous monitors of physiological information. Here, a materials-based strategy to add utility to traditional dielectric sensors by developing a conformal radiofrequency (RF) construct composed of an active layer encapsulated between two reverse-facing split ring resonators is applied. These small (down to 2 mm × 2 mm) passive dielectric sensors possess enhanced sensitivity and can be further augmented by functionalization of this interlayer material. Demonstrator devices are shown where the interlayer is: (i) a porous silk film, and (ii) a modified PNIPAM hydrogel that swells with pH or temperature. In vivo use is demonstrated by adhesion of the device on tooth enamel to detect foods during human ingestion. Such sensors can be easily multiplexed and yield data-rich temporal information during the diffusion of analytes within the trilayer structure. This format could be extended to a suite of interlayer materials for sensing devices of added use and specificity.

Single-cell mechanogenetics using monovalent magnetoplasmonic nanoparticles

Spatiotemporal interrogation of signal transduction at the single-cell level is necessary to answer a host of important biological questions. This protocol describes a nanotechnology-based single-cell and single-molecule perturbation tool, termed mechanogenetics, that enables precise spatial and mechanical control over genetically encoded cell-surface receptors in live cells. The key components of this tool are a magnetoplasmonic nanoparticle (MPN) actuator that delivers defined spatial and mechanical cues to receptors through target-specific one-to-one engagement and a micromagnetic tweezers (μMT) that remotely controls the magnitude of force exerted on a single MPN. In our approach, a SNAP-tagged cell-surface receptor of interest is conjugated with a single-stranded DNA oligonucleotide, which hybridizes to its complementary oligonucleotide on the MPN. This protocol consists of four major stages: (i) chemical synthesis of MPNs, (ii) conjugation with DNA and purification of monovalent MPNs, (iii) modular targeting of MPNs to cell-surface receptors, and (iv) control of spatial and mechanical properties of targeted mechanosensitive receptors in live cells by adjusting the μMT-to-MPN distance. Using benzylguanine (BG)-functionalized MPNs and model cell lines expressing either SNAP-tagged Notch or vascular endothelial cadherin (VE-cadherin), we provide stepwise instructions for mechanogenetic control of receptor clustering and for mechanical receptor activation. The ability of this method to differentially control spatial and mechanical inputs to targeted receptors makes it particularly useful for interrogating the differential contributions of each individual cue to cell signaling. The entire procedure takes up to 1 week.

Magnetic Nickel iron Electroformed Trap (MagNET): a master/replica fabrication strategy for ultra-high throughput (>100 mL h(-1)) immunomagnetic sorting

Microfluidic devices can sort immunomagnetically labeled cells with sensitivity and specificity much greater than that of conventional methods, primarily because the size of microfluidic channels and micro-scale magnets can be matched to that of individual cells. However, these small feature sizes come at the expense of limited throughput (ϕ < 5 mL h(-1)) and susceptibility to clogging, which have hindered current microfluidic technology from processing relevant volumes of clinical samples, e.g. V > 10 mL whole blood. Here, we report a new approach to micromagnetic sorting that can achieve highly specific cell separation in unprocessed complex samples at a throughput (ϕ > 100 mL h(-1)) 100× greater than that of conventional microfluidics. To achieve this goal, we have devised a new approach to micromagnetic sorting, the magnetic nickel iron electroformed trap (MagNET), which enables high flow rates by having millions of micromagnetic traps operate in parallel. Our design rotates the conventional microfluidic approach by 90° to form magnetic traps at the edges of pores instead of in channels, enabling millions of the magnetic traps to be incorporated into a centimeter sized device. Unlike previous work, where magnetic structures were defined using conventional microfabrication, we take inspiration from soft lithography and create a master from which many replica electroformed magnetic micropore devices can be economically manufactured. These free-standing 12 μm thick permalloy (Ni80Fe20) films contain micropores of arbitrary shape and position, allowing the device to be tailored for maximal capture efficiency and throughput. We demonstrate MagNET's capabilities by fabricating devices with both circular and rectangular pores and use these devices to rapidly (ϕ = 180 mL h(-1)) and specifically sort rare tumor cells from white blood cells.

Rapid Software-Based Design and Optical Transient Liquid Molding of Microparticles

Microparticles with complex 3D shape and composition are produced using a novel fabrication method, optical transient liquid molding, in which a 2D light pattern exposes a photopolymer precursor stream shaped along the flow axis by software-aided inertial flow engineering.

A polymerizable supramolecular approach for the fabrication of patterned magnetic nanoparticles

A straightforward method for the preparation of patterned magnetite nanoparticles (MNPs) was developed. The polymerizable supramolecular approach afforded finely patterned MNPs on a solid substrate after a sequential UV-irradiation-wet etching-calcination process with an MNP-embedded diacetylene film.