1
|
Biodegradable Honeycomb-Mimic Scaffolds Consisting of Nanofibrous Walls. Macromol Biosci 2024:e2300540. [PMID: 38456554 DOI: 10.1002/mabi.202300540] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/23/2023] [Revised: 02/17/2024] [Indexed: 03/09/2024]
Abstract
The scaffold is a porous three-dimensional (3D) material that supports cell growth and tissue regeneration. Such 3D structures should be generated with simple techniques and nontoxic ingredients to mimic bio-environment and facilitate tissue regeneration. In this work, simple but powerful techniques are demonstrated for the fabrication of lamellar and honeycomb-mimic scaffolds with poly(L-lactic acid). The honeycomb-mimic scaffolds with tunable pore size ranging from 70 to 160 µm are fabricated by crystal needle-guided thermally induced phase separation in a directional freezing apparatus. The compressive modulus of the honeycomb-mimic scaffold is ≈4 times higher than that of scaffold with randomly oriented pore structure. The fabricated honeycomb-mimic scaffold exhibits a hierarchical structure from nanofibers to micro-/macro-tubular structures. Pre-osteoblast MC3T3-E1 cells cultured on the honeycomb-mimic nanofibrous scaffolds exhibit an enhanced osteoblastic phenotype, with elevated expression levels of osteogenic marker genes, than those on either porous lamellar scaffolds or porous scaffolds with randomly oriented pores. The advanced techniques for the fabrication of the honeycomb-mimic structure may potentially be used for a wide variety of advanced functional materials.
Collapse
|
2
|
Biomass-Derived Catalytically Active Carbon Materials for the Air Electrode of Zn-air Batteries. CHEMSUSCHEM 2024:e202301779. [PMID: 38416074 DOI: 10.1002/cssc.202301779] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/29/2023] [Revised: 01/17/2024] [Accepted: 02/28/2024] [Indexed: 02/29/2024]
Abstract
Given the growing environmental and energy problems, developing clean, renewable electrochemical energy storage devices is of great interest. Zn-air batteries (ZABs) have broad prospects in energy storage because of their high specific capacity and environmental friendliness. The unavailability of cheap air electrode materials and effective and stable oxygen electrocatalysts to catalyze air electrodes are main barriers to large-scale implementation of ZABs. Due to the abundant biomass resources, self-doped heteroatoms, and unique pore structure, biomass-derived catalytically active carbon materials (CACs) have great potential to prepare carbon-based catalysts and porous electrodes with excellent performance for ZABs. This paper reviews the research progress of biomass-derived CACs applied to ZABs air electrodes. Specifically, the principle of ZABs and the source and preparation method of biomass-derived CACs are introduced. To prepare efficient biomass-based oxygen electrocatalysts, heteroatom doping and metal modification were introduced to improve the efficiency and stability of carbon materials. Finally, the effects of electron transfer number and H2 O2 yield in ORR on the performance of ZABs were evaluated. This review aims to deepen the understanding of the advantages and challenges of biomass-derived CACs in the air electrodes of ZABs, promote more comprehensive research on biomass resources, and accelerate the commercial application of ZABs.
Collapse
|
3
|
Formation of a fringe: A look inside baleen morphology using a multimodal visual approach. J Morphol 2023; 284:e21574. [PMID: 36807194 DOI: 10.1002/jmor.21574] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/06/2022] [Revised: 12/22/2022] [Accepted: 12/26/2022] [Indexed: 02/23/2023]
Abstract
Filter-feeding has been present for hundreds of millions of years, independently evolving in aquatic vertebrates' numerous times. Mysticete whales are a group of gigantic, marine filter-feeders that are defined by their fringed baleen and are divided into two groups: balaenids and rorquals. Recent studies have shown that balaenids likely feed using a self-cleaning, cross-flow filtration mechanism where food particles are collected and then swept to the esophagus for swallowing. However, it is unclear how filtering is achieved in the rorquals (Balaenopteridae). Lunging rorqual whales engulf enormous masses of both prey and water; the prey is then separated from the water through baleen plates lining the length of their upper jaw and positioned perpendicular to flow. Rorqual baleen is composed of both major (larger) and minor (smaller) keratin plates containing embedded fringe that extends into the whale's mouth, forming a filtering fringe. We used a multimodal approach, including microcomputed tomography (µCT) and scanning electron microscopy (SEM), to visualize and describe the variability in baleen anatomy across five species of rorqual whales, spanning two orders of magnitude in body length. For most morphological measurements, larger whales exhibited hypoallometry relative to body length. µCT and SEM revealed that the major and minor plates break away from the mineralized fringes at variable distances from the gums. We proposed a model for estimating the effective pore size to determine whether flow scales with body length or prey size across species. We found that pore size is likely not a proxy for prey size but instead, may reflect changes in resistance through the filter that affect fluid flow.
Collapse
|
4
|
Hierarchical modeling of elastic moduli of equine hoof wall. J Mech Behav Biomed Mater 2022; 136:105529. [PMID: 36327663 DOI: 10.1016/j.jmbbm.2022.105529] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/15/2022] [Revised: 10/09/2022] [Accepted: 10/14/2022] [Indexed: 11/06/2022]
Abstract
This study predicts analytically effective elastic moduli of substructures within an equine hoof wall. The hoof wall is represented as a composite material with a hierarchical structure comprised of a sequence of length scales. A bottom-up approach is employed. Thus, the outputs from a lower spatial scale serve as the inputs for the following scale. The models include the Halpin-Tsai model, composite cylinders model, a sutured interface model, and classical laminate theory. The length scales span macroscale, mesoscale, sub-mesoscale, microscale, sub-microscale, and nanoscale. The macroscale represents the hoof wall, consisting of tubules within a matrix at the mesoscale. At the sub-mesoscale, a single hollow tubule is reinforced by a tubule wall made of lamellae; the surrounding intertubular material also has a lamellar structure. The lamellae contain sutured and layered cells at the microscale. A single cell is made of crystalline macrofibrils arranged in an amorphous matrix at the sub-microscale. A macrofibril contains aligned crystalline rod-like intermediate filaments at the nanoscale. Experimentally obtained parameters are used in the modeling as inputs for geometry and nanoscale properties. The predicted properties of the hoof wall material agree with experimental measurements at the mesoscale and macroscale. We observe that the hierarchical structure of the hoof wall leads to a decrease in the elastic modulus with increasing scale, from the nanoscale to the macroscale. Such behavior is an intrinsic characteristic of hierarchical biological materials. This study can serve as a framework for designing impact-resistant hoof-inspired materials and structures.
Collapse
|
5
|
Lessons from Nature for Carbon‐Based Nanoarchitected Metamaterials. SMALL SCIENCE 2022. [DOI: 10.1002/smsc.202200039] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022] Open
|
6
|
Bending Study of Six Biological Models for Design of High Strength and Tough Structures. Biomimetics (Basel) 2022; 7:biomimetics7040176. [PMID: 36412704 PMCID: PMC9680280 DOI: 10.3390/biomimetics7040176] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/04/2022] [Revised: 10/12/2022] [Accepted: 10/17/2022] [Indexed: 12/14/2022] Open
Abstract
High strength and tough structures are beneficial to increasing engineering components service span. Nonetheless, improving structure strength and, simultaneously, toughness is difficult, since these two properties are generally mutually exclusive. Biological organisms exhibit both excellent strength and toughness. Using bionic structures from these biological organisms can be solutions for improving these properties of engineering components. To effectively apply biological models to design biomimetic structures, this paper analyses strengthening and toughening mechanisms of six fundamentally biological models obtained from biological organisms. Numerical models of three-point bending test are established to predict crack propagation behaviors of the six biological models. Furthermore, the strength and toughness of six biomimetic composites are experimentally evaluated. It is identified that the helical model possesses the highest toughness and satisfying strength. This work provides more detailed evidence for engineers to designate bionic models to the design of biomimetic composites with high strength and toughness.
Collapse
|
7
|
Nature-Inspired 3D Spiral Grass Structured Graphene Quantum Dots/MXene Nanohybrids with Exceptional Photothermal-Driven Pseudo-Capacitance Improvement. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2204086. [PMID: 36026560 PMCID: PMC9596846 DOI: 10.1002/advs.202204086] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/19/2022] [Indexed: 05/31/2023]
Abstract
Solar-thermal conversion is considered as a green and simple means to improve the performance of energy storage materials, but often limited by the intrinsic photothermal properties of materials and crude structure design. Herein, inspired by the unique light trapping effect of wide leaf spiral grass during photosynthesis, a biomimetic structural photothermal energy storage system is developed, to further promote the solar thermal-driven pseudo capacitance improvement. In this system, three-dimensional printed tortional Kelvin cell arrays structure with interesting light trapping property functions as "spiral leaf blades" to improve the efficiency of light absorption, while graphene quantum dots/MXene nanohybrids with wide photothermal response range and strong electrochemical activity serve as "chloroplast" for photothermal conversion and energy storage. As expected, the biomimetic structure-enhanced photothermal supercapacitor achieves an ideal solar thermal-driven pseudo capacitance enhancement (up to 304%), an ultrahigh areal capacitance of 10.47 F cm-2 , remarkable photothermal response (surface temperature change of 50.1 °C), excellent energy density (1.18 mWh cm-2 ) and cycling stability (10000 cycles). This work not only offers a novel enhancement strategy for photothermal applications, but also inspires new structure designs for multifunctional energy storage and conversion devices.
Collapse
|
8
|
Mechanically robust bamboo node and its hierarchically fibrous structural design. Natl Sci Rev 2022; 10:nwac195. [PMID: 36817831 PMCID: PMC9935994 DOI: 10.1093/nsr/nwac195] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/11/2022] [Revised: 09/09/2022] [Accepted: 09/14/2022] [Indexed: 11/14/2022] Open
Abstract
Although short bamboo nodes function in mechanical support and fluid exchange for bamboo survival, their structures are not fully understood compared to unidirectional fibrous internodes. Here, we identify the spatial heterostructure of the bamboo node via multiscale imaging strategies and investigate its mechanical properties by multimodal mechanical tests. We find three kinds of hierarchical fiber reinforcement schemes that originate from the bamboo node, including spatially tightened interlocking, triaxial interconnected scaffolding and isotropic intertwining. These reinforcement schemes, built on porous vascular bundles, microfibers and more-refined twist-aligned nanofibers, govern the structural stability of the bamboo via hierarchical toughening. In addition, the spatial liquid transport associated with these multiscale fibers within the bamboo node is experimentally verified, which gives perceptible evidence for life-indispensable multidirectional fluid exchange. The functional integration of mechanical reinforcement and liquid transport reflects the fact that the bamboo node has opted for elaborate structural optimization rather than ingredient richness. This study will advance our understanding of biological materials and provide insight into the design of fiber-reinforced structures and biomass utilization.
Collapse
|
9
|
3D Printed Biomimetic Metamaterials with Graded Porosity and Tapering Topology for Improved Cell Seeding and Bone Regeneration. Bioact Mater 2022; 25:677-688. [PMID: 37056269 PMCID: PMC10087492 DOI: 10.1016/j.bioactmat.2022.07.009] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/06/2022] [Revised: 06/23/2022] [Accepted: 07/08/2022] [Indexed: 11/22/2022] Open
Abstract
Biomimetic metallic biomaterials prepared for bone scaffolds have drawn more and more attention in recent years. However, the topological design of scaffolds is critical to cater to multi-physical requirements for efficient cell seeding and bone regeneration, yet remains a big scientific challenge owing to the coupling of mechanical and mass-transport properties in conventional scaffolds that lead to poor control towards favorable modulus and permeability combinations. Herein, inspired by the microstructure of natural sea urchin spines, biomimetic scaffolds constructed by pentamode metamaterials (PMs) with hierarchical structural tunability were additively manufactured via selective laser melting. The mechanical and mass-transport properties of scaffolds could be simultaneously tuned by the graded porosity (B/T ratio) and the tapering level (D/d ratio). Compared with traditional metallic biomaterials, our biomimetic PM scaffolds possess graded pore distribution, suitable strength, and significant improvements to cell seeding efficiency, permeability, and impact-tolerant capacity, and they also promote in vivo osteogenesis, indicating promising application for cell proliferation and bone regeneration using a structural innovation.
Collapse
|
10
|
3D printing of sponge spicules-inspired flexible bioceramic-based scaffolds. Biofabrication 2022; 14. [PMID: 35417888 DOI: 10.1088/1758-5090/ac66ff] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/01/2021] [Accepted: 04/13/2022] [Indexed: 11/12/2022]
Abstract
Bioceramics are widely used in bone tissue repair and regeneration due to their desirable biocompatibility and bioactivity. However, the brittleness of bioceramics results in difficulty of surgical operation, which greatly limits their clinical applications. The spicules of the marine sponge Euplectella aspergillum (Ea) possess high flexibility and fracture toughness resulting from concentric layered silica glued by a thin organic layer. Inspired by the unique properties of sponge spicules, flexible bioceramic-based scaffolds with spicule-like concentric layered biomimetic microstructures were constructed by combining two-dimensional (2D) bioceramics and 3D printing. 2D bioceramics could be assembled and aligned by modulating the shear force field in the direct ink writing (DIW) of 3D printing. The prepared spicules-inspired flexible bioceramic-based (SFB) scaffolds differentiated themselves from traditional 3D-printed irregular particles-based bioceramic-based scaffolds as they could be adaptably compressed, cut, folded, rolled and twisted without the occurrence of fracture, significantly breaking through the bottleneck of inherent brittleness of traditional bioceramic scaffolds. In addition, SFB scaffolds showed significantly enhanced in vitro and in vivo bone-forming bioactivity as compared to conventional β-tricalcium phosphate (β-TCP) scaffolds, suggesting that SFB scaffolds combined both of excellent mechanical and bioactive characteristics, which is believed to greatly promote the bioceramic science and their clinical applications.
Collapse
|
11
|
Abstract
Keratin is a highly multifunctional biopolymer serving various roles in nature due to its diverse material properties, wide spectrum of structural designs, and impressive performance. Keratin-based materials are mechanically robust, thermally insulating, lightweight, capable of undergoing reversible adhesion through van der Waals forces, and exhibit structural coloration and hydrophobic surfaces. Thus, they have become templates for bioinspired designs and have even been applied as a functional material for biomedical applications and environmentally sustainable fiber-reinforced composites. This review aims to highlight keratin's remarkable capabilities as a biological component, a source of design inspiration, and an engineering material. We conclude with future directions for the exploration of keratinous materials.
Collapse
|
12
|
Periodic Stratified Porous Structures in Dynamic Polyelectrolyte Films Through Standing-Wave Optical Crosslinking for Structural Color. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2021; 8:e2100402. [PMID: 34047069 PMCID: PMC8336486 DOI: 10.1002/advs.202100402] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/31/2021] [Revised: 04/05/2021] [Indexed: 06/12/2023]
Abstract
Periodic porous structures have been introduced into functional films to meet the requirements of various applications. Though many approaches have been developed to generate desired structures in polymeric films, few of them can effectively and dynamically achieve periodic porous structures. Here, a facile way is proposed to introduce periodic stratified porous structures into polyelectrolyte films. A photo-crosslinkable polyelectrolyte film of poly(ethylenimine) (PEI) and photoreactive poly(acrylic acid) derivative (PAA-N3 ) is prepared by layer-by-layer (LbL) self-assembly. Stratified crosslinking of the PEI/PAA-N3 film is generated basing on standing-wave optics. The periodic stratified porous structure is constructed by forming pores in noncrosslinked regions in the film. Thanks to the dynamic mobility of polyelectrolytes, this structural controlment can be repeated several times. The size of pores corresponding to the layer spacing of the film contributes to the structural colors. Furthermore, structural color patterns are fabricated in the film by selective photo-crosslinking using photomasks. Although the large-scale structural controlment in thick (micron-scale and above) films needs to be explored further, this work highlights the periodic structural controlment in polymeric films and thus presents an approach for application potentials in sensor, detection, and ink-free printing.
Collapse
|
13
|
Biological and bioinspired materials: Structure leading to functional and mechanical performance. Bioact Mater 2020; 5:745-757. [PMID: 32637739 PMCID: PMC7317171 DOI: 10.1016/j.bioactmat.2020.06.003] [Citation(s) in RCA: 34] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/20/2020] [Revised: 05/27/2020] [Accepted: 06/06/2020] [Indexed: 12/12/2022] Open
Abstract
Nature has achieved materials with properties and mechanisms that go far beyond the current know-how of the engineering-materials industry. The remarkable efficiency of biological materials, such as their exceptional properties that rely on weak constituents, high performance per unit mass, and diverse functionalities in addition to mechanical properties, has been mostly attributed to their hierarchical structure. Key strategies for bioinspired materials include formulating the fundamental understanding of biological materials that act as inspiration, correlating this fundamental understanding to engineering needs/problems, and fabricating hierarchically structured materials with enhanced properties accordingly. The vast, existing literature on biological and bioinspired materials can be discussed in terms of functional and mechanical aspects. Through essential representative properties and materials, the development of bioinspired materials utilizes the design strategies from biological systems to innovatively augment material performance for various practical applications, such as marine, aerospace, medical, and civil engineering. Despite the current challenges, bioinspired materials have become an important part in promoting innovations and breakthroughs in the modern materials industry.
Collapse
|
14
|
Polymer-Controlled Growth and Wrapping of Perovskite Single Crystals Leading to Better Device Stability and Performance. ACS APPLIED MATERIALS & INTERFACES 2020; 12:25011-25019. [PMID: 32388977 DOI: 10.1021/acsami.0c04346] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
A commodity-scale polymer is used for controlling the nucleation and growth of single crystals of organolead halide perovskite. The polymer [polystyrene (PS)] cross-links and strongly interacts with PbI2 and MAI (MAPbI3 perovskite precursors) resulting in the control of the crystallization process. The PS concentration modulates the nucleation time, crystal size, and the number of perovskite single crystals. In addition, the PS-based MAPbI3 crystals show an enhanced performance as well as improved thermal and environmental stability. Specifically, the PS-MAPbI3 crystals show 3 times higher photocurrent than plain MAPbI3 crystals and maintain a stable structure for more than 50 days (1200 h) under continuous 0.1 sun illumination in the air with a relative humidity of 40-45%. The improved performance and stability are attributed to the direct interaction between the PS and perovskite, which greatly reduces the ion migration, defect traps, and charge recombination and improves the carrier mobility and lifetime.
Collapse
|
15
|
3D Printing of Bioinspired Biomaterials for Tissue Regeneration. Adv Healthc Mater 2020; 9:e2000208. [PMID: 32338464 DOI: 10.1002/adhm.202000208] [Citation(s) in RCA: 29] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/09/2020] [Revised: 03/14/2020] [Accepted: 03/25/2020] [Indexed: 02/06/2023]
Abstract
Biological systems, which possess remarkable functions and excellent properties, are gradually becoming a source of inspiration for the fabrication of advanced tissue regeneration biomaterials due to their hierarchical structures and novel compositions. It would be meaningful to learn and transfer the characteristics of creatures to biomaterials design. However, traditional strategies cannot satisfy the design requirements of the complicated bioinspired materials for tissue regeneration. 3D printing, as a rapidly developing new technology that can accurately achieve multimaterial and multiscale fabrication, is capable of optimizing the fabrication of bioinspired materials with complex composition and structure. This review summarizes the recent developments in 3D-printed bioinspired biomaterials for multiple tissue regeneration, and especially highlights the progresses on i) traditional bioinspired designs for biomaterials fabrication, ii) biological composition inspired designs for the 3D-printed biomaterials, and iii) biological structure inspired designs for the 3D-printed biomaterials. Finally, the challenges and prospects for the development of 3D-printed bioinspired biomaterials are discussed.
Collapse
|
16
|
Deiminated proteins and extracellular vesicles - Novel serum biomarkers in whales and orca. COMPARATIVE BIOCHEMISTRY AND PHYSIOLOGY D-GENOMICS & PROTEOMICS 2020; 34:100676. [PMID: 32114311 DOI: 10.1016/j.cbd.2020.100676] [Citation(s) in RCA: 16] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/30/2019] [Revised: 01/16/2020] [Accepted: 02/17/2020] [Indexed: 02/06/2023]
Abstract
Peptidylarginine deiminases (PADs) are a family of phylogenetically conserved calcium-dependent enzymes which cause post-translational protein deimination. This can result in neoepitope generation, affect gene regulation and allow for protein moonlighting via functional and structural changes in target proteins. Extracellular vesicles (EVs) carry cargo proteins and genetic material and are released from cells as part of cellular communication. EVs are found in most body fluids where they can be useful biomarkers for assessment of health status. Here, serum-derived EVs were profiled, and post-translationally deiminated proteins and EV-related microRNAs are described in 5 ceataceans: minke whale, fin whale, humpback whale, Cuvier's beaked whale and orca. EV-serum profiles were assessed by transmission electron microscopy and nanoparticle tracking analysis. EV profiles varied between the 5 species and were identified to contain deiminated proteins and selected key inflammatory and metabolic microRNAs. A range of proteins, critical for immune responses and metabolism were identified to be deiminated in cetacean sera, with some shared KEGG pathways of deiminated proteins relating to immunity and physiology, while some KEGG pathways were species-specific. This is the first study to characterise and profile EVs and to report deiminated proteins and putative effects of protein-protein interaction networks via such post-translationald deimination in cetaceans, revealing key immune and metabolic factors to undergo this post-translational modification. Deiminated proteins and EVs profiles may possibly be developed as new biomarkers for assessing health status of sea mammals.
Collapse
|
17
|
Evaluating the hierarchical, hygroscopic deformation of the Daucus carota umbel through structural characterization and mechanical analysis. Acta Biomater 2019; 99:457-468. [PMID: 31525536 DOI: 10.1016/j.actbio.2019.09.012] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/25/2019] [Revised: 09/09/2019] [Accepted: 09/11/2019] [Indexed: 12/27/2022]
Abstract
Many physically immobile plants develop passive yet ingenious strategies for active seed dispersal through self-deformation in response to external stimuli, such as humidity. These hygroscopic deformations are usually driven by the internal heterogeneous architecture, which provides valuable, inspiring information for the development of novel actuating systems. The Daucus carota compound umbel is an interesting structure showing a distinct hygroscopic deformation that operates at hierarchical levels among these plants. Here, we investigate the structure of the primary and secondary rays of the umbel associated with their deformation through mechanical analyses. We reveal that through controlling both the cellulose microfibril angle (MFA) and lignification, the multi-level bending behavior of the umbel is achieved, which contributes to efficient seed protection and dispersal. The primary rays generally show more significant bending curvature changes than the secondary rays, and within each level, the outer rays exhibit a larger motion amplitude than the middle and inner rays. Mechanical testing and theoretical analysis support that adjusting the lignin content within the ray structure compensates for the effect of the small differences in cellulose MFA on its bending behavior, which contributes to the overall hygroscopic deformation. Findings also show that the primary outer ray can generate reaction forces that are more than 700 times its weight, which is higher than that for the pine cone scales. The new insights from this work are instructive for bioinspired designs of complex, self-deforming structures and devices. STATEMENT OF SIGNIFICANCE: The carrot (Daucus carota) compound umbels exhibit a unique hierarchical, hygroscopic deformation for seed dispersal among immobile plants. In this work, we elucidate that the multi-level bending behavior of the umbel is achieved through manipulating the cellulose microfibril angle (MFA) and lignification of the primary and secondary rays for the first time. We also discover that adjusting the degree of lignification compensates for the effect of small cellulose MFA differences on the bending behavior theoretically and experimentally. The primary outer rays deform in a highly efficient manner, in which reactions forces about more than 700 times its weight are generated. The findings presented are instructive for bioinspired designs of complex, self-deforming structures and devices.
Collapse
|
18
|
Toward High Fidelity Materials Property Prediction from Multiscale Modeling and Simulation. ADVANCED THEORY AND SIMULATIONS 2019. [DOI: 10.1002/adts.201900122] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/31/2023]
|
19
|
Compressive deformation and failure of trabecular structures in a turtle shell. Acta Biomater 2019; 97:535-543. [PMID: 31310853 DOI: 10.1016/j.actbio.2019.07.023] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/01/2019] [Revised: 07/08/2019] [Accepted: 07/11/2019] [Indexed: 12/22/2022]
Abstract
Turtle shells comprising of cortical and trabecular bones exhibit intriguing mechanical properties. In this work, compression tests were performed using specimens made from the carapace of Kinixys erosa turtle. A combination of imaging techniques and mechanical testing were employed to examine the responses of hierarchical microstructures of turtle shell under compression. Finite element models produced from microCT-scanned microstructures and analytical foam structure models were then used to elucidate local responses of trabecular bones deformed under compression. The results reveal the contributions from micro-strut bending and stress concentrations to the fractural mechanisms of trabecular bone structures. The porous structures of turtle shells could be an excellent prototype for the bioinspired design of deformation-resistant structures. STATEMENT OF SIGNIFICANCE: In this study, a combination of analytical, computational models and experiments is used to study the underlying mechanisms that contribute to the compressive deformation of a Kinixys erosa turtle shell between the nano-, micro- and macro-scales. The proposed work shows that the turtle shell structures can be analyzed as sandwich structures that have the capacity to concentrate deformation and stresses within the trabecular bones, which enables significant energy absorption during compressive deformation. Then, the trends in the deformation characteristics and the strengths of the trabecular bone segments are well predicted by the four-strut model, which captures the effects of variations in strut length, thickness and orientation that are related to microstructural uncertainties of the turtle shells. The above results also suggest that the model may be used to guide the bioinspired design of sandwich porous structures that mimic the properties of the cortical and trabecular bone segments of turtle shells under a range of loading conditions.
Collapse
|