Topotactic Transformations in an Icosahedral Nanocrystal to Form Efficient Water-Splitting Catalysts

Atomic Ga triggers spatiotemporal coordination of oxygen radicals for efficient water oxidation on crystalline RuO2

Advancements in proton-exchange membrane water electrolyzer depend on developing oxygen evolution reaction electrocatalysts that synergize high activity with stability. Here, we introduce an approach aimed at elevating oxygen evolution reaction performance by enhancing the spatiotemporal coordination of oxygen radicals to promote efficient O-O coupling. A dense, single-atom configuration of oxygen radical donors within interconnected RuO2 nanocrystal framework is demonstrated. The stable oxygen radicals on gallium sites with adaptable Ga-O bonds are thermodynamically favorable to attract those from Ru sites, addressing dynamic adaptation challenges and boosting O-O coupling efficiency. The optimized catalyst achieves a low overpotential of 188 mV at 10 mA cm-2, operates robustly for 800 h at 100 mA cm-2 in acidic conditions, and shows a large current density of 3 A cm-2 at 1.788 V, with stable performance at 0.5 A cm-2 for 200 h, confirming its long-term viability in proton-exchange membrane water electrolyzer applications.

Atomic-level Ru-Ir mixing in rutile-type (RuIr)O2 for efficient and durable oxygen evolution catalysis

The success of proton exchange membrane water electrolysis (PEMWE) depends on active and robust electrocatalysts to facilitate oxygen evolution reaction (OER). Heteroatom-doped-RuOx has emerged as a promising electrocatalysts because heteroatoms suppress lattice oxygen participation in the OER, thereby preventing the destabilization of surface Ru and catalyst degradation. However, identifying suitable heteroatoms and achieving their atomic-scale coupling with Ru atoms are nontrivial tasks. Herein, to steer the reaction pathway away from the involvement of lattice oxygen, we integrate OER-active Ir atoms into the RuO2 matrix, which maximizes the synergy between stable Ru and active Ir centers, by leveraging the changeable growth behavior of Ru/Ir atoms on lattice parameter-modulated templates. In PEMWE, the resulting (RuIr)O2/C electrocatalysts demonstrate notable current density of 4.96 A cm-2 and mass activity of 19.84 A mgRu+Ir-1 at 2.0 V. In situ spectroscopic analysis and computational calculations highlight the importance of the synergistic coexistence of Ru/Ir-dual-OER-active sites for mitigating Ru dissolution via the optimization of the binding energy with oxygen intermediates and stabilization of Ru sites.

Modulating *OOH Adsorption on RuO2 for Efficient and Durable Acidic Water Oxidation Electrocatalysis

Acidic water electrolysis is of considerable interest due to its higher current density operation and energy conversion efficiency, but its real industrial application is highly limited by the shortage of efficient, stable, and cost-effective acidic oxygen evolution reaction (OER) electrocatalysts. Here, an electrocatalyst consisting of Ni-implanted RuO2 supported is reported on α-MnO2 (MnO2/RuO2-Ni) that shows high activity and remarkable durability in acidic OER. Precisely, the MnO2/RuO2-Ni catalyst shows an overpotential of 198 mV at a current density of 10 mA cm-2 and can operate continuously and stably for 400 h (j = 10 mA cm-2) without any obvious attenuation of activity, making it one of the best-performing acid-stable OER catalysts. Experimental results, in conjunction with density functional theory calculations, demonstrate that the interface electron transfer effect from RuO2 to MnO2, further enhanced by Ni incorporation, effectively modulates the adsorption of OOH* and significantly reduces the overpotential, thereby enhancing catalytic activity and durability.

Icosahedral supracrystal assembly from polymer-grafted nanoparticles via interplay of interfacial energy and confinement effect

Self-assembly of nanoparticles (NPs) in drying emulsion droplets paves the way for intricate three-dimensional (3D) superstructures, given the myriad of control parameters for fine-tuning assembly conditions. With their substantial energetic dynamics that are acutely responsive to emulsion confinements, polymeric ligands incorporated into a system can enrich its structural diversity. Here, we demonstrate the assembly of soft polymer-grafted NPs into Mackay icosahedrons beyond spherical body-centered cubic (BCC) packing structures commonly observed for these soft spheres. This behavior is governed by the free energy minimization within emulsions through the interplay of the oil-water interfacial energy and confinement effect as demonstrated by the experimental observations of structural transitions between icosahedrons and BCC crystals and by corresponding free energy calculations. The anisotropic surface of the icosahedral supracrystals provides the capability of guiding the position of a secondary constituent, creating unique hybrid patchy icosahedrons with the potential to develop into multifunctional 3D clusters that combine the benefits of both polymers and conventional colloids.

Biomineralization of Sulfate-Reducing Bacteria In Situ-Induced Preparation of Nano Fe2O3-Fe(Ni)S/C as High-Efficiency Oxygen Evolution Electrocatalyst

Transition metal-based catalysts possess high catalytic activity for oxygen evolution reaction (OER). However, the preparation of high-performance OER electrocatalysts using simple strategies with a low cost still faces a major challenge. Herein, this work presents an innovative, in situ-induced preparation of the Fe2O3, FeS, and NiS nanoparticles, supported on carbon blacks (CBs) (denoted as Fe2O3-Fe(Ni)S/C) as a high-efficiency oxygen evolution electrocatalyst by employing biomineralization. Biomineralization, a simple synthesis strategy, demonstrates a huge advantage in controlling the size of the Fe2O3 and Fe(Ni)S nanoparticles, as well as achieving uniform nanoparticle distribution on carbon blacks. It is found that the electrocatalyst Fe2O3-Fe(Ni)S/C-200 shows a good OER electrocatalytic activity with a small loading capacity, and it has a small overpotential and Tafel slope in 1 m KOH solution with values of 264 mV and 42 mV dec-1, respectively, at a current density of 10 mA cm-2. Additionally, it presents good electrochemical stability for over 24 h. The remarkable and robust electrocatalytic performance of Fe2O3-Fe(Ni)S/C-200 is attributed to the synergistic effect of Fe2O3, FeS, and doped-Ni species as well as its distinct 3D spherical structure. This approach indicates the promising applications of biomineralization for the bio-preparation of functional materials and energy conversion.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

The Promising Seesaw Relationship Between Activity and Stability of Ru-Based Electrocatalysts for Acid Oxygen Evolution and Proton Exchange Membrane Water Electrolysis

The development of electrocatalysts that are not reliant on iridium for efficient acid-oxygen evolution is a critical step towards the proton exchange membrane water electrolysis (PEMWE) and green hydrogen industry. Ruthenium-based electrocatalysts have garnered widespread attention due to their remarkable catalytic activity and lower commercial price. However, the challenge lies in balancing the seesaw relationship between activity and stability of these electrocatalysts during the acid-oxygen evolution reaction (OER). This review delves into the progress made in Ru-based electrocatalysts with regards to acid OER and PEMWE applications. It highlights the significance of customizing the acidic OER mechanism of Ru-based electrocatalysts through the coordination of adsorption evolution mechanism (AEM) and lattice oxygen oxidation mechanism (LOM) to attain the ideal activity and stability relationship. The promising tradeoffs between the activity and stability of different Ru-based electrocatalysts, including Ru metals and alloys, Ru single-atomic materials, Ru oxides, and derived complexes, and Ru-based heterojunctions, as well as their applicability to PEMWE systems, are discussed in detail. Furthermore, this paper offers insights on in situ control of Ru active sites, dynamic catalytic mechanism, and commercial application of PEMWE. Based on three-way relationship between cost, activity, and stability, the perspectives and development are provided.

RuO2 electronic structure and lattice strain dual engineering for enhanced acidic oxygen evolution reaction performance

Developing highly active and durable electrocatalysts for acidic oxygen evolution reaction remains a great challenge due to the sluggish kinetics of the four-electron transfer reaction and severe catalyst dissolution. Here we report an electrochemical lithium intercalation method to improve both the activity and stability of RuO₂ for acidic oxygen evolution reaction. The lithium intercalates into the lattice interstices of RuO₂, donates electrons and distorts the local structure. Therefore, the Ru valence state is lowered with formation of stable Li-O-Ru local structure, and the Ru–O covalency is weakened, which suppresses the dissolution of Ru, resulting in greatly enhanced durability. Meanwhile, the inherent lattice strain results in the surface structural distortion of Li_xRuO₂ and activates the dangling O atom near the Ru active site as a proton acceptor, which stabilizes the OOH* and dramatically enhances the activity. This work provides an effective strategy to develop highly efficient catalyst towards water splitting.

While water splitting in acid offers higher operational performances than in alkaline conditions, there are few high-activity, acid-stable oxygen evolution electrocatalysts. Here, authors examine electrochemical Li intercalation to improve the activity and stability of RuO₂ for acidic water oxidation.

Bifunctional WC-Supported RuO2 Nanoparticles for Robust Water Splitting in Acidic Media

We report the strong catalyst-support interaction in WC-supported RuO₂ nanoparticles (RuO₂ -WC NPs) anchored on carbon nanosheets with low loading of Ru (4.11 wt.%), which significantly promotes the oxygen evolution reaction activity with a η₁₀ of 347 mV and a mass activity of 1430 A g_Ru ^-1 , eight-fold higher than that of commercial RuO₂ (176 A g_Ru ^-1 ). Theoretical calculations demonstrate that the strong catalyst-support interaction between RuO₂ and the WC support could optimize the surrounding electronic structure of Ru sites to reduce the reaction barrier. Considering the likewise excellent catalytic ability for hydrogen production, an acidic overall water splitting (OWS) electrolyzer with a good stability constructed by bifunctional RuO₂ -WC NPs only requires a cell voltage of 1.66 V to afford 10 mA cm^-2 . The unique 0D/2D nanoarchitectures rationally combining a WC support with precious metal oxides provides a promising strategy to tradeoff the high catalytic activity and low cost for acidic OWS applications.

Self-Assembled Pt/MoCx/MWCNTs Nano Catalyst for Ethanol Electrooxidation of Fuel Cells

Direct ethanol fuel cells (DEFCs) have attracted more and more attention because of their unique advantages such as low cost and low toxicity. However, sluggish C-C bond cleavage during the ethanol electrooxidation reaction (EOR) in acidic media results in a lower energy yield and gravely hinders the commercialization of DEFCs. Therefore, it is very necessary to develop an anode catalyst with high performance, high stability and low cost to solve this problem. In this paper, Pt/MoC_x/MWCNTs nanocomposites with different mass ratios of PtMo were obtained through a molecular self-assembly technology. The structure and morphology of Pt/MoC_x/MWCNTs nanocomposites were characterized by several techniques such as XRD, FESEM, XPS, etc. The electrochemical performance and stability of Pt/WC_x/MWCNTs electrocatalysts toward EOR were investigated in acid electrolytes. The results show that PtMo exists in the form of alloy. The size of Pt/MoC_x nanoparticles is very uniform with an average size of ∼24 nm. The Pt/MoC_0.25/MWCNTs exhibits excellent electrocatalytic activities with an electrochemically active surface area of 37.1 m² g⁻¹, a peak current density of 610.4 mA mg_Pt⁻¹ and a steady-state current density of 39.8 mA mg_Pt⁻¹ after 7,200 s, suggesting that the Pt/MoC_0.25/MWCNTs is a very promising candidate for application in EOR of DEFCs.

Chemical Fields: Directing Atom Migration in the Multiphasic Nanocrystal

ConspectusAtoms in a bulk solid phase are usually trapped to fixed positions and can change their position only under certain conditions (e.g., at a melting point) due to the high energy barrier of migration between positions within the crystal lattice. Contrary to the atoms in the bulk solid phase, however, atoms in nanoparticles can migrate and change their local positions rather easily, enabled by the high surface energies. The energy states of surface atoms of nanoparticles can be altered by surface-binding moieties, which in turn influence the intrananoparticle migration of atoms at the subsurface of nanoparticles. In 2008, this possibility of intrananoparticle migration was demonstrated with RhPd alloy nanoparticles under the different gas environments of reductive CO or oxidative NO. We envisaged that the explosive expansion of well-defined, multiphasic nanoparticle libraries might be realized by specifically dictating the atom migration direction, by modulating the energy state of specific atoms in the multiphasic nanocrystals. The nanoparticle surface energy is a function of a myriad of factors, namely, surface binding moiety, structural features affecting coordination number of atoms such as nanoparticle geometry, steps, and kinks, and the existence of heterointerface with lattice mismatch. Therefore, all these factors affecting atom energy state in the nanoparticle, categorically termed as "chemical field" (CF), can serve as the driving force for purposeful directional movement of atoms within nanoparticles and subsequent reaction. Geometrically well-defined multiphasic nanocrystals present great promises toward various applications with special emphasis on catalysis and thus are worthy synthetic targets. In recent years, we have demonstrated that manipulation of CFs is an effective synthetic strategy for a variety of geometrically well-defined multiphasic nanocrystals. Herein, we classified multiphasic nanocrystals into metallic alloy systems and ionic systems (metal compounds) because the modes of CF are rather different between these two systems. The migration-directing CFs for neutral metallic atoms are mostly based on the local distribution of elements, degree of alloying, or highly energetic structural features. On the other hand, for the ionic system, structural parameters originating from the discrepancy between cations and anions should be more considered; ionic radii, phase stability, lattice strain, anionic frameworks, cation vacancies, etc. can react as CFs affecting atom migration behavior in the multiphasic ionic nanocrystals. We expect that the limits and potentials of CF-based synthesis of multiphasic nanocrystals described in this work will open a wide avenue to diverse material compositions and geometries, which have been difficult or impossible to approach via conventional nanoparticle synthesis schemes.

Single-site Pt-doped RuO2 hollow nanospheres with interstitial C for high-performance acidic overall water splitting

Realizing stable and efficient overall water splitting is highly desirable for sustainable and efficient hydrogen production yet challenging because of the rapid deactivation of electrocatalysts during the acidic oxygen evolution process. Here, we report that the single-site Pt-doped RuO₂ hollow nanospheres (SS Pt-RuO₂ HNSs) with interstitial C can serve as highly active and stable electrocatalysts for overall water splitting in 0.5 M H₂SO₄. The performance toward overall water splitting have surpassed most of the reported catalysts. Impressively, the SS Pt-RuO₂ HNSs exhibit promising stability in polymer electrolyte membrane electrolyzer at 100 mA cm^-2 during continuous operation for 100 hours. Detailed experiments reveal that the interstitial C can elongate Ru-O and Pt-O bonds, and the presence of SS Pt can readily vary the electronic properties of RuO₂ and improve the OER activity by reducing the energy barriers and enhancing the dissociation energy of ^*O species.

In Situ/Operando Insights into the Stability and Degradation Mechanisms of Heterogeneous Electrocatalysts

The further commercialization of renewable energy conversion and storage technologies requires heterogeneous electrocatalysts that meet the exacting durability target. Studies of the stability and degradation mechanisms of electrocatalysts are expected to provide important breakthroughs in stability issues. Accessible in situ/operando techniques performed under realistic reaction conditions are therefore urgently needed to reveal the nature of active center structures and establish links between the structural motifs in a catalyst and its stability properties. This review highlights recent research advances regarding in situ/operando techniques and improves the understanding of the stabilities of advanced heterogeneous electrocatalysts used in a diverse range of electrochemical reactions; it also proposes some degradation mechanisms. The review concludes by offering suggestions for future research.

Mn-Dopant Differentiating the Ru and Ir Oxidation States in Catalytic Oxides Toward Durable Oxygen Evolution Reaction in Acidic Electrolyte

Designing an efficient and durable electrocatalyst for the sluggish oxygen evolution reaction (OER) at the anode remains the foremost challenge in developing proton exchange membrane (PEM) electrolyzers. Here, a highly active and durable cactus-like nanoparticle with an exposed heterointerface between the IrO₂ and the low oxidation state Ru by introducing a trace amount of Mn dopant is reported. The heterostructure fabrication relies on initial mixing of the Ru and Ir phases before electrochemical oxidation to produce a conjoined Ru/IrO₂ heterointerface. Benefitting from electron transfer at the heterointerface, the low oxidation state Ru species shows excellent initial activity, which is maintained even after 180 h of continuous OER test. In a half-cell test, the Mn-doped RuIr nanocactus (Mn-RuIr NCT) achieves a mass activity of 1.85 A mg_Ir+Ru ^-1 at 1.48 V_RHE , which is 139-fold higher than that of commercial IrO₂ . Moreover, the superior electrocatalytic performance of Mn-RuIr NCT in the PEM electrolysis system ensures its viability in practical uses. The results of the excellent catalytic performance for acidic OER indicate that the heterostructuring robust rutile IrO₂ and the highly active Ru species with a low oxidation state on the catalyst surface drive a synergistic effect.

Recent Progress in Advanced Electrocatalyst Design for Acidic Oxygen Evolution Reaction

Proton exchange membrane (PEM) water electrolyzers hold great significance for renewable energy storage and conversion. The acidic oxygen evolution reaction (OER) is one of the main roadblocks that hinder the practical application of PEM water electrolyzers. Highly active, cost-effective, and durable electrocatalysts are indispensable for lowering the high kinetic barrier of OER to achieve boosted reaction kinetics. To date, a wide spectrum of advanced electrocatalysts has been designed and synthesized for enhanced acidic OER performance, though Ir and Ru based nanostructures still represent the state-of-the-art catalysts. In this Progress Report, recent research progress in advanced electrocatalysts for improved acidic OER performance is summarized. First, fundamental understanding about acidic OER including reaction mechanisms and atomic understanding to acidic OER for rational design of efficient electrocatalysts are discussed. Thereafter, an overview of the progress in the design and synthesis of advanced acidic OER electrocatalysts is provided in terms of catalyst category, i.e., metallic nanostructures (Ir and Ru based), precious metal oxides, nonprecious metal oxides, and carbon based nanomaterials. Finally, perspectives to the future development of acidic OER are provided from the aspects of reaction mechanism investigation and more efficient electrocatalyst design.

Zr-doped CoFe-layered double hydroxides for highly efficient seawater electrolysis

Efficient generation of hydrogen from electrocatalytic water-splitting is of great importance to realize the hydrogen economy. In that field, designing efficient and bifunctional electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is critical for water splitting. With the increasing demands for bifunctional catalysts, a universal strategy in favor of these catalytic processes is particularly important. Herein, a variety of Zr-doped layered double hydroxide (LDH) with low-crystalline grown on nickel foam (NF) is designed to promote the bifunctional activities of electrocatalysts. It is found that the doping of Zr⁴⁺ into CoFe-LDH/NF can tune the electronic structure and also expose abundant catalytic active sites to enhance the electrocatalytic activities. In 1 M KOH, the as-prepared CoFeZr/NF exhibits superior OER and HER activities with low overpotentials of 233 and 159 mV at 10 mA cm^-2. When tested in alkaline simulated seawater electrolyte, CoFeZr/NF also shows high catalytic activities with almost no attenuation when compared with that in 1.0 M KOH. This work will provide a new way for the development of seawater electrolysis for large-scale hydrogen production.

Recent Development of Oxygen Evolution Electrocatalysts in Acidic Environment

The proton exchange membrane (PEM) water electrolysis is one of the most promising hydrogen production techniques. The oxygen evolution reaction (OER) occurring at the anode dominates the overall efficiency. Developing active and robust electrocatalysts for OER in acid is a longstanding challenge for PEM water electrolyzers. Most catalysts show unsatisfied stability under strong acidic and oxidative conditions. Such a stability challenge also leads to difficulties for a better understanding of mechanisms. This review aims to provide the current progress on understanding of OER mechanisms in acid, analyze the promising strategies to enhance both activity and stability, and summarize the state-of-the-art catalysts for OER in acid. First, the prevailing OER mechanisms are reviewed to establish the physicochemical structure-activity relationships for guiding the design of highly efficient OER electrocatalysts in acid with stable performance. The reported approaches to improve the activity, from macroview to microview, are then discussed. To analyze the problem of instability, the key factors affecting catalyst stability are summarized and the surface reconstruction is discussed. Various noble-metal-based OER catalysts and the current progress of non-noble-metal-based catalysts are reviewed. Finally, the challenges and perspectives for the development of active and robust OER catalysts in acid are discussed.

Core-Shell Structured PtxMoy@TiO2 Nanoparticles Synthesized by Reverse Microemulsion for Methanol Electrooxidation of Fuel Cells

The high price of catalyst and poor durability still restrict the development of fuel cells. In this work, core-shell structured Pt_xMo_y@TiO₂ nanoparticles with low Pt content are prepared by a reverse microemulsion method. The morphologies, particle size, structure, and composition of Pt_xMo_y@TiO₂ nanoparticles are examined by several techniques such as X-ray Diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy, etc. The Pt_xMo_y@TiO₂ electrocatalysts show significantly higher catalytic activity and better durability for methanol oxidation than the commercial Pt/C (ETEK). Compared to Pt/C catalyst, the enhancement of the electrochemical performance of Pt_xMo_y@TiO₂ electrocatalysts can be attributed to the core-shell structure and the shift of the d-band center of Pt atoms, which can weaken the adsorption strength toward CO molecules, facilitate the removal of the CO groups and improve electrocatalytic activity. The development of Pt_xMo_y@TiO₂ electrocatalysts is promising to reduce the use of noble metal Pt and has a great potential for application in fuel cells.

Ion-biosorption induced core–shell Fe2P@carbon nanoparticles decorated on N, P co-doped carbon materials for the oxygen evolution reaction

This work employs bacteria as precursors and induces a cost-effective biosorption strategy to obtain Fe₂P@carbon nanoparticles decorated on N and P co-doped carbon (Fe₂P@CNPs/NPC) materials.

Construction of self-supporting bimetallic sulfide arrays as a highly efficient electrocatalyst for bifunctional electro-oxidation

Bimetal nickel–cobalt sulfide nanosheets grown on nickel foam (NCS/NF) exhibit superior OER and UOR activities with low potentials of 1.46 and 1.31 V at 10 mA cm−2, and even good activity in alkaline water electrolytes.

Selective Loading of Atomic Platinum on a RuCeOx Support Enables Stable Hydrogen Evolution at High Current Densities

High-performance electrocatalysts for the hydrogen evolution reaction (HER) have an important role to play in the development of renewable energy. Platinum remains the most efficient known HER electrocatalyst. Therefore, it is necessary to find ways to maximize Pt utilization in actual practical applications. Herein we demonstrate a facile strategy for synthesizing RuCeO_x -supported, selectively loaded, atomic Pt (0.49 wt. %) (denoted Pt/RuCeO_x -PA) by photoactivation at ambient temperature and pressure. Through the photoelectron transfer at the Mott-Schottky heterojunction in RuCeO_x , Pt atoms became embedded into the RuO₂ lattice. The resulting selectively loaded Pt-O-Ru moieties in Pt/RuCeO_x -PA give a stronger hydrogen spillover effect than Pt complexes randomly loaded by either chemical activation or thermal activation. As a result, Pt/RuCeO_x -PA shows superior HER performance to the materials prepared by random loading and is even better than a commercial Pt/C catalyst with much higher Pt loading (20 wt. %) at high current densities (from 50-600 mA cm^-2 ).

Catalytic Nanoframes and Beyond

The ever-increasing need for the production and expenditure of sustainable energy is a result of the astonishing rate of consumption of fossil fuels and the accompanying environmental problems. Emphasis is being directed to the generation of sustainable energy by the fuel cell and water splitting technologies. Accordingly, the development of highly efficient electrocatalysts has attracted significant interest, as the fuel cell and water splitting technologies are critically dependent on their performance. Among numerous catalyst designs under investigation, nanoframe catalysts have an intrinsically large surface area per volume and a tunable composition, which impacts the number of catalytically active sites and their intrinsic catalytic activity, respectively. Nevertheless, the structural integrity of the nanoframe during electrochemical operation is an ongoing concern. Some significant advances in the field of nanoframe catalysts have been recently accomplished, specifically geared to resolving the catalytic stability concerns and significantly boosting the intrinsic catalytic activity of the active sites. Herein, general synthetic concepts of nanoframe structures and their structure-dependent catalytic performance are summarized, along with recent notable advances in this field. A discussion on the remaining challenges and future directions, addressing the limitations of nanoframe catalysts, are also provided.

Fundamental understanding of the acidic oxygen evolution reaction: mechanism study and state-of-the-art catalysts

The oxygen evolution reaction (OER), as the anodic reaction of water electrolysis (WE), suffers greatly from low reaction kinetics and thereby hampers the large-scale application of WE. Seeking active, stable, and cost-effective OER catalysts in acidic media is therefore of great significance. In this perspective, studying the reaction mechanism and exploiting advanced anode catalysts are of equal importance, where the former provides guidance for material structural engineering towards a better catalytic activity. In this review, we first summarize the currently proposed OER catalytic mechanisms, i.e., the adsorbate evolution mechanism (AEM) and lattice oxygen evolution reaction (LOER). Subsequently, we critically review several acidic OER electrocatalysts reported recently, with focus on structure-performance correlation. Finally, a few suggestions on exploring future OER catalysts are proposed.

Electronic modulation of novel W18O49 nanoshuttles for efficient hydrogen evolution reaction

Research on transition metal oxides for hydrogen evolution reaction (HER) is challenging due to their poor electrical conductivity and weak hydrogen adsorption. In this paper, a class of W18O49 nanoshuttles (NSs) with highly bifurcated structure at both ends were synthesized via a hydrothermal method for highly efficient HER. By simply introducing Nb and Pt components, W18O49 can achieve optimal hydrogen adsorption through electronic modulation. The optimized NbPt/W18O49 NSs show an extremely low overpotential of 37 mV to obtain 10 mA cm-2 and an unprecedented small Tafel slope of 23 mV dec-1, superior to commercial Pt/C. The NbPt/W18O49 NSs can endure long-term stability for 18 h with negligible morphology change and performance degradation. Based on the surface valence band spectra of x-ray photoelectron spectroscopy and density functional theory calculations, the improved HER activity is closely related to the optimization of hydrogen binding energy on active sites and activation of inert O sites of W18O49. This study opens a facile avenue of electronic modulation to promote electrocatalytic performance.

Robust Interface Ru Centers for High-Performance Acidic Oxygen Evolution

RuO₂ is considered as the state-of-the-art electrocatalyst for the oxygen evolution reaction (OER) in acidic media. However, its practical application is largely hindered by both the high reaction overpotential and severe electrochemical corrosion of the active centers. To overcome these limitations, innovative design strategies are necessary, which remains a great challenge. Herein, robust interface Ru centers between RuO₂ and graphene, via a controllable oxidation of graphene encapsulating Ru nanoparticles, are presented to efficiently enhance both the activity and stability of the acidic OER. Through precisely controlling the reaction interface, a much lower OER overpotential of only 227 mV at 10 mA cm^-2 in acidic electrolyte, compared with that of 290 mV for commercial RuO₂ , but a significantly higher durability than the commercial RuO₂ , are achieved. Density functional theory (DFT) calculations reveal that the interface Ru centers between the RuO₂ and the graphene can break the classic scaling relationships between the free energies of HOO* and HO* to reduce the limiting potential, rendering an enhancement in the intrinsic OER activity and the resistance to over-oxidation and corrosion for RuO₂ .

Reactive nanotemplates for synthesis of highly efficient electrocatalysts: beyond simple morphology transfer

Efficient electrocatalysts for energy conversion in general, and fuel cell operation and water electrolysis in particular, are pivotal for carbon-free hydrogen production. While the requirements of successful electrocatalysts include a high number density of catalytically active sites, high surface-to-volume ratio, inherently high catalytic activity, and robustness of the catalyst surface structure under harsh operating conditions, it is extremely difficult to synthesize nanocatalysts that could possess all these structural characteristics. Nanotemplate-mediated synthesis, namely, the coating or filling of a template with a desired material phase followed by the removal of the template, has captured the interest of researchers because of the ease of creating hollow-structured nanocatalysts with a high surface to volume ratio. Recent studies, however, have revealed that nanotemplates could be more than just passive supports because they greatly affect catalytic performance by creating an unusual synergy between the substrate and catalyst and by providing dopants to the actual catalyst phase owing to their reactive nature. In this review, we discuss the most notable recent advances in the nanotemplate-based synthesis of electrocatalysts as well as the unusual effects of nanotemplates on the performance of nanocatalysts. We also provide an outlook for this fledgling field so that future research efforts could be focused on the development of practically useful electrocatalysts that could shape the future of energy technologies.

Zirconium-Regulation-Induced Bifunctionality in 3D Cobalt-Iron Oxide Nanosheets for Overall Water Splitting

The design of high-efficiency non-noble bifunctional electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is paramount for water splitting technologies and associated renewable energy systems. Spinel-structured oxides with rich redox properties can serve as alternative low-cost OER electrocatalysts but with poor HER performance. Here, zirconium regulation in 3D CoFe₂ O₄ (CoFeZr oxides) nanosheets on nickel foam, as a novel strategy inducing bifunctionality toward OER and HER for overall water splitting, is reported. It is found that the incorporation of Zr into CoFe₂ O₄ can tune the nanosheet morphology and electronic structure around the Co and Fe sites for optimizing adsorption energies, thus effectively enhancing the intrinsic activity of active sites. The as-synthesized 3D CoFeZr oxide nanosheet exhibits high OER activity with small overpotential, low Tafel slope, and good stability. Moreover, it shows unprecedented HER activity with a small overpotential of 104 mV at 10 mA cm^-2 in alkaline media, which is better than ever reported counterparts. When employing the CoFeZr oxides nanosheets as both anode and cathode catalysts for overall water splitting, a current density of 10 mA cm^-2 is achieved at the cell voltage of 1.63 V in 1.0 m KOH.