Structured Perovskite Light Absorbers for Efficient and Stable Photovoltaics

Synergistic Integration of Halide Perovskite and Rare-Earth Ions toward Photonics

Halide perovskites (HPs), emerging as a noteworthy class of semiconductors, hold great promise for an array of optoelectronic applications, including anti-counterfeiting, light-emitting diodes (LEDs), solar cells (SCs), and photodetectors, primarily due to their large absorption cross section, high fluorescence efficiency, tunable emission spectrum within the visible region, and high tolerance for lattice defects, as well as their adaptability for solution-based fabrication processes. Unlike luminescent HPs with band-edge emission, trivalent rare-earth (RE) ions typically emit low-energy light through intra-4f optical transitions, characterized by narrow emission spectra and long emission lifetimes. When fused, the cooperative interactions between HPs and REs endow the resulting binary composites not only with optoelectronic properties inherited from their parent materials but also introduce new attributes unattainable by either component alone. This review begins with the fundamental optoelectronic characteristics of HPs and REs, followed by a particular focus on the impact of REs on the electronic structures of HPs and the associated energy transfer processes. The advanced synthesis methods utilized to prepare HPs, RE-doped compounds, and their binary composites are overviewed. Furthermore, potential applications are summarized across diverse domains, including high-fidelity anticounterfeiting, bioimaging, LEDs, photovoltaics, photodetection, and photocatalysis, and conclude with remaining challenges and future research prospects.

Efficient wide-bandgap perovskite photovoltaics with homogeneous halogen-phase distribution

Wide-bandgap (WBG) perovskite solar cells (PSCs) are employed as top cells of tandem cells to break through the theoretical limits of single-junction photovoltaic devices. However, WBG PSCs exhibit severe open-circuit voltage (Voc) loss with increasing bromine content. Herein, inhomogeneous halogen-phase distribution is pointed out to be the reason, which hinders efficient extraction of carriers. We thus propose to form homogeneous halogen-phase distribution to address the issue. With the help of density functional theory, we construct a double-layer structure (D-2P) based on 2-(9H-Carbazol-9-yl)ethyl]phosphonic acid molecules to provide nucleation sites for perovskite crystallization. Homogeneous perovskite phase is achieved through bottom-up templated crystallization of halogen component. The efficient carrier extraction reduces the Shockley-Read-Hall recombination, resulting in a high Voc of 1.32 V. As a result, D-2P-treated device (1.75 eV) achieves a record power conversion efficiency of 20.80% (certified 20.70%), which is the highest value reported for WBG (more than 1.74 eV) PSCs.

Unravelling Structural, Optical, and Band Alignment Properties of Mixed Pb-Sn Metal-Halide Quasi-2D Ruddlesden-Popper Perovskites

Lead-tin (Pb-Sn) mixed-halide perovskites show potential for single-junction and tandem solar cells due to their adjustable band gaps, flexible composition, and superior environmental stability compared to three-dimensional (3D) perovskites. However, they have lower power conversion efficiencies. Understanding band alignment and charge carrier dynamics is essential for enhancing photovoltaic performance. In this view, herein we have prepared thin films of mixed Pb-Sn-based two dimensional (2D) Ruddlesden-Popper (RP) perovskites BA2FA(Pb1-xSnx)2I7 using a solution-based method. XRD study revealed the formation of orthorhombic phases for pristine (BA2FAPb2I7) and mixed Pb-Sn perovskite thin films. UV-vis analysis showed that different n = 2 and n = 3 phases are present in the pristine sample. In contrast, Pb-Sn-doped samples showed no signature of other phases with a prominent red-shift in the visible spectral region. Cyclic voltammetry showed peaks for electron transfers at the band edges. Additionally, electrochemical and optical band gap matching was observed, along with decreased peak intensity due to less reactant and altered electrolyte-perovskite interface stability. Density functional theory (DFT) calculations revealed that the reduced band gap is due to the alteration of electrostatic interactions and charge distribution within the lattice upon Sn substitution. Low-temperature PL analysis provided insights into charge carrier dynamics with Sn substitution and suggested the suppression of higher n phases and self-trapped excitons/carriers in mixed Pb-Sn quasi-2D RP perovskite thin films. This study sheds light on the electron transfer phenomena between TiO2 and SnO2 layers by estimating band offsets from valence band maximum (VBM) and conduction band minimum (CBM), which is crucial for future applications in fabricating stable and efficient 2D-Pb-Sn mixed perovskites for optoelectronic applications.

Numerical simulation to optimize power conversion efficiency of an FTO/GO/Cs2AgBiBr6/Cu2O solar cell

Efficient conversion of solar power to electrical power through the development of smart, reliable, and environmentally friendly materials is a key focus for the next-generation renewable energy sector. The involvement of degradable and toxic elements present in hybrid perovskites presents serious concerns regarding the commercial viability of these materials for the solar cell industry. In this study, a solar cell with a stable, nondegradable, and lead-free halide-based double perovskite Cs2AgBiBr6 as the absorber layer, Cu2O as a hole transport layer, and GO as the electron transport layer has been simulated using SCAPS 1D. The thickness of the absorber, electron transport, and hole transport layers are tuned to optimize the performance of the designed solar cell. Notably, perovskite solar cells functioned most efficiently with an electron affinity value of 4.0 eV for Cu2O. In addition, the effect of variation of series resistance and temperature on generation and recombination rates, current density, and quantum efficiency has been elaborated in detail. The findings of this study provide valuable insight and encouragement toward the realization of a non-toxic, inorganic perovskite solar device and will be a significant step forward in addressing environmental concerns associated with perovskite solar cell technology.

Ordered Perovskite Structure with Functional Units for High Performance and Stable Solar Cells

Ion migration is one of the most critical challenges that affects the stability of metal-halide perovskite solar cells (PSCs). However, the current arsenal of available strategies for solving this issue is limited. Here, novel perovskite active layers following the concept of ordered structures with functional units (OSFU) to intrinsically suppress ion migration, in which a three-dimensional (3D) perovskite layer is deposited by vapor deposition for light absorption and a 2D layer is deposited by solution process for ion inhibition, are constructed. As a promising result, the activation energy of ion migration increases from 0.36 eV for the conventional perovskite to 0.54 eV for the OSFU perovskite. These devices exhibit substantially enhanced operational stability in comparison with the conventional ones, retaining >85% of their initial efficiencies after 1200 h under ISOS-L-1. Moreover, the OSFU devices show negligible fatigue behavior with a robust performance under light/dark cycling aging test (ISOS-LC-1 protocol), which demonstrates the promising application of functional motif theory in this field.

Highly sensitive and selective fluorescent "turn-on" sensor for Ag+ detection using MAPbBr3@PCN-221(Fe): An efficient Ag+-bridged energy transfer from perovskite to MOF

Metal ion-induced water pollution is attracting increasing public attention. Perovskite quantum dots and metal-organic frameworks (MOFs), owing to their outstanding properties, hold promise as ideal probes for detecting metal ions. In this study, a composite material, MAPbBr3@PCN-221(Fe), was prepared by encapsulating MAPbBr3 quantum dots with PCN-221(Fe), demonstrating high chemical stability and good reusability. The composite material shows a sensitive fluorescence turn-on signal in the presence of silver ions. The fluorescence intensity of the composite material exhibits a linear relationship with the concentration of Ag+ in the solution, with a low detection limit of 8.68 µM. Moreover, the fluorescence signal exhibits a strong selectivity for Ag+, enabling the detection of Ag+ concentration. This fluorescence turn-on signal originates from the Ag+-bridged energy transfer from the conductive band of MAPbBr3 to the excited state of the MOF, which is directly proportional to the concentration of silver ions. Simultaneously, this finding may open up a new possibility in artificial controlled energy transfer from perovskite to MOF for future development.

Thermal stability and decomposition kinetics of mixed-cation halide perovskites

Organic-inorganic halide perovskites (OIHPs) have emerged as one of the most efficient photovoltaic materials due to their superior properties. However, improving their stability remains a key challenge. Herein, we investigate the thermal decomposition properties of OIHP FAxMA1-xPbI3 with mixed cations of formamidinium (FA) and methylammonium (MA). Using thermogravimetric analysis together with Fourier transform infrared spectroscopy, we identify and monitor the gaseous decomposition products as a function of temperature and cation composition. Thermal decomposition products of both MA and FA cations were observed at all stages of the thermal decomposition process, contrary to previous expectations. The yield, release sequence and kinetics of the organic gaseous products were found to depend strongly on the ratio between FA and MA cations. Furthermore, cesium ion doping was investigated as a potential strategy to improve the thermal stability of mixed cation perovskites. These results provide new insights into the effect of cation mixing on perovskite stability, suggesting that optimizing the cation ratios and decomposition pathways can guide approaches to boost the stability and performance of mixed cation perovskites.

Lattice Strain Regulation Enables High-Performance Formamidinium Perovskite Photovoltaics

Formamidinium lead iodide (FAPbI3 ) perovskite possesses an ideal optical bandgap and is a potential material for fabricating the most efficient single-junction perovskite solar cells (PSCs). Nevertheless, large formamidinium (FA) cations result in residual lattice strain, which reduces the power conversion efficiency (PCE) and operational stability of PSCs. Herein, the modulation of lattice strain in FAPbI3 crystals via a π-conjugated organic amine, i.e., 4-pyrene oxy butylamine (PYBA), is proposed. PYBA pairs at the grain boundary serve as a template for the crystallization of FAPbI3 perovskite, thereby inducing a highly oriented crystal and a pure α-phase film. The PYBA pairs with strong π-π interactions provide a solid fulcrum for external compression strain, thus compensating for the inherent tension strain of FAPbI3 crystals. The strain release elevates the valence band of the perovskite crystals, thereby decreasing the bandgap and trap density. Consequently, the PYBA-regulated FAPbI3 PSC achieves an excellent PCE of 24.76%. Moreover, the resulting device exhibits improves operational stability and maintains over 80% of its initial PCE after 1500 h under maximum power point tracking conditions.

Two-Dimensional Metal Halides for X-Ray Detection Applications

Metal halide perovskites have recently emerged as promising candidates for the next generation of X-ray detectors due to their excellent optoelectronic properties. Especially, two-dimensional (2D) perovskites afford many distinct properties, including remarkable structural diversity, high generation energy, and balanced large exciton binding energy. With the advantages of 2D materials and perovskites, it successfully reduces the decomposition and phase transition of perovskite and effectively suppresses ion migration. Meanwhile, the existence of a high hydrophobic spacer can block water molecules, thus making 2D perovskite obtain excellent stability. All of these advantages have attracted much attention in the field of X-ray detection. This review introduces the classification of 2D halide perovskites, summarizes the synthesis technology and performance characteristics of 2D perovskite X-ray direct detector, and briefly discusses the application of 2D perovskite in scintillators. Finally, this review also emphasizes the key challenges faced by 2D perovskite X-ray detectors in practical application and presents our views on its future development.

Color-stable blue light-emitting diodes with defect management by sulfonate

Utilizing bromine-based quasi-two-dimensional (quasi-2D) perovskite is a feasible strategy to achieve efficient and stable blue perovskite light-emitting diodes (PeLEDs). However, dimension discretization is prone to emerge due to the irregular phase distribution and massive defects in the perovskite system. Here, we introduce alkali-salt to modulate the phase distribution for reducing the n = 1 phase and propose a novel Lewis base to serve as a passivating agent to decrease defects. This revealed that the external quantum efficiency (EQE) dramatically improves due to the suppression of severe non-radiative recombination losses. Consequently, efficient blue PeLEDs were obtained with a peak EQE of 3.82% located at 487 nm.

Toward Efficient Two-Photon Circularly Polarized Light Detection through Cooperative Strategies in Chiral Quasi-2D Perovskites

Organic-inorganic hybrid perovskites carry unique semiconducting properties and advanced flexible crystal structures. These characteristics of organic-inorganic hybrid perovskites create a promising candidacy for circularly polarized light (CPL) detection. However, CPL detections based on chiral perovskites are limited to UV and visible wavelengths. The natural quantum well structures of layered hybrid perovskites generate strong light-matter interactions. This makes it possible to achieve near-infrared (NIR) CPL detection via two-photon absorption in the sub-wavelength region. In this study, cooperative strategies of dimension increase and mixed spacer cations are used to obtain a pair of chiral multilayered perovskites (R-β-MPA)EA₂ Pb₂ Br₇ and (S-β-MPA)EA₂ Pb₂ Br₇ (MPA = methylphenethylammonium and EA = ethylammonium). The distinctive bi-cations interlayer and multilayered inorganic skeletons provide enhanced photoconduction. Moreover, superior photoconduction leads to the prominent NIR CPL response with a responsivity up to 8.1 × 10^-5 A W^-1 . It is anticipated that this work can serve as a benchmark for the fabrication and optimization of efficient NIR CPL detection by simple chemical design.

Tuning Hole Transport Properties via Pyrrole Derivation for High-Performance Perovskite Solar Cells

Hole transport materials (HTMs) with high hole mobility, good band alignment and ease of fabrication are highly desirable for perovskite solar cells (PSCs). Here, we designed and synthesized novel organic HTMs, named T3, which can be synthesized in high yields with commercially available materials, featuring a substituted pyrrole core and triphenylamine peripheral arms. The capability of functionalization in the final synthetic step provides an efficient way to obtain a variety of T3-based HTMs with tunable energy levels and other properties. Among them, fluorine-substituted T3 (T3-F) exhibits the best band alignment and hole extraction properties, leading to PSCs with outstanding PCEs of 24.85 % and 24.03 % (certified 23.46 %) for aperture areas of 0.1 and 1 cm² , respectively. The simple structure and tunable performance of T3 can inspire further optimization for efficient PSCs.

Synergistic passivation and stepped-dimensional perovskite analogs enable high-efficiency near-infrared light-emitting diodes

Formamidinium lead iodide (FAPbI₃) perovskites are promising emitters for near-infrared light-emitting diodes. However, their performance is still limited by defect-assisted nonradiative recombination and band offset-induced carrier aggregation at the interface. Herein, we introduce a couple of cadmium salts with acetate or halide anion into the FAPbI₃ perovskite precursors to synergistically passivate the material defects and optimize the device band structure. Particularly, the perovskite analogs, containing zero-dimensional formamidinium cadmium iodide, one-dimensional δ-FAPbI₃, two-dimensional FA₂FA_n-1Pb_nI_3n+1, and three-dimensional α-FAPbI₃, can be obtained in one pot and play a pivotal and positive role in energy transfer in the formamidinium iodide-rich lead-based perovskite films. As a result, the near-infrared FAPbI₃-based devices deliver a maximum external quantum efficiency of 24.1% together with substantially improved operational stability. Combining our findings on defect passivation and energy transfer, we also achieve near-infrared light communication with device twins of light emitting and unprecedented self-driven detection.

Low amplified spontaneous emission threshold from 2-thiophenemethylammonium quasi-2D perovskites via phase engineering

Quasi-2D Ruddlesden-Popper perovskites attract great attention as an optical gain media in lasing applications due to their excellent optoelectronic properties. Herein, a novel quasi-2D Ruddlesden-Popper perovskite based on 2-thiophenemethylammonium (ThMA) is synthesized by a facile solution-processed method. In addition, an anti-solvent treatment method is proposed to tune the phase distribution, and preferential orientation of quasi-2D (ThMA)₂Csn_-1PbnBr_3n+1 thin films. The large-n-dominated narrow domain distribution improves the energy transfer efficiency from small-n to large-n phases. Also, the highly oriented nanocrystals facilitate the efficient Förster energy transfer, beneficial for the carrier population transfer. Furthermore, a green amplified spontaneous emission with a low threshold of 13.92 µJ/cm² is obtained and a single-mode vertical-cavity laser with an 0.4 nm linewidth emission is fabricated. These findings provide insights into the design of the domain distribution to realize low-threshold multicolor continuous-wave or electrically driven quasi-2D perovskites laser.

Origin and physical effects of edge states in two-dimensional Ruddlesden-Popper perovskites

The edge region of two-dimensional (2D) Ruddlesden-Popper (RP) perovskites exhibits anomalous properties from the bulk region, including low energy emission and superior capability of dissociating exciton, which is highly beneficial for the optoelectronic devices like solar cells and photodetectors, denoted as “edge states”. In this review, we introduce the recent progress on the edge states that have been focused on the origin and the optoelectronic properties of edge states in 2D RP perovskites. By providing theoretical frameworks and experimental observations, we elucidate the origin of the edge states from two aspects, intrinsic electronic properties and extrinsic structure distortions. Besides, we introduce the physical properties of the edge states and current debating on this topic. Finally, we present an outlook on future research about the edge states of 2D RP perovskites.

Enhanced p-Type Conductivity of NiOx Films with Divalent Cd Ion Doping for Efficient Inverted Perovskite Solar Cells

The effect of substitutional metal dopants in NiO_x on the structural and electronic structures is of great interest, particularly for increasing the p-type conductivities as a hole transport layer (HTL) applied in perovskite solar cells (PSCs). In this paper, experimental fabrications and density functional theory calculations have been carried out on Cd-doped NiO_x films to examine the effect of divalent doping on the electronic and geometric structures of NiO_x. The results indicate that divalent Cd dopants reduced the formation energy of the Ni vacancy (V_Ni) and created more V_Ni in the films, which enhanced the p-type conductivity of the NiO_x films. In addition, Cd doping also deepened the valence band edge, reduced the monomolecular Shockley-Read-Hall (SRH) recombination losses, and promoted hole extraction and transport. Hence, the PSCs with Cd:NiO_x HTLs manifest a high efficiency of 20.47%, a high photocurrent density of 23.00 mA cm^-2, and a high fill factor of 79.62%, as well as negligible hysteresis and excellent stability. This work illustrates that divalent elements such as Cd, Zn, Co, etc. may be potential dopants to improve the p-type conductivity of the NiO_x films for applications in highly efficient and stabilized PSCs.

Lewis Base Plays a Double-Edged-Sword Role in Trap State Engineering of Perovskite Polycrystals

We report the double-edged-sword effect of the thiourea (a typical Lewis base) additive for tailoring the trap state distribution of perovskite polycrystalline films. Through the thiourea treatment, the polycrystal grain size is greatly increased because of the reduced crystallization activation energy, which, together with the surface defect passivation, alters the density of the energetically "deep" and "shallow" trap states in a trade-off manner. Based on this finding and further photoelectric and spectral studies, the nonmonotonic dependence of the photoluminescence intensity on the thiourea concentration and the complicated time-resolved photoluminescence behavior are excellently clarified. As a proof of concept, the photophysical performance of perovskite polycrystals is optimized via a modified Lewis base treatment by taking the proposed double-edged-sword effect into account.

Water and oxygen co-induced microstructure relaxation and evolution in CH3NH3PbI3

Owing to perovskite possessing the outstanding optoelectronic properties, perovskite-based solar cells show prominent performance. The stability of perovskite-based solar cells hampers the progress of commercialization, so it is important to understand the microstructure mechanism of perovskite degradation under the humidity and oxygen environmental conditions. In this study, a meaningful Debye-type dielectric relaxation was observed under water vapor and oxygen co-treatment conditions. Interestingly, the relaxation was not observed under water vapor or oxygen treatment individually. This new dielectric relaxation is identified as a direct result of dipole jump, and its activation energy was measured to be 630 ± 6 meV. According to photoelectron spectroscopy and ¹³C nuclear magnetic resonance data, we suggest that the dipoles are formed by CH₃NH₃⁺ (MA⁺) and superoxide (O₂^-), which originate from the distorted crystal lattice and water vapor-weakened hydrogen bonds of Pb-I cages. In addition, the activation energy fitted by dielectric relaxation might be the energy of ion migration. This study contributes to understanding the mechanism of perovskite degradation from the view of microstructure relaxation and evolution, and also provides a method for the analysis of ion migration energy.

Oriented Halide Perovskite Nanostructures and Thin Films for Optoelectronics

Oriented semiconductor nanostructures and thin films exhibit many advantageous properties, such as directional exciton transport, efficient charge transfer and separation, and optical anisotropy, and hence these nanostructures are highly promising for use in optoelectronics and photonics. The controlled growth of these structures can facilitate device integration to improve optoelectronic performance and benefit in-depth fundamental studies of the physical properties of these materials. Halide perovskites have emerged as a new family of promising and cost-effective semiconductor materials for next-generation high-power conversion efficiency photovoltaics and for versatile high-performance optoelectronics, such as light-emitting diodes, lasers, photodetectors, and high-energy radiation imaging and detectors. In this Review, we summarize the advances in the fabrication of halide perovskite nanostructures and thin films with controlled dimensionality and crystallographic orientation, along with their applications and performance characteristics in optoelectronics. We examine the growth methods, mechanisms, and fabrication strategies for several technologically relevant structures, including nanowires, nanoplates, nanostructure arrays, single-crystal thin films, and highly oriented thin films. We highlight and discuss the advantageous photophysical properties and remarkable performance characteristics of oriented nanostructures and thin films for optoelectronics. Finally, we survey the remaining challenges and provide a perspective regarding the opportunities for further progress in this field.

A Review of Integrated Systems Based on Perovskite Solar Cells and Energy Storage Units: Fundamental, Progresses, Challenges, and Perspectives

With the remarkable progress of photovoltaic technology, next-generation perovskite solar cells (PSCs) have drawn significant attention from both industry and academic community due to sustainable energy production. The single-junction-cell power conversion efficiency (PCE) of PSCs to date has reached up to 25.2%, which is competitive to that of commercial silicon-based solar cells. Currently, solar cells are considered as the individual devices for energy conversion, while a series connection with an energy storage device would largely undermine the energy utilization efficiency and peak power output of the entire system. For substantially addressing such critical issue, advanced technology based on photovoltaic energy conversion-storage integration appears as a promising strategy to achieve the goal. However, there are still great challenges in integrating and engineering between energy harvesting and storage devices. In this review, the state-of-the-art of representative integrated energy conversion-storage systems is initially summarized. The key parameters including configuration design and integration strategies are subsequently analyzed. According to recent progress, the efforts toward addressing the current challenges and critical issues are highlighted, with expectation of achieving practical integrated energy conversion-storage systems in the future.

Fabricating efficient and stable quasi-3D and 3D/2D perovskite solar cells with 2D-sheets connected by inorganic type ionic-bond

In this work, we report a novel two-dimensional (2D) (SrBr)₂PbI₄perovskite layered architecture, which were formed by the reaction of strontium bromide (SrBr₂), strontium iodide (SrI₂) and lead iodide (PbI₂). Formation of 2D (SrBr)₂PbI₄was verified by small angle XRD peak at 6.4°, which corresponds to the layer distance of 13.78 Å. The best one of solar cells fabricated with Quasi-3D perovskite, (SrBr)₂FA₅₉Pb₆₀I₁₈₁(n= 60), showed a power conversion efficiency (PCE) of 18.46% and retained 95% of the initial PCE at 1000 h in the dry air. Further, the 2D (SrBr)₂PbI₄as the surface passivation layer on the 3D FAPbI₃perovskite greatly reduced the defects at the perovskite/Spiro-OMeTAD interface, and the corresponding solar cells with FAPbI₃/(SrBr)₂PbI₄3D/2D structure achieved a PCE of 22.14% and over 90% retention of the original PCE at 1000 h. In short, this work provides an example of inorganic complex cations that can form 2D perovskites and achieve perovskite solar cells with high PCE and stabilization at the same time.

High-performance quasi-2D perovskite light-emitting diodes: from materials to devices

Quasi-two-dimensional (quasi-2D) perovskites have attracted extraordinary attention due to their superior semiconducting properties and have emerged as one of the most promising materials for next-generation light-emitting diodes (LEDs). The outstanding optical properties originate from their structural characteristics. In particular, the inherent quantum-well structure endows them with a large exciton binding energy due to the strong dielectric- and quantum-confinement effects; the corresponding energy transfer among different n-value species thus results in high photoluminescence quantum yields (PLQYs), particularly at low excitation intensities. The review herein presents an overview of the inherent properties of quasi-2D perovskite materials, the corresponding energy transfer and spectral tunability methodologies for thin films, as well as their application in high-performance LEDs. We then summarize the challenges and potential research directions towards developing high-performance and stable quasi-2D PeLEDs. The review thus provides a systematic and timely summary for the community to deepen the understanding of quasi-2D perovskite materials and resulting LED devices.

Energy-Funneling Process in Quasi-2D Perovskite Light-Emitting Diodes

Quasi-two-dimensional (quasi-2D) perovskites, demonstrating excellent radiative efficiency and facile processability, have been considered as next-generation materials for light-emitting applications. Quasi-2D perovskites with a unique energy-funneling process offer an approach to achieve not only high photoluminescence quantum yields at low excitation but also tunable emission induced by dielectric and quantum confinement. In this Perspective, we highlight the mechanism of the energy-funneling process and discuss the salient position of it in quasi-2D perovskite materials for light-emitting applications; we then present the significance of component and molecular engineering strategies for the energy-funneling process to meet the requirements of stable emission and display technologies. Considering present achievements, we also provide promising directions for future advancements of quasi-2D perovskite materials. We hope this Perspective can provide a new viewpoint for researchers to encourage the commercial progress of quasi-2D perovskites for light-emitting applications.

Reducing the impact of Auger recombination in quasi-2D perovskite light-emitting diodes

Rapid Auger recombination represents an important challenge faced by quasi-2D perovskites, which induces resulting perovskite light-emitting diodes' (PeLEDs) efficiency roll-off. In principle, Auger recombination rate is proportional to materials' exciton binding energy (E_b). Thus, Auger recombination can be suppressed by reducing the corresponding materials' E_b. Here, a polar molecule, p-fluorophenethylammonium, is employed to generate quasi-2D perovskites with reduced E_b. Recombination kinetics reveal the Auger recombination rate does decrease to one-order-of magnitude lower compared to its PEA⁺ analogues. After effective passivation, nonradiative recombination is greatly suppressed, which enables resulting films to exhibit outstanding photoluminescence quantum yields in a broad range of excitation density. We herein demonstrate the very efficient PeLEDs with a peak external quantum efficiency of 20.36%. More importantly, devices exhibit a record luminance of 82,480 cd m^-2 due to the suppressed efficiency roll-off, which represent one of the brightest visible PeLEDs yet.

Methylphosphonium Tin Bromide: A 3D Perovskite Molecular Ferroelectric Semiconductor

3D ABX₃ organic-inorganic halide perovskite (OIHP) semiconductors like [CH₃ NH₃ ]PbI₃ have received great attention because of their various properties for wide applications. However, although a number of low-dimensional lead-based OIHP ferroelectric semiconductors have been documented, obtaining 3D ABX₃ OIHP ferroelectric semiconductors is challenging. Herein, an A-site cation [CH₃ PH₃ ]⁺ (methylphosphonium, MP) is employed to successfully obtain a lead-free 3D ABX₃ OIHP ferroelectric semiconductor MPSnBr₃ , which shows clear above-room-temperature ferroelectricity and a direct bandgap of 2.62 eV. It is emphasized that MPSnBr₃ is a multiaxial molecular ferroelectric with the number of ferroelectric polar axes being as many as 12, which is far more than those of the other OIHP ferroelectric semiconductors and even the classical inorganic perovskite ferroelectric semiconductors BiFeO₃ (4 polar axes) and BaTiO₃ (3 polar axes). MPSnBr₃ is the first MP-based 3D ABX₃ OIHP ferroelectric semiconductor. This finding throws light on the exploration of other excellent 3D ABX₃ OIHP ferroelectric semiconductors with great application prospects.