Bubble Forming Films for Spatial Selective Cell Killing

Laser-induced vapor nanobubbles for B16-F10 melanoma cell killing and intracellular delivery of chemotherapeutics

The most lethal form of skin cancer is cutaneous melanoma, a tumor that develops in the melanocytes, which are found in the epidermis. The treatment strategy of melanoma is dependent on the stage of the disease and often requires combined local and systemic treatment. Over the years, systemic treatment of melanoma has been revolutionized and shifted toward immunotherapeutic approaches. Phototherapies like photothermal therapy (PTT) have gained considerable attention in the field, mainly because of their straightforward applicability in melanoma skin cancer, combined with the fact that these strategies are able to induce immunogenic cell death (ICD), linked with a specific antitumor immune response. However, PTT comes with the risk of uncontrolled heating of the surrounding healthy tissue due to heat dissipation. Here, we used pulsed laser irradiation of endogenous melanin-containing melanosomes to induce cell killing of B16-F10 murine melanoma cells in a non-thermal manner. Pulsed laser irradiation of the B16-F10 cells resulted in the formation of water vapor nanobubbles (VNBs) around endogenous melanin-containing melanosomes, causing mechanical cell damage. We demonstrated that laser-induced VNBs are able to kill B16-F10 cells with high spatial resolution. When looking more deeply into the cell death mechanism, we found that a large part of the B16-F10 cells succumbed rapidly after pulsed laser irradiation, reaching maximum cell death already after 4 h. Practically all necrotic cells demonstrated exposure of phosphatidylserine on the plasma membrane and caspase-3/7 activity, indicative of regulated cell death. Furthermore, calreticulin, adenosine triphosphate (ATP) and high-mobility group box 1 (HMGB1), three key damage-associated molecular patterns (DAMPs) in ICD, were found to be exposed from B16-F10 cells upon pulsed laser irradiation to an extent that exceeded or was comparable to the bona fide ICD-inducer, doxorubicin. Finally, we could demonstrate that VNB formation from melanosomes induced plasma membrane permeabilization. This allowed for enhanced intracellular delivery of bleomycin, an ICD-inducing chemotherapeutic, which further boosted cell death with the potential to improve the systemic antitumor immune response.

Adipocytolytic Polymer Nanoparticles for Localized Fat Reduction

The demand for body fat reduction is increasing. However, conventional lipolytic approaches fail to control adipose tissue reduction and cause severe side effects in adjacent nonadipose tissues. A strategy to specifically reduce subcutaneous fat using adipocytolytic polymer nanoparticles in a minimally invasive manner is reported here. The polymer nanoparticles are designed to generate carbon dioxide gas when selectively absorbed by adipocytes. The carbon dioxide gas generated within late endosomes/lysosomes induces adipocytolysis, thereby reducing the number of cells. Localized injection of the adipocytolytic nanoparticles substantially reduces subcutaneous fat in a high-fat diet-induced obese mouse model, without significant changes in hematological or serum biochemical parameters. The adipocytolytic efficacy of the nanoparticles is also evaluated in a porcine model. This strategy addresses the need to develop safe and effective adipocytolytic agents using functional polymer nanoparticles.

Soft electrochemical bubble actuator with liquid metal electrode using an embodied hydrogel pneumatic source

Soft pneumatic actuators-such as those used for soft robotics-achieve actuation by inflation of pneumatic chambers. Here, we report the use of the electrochemical reduction of water to generate gaseous products that inflate pneumatic chambers. Whereas conventional pneumatic actuators typically utilize bulky mechanical pumps, the approach here utilizes only electricity. In contrast to dielectric actuators, which require ∼kV to actuate, the electrochemical approach uses a potential of a few volts. The applied potential converts liquid water-a safe, abundant, and cheap fuel-into hydrogen gas. Since the chambers are constructed of hydrogel, the body of the actuator provides an abundant supply of water that ultimately converts to gas. The use of liquid metal for the electrode makes the entire device soft and ensures intimate contact between the chamber walls and the electrode during inflation. The device can inflate in tens of seconds, which is slower than other pneumatic approaches, but much faster than actuating hydrogels via principles of swelling. The actuation volume can be predicted and controlled based on the input parameters such as time and voltage. The actuation shape and position can also be controlled by the position of the electrodes and the geometry of the device. Such actuators have the potential to make tether-less (pump-free), electrically-controlled soft devices that can even operate underwater.

Chiral Luminescent Sensor Eu-BTB@d-Carnitine Applied in the Highly Effective Ratiometric Sensing of Curing Drugs and Biomarkers for Diabetes and Hypertension

Chiral drugs are of great significance in drug development and life science because one pair of enantiomers has a different combination mode with target biological active sites, leading to a vast difference in physical activity. Metal-organic framework (MOF)-based chiral hybrid materials with specific chiral sites have excellent applications in the highly effective sensing of drug enantiomers. Sitagliptin and clonidine are effective curing drugs for controlling diabetes and hypertension, while insulin and norepinephrine are the biomarkers of these two diseases. Excessive use of sitagliptin and clonidine can cause side effects such as stomach pain, nausea, and headaches. Herein, through post-synthetic strategy, MOF-based chiral hybrid material Eu-BTB@d-carnitine (H₃BTB = 1,3,5-benzenetrisbenzoic acid) was synthesized. Eu-BTB@d-carnitine has dual emission peaks at 417 and 616 nm when excited at 330 nm. Eu-BTB@d-carnitine can be applied in luminescent recognition toward sitagliptin and clonidine with high sensitivity and low detection limit (for sitagliptin detection, K_sv is 7.43 × 10⁶ [M^-1]; for clonidine detection, K_sv is 9.09 × 10⁶ [M^-1]; limit of detection (LOD) for sitagliptin is 10.21 nM, and LOD of clonidine is 8.34 nM). In addition, Eu-BTB@d-carnitine can further realize highly sensitive detection of insulin in human fluids with a high K_sv (2.08 × 10⁶ [M^-1]) and a low LOD (15.48 nM). On the other hand, norepinephrine also can be successfully discriminated by the hybrid luminescent platform of Eu-BTB@d-carnitine and clonidine with a high K_sv value of 4.79 × 10⁶ [M^-1] and a low LOD of 8.37 nM. As a result, the chiral hybrid material Eu-BTB@d-carnitine can be successfully applied in the highly effective ratiometric sensing of curing drugs and biomarkers for diabetes and hypertension.

Laser-induced nanobubbles safely ablate vitreous opacities in vivo

In myopia, diabetes and ageing, fibrous vitreous liquefaction and degeneration is associated with the formation of opacities inside the vitreous body that cast shadows on the retina, appearing as 'floaters' to the patient. Vitreous opacities degrade contrast sensitivity function and can cause notable impairment in vision-related quality of life. Here we introduce 'nanobubble ablation' for safe destruction of vitreous opacities. Following intravitreal injection, hyaluronic acid-coated gold nanoparticles and indocyanine green, which is widely used as a dye in vitreoretinal surgery, spontaneously accumulate on collagenous vitreous opacities in the eyes of rabbits. Applying nanosecond laser pulses generates vapour nanobubbles that mechanically destroy the opacities in rabbit eyes and in patient specimens. Nanobubble ablation might offer a safe and efficient treatment to millions of patients suffering from debilitating vitreous opacities and paves the way for a highly safe use of pulsed lasers in the posterior segment of the eye.

A Photothermal Nanoplatform with Sugar-Triggered Cleaning Ability for High-Efficiency Intracellular Delivery

Intracellular delivery of functional molecules is of great importance in various biomedical and biotechnology applications. Recently, nanoparticle-based photothermal poration has attracted increasing attention because it provided a facile and efficient method to permeabilize cells transiently, facilitating the entry of exogenous molecules into cells. However, this method still has some safety concerns associated with the nanoparticles that bind to the cell membranes or enter the cells. Herein, a nanoplatform with both photothermal property and sugar-triggered cleaning ability for intracellular delivery is developed based on phenylboronic acid (PBA) functionalized porous magnetic nanoparticles (named as M-PBA). The M-PBA particles could bind to the target cells effectively through the specific interactions between PBA groups and the cis-diol containing components on the cell membrane. During a short-term near-infrared irradiation, the bound particles convert absorbed light energy to heat, enabling high-efficiency delivery of various exogenous molecules into the target cells via a photothermal poration mechanism. After delivery, the bound particles could be easily "cleaned" from the cell surface via mild sugar-treatment and collected by a magnet, avoiding the possible side effects caused by the entrance of particles or their fragments. The delivery and cleaning process is short and effective without compromising the viability and proliferation ability of the cells with delivered molecules, suggesting that the M-PBA particles could be used as promising intracellular delivery agents with a unique combination of efficiency, safety, and flexibility.

A novel 2D metal–organic framework probe: a highly sensitive and visual fluorescent sensor for Al3+, Cr3+ and Fe3+ ions

A novel 2D MOF Tb-DBA was constructed. Tb-DBA could detect Al3+, Cr3+ and Fe3+ ions rapidly, sensitively, selectively, reversibly and visually. Tb-DBA represents a promising material for the quick detection of metal ions in aqueous solution.

NIR-triggered drug delivery system for chemo-photothermal therapy of posterior capsule opacification

Posterior capsule opacification (PCO) is the most common complication after cataract surgery and is likely to cause the second loss of vision. Pharmacological PCO prophylaxis has been proved to be effective, yet no clinical option is available due to the lack of a suitable mode of administration. In this work, we propose a unique concept of NIR dual-triggered drug release from black phosphorus (BP)-based implantable intraocular lens (IOL) for controlled drug release and chemo-photothermal combination therapy of PCO. Here, IOL is used as a "reservoir" of doxorubicin-loaded black phosphorus (BP-DOX), and BP is used as NIR activation agent for controlled drug release and photothermal therapy. This BP-DOX integrated IOL, namely BP-DOX@IOL, shows the characteristics of good transmittance, good mechanical property, NIR dual-triggered drug release behaviors, and excellent photothermal efficacy. In vivo studies reveal that there is no PCO occurrence in rabbits' model by using BP-DOX@IOL combined NIR irradiation, which exhibits distinct superiority on inhibiting PCO than the control group (100% PCO occurrence) 28 days post-surgery. This novel IOL drug delivery system would be a promising strategy for the future clinical application for PCO prophylaxis and treatment.