Halide Perovskite Crystallization Processes and Methods in Nanocrystals, Single Crystals, and Thin Films

Vacuum-Processed Propylene Urea Additive: A Novel Approach for Controlling the Growth of CH3NH3PbI3 Crystals in All Vacuum-Processed Perovskite Solar Cells

In this study, we present a novel method for controlling the growth of perovskite crystals in the vacuum thermal evaporation process by utilizing a vacuum-processable additive, propylene urea (PU). By coevaporation of perovskite precursors with PU to form the perovskite layer, PU, acting as a Lewis base additive, retards the direct reaction between the perovskite precursors. This facilitates a larger domain size and reduced defect density. Following the removal of the residual additive, the perovskite layer, exhibiting improved crystallinity, demonstrates reduced charge recombination, as confirmed by a time-resolved microwave conductivity analysis. Consequently, there is a notable enhancement in open-circuit voltage and power conversion efficiency, increasing from 1.05 to 1.15 V and from 17.17 to 18.31%, respectively. The incorporation of a vacuum-processable and removable Lewis base additive into the fabrication of vacuum-processed perovskite solar cells offers new avenues for optimizing these devices.

Universal growth of perovskite thin monocrystals from high solute flux for sensitive self-driven X-ray detection

Metal-halide perovskite thin monocrystals featuring efficient carrier collection and transport capabilities are well suited for radiation detectors, yet their growth in a generic, well-controlled manner remains challenging. Here, we reveal that mass transfer is one major limiting factor during solution growth of perovskite thin monocrystals. A general approach is developed to overcome synthetic limitation by using a high solute flux system, in which mass diffusion coefficient is improved from 1.7×10-10 to 5.4×10-10 m2 s-1 by suppressing monomer aggregation. The generality of this approach is validated by the synthesis of 29 types of perovskite thin monocrystals at 40-90 °C with the growth velocity up to 27.2 μm min-1. The as-grown perovskite monocrystals deliver a high X-ray sensitivity of 1.74×105 µC Gy-1 cm-2 without applied bias. The findings regarding limited mass transfer and high-flux crystallization are crucial towards advancing the preparation and application of perovskite thin monocrystals.

Perovskite Nanocrystals: Superior Luminogens for Food Quality Detection Analysis

With the global limited food resources receiving grievous damage from frequent climate changes and ascending global food demand resulting from increasing population growth, perovskite nanocrystals with distinctive photoelectric properties have emerged as attractive and prospective luminogens for the exploitation of rapid, easy operation, low cost, highly accurate, excellently sensitive, and good selective biosensors to detect foodborne hazards in food practices. Perovskite nanocrystals have demonstrated supreme advantages in luminescent biosensing for food products due to their high photoluminescence (PL) quantum yield, narrow full width at half-maximum PL, tunable PL in the entire visible spectrum, easy preparation, and various modification strategies compared with conventional semiconductors. Herein, we have carried out a comprehensive discussion concerning perovskite nanocrystals as luminogens in the application of high-performance biosensing of foodborne hazards for food products, including a brief introduction of perovskite nanocrystals, perovskite nanocrystal-based biosensors, and their application in different categories of food products. Finally, the challenges and opportunities faced by perovskite nanocrystals as superior luminogens were proposed to promote their practicality in the future food supply.

Colloidal CsBr Nanocrystals Triggered Inorganic Cation and Anion Exchange Enables High-Performance Perovskite Solar Cells

Achieving longitudinal doping of specific ions by surface treatment remains a challenge for perovskite solar cells, which are often limited by dopant and solvent compatibility. Here, with the flowing environment created by CsBr colloidal nanocrystals, ion exchange is induced on the surface of the perovskite film to enable the homogeneous distribution of Cs+ and gradient distribution of Br- simultaneously at whole depth of the film. Meanwhile, assisted by long-chain organic ligands, the excess PbI2 on the surface of perovskite film is converted to a more stable quasi-2D perovskite, which realizes effective passivation of defects on the surface. As a result, the unfavorable n-type doping on the top surface is suppressed, so that the energy level alignment between perovskite and hole transport layer is optimized. On the basis of co-modification of the surface and the bulk, the PCE of champion device reaches 23.22% with enhanced VOC of 1.12 V. Device maintains 97.12% of the initial PCE in dark ambient air at 1% RH after 1056 h without encapsulation, and 91.56% of the initial PCE under light illumination of 1 sun in N2 atmosphere for more than 200 h. The approach demonstrated here provides an effective strategy for the nondestructive introduction of inorganic ions in perovskite film.

Fixed-bed adsorption studies of endocrine-disrupting compounds from water by using novel calcium-based metal-organic frameworks

The presence of emerging water pollutants such as endocrine-disrupting compounds (EDCs), including 17-ethynylestradiol (EE2), bisphenol A (BPA), and perfluorooctanoic acid (PFOA), in contaminated water sources poses significant environmental and health challenges. This study aims to address this issue by investigating the efficiency of novel calcium-based metal-organic frameworks, known as mixed-linker calcium-based metal-organic frameworks (Ca-MIX), in adsorbing these endocrine-disrupting compounds. This study analyzed the influence of influent concentration, bed height, and flow rate on pollutant removal, with bed height emerging as a crucial factor. From the breakthrough curves, it was determined that the column maximum adsorption capacities followed the order of 17-ethynylestradiol (101.52 μg/g; 40%) > bisphenol A (99.07 μg/g; 39%) > perfluorooctanoic acid (81.28 μg/g; 32%). Three models were used to predict the adsorption process, with the Yan model outperforming the other models. This suggests the potential of mixed-linker calcium-based metal-organic frameworks for removing endocrine-disrupting compounds from water, using the Yan model as an effective predictor. Overall, this study provides valuable insights for the development of effective water treatment methods using mixed-linker calcium-based metal-organic frameworks to remove endocrine-disrupting compounds from contaminated water sources.

Diffusion-Controlled Crystal Engineering with Diverse Antisolvent Intervention for the Preparation of High-Quality Hybrid Perovskite Films

Antisolvent engineering is routinely used to modulate the crystallization of perovskite films as they can offer an additional driving force for nucleation. Actually, the intervention of antisolvent into nucleation is thought to involve some relatively fast and complex processes, which, however, are not fully understood so far. Here, the diffusion of the organic amine cation FA+ (one dominated precursor) and its distribution in a spin-coating process in different antisolvents is simulated by the computational fluid dynamics (CFD) model. It is suggested that a moderate diffusion rate (like that in the case of toluene as an antisolvent) not only enables to form a very uniform distribution of FA+ ions on the substrate, beneficial to the uniform nucleation of the intermediate phase, but also can balance the nucleation and growth rates of the intermediate phase, thereby suppressing undesired heterogeneous nucleation and growth. Results show that the perovskite film fabricated using toluene as an antisolvent has a high quality, based on which higher power conversion efficiencies of up to 24.32% are achieved for perovskite solar cells.

Self-Assembled Amino Acid Microstructures as Biocompatible Physically Unclonable Functions (BPUFs) for Authentication of Therapeutically Relevant Hydrogels

Counterfeited biomedical products result in significant economic losses and pose a public health hazard for over a million people yearly. Hydrogels, a class of biomedical products, are being investigated as alternatives to conventional biomedical products and are equally susceptible to counterfeiting. Here, a biocompatible, physically unclonable function (BPUF) to verify the authenticity of therapeutically relevant hydrogels are developed. The principle of BPUF relies on the self-assembly of tyrosine into fibril-like structures which are incorporated into therapeutically relevant hydrogels resulting in their random dispersion. This unclonable arrangement leads to distinctive optical micrographs captured using an optical microscope. These optical micrographs are transformed into a unique security code through cryptographic techniques which are then used to authenticate the hydrogel. The temporal stability of the BPUFs are demonstrated and additionally, exploit the dissolution propensity of the structures upon exposure to an adulterant to identify the tampering of the hydrogel. Finally, a platform to demonstrate the translational potential of this technology in validating and detecting tampering of therapeutically relevant hydrogels is developed. The potential of BPUFs to combat hydrogel counterfeiting is exemplified by its simplicity in production, ease of use, biocompatibility, and cost-effectiveness.

High stability and strong luminescence CsPbBr3-Cs4PbBr6 thin films for all-inorganic perovskite light-emitting diodes

All-inorganic lead halide perovskite, characterized by its exceptional optical and electrical properties, is burgeoning as a potential optoelectronic material. However, the standalone CsPbBr3 component encounters several challenges including small exciton binding energy (≈40 meV) and long charge diffusion length, giving rise to low photo-luminescence quantum-yield (PLQY); ion migration leads to instability in device operation, hindering device operation and potential development. To circumvent these limitations, our research endeavors to construct a novel core-shell structure that transforms the continuous [PbX6]4- octahedron into an isolated octahedral structure. We introduce the Cs4PbBr6 phase with 0D structure to passivate the vacancy defects in CsPbBr3, thereby suppressing ion migration and enhancing the luminescence intensity and stability. Our methodology involves fabricating dense CsPbBr3-Cs4PbBr6 composite films using a co-evaporation method, wherein the molar ratio of CsBr and PbBr2 is precisely adjusted. The films are subsequently rapidly annealed under ambient air conditions, and the effects of different annealing temperatures and annealing times on the CsPbBr3-Cs4PbBr6 films were investigated. Our results demonstrate significantly improved stability of the annealed films, with a mere 15% decrease in PL intensity after 100 days of storage under ambient air conditions at 48% relative humidity (RH). Based on this thin film, we fabricated all-inorganic structure Ag/N-Si/CsPbBr3-Cs4PbBr6/NiO/ITO light emitting diodes (LEDs), the devices have a low turn-on voltage VT ∼3 V and under unencapsulated, ambient air conditions, it can operate continuously for 12 hours under DC drive with only 10% attenuation. The results we obtained open up the possibility of designing and developing air-stable perovskite LEDs.

Highly Stable and Efficient Light-Emitting Diodes Based on Orthorhombic γ-CsPbI3 Nanocrystals

Orthorhombic γ-CsPbI₃ possesses the highest structural stability among the optically active (light-emissive) CsPbI₃ perovskites. Here, we make use of a seed-assisted heteroepitaxial growth to fabricate seed/core/shell CaI_x/γ-CsPbI₃/CaI₂ nanocrystals. Ultrasmall CaI_x nanoparticles serve as seeds to template the Pb-centered octahedral arrangement which enables the formation of the γ-CsPbI₃ phase and at the same time inhibit lattice strain by blocking the force transfer that otherwise leads to an octahedral twist and so improve the structural stability of the resulting nanocrystals. An outer shell composed from the same material, CaI₂, isolates the formed γ-CsPbI₃ nanocrystals from the environment, which also significantly improves their stability under ambient conditions. Optical and electrical studies indicate that the seed/core/shell CaI_x/γ-CsPbI₃/CaI₂ structure possesses a shallower set of trap states as compared to cubic α-CsPbI₃ nanocrystals. Light-emitting diodes utilizing these γ-CsPbI₃ nanocrystals show a record high external quantum efficiency of 25.3%, high brightness of over 13600 cd/m², and an operational lifetime of ∼14 h before reaching 50% of their initial luminance. These devices can repeatedly be illuminated over 650 times at ∼500 cd/m² with no decline of brightness, which indicates their great commercial potential.

Perovskite single-crystal thin films: preparation, surface engineering, and application

Perovskite single-crystal thin films (SCTFs) have emerged as a significant research hotspot in the field of optoelectronic devices owing to their low defect state density, long carrier diffusion length, and high environmental stability. However, the large-area and high-throughput preparation of perovskite SCTFs is limited by significant challenges in terms of reducing surface defects and manufacturing high-performance devices. This review focuses on the advances in the development of perovskite SCTFs with a large area, controlled thickness, and high quality. First, we provide an in-depth analysis of the mechanism and key factors that affect the nucleation and crystallization process and then classify the methods of preparing perovskite SCTFs. Second, the research progress on surface engineering for perovskite SCTFs is introduced. Third, we summarize the applications of perovskite SCTFs in photovoltaics, photodetectors, light-emitting devices, artificial synapse and field-effect transistor. Finally, the development opportunities and challenges in commercializing perovskite SCTFs are discussed.

Facet Engineering: A Promising Pathway toward Highly Efficient and Stable Perovskite Photovoltaics

Perovskite solar cells are considered to be important candidates for future energy applications. The facet orientation causes anisotropy in the photoelectric and chemical properties of the surface of perovskite films and therefore might affect the photovoltaic properties and stability of the devices. Facet engineering has attracted increasing attention only recently in the perovskite solar cell community, and related deep investigation is rather rare. To date, it is still difficult to precisely regulate and directly observe perovskite films with specific crystal facets due to the limitations of solution methods and characterization technology. Consequently, the link between facet orientation and photovoltaic performance of perovskite solar cells is still controversial. Herein, we highlight the latest progress in the means of direct characterization and regulation of crystal facets and briefly analyze the existing issues and future perspectives of facet engineering in perovskite photovoltaics.

Growth of Hybrid Perovskite Crystals from CH3NH3PbI3-xClx Solutions Subjected to Constant Solvent Evaporation Rates

In this work, we subjected hybrid lead-mixed halide perovskite (CH₃NH₃PbI_3-xCl_x) precursor inks to different solvent evaporation rates in order to facilitate the nucleation and growth of perovskite crystals. By controlling the temperature of perovskite solutions placed within open-air rings in precise volumes, we established control over the rate of solvent evaporation and, thus, over both the growth rate and the shape of perovskite crystals. Direct utilization of diluted lead-mixed halide perovskites solutions allowed us to control the nucleation and to favor the growth of only a low number of perovskite crystals. Such crystals exhibited a clear sixfold symmetry. While crystals formed at a lower range of temperatures (40-60 °C) exhibited a more compact dendritic shape, the crystals grown at a higher temperature range (80-110 °C) displayed a fractal dendritic morphology.

Bulk Perovskite Crystal Properties Determined by Heterogeneous Nucleation and Growth

In metal halide perovskites, charge transport in the bulk of the films is influenced by trapping and release and nonradiative recombination at ionic and crystal defects. Thus, mitigating the formation of defects during the synthesis process of perovskites from precursors is required for better device performance. An in-depth understanding of the nucleation and growth mechanisms of perovskite layers is crucial for the successful solution processing of organic-inorganic perovskite thin films for optoelectronic applications. In particular, heterogeneous nucleation, which occurs at the interface, must be understood in detail, as it has an effect on the bulk properties of perovskites. This review presents a detailed discussion on the controlled nucleation and growth kinetics of interfacial perovskite crystal growth. Heterogeneous nucleation kinetics can be controlled by modifying the perovskite solution and the interfacial properties of perovskites adjacent to the underlaying layer and to the air interface. As factors influencing the nucleation kinetics, the effects of surface energy, interfacial engineering, polymer additives, solution concentration, antisolvents, and temperature are discussed. The importance of the nucleation and crystal growth of single-crystal, nanocrystal, and quasi-two-dimensional perovskites is also discussed with respect to the crystallographic orientation.

Ligands in Lead Halide Perovskite Nanocrystals: From Synthesis to Optoelectronic Applications

Ligands are indispensable for perovskite nanocrystals (NCs) throughout the whole lifetime, as they not only play key roles in the controllable synthesis of NCs with different sizes and shapes, but also act as capping shell that affects optical properties and electrical coupling of NCs. Establishing a systematic understanding of the relationship between ligands and perovskite NCs is significant to enable many potential applications of NCs. This review mainly focuses on the influence of ligands on perovskite NCs. First of all, the ligands-dominated size and shape control of NCs is discussed. Whereafter, the surface defects of NCs and the bonding between ligands and perovskite NCs are classified, and corresponding post-treatment of surface defects via ligands is also summarized. Furthermore, advances in engineering the ligands towards the high performance of optoelectronic devices based on perovskite NCs, including photodetector, solar cell, light emitting diode (LED), and laser, and finally to potential challenges are also discussed.

Strain-Driven Solid-Solid Crystal Conversion in Chiral Hybrid Pseudo-Perovskites with Paramagnetic-to-Ferromagnetic Transition

Hybrid organic-inorganic perovskites (HOIPs) are promising stimuli-responsive materials (SPMs) owing to their molecular softness and tailorable structural dimensionality. The design of mechanically responsive HOIPs requires an in-depth understanding of how lattice strain induces intermolecular rearrangement that impacts physical properties. While chirality transfer from an organic cation to an inorganic lattice is known to influence chiral-optical properties, its effect on strain-induced phase conversion has not been explored. As opposed to achiral or racemic organic cations, chiral organic cations can potentially afford a new dimension in strain-responsive structural change. Herein, we demonstrate that mechanical strain induces a solid phase crystal conversion in chiral halide pseudo-perovskite single crystals (R/S)-(FE)₂CuCl₄ (FE = (4-Fluorophenyl)ethylamine) from a 0D isolated CuCl₄ tetrahedral to 1D corner-sharing CuFCl₅ octahedral framework via the incorporation of Cu···F interaction and N-H···F hydrogen bonding. This strain-induced crystal-to-crystal conversion involves the connection of neighboring 0D CuCl₄ tetrahedra via Cu²⁺-Cl^--Cu²⁺ linkages as well as the incorporation of a F-terminated organic cation as one of the X atoms in BX₆ octahedra, leading to a reduced band gap and paramagnetic-to-ferromagnetic conversion. Control experiments using nonchiral or racemic perovskite analogs show the absence of such solid phase conversion. To demonstrate pressure-sensitive properties, the 0D phase is dispersed in water-soluble poly(vinyl alcohol) (PVA) polymer, which can be applied to a large-scale pressure-induced array display on fibrous Spandex substrates via a screen-printing method.

Self-Assembly of 2D Hybrid Double Perovskites on 3D Cs2 AgBiBr6 Crystals towards Ultrasensitive Detection of Weak Polarized Light

We report the self-assembly of 2D double perovskite (BLA)₂ CsAgBiBr₇ (BLA=benzylammonium) on 3D Cs₂ AgBiBr₆ crystals, providing the first demonstration of polarization-sensitive photodetection using lead-free double perovskite heterocrystals (HCs). The (BLA)₂ CsAgBiBr₇ /Cs₂ AgBiBr₆ HC successfully combines the anisotropy of 2D double perovskites with the well-defined interface provided by heterogeneous integration. Driven by the built-in electric field in junction, photodetectors of HCs exhibit unique polarization dependence of zero-bias photocurrent with a large anisotropy ratio up to 9, which is 6 times amplified as compared to the pristine 2D (BLA)₂ CsAgBiBr₇ . More importantly, the present devices can remain polarization-sensitive with incident light intensity down to the nW cm^-2 level. Our study on lead-free hybrid perovskite HCs marks a step toward establishing robust material foundations for fundamental scientific investigations and the development of optoelectronic devices.

Controlling Phase Transition toward Future Low-Cost and Eco-friendly Printing of Perovskite Solar Cells

Perovskite solar cells (PSCs) have grown increasingly popular over the past few years and are considered to be game-changers in the energy conversion market. It has became vital to transfer the deep understanding of the perovskite film formation process during lab-scale fabrication to large-scale production. Complex phase transition during film formation has been revealed by in situ strategies. However, there is still debate which phase transition is the right route for a future scalable approach. Herein, we briefly summarize perovskite crystallization during scalable printing processes. The critical information about the intermediates involved in phase transition from precursors to perovskite crystals are discussed because it deeply impacts the morphology of printed films. Finally, important strategies to control phase transition and challenges toward future low-temperature and eco-friendly printing of perovskite solar cells are proposed. The information provided by this Perspective will assist the screening and development of the perovskite phase transition for future cost-efficient printed perovskite panels.

Lead-free all-inorganic halide double perovskite materials for optoelectronic applications: progress, performance and design

The geometrical and electronic structures of all-inorganic halide double perovskites and their applications in optoelectronic devices are reviewed. Novel design methods are desirable to develop this type of perovskite with superior performance.