Bifacial Dye Membranes: Ultrathin and Free-Standing although not Being Covalently Bound

Tuning Optical Properties of Organic Thin Films through Intermolecular Interactions - Fundamentals, Advances and Strategies

In applications ranging from photon-energy conversion into electrical or chemical forms (such as photovoltaics or photocatalysis) to numerous sensor technologies based on organic solids, the role of supramolecular structures and chromophore interactions is crucial. This review comprehensively examines the critical intermolecular interactions between organic dyes and their impact on optical properties. We explore the range of changes in absorption or emission properties observed in molecular aggregates compared to single molecules. Each effect is dissected to reveal its physicochemical foundations, relevance to different application domains, and documented examples from the literature that illustrate the potential modulation of absorption or emission properties by molecular and supramolecular structural adjustments. This work aims to serve as a concise guide for exploiting supramolecular phenomena in the innovation of novel optical and optoelectronic organic materials, with emphasis on strategic application and exploitation.

Catching the π-Stacks: Prediction of Aggregate Structures of Porphyrin

π-π interactions decisively shape the supramolecular structure and functionality of π-conjugated molecular semiconductor materials. Despite the customizable molecular building blocks, predicting their supramolecular structure remains a challenge. Traditionally, force field methods have been used due to the complexity of these structures, but advances in computational power have enabled ab initio approaches such as density functional theory (DFT). DFT is particularly suitable for finding energetically favorable structures of dye aggregates, which are determined by a large number of different interactions, but a systematic aggregate search can still be very challenging due to the large number of possible geometries. In this work, we show ways to overcome this challenge. We investigate how finely translational and rotational lattices must be structured to identify all energetic minima of π-stack structures, focusing on porphyrins as a prototype challenge. Our approach involves single-point DFT calculations of systematically varied dimer geometries, identification of local energy minima, hierarchical grouping of geometrically similar structures, and optimization of the energetically favorable representatives of each geometric family. This ab initio method provides a general framework for the systematic prediction of aggregate structures and reveals geometrically diverse and energetically favorable dimers.

Filling the gaps: Introducing plasticizers into π-conjugated OPE-NH2 Langmuir layers for defect-free anisotropic interfaces and membranes towards unidirectional mass, charge, or energy transfer

The construction of ultrathin membranes from linearly aligned π-electron systems is advantageous for targeted energy, charge, or mass transfer. The Langmuir-Blodgett (LB) technique enables the creation of such membranes, especially with amphiphilic π-electron systems. However, these systems often aggregate, forming rigid Langmuir monolayers with defects or holes. In this study we introduce plasticizers to effectively address this issue. To create anisotropic membranes, we used an oligo(phenylene ethynylene) derivative (OPE-NH2) as an linear amphiphile and bisphenol A di-tert-butyl ester (BPAE) as a plasticizer. We analyzed surface pressure (mean molecular area) (Π(mma)) isotherms and characterized Langmuir monolayers with Brewster Angle Microscopy (BAM), to determine the optimal miscibility of OPE-NH2 with BPAE. Detailed analysis of hole areas filled was performed through image binarization. We identified an optimal BPAE concentration of 4 mol-% in the OPE-NH2 Langmuir monolayer. Our BAM image evaluation via binarization determined the difference between the mean molecular areas of close-packed Langmuir domains and those quantified via the Π(mma) isotherm. This study presents an automated method for BAM image analysis and a new approach for fabricating defect-free anisotropic molecular monolayers of π-conjugated amphiphiles.

Self-standing membranes for separation: Achievements and opportunities

Supported membranes and mixed matrix membranes have a limitation of harming the mass transfer due to the incompatibility between the support layer or the matrix and the active components of the membrane. Self-standing membranes, which could structurally abandon the support layer, altogether avoid the adverse effect, thus greatly facilitating the transmembrane mass transfer process. However, the abandonment of the support layer also reduces the membrane's mechanical properties and formability. In this review, our emphasis will be on self-standing membranes within the realm of materials and separation engineering. We will explore the materials employed in the fabrication of self-standing membranes, highlighting their ability to simultaneously enhance membrane performance and promote self-standing characteristics. Additionally, we will delve into the diverse techniques utilized for crafting self-standing membranes, encompassing interfacial polymerization, filtration, solvent casting, Langmuir-Blodgett & layer-by-layer assembly, electrospinning, compression, etc. Throughout the discussion, the merits and drawbacks associated with each of these preparation methods were elucidated. We also provide a brief overview of the applications of self-standing membranes, including water purification, gas separation, organic solvent nanofiltration, electrochemistry, and membrane reactor, as well as a brief description of the general strategies for performance enhancement of self-standing membranes. Finally, the current status of self-standing membranes and the challenges they may encounter were discussed.

High adsorption capacities for dyes by a pH-responsive sodium alginate/sodium lignosulfonate/carboxylated chitosan/polyethyleneimine adsorbent

Dyes are indispensable for the rapid development of society, but untreated dye wastewater can threaten human health. In this study, an adsorbent (SA/SL/CCS/PEI@MNPs) was synthesized by one-pot method using magnetic nanoparticles (MNPs), sodium alginate (SA), sodium lignosulfonate (SL), carboxylated chitosan (CCS) and polyethyleneimine (PEI). The adsorbent was mesoporous micrometer-sized particles with pore size of 34.92 nm, which was favorable for dynamic column experiments. SA/SL/CCS/PEI@MNPs possessed pH-responsive performance. Under acidic condition, the maximum adsorption capacities for anionic dyes (tartrazine, reactive black-5, indigo carmine) reached >550 mg/g. Under alkaline condition, those for cationic dyes (methylene blue, methyl violet, neutral red) exceeded 1900 mg/g. The function of the various modifiers was investigated. The results indicated that the incorporation of SL, CCS and PEI was able to provide plenty of sulfonate, carboxylate and amino/imine reactive groups so that adsorption capacities of dyes were improved. The adsorption mechanism was explored by FTIR and XPS. At the same time, the adsorption mechanism was more deeply analyzed using molecular dynamics simulations and radial distribution function. It was demonstrated that the dyes adsorption on the SA/SL/CCS/PEI@MNPs was mainly due to electrostatic attraction and π-π interaction. In addition, the adsorbent had good reusability, and the removal still reached over 90 % after five cycles. In conclusion, the adsorbent displayed a broad prospect for the adsorption of organic dyes.

Tailoring the Weight of Surface and Intralayer Edge States to Control LUMO Energies

The energies of the frontier molecular orbitals determine the optoelectronic properties in organic films, which are crucial for their application, and strongly depend on the morphology and supramolecular structure. The impact of the latter two properties on the electronic energy levels relies primarily on nearest-neighbor interactions, which are difficult to study due to their nanoscale nature and heterogeneity. Here, an automated method is presented for fabricating thin films with a tailored ratio of surface to bulk sites and a controlled extension of domain edges, both of which are used to control nearest-neighbor interactions. This method uses a Langmuir-Schaefer-type rolling transfer of Langmuir layers (rtLL) to minimize flow during the deposition of rigid Langmuir layers composed of π-conjugated molecules. Using UV-vis absorption spectroscopy, atomic force microscopy, and transmission electron microscopy, it is shown that the rtLL method advances the deposition of multi-Langmuir layers and enables the production of films with defined morphology. The variation in nearest-neighbor interactions is thus achieved and the resulting systematically tuned lowest unoccupied molecular orbital (LUMO) energies (determined via square-wave voltammetry) enable the establishment of a model that functionally relates the LUMO energies to a morphological descriptor, allowing for the prediction of the range of accessible LUMO energies.

Supramolecular Control of Photonic Response and Sensing of Nitricoxide using Iron(III) Corrole Monolayers and Their Stacks

In this work, we assemble amphiphilic iron(III) corroles at air-water interfaces into well-defined quasi-two-dimensional molecular monolayers and theirs stacks for sensing of nitric oxide (NO). For this purpose, we use the Langmuir-Blodgett (LB) technique, which allows varying the packing density of iron(III) corroles anchored to the aqueous subphase via one molecular side. The stacks of ten down to three molecular monolayers on the front and back sides of the substrates are sufficiently optically dense to detect NO binding to the layers photometrically. This sensing with few layers demonstrates the potential for electronic detection, where very thin surface functionalizations enable efficient electronic communication between the layer and the (semi)conductor. Despite increasing optical densities, the spectral responses to NO exposure become smaller with increasing packing density until the collapse point of the monolayers is reached. This demonstrates that the highest molecular efficiency for binding and detection of NO is achieved at the smallest packing densities. This finding is relevant to all molecular sensor films with axial binding of analytes to the sensor molecules and demonstrates the advantage of sensor molecule assembly into monolayers on water-air interfaces using the LB technique.