Strong Interlayer Coupling in Twisted Transition Metal Dichalcogenide Moiré Superlattices

Pressure-Enhanced Interlayer Coupling and Hybridized Excitons in Twisted MoS2 Moiré Quasicrystals

Moiré quasicrystals, characterized by broken translational symmetry, emerge in van der Waals (vdW) bilayers twisted 30°, resulting in unique interlayer coupling. Despite their intriguing properties, the modulation of interlayer interactions and its impact on the electronic and phononic behavior of moiré quasicrystals remain underexplored. Here, we synthesize 30° twisted MoS2 bilayers and employ diamond anvil cell (DAC) technology to dynamically tune their moiré phonons and excitons. Enhanced interlayer coupling under pressure strengthens the moiré potential, shifting the moiré phonon away from pristine Raman modes. Furthermore, the broken translational symmetry in moiré quasicrystals facilitates intervalley coupling via Umklapp scattering, leading to hybridized interlayer excitons. These hybridized excitons induce a nonmonotonic shift in the photoluminescence peak under pressure, due to the mixing of intralayer and interlayer exciton states. Our findings offer new insights into the physics of moiré quasicrystals and demonstrate high-pressure modulation as a powerful tool for probing and controlling their physical properties.

Twist Angle-Dependent Exciton Mobility in WS2 Bilayers

Bilayer WS2 shows exceptional promise for excitonic devices due to its defect tolerance, high carrier density, and angle-tunable electronic properties. However, fundamental understanding of twist angle-dependent exciton transport remains limited due to challenges in sample preparation and interplays between interlayer coupling and moiré potential. Using transient reflection microscopy (TRM), we systematically studied exciton mobility in chemical vapor deposition-grown (CVD-grown) bilayer WS2 with different twist angles. At 0°, strong interlayer coupling without moiré potential effects yielded the highest exciton mobility (87.3 cm2/V s)- 10-fold greater than monolayer WS2-with a 1.06 μm diffusion length, while the 25° sample showed reduced mobility (44.5 cm2/(V s)) and shorter diffusion length (0.88 μm) due to weakened coupling and moiré potential effects, and the 60° case exhibited intermediate characteristics. This work demonstrates that interlayer coupling and moiré potential modulation critically determine exciton transport dynamics in layered two-dimensional semiconductors, providing essential guidelines for device engineering.

Tunable WSe2-MoSe2 Lateral Heterojunction Photodetector Based on Piezoelectric and Flexoelectric Effects

Two-dimensional transition metal dichalcogenides (TMDs) with piezoelectric effects are ideal materials for future wearable devices. While enhancing the piezoelectric performance by forming vertical heterojunctions, shortcomings such as contamination at the heterojunction interface and limited built-in electric field width have been noticed. In this work, a lateral heterojunction of monolayer WSe2-MoSe2 with type-II band alignment was employed to amplify the electromechanical optoelectronic efficiency. The considerable built-in field width (BFW) in the lateral heterojunction facilitates rapid separation of carriers. The lattice mismatch induced a flexoelectric effect during the lateral heterojunction growth. The flexoelectric and piezoelectric effects under external strain can regulate the photodetector performance of the device. Under the compressive strain of -0.93%, the photocurrent increased 9.1 times compared to the tensile strain of 0.47%. Flexoelectric effect can reduce the dark current under no external strain. This work reveals the roles of flexoelectric and piezoelectric effects in enhancing photoelectric conversion, suggesting lateral heterojunction devices may be applied in the field of flexible low-light detection.

Towards the scalable synthesis of two-dimensional heterostructures and superlattices beyond exfoliation and restacking

Two-dimensional transition metal dichalcogenides, which feature atomically thin geometry and dangling-bond-free surfaces, have attracted intense interest for diverse technology applications, including ultra-miniaturized transistors towards the subnanometre scale. A straightforward exfoliation-and-restacking approach has been widely used for nearly arbitrary assembly of diverse two-dimensional (2D) heterostructures, superlattices and moiré superlattices, providing a versatile materials platform for fundamental investigations of exotic physical phenomena and proof-of-concept device demonstrations. While this approach has contributed importantly to the recent flourishing of 2D materials research, it is clearly unsuitable for practical technologies. Capturing the full potential of 2D transition metal dichalcogenides requires robust and scalable synthesis of these atomically thin materials and their heterostructures with designable spatial modulation of chemical compositions and electronic structures. The extreme aspect ratio, lack of intrinsic substrate and highly delicate nature of the atomically thin crystals present fundamental difficulties in material synthesis. Here we summarize the key challenges, highlight current advances and outline opportunities in the scalable synthesis of transition metal dichalcogenide-based heterostructures, superlattices and moiré superlattices.

Triflic Acid-Assisted Regioselective Bromination of Quinoxaline Derivatives Enables a Facile Synthesis of Polymer PTQ10

Poly[(thiophene)-alt-(6,7-difluoro-2(2-hexyldecyloxy)quinoxaline)] (PTQ10) emerges as a promising candidate for donor materials in organic solar cells (OSCs) due to its high efficiency, simplified synthesis, and cost-effectiveness. The acceptor unit of PTQ10 is derived from the alkylation of 5,8-dibromo-6,7-difluoroquinoxaline-2-ol, emphasizing the importance of its economical synthesis for commercial viability. This study investigates triflic acid-assisted regioselective bromination of quinoxaline derivatives and proposes an alternative synthetic pathway for PTQ10. The developed route benefits from concise synthetic steps, a dependable procedure, and high overall yield. Starting with the condensation of 4,5-difluorobenzene-1,2-diamine with ethyl oxoacetate to yield 6,7-difluoroquinoxaline-2-ol, subsequent triflic acid-assisted regioselective bromination produces 5,8-dibromo-6,7-difluoroquinoxaline-2-ol in high yield. Alkylation under Mitsunobu reaction conditions yields 5,8-dibromo-6,7-difluoro-2-(2-hexyldecyloxy)quinoxaline, followed by polymerization with 2,5-distannylated thiophene under Stille reaction conditions to afford PTQ10. This research provides insights into efficient synthetic strategies for PTQ10, advancing its potential for commercial application in OSCs.

Synthesis, Modulation, and Application of Two-Dimensional TMD Heterostructures

Two-dimensional (2D) transition metal dichalcogenide (TMD) heterostructures have attracted a lot of attention due to their rich material diversity and stack geometry, precise controllability of structure and properties, and potential practical applications. These heterostructures not only overcome the inherent limitations of individual materials but also enable the realization of new properties through appropriate combinations, establishing a platform to explore new physical and chemical properties at micro-nano-pico scales. In this review, we systematically summarize the latest research progress in the synthesis, modulation, and application of 2D TMD heterostructures. We first introduce the latest techniques for fabricating 2D TMD heterostructures, examining the rationale, mechanisms, advantages, and disadvantages of each strategy. Furthermore, we emphasize the importance of characteristic modulation in 2D TMD heterostructures and discuss some approaches to achieve novel functionalities. Then, we summarize the representative applications of 2D TMD heterostructures. Finally, we highlight the challenges and future perspectives in the synthesis and device fabrication of 2D TMD heterostructures and provide some feasible solutions.

Understanding epitaxial growth of two-dimensional materials and their homostructures

The exceptional physical properties of two-dimensional (2D) van der Waals (vdW) materials have been extensively researched, driving advances in material synthesis. Epitaxial growth, a prominent synthesis strategy, enables the production of large-area, high-quality 2D films compatible with advanced integrated circuits. Typical 2D single crystals, such as graphene, transition metal dichalcogenides and hexagonal boron nitride, have been epitaxially grown at a wafer scale. A systematic summary is required to offer strategic guidance for the epitaxy of emerging 2D materials. Here we focus on the epitaxy methodologies for 2D vdW materials in two directions: the growth of in-plane single-crystal monolayers and the fabrication of out-of-plane homostructures. We first discuss nucleation control of a single domain and orientation control over multiple domains to achieve large-scale single-crystal monolayers. We analyse the defect levels and measures of crystalline quality of typical 2D vdW materials with various epitaxial growth techniques. We then outline technical routes for the growth of homogeneous multilayers and twisted homostructures. We further summarize the current strategies to guide future efforts in optimizing on-demand fabrication of 2D vdW materials, as well as subsequent device manufacturing for their industrial applications.

Exciton Localization Modulated by Ultradeep Moiré Potential in Twisted Bilayer γ-Graphdiyne

Twisted moiré superlattice is featured with its moiré potential energy, the depth of which renders an effective approach to strengthening the exciton-exciton interaction and exciton localization toward high-performance quantum photonic devices. However, it remains as a long-standing challenge to further push the limit of moiré potential depth. Herein, owing to the pz orbital induced band edge states enabled by the unique sp-C in bilayer γ-graphdiyne (GDY), an ultradeep moiré potential of ∼289 meV is yielded. After being twisted into the hole-to-hole layer stacking configuration, the interlayer coupling is substantially intensified to augment the lattice potential of bilayer GDY up to 475%. The presence of lateral constrained moiré potential shifts the spatial distribution of electrons and holes in excitons from the regular alternating mode to their respective separated and localized mode. According to the well-established wave function distribution of electrons contained in excitons, the AA-stacked site is identified to serve for exciton localization. This work extends the materials systems available for moiré superlattice design further to serial carbon allotropes featured with benzene ring-alkyne chain coupling, unlocking tremendous potential for twistronic-based quantum device applications.

Precise Crystal Orientation Identification and Twist-Induced Giant Modulation of Optical Anisotropy in 1T'-ReS2

The ability to precisely identify crystal orientation as well as to nondestructively modulate optical anisotropy in atomically thin rhenium dichalcogenides is critical for the future development of polarization programmable optoelectronic devices, which remains challenging. Here, we report a modified polarized optical imaging (POI) method capable of simultaneously identifying in-plane (Re chain) and out-of-plane (c-axis) crystal orientations of the monolayer to few-layer ReS2, meanwhile, propose a nondestructive approach to modulate the optical anisotropy in ReS2 via twist stacking. The results show that parallel and near-cross POI are effective to independently identify the in-plane and out-of-plane crystal orientations, respectively, while regulating the twist angle allows for giant modulation of in-plane optical anisotropy from highly intrinsic anisotropy to complete optical isotropy in the stacked ReS2 bilayer (with either the same or opposite c-axes), as well modeled by linear electromagnetic theory. Overall, this study not only develops a simple optical method for precise crystal orientation identification but also offers an efficient light polarization control strategy, which is a big step toward the practical application of anisotropic van der Waals materials in the design of nanophotonic and optoelectronic devices.

Research Progress of Single-Photon Emitters Based on Two-Dimensional Materials

From quantum communications to quantum computing, single-photon emitters (SPEs) are essential components of numerous quantum technologies. Two-dimensional (2D) materials have especially been found to be highly attractive for the research into nanoscale light-matter interactions. In particular, localized photonic states at their surfaces have attracted great attention due to their enormous potential applications in quantum optics. Recently, SPEs have been achieved in various 2D materials, while the challenges still remain. This paper reviews the recent research progress on these SPEs based on various 2D materials, such as transition metal dichalcogenides (TMDs), hexagonal boron nitride (hBN), and twisted-angle 2D materials. Additionally, we summarized the strategies to create, position, enhance, and tune the emission wavelength of these emitters by introducing external fields into these 2D system. For example, pronounced enhancement of the SPEs' properties can be achieved by coupling with external fields, such as the plasmonic field, and by locating in optical microcavities. Finally, this paper also discusses current challenges and offers perspectives that could further stimulate scientific research in this field. These emitters, due to their unique physical properties and integration potential, are highly appealing for applications in quantum information and communication, as well as other physical and technological fields.

Strain Engineering of Twisted Bilayer Graphene: The Rise of Strain-Twistronics

The layer-by-layer stacked van der Waals structures (termed vdW hetero/homostructures) offer a new paradigm for materials design-their physical properties can be tuned by the vertical stacking sequence as well as by adding a mechanical twist, stretch, and hydrostatic pressure to the atomic structure. In particular, simple twisting and stacking of two layers of graphene can form a uniform and ordered Moiré superlattice, which can effectively modulate the electrons of graphene layers and lead to the discovery of unconventional superconductivity and strong correlations. However, the twist angle of twisted bilayer graphene (tBLG) is almost unchangeable once the interlayer stacking is determined, while applying mechanical elastic strain provides an alternative way to deeply regulate the electronic structure by controlling the lattice spacing and symmetry. In this review, diverse experimental advances are introduced in straining tBLG by in-plane and out-of-plane modes, followed by the characterizations and calculations toward quantitatively tuning the strain-engineered electronic structures. It is further discussed that the structural relaxation in strained Moiré superlattice and its influence on electronic structures. Finally, the conclusion entails prospects for opportunities of strained twisted 2D materials, discussions on existing challenges, and an outlook on the intriguing emerging field, namely "strain-twistronics".

Reconfiguring nucleation for CVD growth of twisted bilayer MoS2 with a wide range of twist angles

Twisted bilayer (TB) transition metal dichalcogenides (TMDCs) beyond TB-graphene are considered an ideal platform for investigating condensed matter physics, due to the moiré superlattices-related peculiar band structures and distinct electronic properties. The growth of large-area and high-quality TB-TMDCs with wide twist angles would be significant for exploring twist angle-dependent physics and applications, but remains challenging to implement. Here, we propose a reconfiguring nucleation chemical vapor deposition (CVD) strategy for directly synthesizing TB-MoS2 with twist angles from 0° to 120°. The twist angles-dependent Moiré periodicity can be clearly observed, and the interlayer coupling shows a strong relationship to the twist angles. Moreover, the yield of TB-MoS2 in bilayer MoS2 and density of TB-MoS2 are significantly improved to 17.2% and 28.9 pieces/mm2 by tailoring gas flow rate and molar ratio of NaCl to MoO3. The proposed reconfiguring nucleation approach opens an avenue for the precise growth of TB-TMDCs for both fundamental research and practical applications.

Pressure-Induced Dynamic Tuning of Interlayer Coupling in Twisted WSe2/WSe2 Homobilayers

Moiré superlattices induced by twisted van der Waals (vdW) heterostructures or homostructures have recently gained significant attention due to their potential to generate exotic strong-correlation electronic and phonon phenomena. However, the lack of dynamic tuning for interlayer coupling of moiré superlattices hinders a thorough understanding and development of the moiré correlation state. Here, we present a dynamic tuning method for twisted WSe2/WSe2 homobilayers using a diamond anvil cell (DAC). We demonstrate the powerful tuning of interlayer coupling and observe an enhanced response to pressure for interlayer breathing modes and the rapid descent of indirect excitons in twisted WSe2/WSe2 homobilayers. Our findings indicate that the introduction of a moiré superlattice for WSe2 bilayers gives rise to hybridized excitons, which lead to the different pressure-evolution exciton behaviors compared to natural WSe2 bilayers. Our results provide a novel understanding of moiré physics and offer an effective method to tune interlayer coupling of moiré superlattices.