Multi-Stimuli-Responsive Amphiphilic Pyridinium Salt and Its Application in the Visualization of Level 3 Details in Latent Fingerprints

Solvent-Responsive Nonporous Adaptive Crystals Derived from Pyridinium Hydrochloride and the Application in Iodine Adsorption

Nonporous adaptive crystals (NACs) are crystalline nonporous materials that can undergo a structural adaptive phase transformation to accommodate specific guest via porous cavity or lattice voids. Most of the NACs are based on pillararenes because of their flexible backbone and intrinsic porous structure. Here a readily prepared organic hydrochloride of 4-(4-(diphenylamino)phenyl)pyridin-1-ium chloride (TPAPyH), exhibiting the solvent dimension-dependent adaptive crystallinity is reported. Wherein it forms a nonporous α crystal in a solvent with larger dimensions, while forming two porous β and γ crystals capable of accommodating solvent molecules in solvent with small size. Furthermore, the thermal-induced single-crystal-to-single-crystal (SCSC) transition from the β to α phase can be initiated. Upon exposure to iodine vapor or immersion in aqueous solution, the nonporous α phase transforms to porous β phase by adsorbing iodine molecules. Owing to the formation of trihalide anion I2Cl- within the crystal cavity, TPAPyH exhibits remarkable performance in iodine storage, with a high uptaking capacity of 1.27 g g-1 and elevated iodine desorption temperature of up to 110 and 82 °C following the first and second adsorption stage. The unexpected adaptivity of TPAPyH inspires the design of NACs for selective adsorption and separation of volatile compound from organic small molecules.

Förster Resonance Energy Transfer: Stimulus-Responsive Purely Organic Room Temperature Phosphorescence through Dynamic B-N bond

Recently, stimulus-responsive organic materials with room-temperature phosphorescence (RTP) properties have attracted significant attention owing to their potential applications in chemical sensing, anticounterfeiting, and displays. However, molecular design currently lacks systematicity and effectiveness. Herein, we report a capture-release strategy for the construction of reversible RTP via B/N Lewis pairs. Specifically, the RTP of the Lewis acid of 7-bromo-5,9-dioxa-13b-boranaphtho[3,2,1-de]anthracene (BrBA) can be deactivated through capturing by the Lewis base, N,N-diphenyl-4-(pyridin-4-yl)aniline (TPAPy), and reactivated by dissociation of B-N bonds to release BrBA. Reversible RTP is attributed to the exceptional self-assembly capability of BrBA, whereas the tunable RTP colors are derived from distinct Förster resonance energy transfer (FRET) processes. The potential applications of RTP materials in information storage and anti-counterfeiting were also experimentally validated. The capture-release approach proposed in this study offers an effective strategy for designing stimulus-responsive materials.

Solid-Emission-Tunable Squaraine with Thermal-Promoted Aggregate-State Transitions for Fast Thermal History Sensing

Determining thermal history is crucial in many industrial processes, but reliable and sensitive organic thermal history indicators are currently absent. Herein, we report on the development of a squaraine-based fluorescent molecule, DPEA-SQ, for the detection of thermal exposure histories up to 436 K. DPEA-SQ forms multiple single crystals (DPEA-SQ-I, DPEA-SQ-II, and DPEA-SQ-III) with different conformations and aggregate-state packing modes, contributing to their different fluorescence wavelengths, lifetimes, and efficiencies. Interestingly, DPEA-SQ-I and DPEA-SQ-III undergo aggregate-state structural transitions to form the thermodynamically more stable DPEA-SQ-II, which are accompanied by changes in their fluorescence. By taking advantage of similar aggregate-state structural transformations during heating, a high-temperature thermal exposure history of up to 436 K is recorded and reflected by their fluorescence. To demonstrate the potential practical applications of DPEA-SQ, a DPEA-SQ-Powder/PDMS film is prepared and coated on an electric circuit board, which enables real-time monitoring of localized overheating by the naked eye. Additionally, the fluorescence peaks of DPEA-SQ-Powder and DPEA-SQ-Powder/PDMS films remain unchanged after storage at 373 K for 52 days, demonstrating high aggregate-state stability. The fast and reliable responses of this system make it an excellent candidate for the detection of overtemperature traces in electronic components and circuit diagnosis.

Photorewriting, Time-Resolved Encryption, and Unclonable Anticounterfeiting with Artificial Intelligence Authentication via a Reversible Photoswitchable System

In the fields of photolithographic patterning, optical anticounterfeiting, and information encryption, reversible photochromic materials with solid-state fluorescence are emerging as a potential class of systems. A design strategy for reversible photochromic materials has been proposed and synthesized through the introduction of photoactive thiophene groups into the molecular backbone of aryl vinyls, compounds with unique aggregation-induced emission properties, and solid-state reversible photocontrollable fluorescence and color-changing properties. This work develops novel photochromic inks, films, and cellulose hydrogels for enhancing the security of information encryption and anticounterfeiting technologies. They achieve rapid and reversible color change under ultraviolet light irradiation. Dependent upon the rate of color change, higher levels of time-resolved security can be achieved. This feature is important for enhancing the confidentiality of encrypted information and the reliability of security labels. Color-changing cellulose hydrogels, inks, and films consisting of three photochromic fluorescent molecules have quick photoactivity, great photoreversibility and photostability, and good processability, making them ideal for time-delayed anticounterfeiting and smart encryption. Furthermore, specialized algorithms are used to construct convolutional neural networks, and image analysis is performed on these systems, thus solving the current problem of the time-consuming information decryption process. This artificial intelligence method offers new opportunities for enhanced data encryption.

Grinding-Induced Water Solubility Exhibited by Mechanochromic Luminescent Supramolecular Fibers

Most mechanochromic luminescent compounds are crystalline and highly hydrophobic; however, mechanochromic luminescent molecular assemblies comprising amphiphilic molecules have rarely been explored. This study investigated mechanochromic luminescent supramolecular fibers composed of dumbbell-shaped 9,10-bis(phenylethynyl)anthracene-based amphiphiles without any tetraethylene glycol (TEG) substituents or with two TEG substituents. Both amphiphiles formed water-insoluble supramolecular fibers via linear hydrogen bond formation. Both compounds acquired water solubility when solid samples composed of supramolecular fibers are ground. Grinding induces the conversion of 1D supramolecular fibers into micellar assemblies where fluorophores can form excimers, thereby resulting in a large redshift in the fluorescence spectra. Excimer emission from the ground amphiphile without TEG chains is retained after dissolution in water. The micelles are stable in water because hydrophilic dendrons surround the hydrophobic luminophores. By contrast, when water is added to a ground amphiphile having TEG substituents, fragmented supramolecular fibers with the same molecular arrangement as the initial supramolecular fibers are observed, because fragmented fibers are thermodynamically preferable to micelles as the hydrophobic arrays of fluorophores are covered with hydrophilic TEG chains. This leads to the recovery of the initial fluorescent properties for the latter amphiphile. These supramolecular fibers can be used as practical mechanosensors to detect forces at the mesoscale.

Synthesis, structure, photophysical property, stability of tetraphenylethylene-based boranil, and applications in cell imaging

A new family of tetraphenylethylene-based N,O-chelated boranil complexes (TPE-BAs) with aggregation-induced emission (AIE) characteristics were developed. X-ray crystallographic analysis indicated that the terminal substituents on the aniline moiety significantly affected the intermolecular stacking mode, thereby influencing the photophysical properties. The stabilities of these compounds are closely related to the substituents on the aniline moiety. Electron-donor-substituted TPE-BA-OMe exhibited the best stability, whereas the electron-acceptor-substituted compounds exhibited poor stability. Benefitting from its AIE properties and suitable lipophilicity, TPE-BA-OMe served as an excellent fluorescent probe for the specific bioimaging of lipid droplets in living cells.

Hydrophilic Cocrystals with Water Switched Luminescence

Utilizing water molecules to regulate the luminescence properties of solid materials is highly challenging. Herein, we develop a strategy to produce water-triggered luminescence-switching cocrystals by coassembling hydrophilic donors with electron-deficient acceptors, where 1,2,4,5-Tetracyanobenzene (TCNB) was used as the electron acceptor and pyridyl benzimidazole derivatives were used as the electron donors enabling multiple hydrogen-bonds. Two cocrystals, namely 2PYTC and 4PYTC were obtained and showed heat-activated emission, and such emission could be quenched or weakened by adding water molecules. The cocrystal structure exhibited the donor molecule that can form multiple hydro bonds with water and acceptor molecules due to the many nitrogen atoms of them. The analyses of the photophysical data, powder X-ray diffraction, and other data confirmed the reversible fluorescence "on-off" effects were caused by eliminating and adding water molecules in the crystal lattice. The density functional theory calculations indicate that the vibration of the O-H bond of water molecules in the cocrystal can absorb the excitation energy and suppress fluorescence. Furthermore, the obtained cocrystals also showed temperature, humidity, and H+ /NH4 + responsive emission behavior, which allows their applications as thermal and humidity sensors, and multiple information encryptions. This research paves the way for preparing intelligent hydrophilic organic cocrystal luminescent materials.

Multifunctional Eu(III)-modified HOFs: roxarsone and aristolochic acid carcinogen monitoring and latent fingerprint identification based on artificial intelligence

The exploration of multifunctional materials and intelligent technologies used for fluorescence sensing and latent fingerprint (LFP) identification is a research hotspot of material science. In this study, an emerging crystalline luminescent material, Eu3+-functionalized hydrogen-bonded organic framework (Eu@HOF-BTB, Eu@1), is fabricated successfully. Eu@1 can emit purple red fluorescence with a high photoluminescence quantum yield of 36.82%. Combined with artificial intelligence (AI) algorithms including support vector machine, principal component analysis, and hierarchical clustering analysis, Eu@1 as a sensor can concurrently distinguish two carcinogens, roxarsone and aristolochic acid, based on different mechanisms. The sensing process exhibits high selectivity, high efficiency, and excellent anti-interference. Meanwhile, Eu@1 is also an excellent eikonogen for LFP identification with high-resolution and high-contrast. Based on an automatic fingerprint identification system, the simultaneous differentiation of two fingerprint images is achieved. Moreover, a simulation experiment of criminal arrest is conducted. By virtue of the Alexnet-based fingerprint analysis platform of AI, unknown LFPs can be compared with a database to identify the criminal within one second with over 90% recognition accuracy. With AI technology, HOFs are applied for the first time in the LFP identification field, which provides a new material and solution for investigators to track criminal clues and handle cases efficiently.

The Key Role of Molecular Packing in Luminescence Property: From Adjacent Molecules to Molecular Aggregates

The luminescence materials act as the key components in many functional devices, as well as the detection and imaging systems, which can be permeated in each aspect of modern life, and attract more and more attention for the creative technology and applications. In addition to the diverse properties of organic luminogens, the multiple molecular packing at aggregated states frequently offers new and/or exciting performance. However, there still lacks comprehensive analysis of molecular packing in these organic materials, resulting in an increased gap between molecular design and practical applications. In this review, from the basic knowledge of organic compounds as single molecules, to the discernable property of excimer, charge transfer (CT) complex or self-assembly systems by adjacent molecules, and finally to the opto-electronic performance of molecular aggregates, the relevant factors to molecular packing and practical applications are discussed.

Molecular and Aggregate Synergistic Engineering of Aggregation-Induced Emission Luminogens to Manipulate Optical/Electronic Properties for Efficient and Diversified Functions

The optical/electronic properties of organic luminescent materials can be regulated by molecular structure modification, which not only requires sophisticated and time-consuming synthesis but also is unable to accurately afford the optical properties of materials in the aggregate state. Herein, a facile strategy of molecular and aggregate synergistic engineering is proposed to manipulate the optical/electronic properties of a luminogen, ACIK, in the solid state for efficient and diversified functions. ACIK is facilely synthesized and exhibits three polymorphic states (ACIK-Y, ACIK-R, and ACIK-N) with a large emission difference of 102 nm from yellow to near-infrared (NIR). Their structure-property relationships were investigated by crystallographic analyses and computational studies. ACIK-Y, with the most twisted structure, exhibits an intriguing color-tuned fluorescence between yellow and NIR in the solid state in response to multiple stimuli. Shuttle-like ACIK-R microcrystals exhibit an optical waveguide property with a low optical loss coefficient of 19 dB mm^-1. ACIK dots display bright NIR-I emission, large Stokes shift, and strong NIR-II two-photon absorption. ACIK dots show specific lipid droplets-targeting capability and can be successfully applied for two-photon fluorescence imaging of mouse brain vasculature with deep penetration and high spatial resolution. This study will inspire more insights in developing advanced optical/electronic materials based on a single chromophore for practical applications.