In Situ Regulating Cobalt/Iron Oxide-Oxyhydroxide Exchange by Dynamic Iron Incorporation for Robust Oxygen Evolution at Large Current Density

Fine-tuning nanoflower-like Fe/Co hybrids with high content oxyhydroxide accelerating oxygen evolution kinetics

Iron hydroxide (FeOOH) is a potential active component in iron-based electrocatalysts for water electrolysis. However, its catalytic performance is constrained by its slow oxygen evolution reaction (OER) kinetics. Herein, we synthesized a nanoflower-like FeCo-hydro(oxy)oxides composite with tunable Fe/Co ratios (Fex-Coy) on nickel foam (NF) via a one-step electrodeposition technique. This method allows for precise control over the morphology and composition of the hybrid nanoflowers. The optimized Fe9-Co1 discloses favorable OER performance with a low overpotential of 222 mV at 50 mA cm-2 and demonstrates good stability exceeding 60 h at 10 mA cm-2. Further, an assembled Fe9-Co1(+)||Pt/C(-) dual-electrode configuration achieves a low cell voltage of 1.73 V at the current density of 100 mA cm-2 for water splitting, with long-term stability for 70 h and minimal degradation. Studies indicate that the distinctive nanoflower morphology of Fe9-Co1 enhances active site exposure, while both FeOOH and reconstructed CoOOH serve as catalytic centers, contributing to the observed OER performance. This work introduces a facile approach for synthesizing OER electrocatalysts, underscoring the role of the high-valence state of Fe/Co as active sites in the OER process.

Arming Amorphous NiMoO4 on Nickel Phosphide Enables Highly Stable Alkaline Seawater Oxidation

Seawater electrolysis holds tremendous promise for the generation of green hydrogen (H2 ). However, the system of seawater-to-H2 faces significant hurdles, primarily due to the corrosive effects of chlorine compounds, which can cause severe anodic deterioration. Here, a nickel phosphide nanosheet array with amorphous NiMoO4 layer on Ni foam (Ni2 P@NiMoO4 /NF) is reported as a highly efficient and stable electrocatalyst for oxygen evolution reaction (OER) in alkaline seawater. Such Ni2 P@NiMoO4 /NF requires overpotentials of just 343 and 370 mV to achieve industrial-level current densities of 500 and 1000 mA cm-2 , respectively, surpassing that of Ni2 P/NF (470 and 555 mV). Furthermore, it maintains consistent electrolysis for over 500 h, a significant improvement compared to that of Ni2 P/NF (120 h) and Ni(OH)2 /NF (65 h). Electrochemical in situ Raman spectroscopy, stability testing, and chloride extraction analysis reveal that is situ formed MoO4 2- /PO4 3- from Ni2 P@NiMoO4 during the OER test to the electrode surface, thus effectively repelling Cl- and hindering the formation of harmful ClO- .

An Fe3+ induced etching and hydrolysis precipitation strategy affords an Fe-Co hydroxide nanotube array toward hybrid water electrolysis

Developing advanced electrocatalysts toward the oxygen evolution reaction (OER) has always been recognized as the key challenge for green hydrogen production via water electrolysis due to the commonly required high OER overpotential. In this work, we report a branched FeCo-based hydroxide nanotube array (Fe-CoCH NT) synthesized by an ambient Fe-modification strategy, which could be used as a monolithic electrode for efficient OER catalysis. Its OER performance was even comparable to that of RuO2 with a low overpotential of 290 mV to attain a current density of 10 mA cm-2 due to its unique branched nanotube array structure and intrinsic high catalytic activity. Moreover, an acid-base hybrid electrolysis system was built based on this catalyst and an FeCo-based phosphide nanotube array electrode. By collecting electrochemical neutralization energy, this system just needs an ultralow cell voltage of 0.97 V to attain a current density of 10 mA cm-2 with a large decrease in energy consumption of 41.9% compared to traditional alkaline water splitting systems.