Analogous Design of a Microlayered Silicon Oxide-Based Electrode to the General Electrode Structure for Thin-Film Lithium-Ion Batteries

Controlled Hierarchical Construction of Ultrahomogeneous Co9S8@CoAl-LDH/NF Layered Core-Shell Heterostructures for High-Performance Asymmetric Supercapacitors

The rational collocation and construction of multiphase composite electrode materials with ingenious structures is a key strategic to enhance the electrochemical performance of supercapacitors (SCs). Within this project, a unique Co9S8@CoAl-LDH/NF core-shell heterostructure consisting of CoAl-LDH/NF ultrathin nanosheets sturdily attached to Co9S8/NF needle-like nanorods is grown in situ on self-supported conductive substrate nickel foam (NF) by an effortless and productive multistep hydrothermal method. The construction of the core-shell structure can effectively enhance the capacitive properties as well as the mechanical strength of the material. Compared with the single-component materials Co9S8/NF (1769.6 mF cm-2 and 91.6%) and CoAl-LDH/NF (858 mF cm-2 and 85.2%), the Co9S8@CoAl-LDH/NF composites have excellent capacitance properties (5052.4 mF cm-2) along with exceptional capacitance retention (5000 cycles) 98.5% even after undergoing charging and discharging. Furthermore, the asymmetric SCs fabricated with Co9S8@CoAl-LDH/NF and AC/NF exhibit an energy density of 0.17 mWh cm-2 at 3.20 mW cm-2. Therefore, the innovative core-shell heterostructure of Co9S8@CoAl-LDH/NF presented in this study holds immense practical potential as a groundbreaking electrode material in the realm of SCs.

Fundamental Understanding of the Low Initial Coulombic Efficiency in SiOx Anode for Lithium-Ion Batteries: Mechanisms and Solutions

To meet the ever-increasing demand for high-energy lithium-ion batteries (LIBs), it is imperative to develop next-generation anode materials. Compared to conventional carbon-based anodes, Si-based materials are promising due to their high theoretical capacity and reasonable cost. SiOx, as a Si-derivative anode candidate, is particularly encouraging for its durable cycling life, the practical application of which is, however, severely hindered by low initial Coulombic efficiency (ICE) that leads to continuous lithium consumption. What is worse, low ICE also easily triggers a terrible chain reaction causing bad cycling stability. To further develop SiOx anode, researchers have obtained in-depth understandings regarding its working/failing mechanisms so as to further propose effective remedies for low ICE mitigation. In this sense, herein recent studies investigating the possible causes that fundamentally result in low ICE of SiOx, based on which a variety of solutions addressing the low ICE issue are discussed and summarized, are timely summarized. This perspective provides valuable insights into the rational design of high ICE SiOx anodes and paves the way toward industrial application of SiOx as the next generation LIB anode.

Effect of Graphene on the Performance of Silicon-Carbon Composite Anode Materials for Lithium-Ion Batteries

(Si/graphite)@C and (Si/graphite/graphene)@C were synthesized by coating asphalt-cracked carbon on the surface of a Si-based precursor by spray drying, followed by heat treatment at 1000 °C under vacuum for 2h. The impact of graphene on the performance of silicon-carbon composite-based anode materials for lithium-ion batteries (LIBs) was investigated. Transmission electron microscopy (TEM) and selected area electron diffraction (SAED) images of (Si/graphite/graphene)@C showed that the nano-Si and graphene particles were dispersed on the surface of graphite, and thermogravimetric analysis (TGA) curves indicated that the content of silicon in the (Si/graphite/graphene)@C was 18.91%. More bituminous cracking carbon formed on the surface of the (Si/graphite/graphene)@C due to the large specific surface area of graphene. (Si/Graphite/Graphene)@C delivered first discharge and charge capacities of 860.4 and 782.1 mAh/g, respectively, initial coulombic efficiency (ICE) of 90.9%, and capacity retention of 74.5% after 200 cycles. The addition of graphene effectively improved the cycling performance of the Si-based anode materials, which can be attributed to the reduction of electrochemical polarization due to the good structural stability and high conductivity of graphene.