2-Pyridone-Directed CuII-Catalyzed General Method of C(sp2)-H Activation for C-S, C-Se, and C-N Cross-Coupling: Easy Access to Aryl Thioethers, Selenide Ethers, and Sulfonamides and DFT Study

We have demonstrated N-substituted 2-pyridones as an N,O-directing group for selective C(sp2)-H-activated thiolation, selenylation, and sulfonamidation of ortho C-H bonds of benzamides. This method utilizes a cost-effective Cu(II)-salt catalyst instead of precious metal catalysts, achieving high yields, including gram-scale synthesis and excellent functional group tolerance. We applied this protocol to access 30 different compounds with high yields, demonstrating thiolation of fluorine-substituted benzamides as well. Density functional theory (DFT) calculations support the mechanism, including acetate-supported concerted metalation deprotonation (CMD) steps and the unique role of dimethyl sulfoxide (DMSO) solvent. The facile synthesis of pharmaceutically important sulfonamides and other compounds highlights the method's potential in chemistry and medicinal chemistry.

Characterization and Reactivity of Copper(II) and Copper(III) σ-Aryl Intermediates in Aminoquinoline-Directed C-H Functionalization

Over the past decade, numerous reports have focused on the development and applications of Cu-mediated C-H functionalization reactions; however, to date, little is known about the Cu intermediates involved in these transformations. This paper details the observation and characterization of CuII and CuIII intermediates in aminoquinoline-directed C(sp2)-H functionalization of a fluoroarene substrate. An initial C(sp2)-H activation at CuII occurs at room temperature to afford an isolable anionic cyclometalated CuII complex. This complex undergoes single-electron oxidation with ferrocenium or AgI salts under mild conditions (5 min at room temperature) to afford C(sp2)-C(sp2) or C(sp2)-NO2 coupling products. Spectroscopic studies implicate the formation of a transient diamagnetic CuIII-σ-aryl intermediate that undergoes either (i) a second C(sp2)-H activation at CuIII followed by C-C bond-forming reductive elimination or (ii) reaction with a NO2- nucleophile and C(sp2)-NO2 coupling.

Microwave-accelerated cross-dehydrogenative-coupling (CDC) of N-(quinolin-8-yl)amides with acetone/acetonitrile under metal-free conditions

A highly selective remote C(sp³)-H acetonation of N-(quinolin-8-yl)amide scaffolds at the C5-position under microwave irradiation has been developed. In the absence of a transition-metal-catalyst, benzoyl peroxide (BPO)-promoted cross-dehydrogenation coupling (CDC) of N-(quinolin-8-yl)amides with acetone/acetonitrile occurred smoothly to generate the corresponding 5-acetonated/acetonitriled N-(quinolin-8-yl)amides in good yields. The transformation is operationally simple, rapid, easily scaled-up to the gram scale, and shows a broad substrate scope.

Redox-neutral rhodium(III)-catalyzed divergent synthesis of tetrasubstituted 1,3-enynes and alkynylated benzofurans

With the assistance of the acetamido directing group (DG), a rhodium-catalyzed C-H alkenylation/DG migration cascade for the synthesis of tetrasubstituted 1,3-enynes from N-phenoxyacetamides and 1,3-diynes has been achieved in this work. Alternatively, a rhodium-catalyzed [3 + 2] annulation for the synthesis of alkynylated benzofurans from the same set of substrates has also been achieved by simply changing the reaction conditions. This work highlights the tunable divergent synthesis of valuable compounds triggered by C-H activation.

Association thermodynamic parameters for nano Cu(NO3)2·2.5H2O with ligands at different temperatures

Association thermodynamic parameters are important because they give information about the nature of ion-ion interaction in solution, the dielectric constant of the medium and the intermolecular hydrogen bonding between the solvent molecules. The different association thermodynamic parameters for nano copper(ii) nitrate hemi pentahydrate in the presence of 4,6-diacetylresorcinol and 4,6-bis(1-hydrazonoethyl)benzene-1,3-diol as ligands were calculated. Conductance measurements were used in different concentrations of binary mixed solvents (DMF and water) at different temperatures, 293.15, 303.15, 313.15 and 323.15 K. A comparison between association thermodynamic parameter data such as association constants (K _A), degree of dissociation (α), free energies of association (ΔG _A), enthalpies of association (ΔH _A) and entropies of association (ΔS _A) in the case of using the two ligands was done. Different calculated thermodynamic parameters indicate that the association is more favorable with 4,6-diacetylresorcinol as a ligand than 4,6-bis(1-hydrazonoethyl)benzene-1,3-diol due to the large size of 6-bis(1-hydrazonoethyl)benzene-1,3-diol.

Amine-Catalyzed Copper-Mediated C-H Sulfonylation of Benzaldehydes via a Transient Imine Directing Group

Transient directing groups (TDGs) can provide a powerful means for C−H functionalization without requiring additional steps for directing group introduction and removal. We report the first use of a TDG in combination with copper to effect C−H functionalization. The regioselective copper mediated β−C(sp²)−H sulfonylation of aldehydes with sulfinate salts is accomplished using catalytic β‐alanine to form a transient imine. A broad range of sulfonylated benzaldehydes are prepared using copper fluoride as both copper source and oxidant, involving a [5,6] cupracyclic intermediate. γ‐(peri)‐Sulfonylation of napthyl and phenanthrenyl carboxaldehydes is achieved through [6,6] cupracyclic intermediates. Further derivatisation of the aldehyde products is demonstrated. Kinetic experiments and Hammett analysis suggest the turnover limiting step to be a concerted asynchronous C−H cleavage via a dearomative Wheland‐type transition state.

Understanding Cu(II)-based systems for C(sp3)-H bond functionalization: insights into the synthesis of aza-heterocycles

Herein we report the synthesis of imidazo[1,5-a]pyridine heterocycles via a Cu(II)-mediated functionalization of α'-C(sp³)-H bonds of pyridinylaldimines and subsequent cyclization. This strategy exploits the inherent directing ability of heteroleptic aldimine and pyridine groups in the substrate yielding the C-H functionalization of α'-methylene groups in a regioselective fashion over distant methyl or methylene groups in β or γ positions. The observed correlation between the nature of the anionic ligands (halide vs. carboxylate) bonded to copper and the chemoselectivity of the C(sp³)-H activation process points to a concerted metalation-deprotonation pathway prior to cyclization to furnish the corresponding imidazo[1,5-a]pyridine derivative. This copper-mediated C(sp³)-H bond functionalization reaction works for a variety of substrates incorporating linear alkyl chains (from 3 to 12 carbon atoms), and good functional group tolerance (aryl, ether and ester groups). Cu-Catalyzed C(sp²)-H cyanation on the imidazole ring can then take place selectively under oxidative conditions.

Transition-Metal-Catalyzed, Coordination-Assisted Functionalization of Nonactivated C(sp3)-H Bonds

Transition-metal-catalyzed, coordination-assisted C(sp³)-H functionalization has revolutionized synthetic planning over the past few decades as the use of these directing groups has allowed for increased access to many strategic positions in organic molecules. Nonetheless, several challenges remain preeminent, such as the requirement for high temperatures, the difficulty in removing or converting directing groups, and, although many metals provide some reactivity, the difficulty in employing metals outside of palladium. This review aims to give a comprehensive overview of coordination-assisted, transition-metal-catalyzed, direct functionalization of nonactivated C(sp³)-H bonds by covering the literature since 2004 in order to demonstrate the current state-of-the-art methods as well as the current limitations. For clarity, this review has been divided into nine sections by the transition metal catalyst with subdivisions by the type of bond formation. Synthetic applications and reaction mechanism are discussed where appropriate.

Manganese-Catalyzed [4 + 2] Annulation of N-H Amidines with Vinylene Carbonate via C-H Activation

Manganese-catalyzed C-H bond functionalization of aryl amidines for the synthesis of 1-aminoisoquinolines in the presence of vinylene carbonate has been developed. The reaction features a broad substrate scope and proceeds under mild reaction conditions with only the carbonate anion as the byproduct.

Copper-catalyzed selective oxidation of hydrazones through C(sp3)-H functionalization

A simple and mild protocol for copper-catalyzed oxidation of hydrazones at the α-position has been reported. Various substrates are compatible, providing the corresponding products in moderate to good yields. This strategy provides an efficient and convenient solution for the synthesis of carbonyl hydrazone. A free radical pathway mechanism is suggested for the transformation.

Copper-catalyzed monoselective C-H amination of ferrocenes with alkylamines

A copper-catalyzed mono-selective C–H amination of ferrocenes assisted by 8-aminoquinoline is presented here. A range of amines, including bioactive molecules, were successfully installed to the ortho-position of ferrocene amides with high efficiency under mild conditions. A range of functionalized ferrocenes were compatible to give the aminated products in moderate to good yields. The gram-scale reaction was smoothly conducted and the directing group could be removed easily under basic conditions.

Redox-Neutral Rhodium(III)-Catalyzed Chemospecific and Regiospecific [4+1] Annulation between Indoles and Alkenes for the Synthesis of Functionalized Imidazo[1,5-a]indoles

Exploiting internal alkenes embedded with an oxidizing function/leaving group as a rare and unconventional one-carbon unit, a redox-neutral rhodium(III)-catalyzed chemo- and regiospecific [4+1] annulation between indoles and alkenes for the synthesis of functionalized imidazo[1,5-a]indoles has been achieved. Internal alkenes employed here can fulfill an unusual [4+1] annulation rather than normal [4+2] annulation/C-H alkenylation. This method is characterized by excellent chemo- and regioselectivity, broad substrate scope, good functional group tolerance, good to high yields, and redox-neutral conditions.

Progress and perspectives on directing group-assisted palladium-catalysed C-H functionalisation of amino acids and peptides

Peptide modifications can unlock a variety of compounds with structural diversity and abundant biological activity. In nature, peptide modifications, such as functionalisation at the side-chain position of amino acids, are performed using post-translational modification enzymes or incorporation of unnatural amino acids. However, accessing these modifications remains a challenge for organic chemists. During the past decades, selective C-H activation/functionalisation has attracted considerable attention in synthetic organic chemistry as a pathway to peptide modification. Various directing group strategies have been discovered that assist selective C-H activation. In particular, bidentate directing groups that enable tuneable and reversible coordination are now recognised as one of the most efficient methods for the site-selective C-H activation and functionalisation of numerous families of organic compounds. Synthetic peptide chemists have harnessed bidentate directing group strategies for selective functionalisation of the β- and γ-positions of amino acids. This method has been expanded and recognised as an effective device for the late stage macrocyclisation and total synthesis of complex peptide natural products. In this review, we discuss various β-, γ-, and δ-C(sp³)-H bond functionalisation reactions of amino acids for the formation of C-X bonds with the aid of directing groups and their application in late-stage macrocyclisation and the total synthesis of complex peptide natural products.

Copper-Catalyzed Direct sp2 C-H Silylation of Arylamides Using Disilanes

A copper-catalyzed method for direct intermolecular ortho-silylation of benzamides has been developed that affords organosilane products in moderate to high yields. The key features include: (i) use of commercially available disilanes as a silicon source with 8-aminoquinoline as a bidentate directing group, (ii) use of earth-abundant first-row transition metal, (iii) operationally simple conditions without the need of an inert atmosphere, and (iv) tolerance of a wide range of functional groups. The practicality and effectiveness of this method have been demonstrated by a gram-scale experiment. This strategy, therefore, constitutes a convenient way of constructing C-Si bonds useful for synthetic organic chemistry.

The Influence of Copper on Halogenation/Dehalogenation Reactions of Aromatic Compounds and Its Role in the Destruction of Polyhalogenated Aromatic Contaminants

The effect of copper and its compounds on halogenation and dehalogenation of aromatic compounds will be discussed in the proposed article. Cu oxidized to appropriate halides is an effective halogenation catalyst not only for the synthesis of halogenated benzenes or their derivatives as desired organic fine chemicals, but is also an effective catalyst for the undesirable formation of thermodynamically stable and very toxic polychlorinated and polybrominated aromatic compounds such as polychlorinated biphenyls, dibenzo-p-dioxins and dibenzofurans accompanied incineration of waste contaminated with halogenated compounds or even inorganic halides. With appropriate change in reaction conditions, copper and its alloys or oxides are also able to effectively catalyze dehalogenation reactions, as will be presented in this review.

Rhodium(III)-catalyzed oxidative alkylation of N-aryl-7-azaindoles with cyclopropanols

An efficient Rh(iii)-catalyzed C-H oxidative alkylation of N-aryl-7-azaindoles with cyclopropanols by merging tandem C-H and C-C cleavage was developed. This transformation features mild reaction conditions, high regioselectivity, and excellent functional group compatibility. The resulting β-aryl ketone derivatives can be readily transformed into 7-azaindole-containing π-extended polycyclic heteroarenes.

Copper-Catalyzed Intramolecular Amination of C(sp3)-H Bond of Secondary Amines to Access Azacycles

The cross-coupling of C-N bond directly from inert C-H bonds is an ideal approach to synthesize saturated azacycles due to its high efficiency and atom economy. In this article, a copper-catalyzed intramolecular amination via the cross coupling of C(sp³)-H and N-H bonds of secondary amine has been reported, which exhibit excellent chemo- and regioselectivity, extensive substrate scope, and functional group tolerance in good to excellent yield, offering an efficient pathway to build nitrogen-containing heterocycle skeletons.

Directing group strategies in catalytic sp2 C–H cyanations: scope, mechanism and limitations

Directing group strategy in transition metal catalyzed sp² C–H bond cyanation has contributed to the direct conversion of hydrocarbons to cyano-containing compounds. Recent developments in transition metal-mediated sp² C–H bond cyanation using this strategy are reviewed.

Room-Temperature Synthesis of Isoindolone Spirosuccinimides: Merger of Visible-Light Photocatalysis and Cobalt-Catalyzed C-H Activation

A room-temperature C-H bond functionalization of benzamides has been developed by merging a photocatalyst with a cobalt catalyst for the synthesis of isoindolone spirosuccinimides. The reaction proceeds in aerobic conditions and does not require any sacrificial external oxidants such as Ag(I) or Mn(III) salts. Visible light activates the photocatalyst, and it acts as an electron-transfer reagent and helps in the fundamental organometallic steps by modulating the oxidation state of the cobalt complex. This C-H bond functionalization and spirocyclization showed wide substrate scope and good functional group tolerance. A possible reaction mechanism was proposed from the experimental outcome, showing that C-H bond activation is irreversible and not the rate-determining step.

MnBr2-Catalyzed Direct and Site-Selective Alkylation of Indoles and Benzo[h]quinoline

Manganese-catalyzed regioselective C-H alkylation of indoles and benzo[h]quinoline with a variety of unactivated alkyl iodides is reported. Unlike other Mn-catalyzed C-H functionalization, this protocol does not require a Grignard reagent base and employs a simple and inexpensive MnBr₂ as a catalyst. This method tolerates diverse functionalities, including fluoro, chloro, bromo, iodo, alkenyl, alkynyl, pyrrolyl, and carbazolyl groups. The alkylation proceeds through a single-electron transfer pathway comprising reversible C-H manganesation and involving an alkyl radical intermediate.

Cp*Co(III)-Catalyzed Ketone-Directed ortho-C-H Activation for the Synthesis of Indene Derivatives

A weakly coordinating, carbonyl-assisted C-H activation of aromatic systems with α,β-unsaturated ketone and subsequent aldol condensation has been developed using a Cp*Co(CO)I₂ catalyst. The developed method is the first example of indene synthesis by cobalt-catalyzed C-H activation. In addition, the reaction requires mild reaction conditions and easily accessible starting materials, and it shows excellent functional group compatibility.

Switchable Copper-Catalyzed Approach to Benzodithiole, Benzothiaselenole, and Dibenzodithiocine Skeletons

A copper-catalyzed reaction between 2-bromo-benzothioamides and S8 or Se involving sulfur rearrangement is reported, enabling access to benzodithioles 2 and benzothiaselenoles 6 in the presence of Cs2CO3. In the absence of S8 or Se, the reaction affords dibenzodithiocines 7 via two consecutive C(sp2)-S Ullmann couplings.