Exceptional Photocatalytic Activities of rGO Modified (B,N) Co-Doped WO3 , Coupled with CdSe QDs for One Photon Z-Scheme System: A Joint Experimental and DFT Study

Conformal and conductive biofilm-bridged artificial Z-scheme system for visible light-driven overall water splitting

Semi-artificial Z-scheme systems offer promising potential toward efficient solar-to-chemical conversion, yet sustainable and stable designs are currently lacking. Here, we developed a sustainable hybrid Z-scheme system capable for visible light-driven overall water splitting by integrating the durability of inorganic photocatalysts with the interfacial adhesion and regenerative property of bacterial biofilms. The Z-scheme configuration is fabricated by drop casting a mixture of photocatalysts onto a glass plate, followed by the growth of biofilms for conformal conductive paste through oxidative polymerization of pyrrole molecules. Notably, the system exhibited scalability indicated by consistent catalytic efficiency across various sheet areas, resistance observed by remarkable maintaining of photocatalytic efficiency across a range of background pressures, and high stability as evidenced by minimal decay of photocatalytic efficiency after 100-hour reaction. Our work thus provides a promising avenue toward sustainable and high-efficiency artificial photosynthesis, contributing to the broader goal of sustainable energy solutions.

Cu@CuOx/WO3 with photo-regulated singlet oxygen and oxygen adatoms generation for selective photocatalytic aromatic amines to imines

Photocatalysts can absorb light and activate molecular O2 under mild conditions, but the generation of unsuitable reactive oxygen species often limits their use in synthesizing fine chemicals. To address this issue, we disperse 1 wt% copper on tungsten trioxide (WO3) support to create an efficient catalyst for selective oxidative coupling of aromatic amines to imines under sunlight irradiation at room temperature. Copper consists of a metallic copper core and an oxide shell. Experimental and density functional theory calculations have confirmed that Cu2O is the primary activation site. Under λ < 475 nm, the light excites electrons of the valence bands in Cu2O and WO3, which activate O2 to superoxide radical •O2-. Then rapidly transforms into oxygen adatoms (•O) and oxygen anion radicals (•O-) species on the surface of Cu2O. Simultaneously, it is captured by holes in the WO3 valence band to generate singlet oxygen (1O2). •O bind to 1O2 promoting the coupling reaction of amines. When λ > 475 nm, intense light absorption due to the localized surface plasmon resonance excites numerous electrons in Cu to promote the oxidative coupling with the adsorbed O2. This study presents a promising approach towards the design of high-performance photocatalysts for solar energy conversion and environmentally-friendly oxidative organic synthesis.

Molecular modulation of interfaces in a Z-scheme van der Waals heterojunction for highly efficient photocatalytic CO2 reduction

The construction of van der Waals (vdW) heterojunctions is a key approach for efficient and stable photocatalysts, attracting marvellous attention due to their capacity to enhance interfacial charge separation/transfer and offer reactive sites. However, when a vdW heterojunction is made through an ex-situ assembly, electron transmission faces notable obstacles at the components interface due to the substantial spacing and potential barrier. Herein, we present a novel strategy to address this challenge via wet chemistry by synthesizing a functionalized graphene-modulated Z-scheme vdW heterojunction of zinc phthalocyanine/tungsten trioxide (xZnPc/yG-WO3). The functionalized G-modulation forms an electron "bridge" across the ZnPc/WO3 interface to improve electron transfer, get rid of barriers, and ultimately facilitating the optimal transfer of excited photoelectrons from WO3 to ZnPc. The Zn2+ in ZnPc picks up these excited photoelectrons, turning CO2 into CO/CH4 (42/22 μmol.g-1.h-1) to deliver 17-times better efficiency than pure WO3. Therefore, the introduction of a molecular "bridge" as a means to establish an electron transfer conduit represents an innovative approach to fabricate efficient photocatalysts designed for the conversion of CO2 into valued yields.

Charge transfer in TiO2-based photocatalysis: fundamental mechanisms to material strategies

Semiconductor-based photocatalysis has attracted significant interest due to its capacity to directly exploit solar energy and generate solar fuels, including water splitting, CO2 reduction, pollutant degradation, and bacterial inactivation. However, achieving the maximum efficiency in photocatalytic processes remains a challenge owing to the speedy recombination of electron-hole pairs and the limited use of light. Therefore, significant endeavours have been devoted to addressing these issues. Specifically, well-designed heterojunction photocatalysts have been demonstrated to exhibit enhanced photocatalytic activity through the physical distancing of electron-hole pairs generated during the photocatalytic process. In this review, we provide a systematic discussion ranging from fundamental mechanisms to material strategies, focusing on TiO2-based heterojunction photocatalysts. Current efforts are focused on developing heterojunction photocatalysts based on TiO2 for a variety of photocatalytic applications, and these projects are explained and assessed. Finally, we offer a concise summary of the main insights and challenges in the utilization of TiO2-based heterojunction photocatalysts for photocatalysis. We expect that this review will serve as a valuable resource to improve the efficiency of TiO2-based heterojunctions for energy generation and environmental remediation.

Progress and Perspectives on Promising Covalent-Organic Frameworks (COFs) Materials for Energy Storage Capacity

In recent years, a new class of highly crystalline advanced permeable materials covalent-organic frameworks (COFs) have garnered a great deal of attention thanks to their remarkable properties, such as their large surface area, highly ordered pores and channels, and controllable crystalline structures. The lower physical stability and electrical conductivity, however, prevent them from being widely used in applications like photocatalytic activities and innovative energy storage and conversion devices. For this reason, many studies have focused on finding ways to improve upon these interesting materials while also minimizing their drawbacks. This review article begins with a brief introduction to the history and major milestones of COFs development before moving on to a comprehensive exploration of the various synthesis methods and recent successes and signposts of their potential applications in carbon dioxide (CO2 ) sequestration, supercapacitors (SCs), lithium-ion batteries (LIBs), and hydrogen production (H2 -energy). In conclusion, the difficulties and potential of future developing with highly efficient COFs ideas for photocatalytic as well as electrochemical energy storage applications are highlighted.

Photoelectron "Bridge" in Van Der Waals Heterojunction for Enhanced Photocatalytic CO2 Conversion Under Visible Light

Constructing Van der Waals heterojunction is a crucial strategy to achieve excellent photocatalytic activity. However, in most Van der Waals heterojunctions synthesized by ex situ assembly, electron transfer encounters huge hindrances at the interface between the two components due to the large spacing and potential barrier. Herein, a phosphate-bridged Van der Waals heterojunction of cobalt phthalocyanine (CoPc)/tungsten disulfide (WS2 ) bridged by phosphate (xCoPc-nPO4 - -WS2 ) is designed and prepared by the traditional wet chemistry method. By introducing a small phosphate molecule into the interface of CoPc and WS2 , creates an electron "bridge", resulting in a compact combination and eliminating the space barrier. Therefore, the phosphate (PO4 - ) bridge can serve as an efficient electron transfer channel in heterojunction and can efficiently transmit photoelectrons from WS2 to CoPc under excited states. These excited photoelectrons are captured by the catalytic central Co2+ in CoPc and subsequently convert CO2 molecules into CO and CH4 products, achieving 17-fold enhancement on the 3CoPc-0.6PO4 - -WS2 sample compared to that of pure WS2 . Introducing a small molecule "bridge" to create an electron transfer channel provides a new perspective in designing efficient photocatalysts for photocatalytic CO2 reduction into valuable products.

g-C3N4-Co3O4 Z-Scheme Junction with Green-Synthesized ZnO Photocatalyst for Efficient Degradation of Methylene Blue in Aqueous Solution

A simple wet chemical ultrasonic-assisted synthesis method was employed to prepare visible light-driven g-C₃N₄-ZnO-Co₃O₄ (GZC) heterojunction photocatalysts. X-ray diffraction (XRD), scanning electromicroscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), ultraviolet (UV), and electrochemical impedance spectroscopy (EIS) are used to characterize the prepared catalysts. XRD confirms the homogenous phase formation of g-C₃N₄, ZnO, and Co₃O₄, and the heterogeneous phase for the composites. The synthesized ZnO and Co₃O₄ by using cellulose as a template show a rod-like morphology. The specific surface area of the catalytic samples increases due to the cellulose template. The measurements of the energy band gap of a g-C₃N₄-ZnO-Co₃O₄ composite showed red-shifted optical absorption to the visible range. The photoluminescence (PL) intensity decreases due to the formation of heterojunction. The PL quenching and EIS result shows that the reduction of the recombination rate and interfacial resistance result in charge carrier kinetic improvement in the catalyst. The photocatalytic performance in the degradation of MB dye of the GZC-3 composite was about 8.2-, 3.3-, and 2.5-fold more than that of the g-C₃N₄, g-C₃N₄-ZnO, and g-C₃N₄-Co₃O₄ samples. The Mott-Schottky plots of the flat band edge position of g-C₃N₄, ZnO, Co₃O₄, and Z-scheme g-C₃N₄-ZnO-Co₃O₄ photocatalysts may be created. Based on the stability experiment, GZC-3 shows greater photocatalytic activity after four recycling cycles. As a result, the GZC composite is environmentally friendly and efficient photocatalyst and has the potential to consider in the treatment of dye-contaminated wastewater.

Controllable CO2 Reduction or Hydrocarbon Oxidation Driven by Entire Solar via Silver Quantum Dots Direct Photocatalysis

The current solar-chemical-industry based on semiconductor photocatalyst is impractical. Metal catalysts are extensively employed in thermal- and electro-catalysis industries, but unsuitable for direct-driven photocatalysis. Herein, silver quantum dots (Ag-QDs) are synthesized on support via an in situ photoreduction method, and in situ photocatalysis temperature programmed dynamics chemisorption desorption analyses are designed to demonstrate that Ag-QDs should be the actual photocatalytic sites. The surface plasmon resonance of Ag-QDs could harvests entire visible solar, and the plasmon-driven charge-transfer exhibits opposite directions at the interface when supports are different. Consequently, Ag-QDs could be alternatively regulated as oxidation or reduction active centers. Furthermore, Ag-QDs excite electron tunneling transfer with adsorbate, which does not generate high-energy free-radical intermediates. As a result, the efficiencies of hydrocarbon photooxidation and CO₂ photoreduction are improved in several orders of magnitude. Evidently, the Ag-QDs direct photocatalytic technology greatly promotes solar-chemical-industry applications.

Low-temperature direct electrochemical splitting of H2S

Hydrogen is considered one of the most promising decarbonized fuels. However, its applicability is limited due to the ecological constraints of its production. Hydrogen sulfide (H2S) is widely available in oil and gas reservoirs and has the potential of becoming an energetically favorable source of hydrogen. Nevertheless, its electrochemical separation into H2 and elemental sulfur has not been successfully achieved at the industrial scale, due to sulfur poisoning of the electrodes at the sulfur oxidation half-reaction. This review highlights the progress of the direct electrolytic separation of H2S below the sulfur dew point, where the sulfur poisoning effect becomes more prominent. The article discusses the different technologies and approaches explored to improve the energy efficiency and stability of H2S electrolytic systems, including the recent use of nanostructured electrodes and novel sulfur solvents as electrolytes.

CdSe-Decorated Flowerlike CaMoO4 Microspheres with Enhanced Hydrogen Production Activity

Photocatalytic hydrogen production technology from water is a more effective and promising method to solve energy and environmental crises. In this work, flowerlike CaMoO₄ microspheres were successfully synthesized by an ultrasonic precipitation method and modified with variable concentrations of CdSe NCs. CdSe/CaMoO₄ microspheres showed increased light absorption ability, larger relative surface area, lower electrochemical impedance, and longer fluorescence lifetime. The photocatalytic hydrogen production rate of CdSe/CaMoO₄ microspheres could reach up to 10 162.33 μmol g^-1 h^-1. The constructed type-I heterostructure improved the separation of photogenerated electrons and inhibited the rapid recombination of photogenerated electrons and holes, thus enhancing the photocatalytic hydrogen production performance. CdSe/CaMoO₄ with high hydrogen production activity would be an efficient photocatalyst for hydrogen production applications.

Effect of nanodiamond particles on the structure, mechanical, and thermal properties of polymer embedded ND/PMMA composites

Nanodiamonds (NDs), the allotropic carbon nanomaterials with nanosize, durable inert core, adjustable surface morphology, high thermal constancy, and super mechanical performances, possess the characteristics of promising reinforcement materials for various technological applications. However, ND particles hold a vigorous propensity to aggregate in liquid media, obstructing their implementation in mechanical and thermal sciences. This aggregation is caused by high surface to volume ratio. By reducing the surface energy and lowering cluster formation, the mechanical and thermal properties of NDs can be polished. Herein, we report on the covalent functionalization of NDs with amine moiety through ball milling method. Their dispersion was checked in ethanol and polymethyl methacrylate (PMMA polymer) against nonfunctionalized NDs. The dispersive behavior showed that ball mill functionalized NDs produced preferably stable aqueous dispersions in ethanol media. Furthermore, 0.1, 0.2, and 0.4 wt% ND/PMMA composites were synthesized, and their mechanical and thermal behaviors were studied in terms of hardness, compression, Young`s modulus, flexural strength, tensile strength, and thermogravimetric analysis (TGA). Results revealed that the composites containing 0.2 wt% functionalized ND loaded with PMMA matrix showed outstanding mechanical and thermal performances indicating that 0.2 wt% is the optimum amount for achieving excellent outcomes.

Preparation and comparative evaluation of PVC/PbO and PVC/PbO/graphite based conductive nanocomposites

Two series, A and B, of PVC based nanocomposite polymer membranes (nCPMs) were prepared using PbO only and PbO/graphite mixture as a filler by solution casting method. Seven samples with varying compositions (5–35%) of filler particles were prepared for each series and were compared by thickness measurements, porosity, water uptake, swelling degree, ionic conductivity, ion exchange capacity (IEC), membrane potential and transport number. The maximum values for these characteristics were observed as 0.402 mm, 0.77, 141.3%, 0.11, 0.0033 Scm−1, 8.6 milli-eq.g−1, 0.19 V and 0.01391 for series-A composites whereas that of 0.367 mm, 0.83, 63.4%, 0.019, 0.00981 Scm−1, 5.21 milli-eq.g−1, 0.13 V and 0.0108 for series-B nCPMs respectively. The SEM images of membranes showed greater voids produced in the series-B compared to series-A composites. The maximum Ionic conductivity, IEC, membrane potential and transport number were observed for membrane with 25% PbO/graphite, 20% PbO and 35% PbO particles respectively.

Designing a Redox Heterojunction for Photocatalytic "Overall Nitrogen Fixation" under Mild Conditions

Ammonia and nitrates are the most fundamental and significant raw ingredients in human society. Till now, industrial synthetic ammonia by Haber-Bosch process and industrial synthetic nitrates by the Ostwald process have encountered increasingly serious challenges, i.e., high energy consumption, high cost, and environment-harmful gas emissions. Therefore, developing alternative approaches to achieve nitrogen fixation to overcome the inherent deficiencies of the well-established Haber-Bosch and Ostwald processes has fascinated scientists for many years, especially the simultaneous formation of ammonia and nitrate directly from N₂ molecules, which has been rarely studied. Herein, a heterojunction-based photocatalytic system is designed to successfully achieve "overall nitrogen fixation," a sustainable and simultaneous conversion of N₂ molecules into ammonia and nitrate products under mild conditions. In this heterojunction, interfacial charge redistribution (ICR) promotes selective accumulations of photogenerated electrons and holes in the CdS and WO₃ components. As a result, N₂ molecules can be activated and reduced to ammonia products with yields of 35.8 µmol h^-1 g^-1 by a multi-electron process, and synchronously oxidized into nitrate products with yields of 14.2 µmol h^-1 g^-1 by a hole-induced oxidation coupling process. This work provides a novel insight and promising approach to realize artificial nitrogen fixation under mild condition.

Spectroscopic characterization of biosynthesized lead oxide (PbO) nanoparticles and their applications in PVC/graphite-PbO nanocomposites

Extract of Hibiscus rosa-sinensis plants was used for the green synthesis of PbO nanoparticles. The prepared nanoparticles were conformed with the help of SEM, X-ray diffraction, FTIR and UV-visible spectroscopy. The prepared PbO nanoparticles were dispersed in deionized water and mixed with graphite to get graphite-PbO (G-PbO) filler. Seven different nanocomposite membranes with variable compositions (5, 10, 15, 20, 25, 30 and 35%) of PVC/G-PbO were prepared in tetrahydrofuran (THF) solvent using solution casting method. Different physiochemical parameters of the nanocomposite membranes studied included morphology, porosity, density, water uptake, swelling degree, electrical conductivity and proton adsorption capacity. All these physiochemical parameters were compared with pure PVC membranes available in literature. It was found that the addition of G-PbO filler in PVC polymer improved all the physiochemical properties except density. PVC/G-PbO membranes showed 42.65 times more electrical conductivity and 5.90 times more ion adsorption capacities compare to pure PVC membranes.

Synthesis of mixed-valence Cu phthalocyanine/graphene/g-C3N4 ultrathin heterojunctions as efficient photocatalysts for CO2 reduction

Mixed-valence Cu phthalocyanine/graphene/g-C3N4 ultrathin heterojunctions for efficient photocatalytic CO2 reduction.