CoP/Fe-Co9 S8 for Highly Efficient Overall Water Splitting with Surface Reconstruction and Self-Termination

Fabricating Co9S8@NiWO4 Electrode toward Record Area Capacitance of 18.8 F cm-2 for High Performance Supercapacitor

Realizing ultrahigh area capacitance based on suitable electrodes is a challenge for supercapacitors. In this work, an electrode is designed consisting of Co9S8 nanotubes and NiWO4 nanoparticles (named Co9S8@NiWO4) and fabricated by a hydrothermal process. The Co9S8@NiWO4 electrode realizes a record area capacitance of 18.8 F cm-2 at a current density of 5 mA cm-2 among the reports in the literature. The corresponding asymmetric supercapacitor shows high energy density of 0.48 mW h cm-2 at 2.42 mW cm-2 and superior cyclic stability of 79.2% retention over 7000 cycles at 10 mA cm-2. The great promotion in performance of Co9S8@NiWO4 electrode is synergistically attributed to high intrinsic theoretical capacitances of compounds, abundance polyvalent states, improved conductivity, and increases in reaction sites and rate of the electrode. This work provides a new route for designing highly efficient electrode for developing supercapacitors with high performance in practical applications.

Co-doped NiFe carbonate hydroxide hydrate nanosheets with edge effect constructed from spent lithium-ion battery ternary cathodes for oxygen evolution reaction

The recycling of spent lithium-ion batteries (LIBs) has received increasing attention for environment and resource reclamation. Converting LIBs wastes into high-efficiency catalysts is a win-win strategy for realizing resource reclamation and addressing sustainable energy challenges. Herein, we developed a simple method to upcycle spent-LIBs cathode powder into Co-doped NiFe carbonate hydroxide hydrate (Co/NFCH-FF) as a low-cost and efficient oxygen evolution reaction (OER) electrocatalyst. The optimized Co/NFCH-FF electrode appears very competitive OER performances with low overpotentials of 201 and 249 mV at 10 and 100 mA cm-2, respectively, a small Tafel slope of 48.4 mV dec-1, and a high long-term stability. Moreover, we reveal that the existence of Co atoms leads to the formation of a crystalline/amorphous (c/a) interface at the Co/NFCH nanosheet edge, inducing the nanosheets possess a unique edge effect to enhance electric fields and accumulate hydroxide ions (OH-) at the edge during the OER process. Benefiting from edge effect, Co/NFCH-FF shows outstanding intrinsic activity. Furthermore, Co atoms as dopants stabilize the electronic structure of Co/NFCH-FF, enabling Co/NFCH-FF to exhibit excellent catalytic stability. This work provides an effective strategy for converting the end-life LIBs to high-performance multicomponent OER electrocatalysts and proposes new insights into the mechanism of enhanced catalytic activity of Co/NFCH.

Fe,Co co-implanted dendritic CeO2/CeF3 heterostructure@MXene nanocomposites as structurally stable electrocatalysts with ultralow overpotential for the alkaline oxygen evolution reaction

Exploring low-cost, high-activity, and structurally stable nonprecious metal electrocatalysts for sluggish oxygen evolution reaction (OER) is paramount for water electrolysis. Herein, we successfully prepare a novel Fe,Co-CeO2/CeF3@MXene heterostructure with Fe-Co dual active sites and oxygen vacancies for alkaline OER using an energy-free consumption co-deposition method. Impressively, Fe,Co-CeO2/CeF3@MXene achieves an ultralow overpotential of 192 mV and a long-term stability of 110 h at 10 mA cm-2 without structural changes, thereby outperforming the commercial IrO2 (345 mV). In addition, Fe,Co-CeO2/CeF3@MXene exhibits much superior activity (271 mV) and durability to IrO2 (385 mV) in the real seawater OER. Wind- and solar energy-assisted water electrolysis devices show their promising prospects for sustainable green hydrogen production. Characterization techniques and theoretical calculations reveal that the Fe,Co co-implanted CeO2/CeF3 heterostructure effectively degrades the energy barrier of the OER and optimizes the adsorption strength of *OH, *O, and *OOH intermediates. It exhibits the dual coupling mechanism of the adsorbed evolution and lattice oxygen mechanisms, which synergistically improves the OER performance. This work provides a facile and efficacious strategy for synthesizing a new class of heterostructures to achieve significant enhancement in the activity and stability of OER catalysts.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Surface Reconstruction Facilitated by Fluorine Migration and Bimetallic Center in NiCo Bimetallic Fluoride Toward Oxygen Evolution Reaction

Oxygen evolution reaction (OER) is a critical anodic reaction of electrochemical water splitting, developing a high-efficiency electrocatalyst is essential. Transition metal-based catalysts are much more cost-effective if comparable activities can be achieved. Among them, fluorides are rarely reported due to their low aqueous stability of coordination and low electric conductivity. Herein, a NiCo bimetallic fluoride with good crystallinity is designed and constructed, and significantly enhanced catalytic activity and conductivity are observed. The inevitable oxidation of transition metal ions at high potential and the dissociation of F- are attributed to the low aqueous stability of coordination. The theoretical researches predicte that transition metal fluorides should have a strong tendency to electrochemical reconstruction. Therefore, based on the observations on their electrochemical behavior, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, and bode plots, it is further demonstrated that surface reconstruction occurred during the electrochemical process, meanwhile a significant increase of electrochemically active area, which is created by F migration, are also directly observed. Additionally, DFT calculation results show that the electronic structure of the catalysts is modulated by the bimetallic centers, and this reconstruction helps optimizing the adsorption energy of oxygen-containing species and improves OER activity.

MnOxHy-modified CoMoP/NF nanosheet arrays as hydrogen evolution reaction and oxygen evolution reaction bifunctional catalysts under alkaline conditions

It is widely acknowledged that interface engineering strategies can significantly enhance the activity of catalysts. In this study, we developed a CoMoP nanoarray directly grown in situ on a nickel foam (NF) substrate, with the interface structure formed through the electrodeposition of MnOxHy. The resulting heterostructure MnOxHy/CoMoP/NF exhibited remarkable hydrogen evolution reaction (HER) activity, achieving overpotentials as low as 61 and 138 mV at 10 and 100 mA cm-2, respectively. Moreover, MnOxHy/CoMoP/NF demonstrated efficient oxygen evolution reaction (OER) activity with an overpotential of 330 mV at 100 mA cm-2. Remarkably, MnOxHy/CoMoP/NF maintained its catalytic properties and structural integrity even after working continuously for 20 h facilitating the HER at 10 mA cm-2 and the OER at 100 mA cm-2. The Tafel slopes of the HER and OER were determined to be as small as 14 and 55 mV dec-1, respectively, confirming that the coupled interface conferred fast reaction kinetics on the catalyst. When applied in overall water splitting, MnOxHy/CoMoP/NF delivered a voltage of 1.91 V at 100 mA cm-2 with excellent stability. This study demonstrated the feasibility of utilizing a simple electrodeposition technique to fabricate a heterogeneous structure with bifunctional catalytic activity, establishing a solid foundation for diverse industrial applications.

Dual Electronic Modulations on NiFeV Hydroxide@FeOx Boost Electrochemical Overall Water Splitting

Nickel-iron based hydroxides have been proven to be excellent oxygen evolution reaction (OER) electrocatalysts, whereas they are inactive toward hydrogen evolution reaction (HER), which severely limits their large-scale applications in electrochemical water splitting. Herein, a heterostructure consisted of NiFeV hydroxide and iron oxide supported on iron foam (NiFeV@FeOx /IF) has been designed as a highly efficient bifunctional (OER and HER) electrocatalyst. The V doping and intimate contact between NiFeV hydroxide and FeOx not only improve the entire electrical conductivity of the catalyst but also afford more high-valence Ni which serves as active sites for OER. Meanwhile, the introduction of V and FeOx reduces the electron density on lattice oxygen, which greatly facilitates desorption of Hads . All of these endow the NiFeV@FeOx /IF with exceptionally low overpotentials of 218 and 105 mV to achieve a current density of 100 mA cm-2 for OER and HER, respectively. More impressively, the electrolyzer requires an ultra-low cell voltage of 1.57 V to achieve 100 mA cm-2 and displays superior electrochemical stability for 180 h, which outperforms commercial RuO2 ||Pt/C and most of the representative catalysts reported to date. This work provides a unique route for developing high-efficiency electrocatalyst for overall water splitting.

Surface and near-surface engineering design of transition metal catalysts for promoting water splitting

Transition metal catalysts are widely used in the field of hydrogen production via water electrolysis. The surface state and near-surface environment of the catalysts greatly affect the efficiency of hydrogen production. Therefore, the rational design of surface engineering and near-surface engineering of transition metal catalysts can significantly improve the performance of water electrolysis. This review systematically introduces surface engineering strategies, including heteroatom doping, vacancy engineering, strain regulation, heterojunction effect, and surface reconstruction. These strategies optimize the surface electronic structure of the catalysts, expose more active sites, and promote the formation of highly active species, ultimately enhancing water electrolysis performance. Furthermore, near-surface engineering strategies, such as surface wettability, three-dimensional structure, high-curvature structure, external field assistance, and extra ion addition, are thoroughly discussed. These strategies expedite the mass transfer of reactants and gas products, improve the local chemical environment near the catalyst surface, and contribute toward achieving an industrial-level current density for overall water splitting. Finally, the key challenges faced by surface engineering and near-surface engineering of transition metal catalysts are highlighted and potential solutions are proposed. This review offers essential guidelines for the design and development of efficient transition metal catalysts for water electrolysis.

Constructing Molybdenum Phosphide@Cobalt Phosphide Heterostructure Nanoarrays on Nickel Foam as a Bifunctional Electrocatalyst for Enhanced Overall Water Splitting

The construction of multi-level heterostructure materials is an effective way to further the catalytic activity of catalysts. Here, we assembled self-supporting MoS₂@Co precursor nanoarrays on the support of nickel foam by coupling the hydrothermal method and electrostatic adsorption method, followed by a low-temperature phosphating strategy to obtain Mo₄P₃@CoP/NF electrode materials. The construction of the Mo₄P₃@CoP heterojunction can lead to electron transfer from the Mo₄P₃ phase to the CoP phase at the phase interface region, thereby optimizing the charge structure of the active sites. Not only that, the introduction of Mo₄P₃ will make water molecules preferentially adsorb on its surface, which will help to reduce the water molecule decomposition energy barrier of the Mo₄P₃@CoP heterojunction. Subsequently, H* overflowed to the surface of CoP to generate H₂ molecules, which finally showed a lower water molecule decomposition energy barrier and better intermediate adsorption energy. Based on this, the material shows excellent HER/OER dual-functional catalytic performance under alkaline conditions. It only needs 72 mV and 238 mV to reach 10 mA/cm² for HER and OER, respectively. Meanwhile, in a two-electrode system, only 1.54 V is needed to reach 10 mA/cm², which is even better than the commercial RuO₂/NF||Pt/C/NF electrode pair. In addition, the unique self-supporting structure design ensures unimpeded electron transmission between the loaded nanoarray and the conductive substrate. The loose porous surface design is not only conducive to the full exposure of more catalytic sites on the surface but also facilitates the smooth escape of gas after production so as to improve the utilization rate of active sites. This work has important guiding significance for the design and development of high-performance bifunctional electrolytic water catalysts.