Oil dispersion and aggregation with suspended particles in a wave tank

Suspended particulate matter (SPM) in marine environments plays an important role in determining the fate of spilled oil via the generation of oil-particle aggregates (OPAs). A series of mesoscale wave tank experiments and sedimentation tests were conducted to fill the knowledge gap on how the turbulent mixing, temperature, and oil type affect the dispersion of spilled oil and properties of OPAs. Generally, the oil dispersing efficiency was significantly enhanced by high wave energy, which also led to effective oil sinking, large size of OPAs and wide distribution of trapped oil. Nonlinear fitting results indicated that the oil sinking efficiency followed an exponential growth over time. The effect of temperature on oil dispersion and formation of OPAs is primarily attributed to its influence on oil viscosity and interfacial tension. Viscous oils are more likely to interact with particles above 25 °C. However, below 20 °C, a specific oil viscosity that will bring about the maximum OPAs exists. Excessive oil viscosity will lead to a weak binding between oil and SPM and a centralized distribution of trapped oil. Furthermore, spilled oil with a high asphaltene can interact more effectively with particles. Our finding suggested that early prevention of offshore oil sinking is key in summer.

Assessment of chemical dispersant effectiveness in a wave tank under regular non-breaking and breaking wave conditions

Current chemical dispersant effectiveness tests for product selection are commonly performed with bench-scale testing apparatus. However, for the assessment of oil dispersant effectiveness under real sea state conditions, test protocols are required to have hydrodynamic conditions closer to the natural environment, including transport and dilution effects. To achieve this goal, Fisheries and Oceans Canada and the US Environmental Protection Agency (EPA) designed and constructed a wave tank system to study chemical dispersant effectiveness under controlled mixing energy conditions (regular non-breaking, spilling breaking, and plunging breaking waves). Quantification of oil dispersant effectiveness was based on observed changes in dispersed oil concentrations and oil-droplet size distribution. The study results quantitatively demonstrated that total dispersed oil concentration and breakup kinetics of oil droplets in the water column were strongly dependent on the presence of chemical dispersants and the influence of breaking waves. These data on the effectiveness of dispersants as a function of sea state will have significant implications in the drafting of future operational guidelines for dispersant use at sea.