An environmental survey in chrysotile asbestos milling processes in India

Evaluation of tremolite asbestos exposures associated with the use of commercial products

Tremolite is a noncommercial form of amphibole mineral that is present in some chrysotile, talc, and vermiculite deposits. Inhalation of asbestiform tremolite is suspected to have caused or contributed to an increased incidence of mesothelioma in certain mining settings; however, very little is known about the magnitude of tremolite exposure that occurred at these locations, and even less is known regarding tremolite exposures that might have occurred during consumer use of chrysotile, talc, and vermiculite containing products. The purpose of this analysis is to evaluate the exposure-response relationship for tremolite asbestos and mesothelioma in high exposure settings (mining) and to develop estimates of tremolite asbestos exposure for various product use scenarios. Our interpretation of the tremolite asbestos exposure metrics reported for the Thetford chrysotile mines and the Libby vermiculite deposits suggests a lowest-observed-adverse-effect level (LOAEL) for mesothelioma of 35-73 f/cc-year. Using measured and estimated airborne tremolite asbestos concentrations for simulated and actual product use, we conservatively estimated the following cumulative tremolite asbestos exposures: career auto mechanic: 0.028 f/cc-year; non-occupational use of joint compound: 0.0006 f/cc-year; non-occupational use of vermiculite-containing gardening products: 0.034 f/cc-year; home-owner removal of Zonolite insulation: 0.0002 f/cc-year. While the estimated consumer tremolite exposures are far below the tremolite LOAELs derived herein, this analysis examines only a few of the hundreds of chrysotile- and talc-containing products.

Chrysotile asbestos exposure in the manufacturing of thermal insulating boards

Exposure to asbestos fibers has been extensively studied in milling, mining of asbestos fibers, and in industries manufacturing asbestos-cement sheets, pipes, etc. However, very few studies have been reported in asbestos textiles, brake lining workers, and insulation products. In the present investigation, chrysotile exposure monitoring was carried out in a small thermal insulating boards manufacturing facility. Twenty-eight samples were analyzed from various locations like feeding of raw materials, weighing, pressing, machine grinding, and hand finishing of final products. Twenty-five percent of the samples were found to be above ACGIH TLV of 0.1 fibers per milliliter. However, mean fiber concentrations were found to be lower than 0.1 fibers per milliliter, except for the process of feeding of raw materials where the mean fiber concentration was 0.1087+/-0.0631 fibers per milliliter.

Monitoring and identification of airborne asbestos in unorganized sectors, India

Rajasthan state in India is credited to cater more than 90% of total production of asbestos in this country, of which around 60% is processed there in unorganized sectors including milling and manufacturing of asbestos-based products. Unorganized asbestos units particularly mills showed unhealthy occupational conditions, therefore industrial hygiene study was carried out focusing on the prevalence of asbestos fibres in air at work zone area of asbestos milling units. Fibre levels were in the range of 2.00-5.09f/cm(3) and 4.07-15.60f/cm(3) in unorganized asbestos mills of Rajasthan located at Beawer and Deogarh districts, respectively. Like asbestos concentration, fibre type and length are also vital factors in the health risk assessment of industrial workers. Phase contrast and polarized light microscopic study of asbestos fibres showed their amphibole nature registering about 90% as tremolite and rest as anthophyllite. Fibre length measured micrometrically were sub-grouped in <10microm, 11-20microm, 21-30microm and >30microm. About 30-40% fibres belonged to sub-group <10microm. It is concluded that unorganized asbestos mills bear poor industrial unhygienic conditions reflected specifically from their manyfold higher fibre concentrations than the Indian and International standards. Poor industrial unhygienic conditions are attributable to obsolete milling technology, lack of pollution control devices and escape from regulatory control.

Environmental health survey in asbestos cement sheets manufacturing industry

About 673 small-scale asbestos mining and milling facilities and 33 large - scale asbestos manufacturing plants, (17 asbestos-cement product manufacturing plants and 16 other than asbestos-cement product plants) are situated in India. The present study reveals the exposure of commercial asbestos (chrysotile) in the occupational as well as ambient air environment of the asbestos-cement (AC) sheets industry using membrane filter method of Bureau of Indian Standards (BIS). The fibre concentrations in 15 samples collected in the occupational environment at ingredient feeding site, sheet-producing site, fibre godown were 0.079, 0.057 and 0.078 f/cc, respectively and in five samples from surrounding ambient air at factory gate resulted fibre concentration of 0.071 f/cc. All the samples have shown fibre concentration lower than the threshold limit values (TLVs) prescribed by BIS. Morphological analysis of samples, further under phase contrast and polarized microscopy indicates the presence of chrysotile asbestos, which acts as carcinogen as well as co-carcinogen. A clinical examination of exposed subjects reveals that there was no case of clubbing, crepitation, ronchi and dyspnea on exertion; however, obstruction and restriction were 10.9 per cent and 25 per cent in exposed subjects, respectively while in control there were 12 per cent and 28 per cent, respectively. The study revealed that chrysotile asbestos is emitted in the occupational as well as ambient environment that may cause adverse health impact.

Asbestosis in an asbestos composite mill at Mumbai: a prevalence study

BACKGROUND

Of an estimated 100,000 workers exposed to asbestos in India, less than 30 have been compensated. The reasons for such a small number are: refusal by management sponsored studies to grant medical certifications to workers suffering from occupational diseases, lack of training for doctors in diagnosis of occupational lung diseases, deliberate misdiagnosis by doctors of asbestosis as either chronic bronchitis or tuberculosis and the inherent class bias of middle class doctors against workers. The aim of the study was to identify workers suffering from Asbestosis (parenchymal and pleural non-malignant disease) among the permanent workers of the Hindustan Composites Factory and assess their disability and medically certify them, whereupon they could avail of their basic rights to obtain compensation and proper treatment.

METHODS

The study was conducted by the Occupational Health and Safety Centre and the Workers' Union. Asbestosis was diagnosed if they had an occupational history of asbestos exposure for at least 15 years and showed typical radiographic findings.

RESULTS

Of 232 workers in the factory, 181 participated in the survey. 22% of them had asbestosis. All the asbestos affected workers had at least 20 years of exposure. 7% had rhonchi, 34% had late basal inspiratory rates, 82% had more than 80% of Forced Expiratory Volume in the first second (FEV1)/Forced Vital capacity (FVC) ratio and 66% had FVC less than 80% of the predicted value. On radiology 7% had only pleural disease, 10% had both pleural and parenchymal disease and 82% had only parenchymal disease. The association of pleural disease with chest pain was statistically significant.

CONCLUSION

We found the prevalence of asbestosis among exposed workers to be less than that anticipated for the number of years of exposure due to "Healthy Worker Effect". We suggest that all affected asbestos workers (including those who have been forced to leave) in India be medically certified and compensated. We also recommend better control of asbestos use in India. We also implore the management to provide all information about the work process and its hazards, conduct medical checkups as mandated by law and give the medical records to the workers.

Occupational asbestos exposure and predictable asbestos-related diseases in India

BACKGROUND

India imports nearly 100,000 metric tons of asbestos per year, and small-scale asbestos (chrysotile and tremolite) mining and milling contributes nearly 5%-10% of the total national usage. The industry is relatively young, having started in the 1950s and 1960s.

METHODS

Surveys of asbestos-exposed workers have identified significant occupational exposures, early pleural and parenchymal changes on chest radiograph, and decrements in lung function.

RESULTS AND CONCLUSIONS

Based on knowledge of past and current exposures to asbestos in industry, we can predict a future occurrence of clinical asbestos-related diseases-pleural changes, pulmonary fibrosis, bronchogenic carcinoma, and diffuse malignant mesothelioma. These cases of asbestos related disease are expected to occur in asbestos exposed workers from mining, milling, and manufacturing as well as in those with secondary exposures to asbestos-containing materials, including construction and maintenance workers, users of asbestos-containing consumer products, and the occupants of asbestos-containing buildings.

Dust-induced interstitial lung disease in the tropics

Inhalation of dusts is an important cause of interstitial lung disease in the tropical countries such as India. While dusts of organic origin, such as the cotton dust causing byssinosis, generally cause bronchial or bronchiolar involvement and hypersensitivity pneumonitis, inorganic metallic dusts cause progressive pulmonary fibrosis. Silicosis, coal workers' pneumoconiosis, and asbestosis are the three most commonly recognized forms of pneumoconiotic pulmonary fibrosis. Pulmonary tuberculosis is an important complication seen in up to 50% of patients of silicosis in some reports from India. The presentation is generally chronic, although acute and accelerated forms of silicosis are known when the exposures are heavy. Breathlessness, dry cough, and general constitutional symptoms are commonly seen. Patients with silicotuberculosis or other forms of infection may also have significant expectoration, hemoptysis, fever, and rapid progression. Respiratory failure and chronic cor pulmonale occur in the later stages. The diagnosis is easily established if the occupational history is available. Dense nodular opacities on chest roentgenograms, which may be large in patients with massive pulmonary fibrosis, are characteristic. Emphysematous changes generally appear in advanced stages or in patients who smoke. Bronchoalveolar lavage and/or lung biopsy may occasionally be required to establish or exclude other causes of interstitial lung disease. Treatment is largely palliative, although a variety of drugs including corticosteroids and procedures such as whole lung lavage have been tried. None of these methods has yet been found successful in the treatment. Preventive safety steps, including removal of the patient from the site of exposure, are the only effective strategies to control disease progression.