Copper(II)‐Catalyzed Aerobic Oxidation of Amines: Divergent Reaction Pathways by Solvent Control to Imines and Nitriles

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Bromine-mediated strategy endows efficient electrochemical oxidation of amine to nitrile

Conventional methods for nitrile synthesis bring inherent environmental risks due to their reliance on oxidants and harsh reaction conditions. Meanwhile, direct electrooxidation of amines to nitriles suffers from low current density. In this study, we propose an innovative indirect electrooxidation strategy for nitrile formation, mediated by Br-/Br2, utilizing a highly efficient CoS2/CoS@Graphite Felt (GF) electrode. Notably, the anodic nitrile generation can be synergistically coupled with the cathodic hydrogen evolution reaction (HER). Through meticulous optimization of reaction parameters, we achieve an impressive 98% selectivity for octanenitrile at a current density of 60 mA cm-2 with a remarkable faradaic efficiency (FE) of 87%. Furthermore, our approach demonstrates excellent versatility, as we successfully evaluate both aliphatic and aromatic primary amines, highlighting its promising potential for practical applications in the field.

Green imine synthesis from amines using transition metal and micellar catalysis

Imines are a versatile class of chemicals with applications in pharmaceuticals and as synthetic intermediates. While imines are conventionally synthesized via aldehyde-amine condensation, their direct preparation from amines can avoid the need for the independent preparation of the aldehyde coupling partner and associated constraints with regard to aldehyde storage and purification. The direct preparation of imines from amines typically utilizes transition metal catalysis and is often well-aligned with green chemistry principles. This review provides a comprehensive overview of transition metal catalysed imine synthesis, with a particular focus on the copper-catalyzed oxidative coupling of amines. The emerging application of micellar catalysis for imine synthesis is also surveyed due to its potential to avoid the use of hazardous solvents and intensify these reactions through reduced catalyst loadings and locally increased reactant concentrations. Future directions relating to the confluence of these two areas are proposed towards the more sustainable preparation of imines.

Copper catalysed oxidative cascade deamination/cyclization of vinyl azide and benzylamine for the synthesis of 2,4,6-triarylpyridines

A highly efficient one-pot method for the synthesis of 2,4,6-triaryl pyridines has been developed via cascade deamination and annulation. Copper triflate and molecular iodine easily promoted the oxidative cyclization reaction of vinyl azide and benzylamine to access a wide variety of substituted pyridine substrates under an oxygen atmosphere. The presence of benzyl amine enables the cyclization process by providing the aryl functionality and the nitrogen source. Moreover, a broad range of substrates with good functional group tolerance, avoidance of external oxidants, excellent product yields, operational simplicity and mild conditions are the notable advantages of the present protocol.

Innovative green oxidation of amines to imines under atmospheric oxygen

In recent years, the development of environmentally benign molecular construction methods has been of great importance, and especially, resource recycling, high atomic efficiency, and low environmental impact are in high demand. From this point of view, attention has also been focused on the development of one-pot synthesis of pharmaceuticals and functional molecules. Imines are excellent synthetic intermediates of these useful molecules, and the environmentally friendly oxidative synthesis of imines from amines has been energetically developed using oxygen (or air), which is abundantly available on the Earth, as an oxidant. This review focuses on the latest innovative and green oxidation systems of amines to imines under atmospheric oxygen, and their application to one-pot/eco-friendly and sustainable synthesis of pharmaceuticals and functional molecules. In particular, catalytic systems that activate molecular oxygen are categorized and described in detail as transition metal catalytic systems, photoirradiated catalytic systems, and organocatalytic systems.

Highly Selective Electrocatalytic Oxidation of Amines to Nitriles Assisted by Water Oxidation on Metal-Doped α-Ni(OH)2

Selective oxidation to synthesize nitriles is critical for feedstock manufacturing in the chemical industry. Current strategies typically involve substitutions of alkyl halides with toxic cyanides or the use of strong oxidation reagents (oxygen or peroxide) under ammoxidation/oxidation conditions, setting considerable challenges in energy efficiency, sustainability, and production safety. Herein, we demonstrate a facile, green, and safe electrocatalytic route for selective oxidation of amines to nitriles under ambient conditions, assisted by the anodic water oxidation on metal-doped α-Ni(OH)₂ (a typical oxygen evolution reaction catalyst). By controlling the balance between co-adsorption of the amine molecule and hydroxyls on the catalyst surface, we demonstrate that Mn doping significantly promotes the subsequent chemical oxidation of amines, resulting in Faradaic efficiencies of 96% for nitriles under ≥99% conversion. This anodic oxidation is further coupled with cathodic hydrogen evolution for overall atomic economy and additional green energy production.

Electrochemical Dehydrogenation Pathways of Amines to Nitriles on NiOOH

Nitriles are highly important synthetic intermediates with applications in a wide variety of organic reactions including production of pharmaceuticals, fine chemicals, and agricultural chemicals. Thus, developing effective green routes to oxidize amines to nitriles is of great interest. One promising method to achieve the oxidation of primary amines to nitriles is through electrochemical oxidation on NiOOH electrodes. This reaction has long been thought to occur through an indirect mechanism consisting of a series of potential independent hydrogen atom transfer steps to catalytic Ni³⁺ sites in NiOOH, which reduces NiOOH to Ni(OH)₂. The role of the applied potential in this mechanism is simply to regenerate NiOOH by oxidizing Ni(OH)₂. In this work, we demonstrate that a second, potential-dependent pathway recently found to apply to alcohol and aldehyde oxidation on NiOOH and consisting of potential-dependent hydride transfer to Ni⁴⁺ sites is the dominant pathway for the oxidation of amines using propylamine and benzylamine as model systems. After qualitatively and quantitatively examining the contributions of indirect and potential-dependent oxidation pathways to amine oxidation on NiOOH, we also examine the effect the amine concentration, solution pH, applied bias, and deuterium substitution have on the two pathways, further clarifying their mechanisms and exploring what factors control their rate. This work provides a comprehensive understanding of the mechanism of primary amine oxidation on NiOOH.

Highly Efficient Oxidative Cyanation of Aldehydes to Nitriles over Se,S,N-tri-Doped Hierarchically Porous Carbon Nanosheets

Oxidative cyanation of aldehydes provides a promising strategy for the cyanide-free synthesis of organic nitriles. Design of robust and cost-effective catalysts is the key for this route. Herein, we designed a series of Se,S,N-tri-doped carbon nanosheets with a hierarchical porous structure (denoted as Se,S,N-CNs-x, x represents the pyrolysis temperature). It was found that the obtained Se,S,N-CNs-1000 was very selective and efficient for oxidative cyanation of various aldehydes including those containing other oxidizable groups into the corresponding nitriles using ammonia as the nitrogen resource below 100 °C. Detailed investigations revealed that the excellent performance of Se,S,N-CNs-1000 originated mainly from the graphitic-N species with lower electron density and synergistic effect between the Se, S, N, and C in the catalyst. Besides, the hierarchically porous structure could also promote the reaction. Notably, the unique feature of this metal-free catalyst is that it tolerated other oxidizable groups, and showed no activity on further reaction of the products, thereby resulting in high selectivity. As far as we know, this is the first work for the synthesis of nitriles via oxidative cyanation of aldehydes over heterogeneous metal-free catalysts.

Uniform Cu/chitosan beads as a green and reusable catalyst for facile synthesis of imines via oxidative coupling reaction

A nonprecious metal and biopolymer-based catalyst, Cu/chitosan beads, has been successfully prepared by using a software-controlled flow system. Uniform, spherical Cu/chitosan beads can be obtained with diameters in millimeter-scale and narrow size distribution (0.78 ± 0.04 mm). The size and morphology of the Cu/chitosan beads are reproducible due to high precision of the flow rate. In addition, the application of the Cu/chitosan beads as a green and reusable catalyst has been demonstrated using a convenient and efficient protocol for the direct synthesis of imines via the oxidative self- and cross-coupling of amines (24 examples) with moderate to excellent yields. Importantly, the beads are stable and could be reused more than ten times without loss of the catalytic performance. Furthermore, because of the bead morphology, the Cu/chitosan catalyst has greatly simplified recycling and workup procedures.

Uniform, spherical Cu/chitosan beads prepared using a software-controlled flow system as a green and conveniently recyclable catalyst for the efficient synthesis of various imines in short reaction time.