A well-defined phosphine-free metal-ligand cooperative route for N-alkylation of aromatic amines via activation of renewable alcohols catalyzed by NNN pincer cobalt(II) complexes

This study presents the direct N-alkylation of aromatic amines using greener primary alcohols as alkyl donors, catalyzed by base metal-derived Co(II) catalysts via the borrowing hydrogen (BH) method. Two well-defined phosphine-free NNN-type pincer ligands (L1 and L2) were synthesized and utilized to prepare cobalt(II) catalysts C1 and C2. The catalysts were well characterized by UV-vis, IR, HRMS, and single-crystal X-ray diffraction studies. The catalysts C1 and C2 were utilized for the N-alkylation of various aromatic, heteroaromatic as well as aromatic diamines, and a wide substrate scope total of 30 derivatives was explored with isolated yields up to 95%. Two antihistamine drug precursors for tripelennamine and mepyramine were synthesized on a gram scale for the large-scale applicability of the current protocol. Various control experiments were also performed to explore the possible reaction intermediates and reaction pathway. Cobalt(II) intermediates involved in the catalytic cycle were also characterized by the HRMS study.

Synthesis of N-heterocycles through alcohol dehydrogenative coupling

Nitrogen heterocycles are found in the structures of many biologically important compounds, as well as materials used in the synthesis of fine chemicals. Notably, ~59% of US Food and Drug Administration-approved small-molecule drugs contain nitrogen heterocycles. It is therefore meaningful to explore greener or more sustainable methods for their synthesis. The use of alcohols as reagents is attractive as they can be readily obtained from biomass derived natural resources. In the last two decades, alcohol dehydrogenative coupling reaction to synthesize various heterocycles were extensively explored which furnished hydrogen (H2) and water (H2O) as the two greener byproducts. In this protocol, we describe several efficient catalytic transformations to synthesize quinolines, 1,8-naphthyridines, quinoxalines, quinazolines, pyrimidines, benzimidazoles, pyrroles and pyridines, using alcohol as starting materials. We also describe the synthesis of several homogeneous iridium/ruthenium catalysts and heterogeneous cobalt/copper catalysts that can be used in these transformations. The reaction setup is simple; in a Schlenk/reaction tube with magnetic stir-bar, alcohol, corresponding coupling reagents (nucleophiles), catalyst, base and solvent (water or organic solvent such as toluene, dioxane or p-xylene) are added. The reaction mixture is refluxed at the specified temperature (110-150 °C)-either in air or under argon-to furnish these heterocycles. Synthesis of the catalysts takes 3-5 h and the coupling reactions take 4-5 h depending on the target product. The cobalt- and copper-based heterogeneous catalytic systems displayed an good catalyst recyclability.

Nickel-Catalyzed Chemodivergent Coupling of Alcohols: Efficient Routes to Access α,α-Disubstituted Ketones and α-Substituted Chalcones

Chemodivergent (de)hydrogenative coupling of primary and secondary alcohols is achieved utilizing an inexpensive nickel catalyst, (6-OH-bpy)NiCl2 . This protocol demonstrates the synthesis of branched carbonyl compounds, α,α-disubstituted ketones, and α-substituted chalcones via borrowing hydrogen strategy and acceptorless dehydrogenative coupling, respectively. A wide range of aryl-based secondary alcohols are coupled with various primary alcohols in this tandem dehydrogenation/hydrogenation reaction. The nickel catalyst, along with KOt Bu or K2 CO3 , governed the selectivity for the formation of branched saturated ketones or chalcones. A preliminary mechanistic investigation confirms the reversible dehydrogenation of alcohols to carbonyls via metal-ligand cooperation (MLC) and the involvement of radical intermediates during the reaction.

T, Patil SA, Dateer RB. Biogenic synthesis of δ‐MnO2 nanoparticles: A sustainable approach for C‐alkylation and quinoline synthesis via acceptorless dehydrogenation and borrowing hydrogen reactions

The sustainable and environmentally benign biogenic synthesis of manganese‐oxide nanoparticles (MnO2 NPs) in a single crystalline δ‐phase and its subsequent synthetic utility have been described. The synthesized δ‐MnO2 NPs were characterized using scanning electron microscopy (SEM), energy dispersive X‐ray (EDX), and X‐ray diffraction (XRD) analysis techniques. The detailed analysis envisages the reduction of Mn(VII) to Mn(IV) was facilitated by various phytochemicals present in the aq. mango leaves extract, avoiding the use of external ligand source. The synthesized δ‐MnO2 NPs were perceived in a single delta (δ) monoclinic crystalline phase, wherein a spherical agglomerated morphology was displayed with a particle size of <5 nm. Further, the utility of newly developed δ‐MnO2 NPs was showcased for alpha‐keto‐alkylation and quinoline synthesis via hydrogen autotransfer and the acceptorless dehydrogenative coupling strategy. Moreover, a series of control experiments, mechanistic elucidation, catalyst recyclability, and a dye removal study were demonstrated.

Zn(II)-Catalyzed Multicomponent Sustainable Synthesis of Pyridines in Air

Herein, we report a Zn(II)-catalyzed solvent-free sustainable synthesis of tri- and tetra-substituted pyridines using alcohols as the primary feedstock and NH₄OAc as the nitrogen source. Using a well-defined air-stable Zn(II)-catalyst, 1a, featuring a redox-active tridentate azo-aromatic pincer, 2-((4-chlorophenyl)diazenyl)-1,10-phenanthroline (L^a), a wide variety of unsymmetrical 2,4,6-substituted pyridines were prepared by three-component coupling of primary and secondary alcohols with NH₄OAc. Catalyst 1a is equally compatible with the four-component coupling. Unsymmetrical 2,4,6-substituted pyridines were also prepared via a four-component coupling of a primary alcohol with two different secondary alcohols and NH₄OAc. A series of tetra-substituted pyridines were prepared up to 67% yield by coupling primary and secondary alcohols with 1-phenylpropan-1-one or 1,2-diphenylethan-1-one and NH₄OAc. The 1a-catalyzed reactions also proceeded efficiently upon replacing the secondary alcohols with the corresponding ketones, producing the desired tri- and tetra-substituted pyridines in higher yields in a shorter reaction time. A few control experiments were performed to unveil the mechanistic aspects, which indicates that the active participation of the aryl-azo ligand during catalysis enables the Zn(II)-complex to act as an efficient catalyst for the present multicomponent reactions. Aerial oxygen acts as an oxidant during the Zn(II)-catalyzed dehydrogenation of alcohols, producing H₂O and H₂O₂ as byproducts.

Ligand-Promoted [Pd]-Catalyzed α-Alkylation of Ketones through a Borrowing-Hydrogen Approach

A new class of palladium complexes bearing bidentate 2-hydroxypyridine based ligands have been prepared and fully characterized. The applications of these new complexes towards ketone alkylation reactions with alcohols through a metal-ligand cooperative borrowing-hydrogen (BH) process were demonstrated.

Leveraging Metal and Ligand Reactive Sites for One Pot Reactions: Ligand-Centered Borenium Ions for Tandem Catalysis with Palladium

Tandem catalysts that perform two different organic transformations in a single pot are highly desirable because they enable rapid and efficient assembly of simple organic building blocks into more complex molecules. Many examples of tandem catalysis rely on metal-catalyzed reactions involving one or more metal complexes. Remarkably, despite surging interest in the development of chemically reactive (i. e., non-innocent) ligands, there are few examples of metal complexes that leverage ligand-centered reactivity to perform catalytic reactions in tandem with separate catalytic reactions at the metal. Here we report how multifunctional Pd complexes with triaminoborane-derived diphosphorus ligands, called TBDPhos, appear to facilitate borenium-catalyzed cycloaddition reactions at the ligand, and Pd-catalyzed Stille and Suzuki cross-coupling reactions at the metal. Both transformations can be accessed in one pot to afford rare examples of tandem catalysis using separate metal and ligand catalysis sites in a single complex.

Water as a solvent: transition metal catalyzed dehydrogenation of alcohols going green

The long-established practice of using organic solvents in synthetic chemistry is currently becoming a major focus of environmental alarms as many of the chemical wastes are generated in the form of organic solvents. Recently, various alternative solvents have been recognized by the scientific community, including water, ionic liquids, supercritical fluids, glycerol, polyethylene glycol, etc. Among these alternatives, water is unquestionably an ideal solvent as it is abundant, cheap, non-toxic, and non-flammable. In the last few decades, a breakthrough has been achieved in the field of transition metal-catalyzed dehydrogenation of alcohols and the related chemistry for the sustainable synthesis of a wide range of valuable compounds. Although a large number of reports with new potential are published every year following this alcohol dehydrogenation strategy, the utilization of water as a solvent in alcohol dehydrogenation and related coupling reactions is yet to be highlighted properly. This review summarizes the advances in metal-catalyzed dehydrogenative functionalization of alcohols using water as a solvent.

Guerbet-type β-alkylation of secondary alcohols catalyzed by chromium chloride and its corresponding NNN pincer complex

β-Alkylation of alcohols has been efficiently accomplished using readily available 3d metal Cr under microwave conditions in air. Well-defined molecular Cr is involved with a KIE of 7.33 and insertion of α-alkylated ketone into Cr–H bond as the RDS.

Cyclometalated (NNC)Ru(II) complex catalyzed β-methylation of alcohols using methanol

Indolyl fragment containing phenanthroline based new ligands and their corresponding Ru(II) complexes were synthesized and fully characterized by various spectroscopic techniques. Catalytic activity of these newly synthesized cyclometalated (NNC)Ru(II) complexes...

Ligand-free Guerbet-type reactions in air catalyzed by in situ formed complexes of base metal salt cobaltous chloride

Inexpensive, earth-abundant & environmentally benign CoCl2 efficiently catalyses the β-alkylation of alcohol in unprecedented yields (89%) & turnovers (8900). Mechanistic studies are indicative of in situ generated homogeneous molecular Co catalysts.

Alternative Conceptual Approach to the Design of Bifunctional Catalysts: An Osmium Germylene System for the Dehydrogenation of Formic Acid

The reaction of the hexahydride OsH₆(PⁱPr₃)₂ with a P,Ge,P-germylene-diphosphine affords an osmium tetrahydride derivative bearing a Ge,P-chelate, which arises from the hydrogenolysis of a P–C(sp³) bond. This Os(IV)–Ge(II) compound is a pioneering example of a bifunctional catalyst based on the coordination of a σ-donor acid, which is active in the dehydrogenation of formic acid to H₂ and CO₂. The kinetics of the dehydrogenation, the characterization of the resting state of the catalysis, and DFT calculations point out that the hydrogen formation (the fast stage) exclusively occurs on the coordination sphere of the basic metal center, whereas both the metal center and the σ-donor Lewis acid cooperatively participate in the CO₂ release (the rate-determining step). During the process, the formate group pivots around the germanium to approach its hydrogen atom to the osmium center, which allows its transfer to the metal and the CO₂ release.

An alternative class of bifunctional catalysts can be assembled by coordination of σ-donor Lewis acids to platinum-group-metal basic fragments. In contrast to what happens with the previously reported bifunctional catalysts, this design allows enhancing the basicity of the base and the acidity of the acid. According to this, a bifunctional catalyst for the dehydrogenation of formic acid, based on an osmium(IV)-germylene cooperative system, has been prepared and the mechanism of the catalysis established.