Tailoring supramolecular nanotubes by bile salt based surfactant mixtures

Tailoring the Self-Assembly of Steviol Glycoside Nanocarriers with Steroidal Amphiphiles

Bile salts are biosurfactants that can induce structure transformations in supramolecular nanoassemblies with conventional surfactants owing to their unique, planar amphiphilic character and the rigidity of their hydrophobic steroid skeleton. However, structural information about the association of bile salts and amphiphilic glycosides is lacking. In this work, we investigated the micelle structure of two anionic di- and trihydroxy bile salts [sodium deoxycholate (SDC) and sodium cholate (SC)] and a conventional anionic surfactant [sodium dodecyl sulfate (SDS)] in mixtures with a nonionic steviol glycoside [α-glucosyl stevia (Stevia-G)] and studied their potential as a nanocarrier system for two poorly water-soluble drugs (clotrimazole and ketoconazole). Decreased critical micelle concentrations determined from surface tension measurements demonstrate synergistic interactions between Stevia-G and SDS/SDC/SC in a decreasing order. Small-angle X-ray and neutron scattering, interpreted by a core-shell ellipsoid model, indicate that SDS and bile salts act differently on the mixed micelle structure. Compared with SDS/Stevia-G, bile salt/Stevia-G had a core-shell structure more similar to that of pure Stevia-G micelles. SDC and SDS had an increasing and decreasing influence, respectively, on the available molecular surface area in mixtures with Stevia-G on the micelle core but a similar influence on the micelle shell solvation number relative to that of their pure micellar structures. The number of bile salt hydroxyl groups was influential in determining the micelle stoichiometry: an increasing number of hydroxyl groups corresponded to decreasing bile salt aggregation numbers and a smaller hydrophobic micellar core. The core volume was the most important structural factor in explaining the drug solubilization capacity of the nanocarrier systems. Therefore, bile salt-steviol glycoside mixed micellar assemblies exhibit structure control mechanisms allowing the fine-tuning of their interior hydrophobic domains important for nanocarrier applications toward solubilization of poorly water-soluble drugs.

Designed Synthesis of Compartmented Bienzyme Biocatalysts Based on Core-Shell Zeolitic Imidazole Framework Nanostructures

For complex cascade biocatalysis, multienzyme compartmentalization helps to optimize substrate transport channels and promote the orderly and tunable progress of step reactions. Herein, a simple and general synthesis strategy is proposed for the construction of a multienzyme biocatalyst by compartmentalizing glucose oxidase and horseradish peroxidase (GOx and HRP) within core-shell zeolite imidazole frameworks (ZIF)-8@ZIF-8 nanostructures. Owing to the combined effects of biomimetic mineralization and the fine regulation of the ZIF-8 growth process, the uniform shell encloses the seed (core) surface by epitaxial growth, and the bienzyme system is accurately localized in a controlled manner. The versatility of this strategy is also reflected in ZIF-67. Meanwhile, with the ability to covalently bind divalent metal ions, lithocholic acid (LCA) is used as a competitive ligand to improve the pore structure of the ZIF from a single micropore to a hierarchical micro/mesopore network, which greatly increases mass transfer efficiency. Furthermore, the multienzyme cascade reaction is exemplified by the oxidation of o-phenylenediamine (OPD). The findings show that the bienzyme assembly strategy significantly affects the biocatalytic efficiency mainly by influencing the utilization efficiency of the intermediate (Hydrogen peroxide, H₂ O₂ ) between the step reactions. This study sheds new light on facile synthetic routes to constructing in vitro multienzyme biocatalysts.

Reshaping Membrane Polymorphism of Polymer Vesicles through Dynamic Gas Exchange

The quest for a universal method to shape the vesicular morphology in dynamic and diversified manners is a challenging topic of cell mimicry. Here we present a simple gas exchange strategy that can direct the deformation movements of polymer vesicles. Such vesicles are assembled by a class of gas-based dynamic polymers, where CO₂ connects between the frustrated Lewis pair via dynamic gas-bridged bonds. Use of other competitive gases (N₂O, SO₂, or C₂H₄) to in situ exchange the CO₂ linkages can change the polymer structure and drive the membrane to proceed with three fundamental movements, including membrane stretching, membrane incurvation, and membrane protrusion, thus remolding the shapes of polymersomes. The choices of gas types, concentrations, and combinations are crucial to adjusting the vesicle evolution, local change of membrane curvature, and anisotropic geometrical transformation. This will become a generalized strategy to control the vesicular polymorphism and deformable behavior.

Conversion of bile salts from inferior emulsifier to efficient smart emulsifier assisted by negatively charged nanoparticles at low concentrations

Bile salts (BS), one of the biological amphiphiles, are usually used as solubilizing/emulsifying agents of lipids or drugs. However, BS such as sodium deoxycholate (NaDC) can't stabilize an oil-in-water (O/W) emulsion alone due to its unusual molecular structure. In this paper we report that these emulsifiers with poor emulsifying ability can be transformed to highly efficient emulsifiers by combining with negatively charged particles (silica or montmorillonite). Both together can synergistically co-stabilize oil-in-water emulsions at extremely low concentrations (minimum 0.01 mM NaDC plus 0.003 wt% particles). Moreover, the emulsions can be reversibly switched between stable and unstable triggered by CO₂/N₂ at room temperature. This strategy is universal for emulsions containing different oils (alkanes, aromatic hydrocarbons and triglycerides) and for different BS and offers a generic model for a variety of BS of different molecular structure, which will extend their applications in more technical fields such as emulsion polymerization, biphasic catalysis and emulsion extraction.

Bile salts can be converted to efficient emulsifiers assisted by a trace amount of similarly charged nanoparticles and the emulsions formed are CO₂/N₂ switchable at room temperature.

Self-Assembly of a Pyridine-Based Amphiphile Complexed with Regioisomeric Dihydroxy Naphthalenes into Supramolecular Nanotubes with Different Inner Diameters

A pyridine-based amphiphile complexed with 1,5-, 1,6-, 2,6-, or 2,7-dihydroxy naphthalene self-assembled in water to form nanotubes with inner diameters of 46, 38, 24, 18, and 11 nm in which the naphthalene molecules formed J-type aggregates. In contrast, the amphiphile complexed with 1,2-, 1,3-, 1,4-, 1,7-, 1,8-, or 2,3-dihydroxy naphthalene formed nanofibers in which the naphthalene molecules formed H-type aggregates. The inner diameter of the nanotubes strongly depended on the regioisomeric dihydroxy naphthalene. UV-vis, fluorescence, infrared spectroscopy, X-ray diffraction analysis, and differential scanning calorimetry showed that nanotubes with smaller inner diameters had weaker intermolecular hydrogen bonds between the tilted amphiphiles complexed with the naphthalene molecules within the membrane walls and showed larger Stokes shifts in the excimer fluorescence of the naphthalene moiety. These findings should be useful not only for fine-tuning the inner diameters of supramolecular nanotubes but also for controlling the aggregation states of functional aromatic molecules to generate nanostructures with useful optical and electronic properties in water.

Multiscale Structural Elucidation of Peptide Nanotubes by X-Ray Scattering Methods

This mini-review presents the structural investigations of the self-assembled peptide nanotubes using X-ray scattering techniques. As compared to electron microscopy, scattering methods enable studies of nanotubes in solution under the appropriate physicochemical conditions and probe their formation mechanism. In addition, a combination of X-ray scattering methods allow the elucidation of structural organization from the molecular scale to the dimension of nanotubes.

Physiology and Physical Chemistry of Bile Acids

Bile acids (BAs) are facial amphiphiles synthesized in the body of all vertebrates. They undergo the enterohepatic circulation: they are produced in the liver, stored in the gallbladder, released in the intestine, taken into the bloodstream and lastly re-absorbed in the liver. During this pathway, BAs are modified in their molecular structure by the action of enzymes and bacteria. Such transformations allow them to acquire the chemical-physical properties needed for fulling several activities including metabolic regulation, antimicrobial functions and solubilization of lipids in digestion. The versatility of BAs in the physiological functions has inspired their use in many bio-applications, making them important tools for active molecule delivery, metabolic disease treatments and emulsification processes in food and drug industries. Moreover, moving over the borders of the biological field, BAs have been largely investigated as building blocks for the construction of supramolecular aggregates having peculiar structural, mechanical, chemical and optical properties. The review starts with a biological analysis of the BAs functions before progressively switching to a general overview of BAs in pharmacology and medicine applications. Lastly the focus moves to the BAs use in material science.

Stimuli-Sensitive Self-Assembled Tubules Based on Lysine-Derived Surfactants for Delivery of Antimicrobial Proteins

Drug delivery vectors based on amphiphiles have important features such as versatile physicochemical properties and stimuli-responsiveness. Amino acid-based surfactants are especially promising amphiphiles due to their enhanced biocompatibility compared to conventional surfactants. They can self-organize into micelles, vesicles and complex hierarchical structures, such as fibers, twisted and coiled ribbons, and tubules. In this work, we investigated the self-assembly and drug loading properties of a family of novel anionic double-tailed lysine-derived surfactants, with variable degree of tail length mismatch, designated as mLys10 and 10Lysn, where m and n are the number of carbon atoms in the tails. These surfactants form tubular aggregates with assorted morphologies in water that undergo gelation due to dense entanglement, as evidenced by light and electron microscopy. Lysozyme (LZM), an enzyme with antimicrobial properties, was selected as model protein for loading. After the characterization of the interfacial properties and phase behavior of the amphiphiles, the LZM-loading ability of the tubules was investigated, under varying experimental conditions, to assess the efficiency of the aggregates as pH- and temperature-sensitive nanocarriers. Further, the toxicological profile of the surfactants per se and surfactant/LZM hydrogels was obtained, using human skin fibroblasts (BJ-5ta cell line). Overall, the results show that the tubule-based hydrogels exhibit very interesting properties for the transport and controlled release of molecules of therapeutic interest.

Solution Self-Assembly of Chalcogen-Bonding Polymer Partners

Chalcogen bonding is regarded as a form of noncovalent interaction; however, harnessing chalcogen bonds to drive macromolecular self-assembly remains unexplored. Here we report two classes of chalcogen-bonding partner polymers and their unique self-assembly behaviors in THF/H₂O solution. Using simple poly(4-vinylphenyl chalcogenide) (P4VCh, Ch = Te or Se) as the donor polymer and poly(ethylene oxide)-block-poly(4-vinylpyridine N-oxide) (PEO-b-P4VO) as the acceptor polymer, they can form donor-acceptor noncovalent complexes and further aggregate into tubular and spherical assemblies through interchain Te···O and Se···O chalcogen-chalcogen interactions. The small distinction in binding affinity of chalcogen bonds can dictate the assembly of different geometries. Moreover, mixing the strong and weak chalcogen-bonding pairs in various ratios can allow us to obtain ergodic phase evolution with tunable dimensionality and morphology.

Tube to ribbon transition in a self-assembling model peptide system

Peptides that self-assemble into β-sheet rich aggregates are known to form a large variety of supramolecular shapes, such as ribbons, tubes or sheets. However, the underlying thermodynamic driving forces for such different structures are still not fully understood, limiting their potential applications. In the A_nK peptide system (A = alanine, K = lysine), a structural transition from tubes to ribbons has been shown to occur upon an increase of the peptide length, n, from 6 to 8. In this work we analyze this transition by means of a simple thermodynamic model. We consider three energy contributions to the total free energy: an interfacial tension, a penalty for deviating from the optimal β-sheet twist angle, and a hydrogen bond deformation when the β-sheets adopt a specific self-assembled structure. Whilst the first two contributions merely provide similar constant energy offsets, the hydrogen bond deformations differ depending on the studied structure. Consequently, the tube structure is thermodynamically favored for shorter A_nK peptides, with a crossover at n≈ 13. This qualitative agreement of the model with the experimental observations shows, that we have achieved a good understanding of the underlying thermodynamic features within the self-assembling A_nK system.

Hierarchical porous and hydrophilic metal-organic frameworks with enhanced enzyme activity

Metal-organic frameworks (MOFs) for enzyme encapsulation-induced biomimetic mineralization under mild reaction conditions are commonly microporous and hydrophobic, which result in a rather high mass transfer resistance of the reactants and restrain the enzyme catalytic activity. Herein, we prepared a type of hierarchical porous and hydrophilic MOF through the biomimetic mineralization of enzymes, zinc ions, 2-methylimidazole, and lithocholic acid. The hierarchical porous structure accelerated the diffusion process of the reactants and the increased hydrophilicity conferred interfacial activity and increased the enzyme catalytic activity. The immobilized enzyme retained higher catalytic activity than the free enzyme and exhibited enhanced resistance to alkaline, organic, and high-temperature conditions. The nanobiocatalyst was reusable and showed long-term storage stability.

C-12 vs C-3 substituted bile salts: An example of the effects of substituent position and orientation on the self-assembly of steroid surfactant isomers

Biomolecule derivatives are transversally used in nanotechnology. Deciphering their aggregation behavior is a crucial issue for the rational design of functional materials. To this end, it is necessary to build libraries of selectively functionalized analogues and infer general rules. In this work we enrich the highly applicative oriented collection of steroid derivatives, by reporting a rare example of C-12 selectively modified bile salt. While nature often exploits such position to encode functions, it is unusual and not trivial to prepare similar analogues in the laboratory. The introduction of a tert-butyl phenyl residue at C-12 provided a molecule with a self-assembly that remarkably switched from rigid pole-like structures to twisted ribbons at a biologically relevant critical temperature (∼25 °C). The system was characterized by microscopy and spectroscopy techniques and compared with the C-3 functionalized analogue. The twisted ribbons generate samples with a gel texture and a viscoelastic response. The parallel analysis of the two systems suggested that the observed thermoresponsive self-assemblies occur at similar critical temperatures and are probably dictated by the nature of the substituent, but involve aggregates with different structures depending on position and orientation of the substituent. This study highlights the self-assembly properties of two appealing thermoresponsive systems. Moreover, it adds fundamental insights hereto missing in the investigations of the relation between self-assembly and structure of synthetic steroids, which are valuable for the rational design of steroidal amphiphiles.

Block copolymers as bile salt sequestrants: intriguing structures formed in a mixture of an oppositely charged amphiphilic block copolymer and bile salt

To study the formation and characterize the structure of mixed complexes of oppositely charged block copolymers and surfactants are of great significance for practical applications, e.g., in drug carrier formulations that are based on electrostatically assisted assembly. In this context, biocompatible block copolymers and biosurfactants (like bile salts) are particularly interesting. In this work, we report on the co-assembly in dilute aqueous solution between a cationic poly(N-isopropyl acryl amide) (PNIPAM) diblock copolymer and the oppositely charged bile salt surfactant sodium deoxycholate at ambient temperature. The cryogenic transmission electron microscopy (cryo-TEM) experiments revealed the co-existence of two types of co-assembled complexes of radically different morphology and inner structure. They are formed mainly as a result of the electrostatic attraction between the positively charged copolymer blocks and bile salt anions and highlight the potential of using linear amphiphilic block copolymers as bile salt sequestrants in the treatment of bile acid malabsorption and hypercholesterolemia. The first complex of globular morphology has a coacervate core of deoxycholate anions and charged copolymer blocks surrounded by a PNIPAM corona. The second complex has an intriguing tape-like supramolecular morphology of several micrometer in length that is striped in the direction of the long axis. A model is presented in which the stretched cationic blocks of several block copolymers interact electrostatically with the bile salt molecules that are associated to form a zipper-like structure. The tape is covered on both sides by the PNIPAM chains that stabilize the overall complex in solution. In addition to cryo-TEM, the mixed system was investigated in a range of molar charge fractions at a constant copolymer concentration by static light scattering, small angle X-ray scattering, and electrophoretic mobility measurements.

Bile Salts: Natural Surfactants and Precursors of a Broad Family of Complex Amphiphiles

Bile salts (BSs) are naturally occurring rigid surfactants with a steroidal skeleton and specific self-assembly and interface behaviors. Using bile salts as precursors, derivatives can be synthesized to obtain molecules with specific functionalities and amphiphilic structure. Modifications on single molecules are normally performed by substituting the least-hindered hydroxyl group on carbon C-3 of the steroidal A ring or at the end of the lateral chain. This leads to monosteroidal rigid building blocks that are often able to self-organize into 1D structures such as tubules, twisted ribbons, and fibrils with helical supramolecular packing. Tubular aggregates are of particular interest, and they are characterized by cross-section inner diameters spanning a wide range of values (3-500 nm). They can form through appealing pH- or temperature-responsive aggregation and in mixtures of bile salt derivatives to provide mixed tubules with tunable charge and size. Other derivatives can be prepared by covalently linking two or more bile salt molecules to provide complex systems such as oligomers, dendrimers, and polymeric materials. The unconventional amphiphilic molecular structure imparts specific features to BSs and derivatives that can be exploited in the formulation of capsules, drug carriers, dispersants, and templates for the synthesis of nanomaterials.

Artificial Nanometalloenzymes for Cooperative Tandem Catalysis

Artificial metalloenzymes that combine the advantages of natural enzymes and metal catalysts have been getting more attention in research. As a proof of concept, an artificial nanometalloenzyme (CALB-Shvo@MiMBN) was prepared by co-encapsulation of metallo-organic catalyst and enzyme in a soft nanocomposite consisting of 2-methylimidazole, metal ions, and biosurfactant in mild reaction conditions using a one-pot self-assembly method. The artificial nanometalloenzyme with lipase acted as the core, and the metallo-organic catalyst embedded in micropore exhibited a spherical structure of 30-50 nm in diameter. The artificial nanometalloenzyme showed high catalytic efficiency in the dynamic kinetic resolution of racemic primary amines or secondary alcohols compared to the one-pot catalytic reaction of immobilized lipase and free metallo-organic catalyst. This artificial nanometalloenzyme holds great promise for integrated enzymatic and heterogeneous catalysis.

Highly active nanobiocatalysis in deep eutectic solvents via metal-driven enzyme-surfactant nanocomposite

Metal-driven papain-surfactant nanocomposite (PA@MSNC), a novel soft nanobiocatalyst, was successfully prepared via one-pot self-assembly technique in aqueous solution for the biosynthesis of N-(benzyloxycarbonyl)-L-alanyl-L-glutamine (Z-Ala-Gln) dipeptide in deep eutectic solvents (DESs). The metal-driven self-assembly process generated PA@MSNC as nanospheres of ˜130 nm in diameter, with high protein loading and relative enzyme activity of 420 mg/g and 80% (4270 U/g protein), respectively. PA@MSNC showed high apparent substrate affinity and catalytic efficiency. The stability of PA@MSNC at high temperature and extreme pH was significantly higher than that of free PA. Catalysis efficiency for the biosynthesis of Z-Ala-Gln by PA@MSNC in choline chloride: glycerol reaction medium was 1.69-fold higher than that of free PA, achieving a high product yield of 75.7% within 4 h. PA@MSNC also showed better techno-economic performance. We propose that enzyme-surfactant nanocomposite via metal-driven dynamically reversible coordination interactions contribute simultaneously promotes catalytic flexibility and configurational stability. The generated PA@MSNC has potential practical implications for green synthesis of dipeptide in DESs.

A fluorescence study of the loading and time stability of doxorubicin in sodium cholate/PEO-PPO-PEO triblock copolymer mixed micelles

HYPOTHESIS

Doxorubicin hydrochloride (DX) is one of the most powerful anticancer agents though its clinical use is impaired by severe undesired side effects. DX encapsulation in nanocarrier systems has been introduced as a mean to reduce its toxicity. Micelles of the nonionic triblock copolymers of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) (PEO-PPO-PEO), are very promising carrier systems. The positive charge of DX confines the drug to the hydrophilic corona region of the micelles. The use of mixed micelles of PEO-PPO-PEO copolymers and a negatively charged bile salt should favour the solubilization of DX in the apolar core region of the micelles.

EXPERIMENTS

We studied the DX uptake in the micellar systems formed by sodium cholate (NaC) and the PEO₁₀₀PPO₆₅PEO₁₀₀ (F127) copolymer, prepared with different mole ratios (MR = n_NaC/n_F127) in the range 0 ÷ 1. The systems were characterized by small angle X-ray scattering (SAXS) and dynamic light scattering (DLS); DX encapsulation was followed by steady-state and time-resolved fluorescence spectroscopy.

FINDINGS

The successful solubilization of DX in the host micellar systems did not affect their structure, as evidenced by both SAXS and DLS data. In the presence of NaC, DX experiences a more apolar environment as indicated by its characteristic fluorescent behaviour. The almost complete uptake of the drug occurred shortly after the sample preparation; however, time resolved fluorescence revealed a slow partition of DX between corona and core regions of the micelles. DX degradation in the mixed micellar systems was markedly reduced relative to aqueous DX solutions.

Bile acid derivative-based catanionic mixtures: versatile tools for superficial charge modulation of supramolecular lamellae and nanotubes

Self-assembled structures formed by mixtures of cationic and anionic surfactants are interesting tools for applications requiring interactions with charged particles and molecules. Nevertheless, they present instability close to the equimolar composition and poor morphological versatility, which is generally restricted to vesicles and micelles. Against this general trend, we report on bile salt derivative based catanionic mixtures assembling in tubules and lamellae depending on the mixture composition. Electrophoretic mobility measurements prove that the composition also dictates their superficial charge, which can be tuned from negative to positive by increasing the positively charged surfactant fraction in the mixtures. The study of the catanionic aggregates was conducted by means of microscopy and spectroscopy techniques and compared to the self-assembly behaviors of the individual building blocks. This study broadens the so far small array of bile salt derivative catanionic systems, confirming their distinctive behavior in the spectrum of catanionic mixtures.

Formation of Spherulitic J-Aggregates from the Coassembly of Lithocholic Acid and Cyanine Dye

Supramolecular aggregates of organic dyes through noncovalent interactions have attracted great interest because they exhibit collective optical and excitonic properties. We report the formation of spherulitic J-aggregates from the coassembly of lithocholic acid (LCA) and 3,3'-diethylthiacarbocyanine iodide (DiSC₂(3)) in ammonia solution. Each spherulite contains a core, which serves as a nucleus for the growth of radially oriented J-aggregate fibrils. We find that the growth of spherulitic J-aggregates exhibits a sigmoidal kinetic curve with an initial lag time, followed by a period of rapid growth and a finally slow approach to equilibrium.

Twisted nanoribbons from a RGD-bearing cholic acid derivative

In light of the biomedical interest for self-assembling amphiphiles bearing the tripeptide Arg-Gly-Gly (RGD), a cholic acid derivative was synthesized by introducing an aromatic moiety on the steroidal skeleton and the RGD sequence on the carboxylic function of its chain 17-24, thus forming a peptide amphiphile with the unconventional rigid amphiphilic structure of bile salts. In aqueous solution, the compound self-assembled into long twisted ribbons characterized by a very low degree of polydispersity in terms of width (≈25nm), thickness (≈4.5nm) and pitch (≈145nm). It was proposed that in the ribbon the molecules are arranged in a bilayer structure with the aromatic moieties in the interior, strongly involved in the intermolecular interaction, whereas the RGD residues are located at the bilayer-water interface. The nanostructure is significantly different from those generally provided by RGD-containing amphiphiles with the conventional peptide-tail structure, for which fibers with a circular cross-section were observed, and successfully tested as scaffolds for tissue regeneration. From previous work on the use of this kind of nanostructures, it is known that features like morphology, rigidity, epitope spacing and periodicity are important factors that dramatically affect cell adhesion and signaling. Within this context, the reported results demonstrate that bile salt-based peptide surfactants are promising building blocks in the preparation of non-trivial RGD-decorated nanoaggregates with well-defined morphologies and epitope distributions.

On the stability of lithocholate derivative supramolecular tubules

Solubility and calorimetry data provide the description of a phase map for metastable supramolecular nanotubes of biological origin.

Supramolecular Self-Assembly into Biofunctional Soft Nanotubes: From Bilayers to Monolayers

The inner and outer surfaces of bilayer-based lipid nanotubes can be hardly modified selectively by a favorite functional group. Monolayer-based nanotubes display a definitive difference in their inner and outer functionalities if bipolar wedge-shaped amphiphiles, so-called bolaamphiphiles, as a constituent of the monolayer membrane pack in a parallel fashion with a head-to-tail interface. To exclusively form unsymmetrical monolayer lipid membranes, we focus herein on the rational molecular design of bolaamphiphiles and a variety of self-assembly processes into tubular architectures. We first describe the importance of polymorph and polytype control and then discuss diverse methodologies utilizing a polymer template, multiple hydrogen bonds, binary and ternary coassembly, and two-step self-assembly. Novel biologically important functions of the obtained soft nanotubes, brought about only by completely unsymmetrical inner and outer surfaces, are discussed in terms of protein refolding, drug nanocarriers, lectin detection, a chiral inducer for achiral polymers, the tailored fabrication of polydopamine, and spontaneous nematic alignment.

Crystal structure of a lithium salt of a glucosyl derivative of lithocholic acid

The crystal structure of a Li(+) salt of a glucosyl derivative of lithocholic acid (lithium 3α-(α-d-glucopyranosyl)-5β-cholan-24-oate) has been solved. The crystal belongs to the orthorhombic system, P212121 spatial group, and includes acetone and water in the structure with a 1:1:2 stoichiometry. Monolayers, having a hydrophobic interior and hydrophilic edges, are recognized in the crystal structure. Li(+) is coordinated to three hydroxyl groups of three different glucose residues, with two of them belonging to the same monolayer. A fourth molecule, located in this monolayer, is involved in the coordination of the cation through the carboxylate ion by an electrostatic interaction, thus completing a distorted tetrahedron. All Li(+)-oxygen distances values are very close to the sum of the ionic radius of Li(+) and van der Waals radius of oxygen. Each steroid molecule is linked to other five steroid molecules through hydrogen bonds. Water and acetone are also involved in the hydrogen bond network. A hierarchical organization can be recognized in the crystal, the helical assembly along 21 screw axes being left-handed.

Self-Assembly and Rheological Properties of a Pseudogemini Surfactant Formed in a Salt-Free Catanionic Surfactant Mixture in Water

The surface and bulk properties of bola-type dicarboxylic acid (sebacic acid, SA) and zwitterionic surfactant tetradecyldimethylamine oxide (C14DMAO) mixtures in aqueous solutions were studied. Surface tension measurements indicate a pronounced synergistic effect between SA and C14DMAO. In bulk aqueous solutions, rich phase behavior was observed with a varied SA-to-C14DMAO ratio (ρ) and a total surfactant concentration. Typically at ρ = 0.5, a novel pseudogemini surfactant (C14-S-C14) forms, driven by electrostatic interaction and hydrogen bonding. The C14-S-C14/H2O system exhibits rich phase behavior induced by the transition of aggregates. With increasing concentration of C14-S-C14, one can observe a viscous L1 phase, an L1/Lα two-phase region where a birefringent Lα phase is on the top of an L1 phase, a single Lα phase, and finally a mixture of an Lα phase and a precipitate. Microstructures formed in the Lα phases were determined by freeze-fracture transmission electron microscopy (FF-TEM) and cryogenic-transmission electron microscopy (cryo-TEM) observations. Polymorphic aggregation behavior was observed with the formation of a variety of bilayer structures including unilamellar vesicles, onions, and open and hyperbranched bilayers. Rheological measurements showed that the Lα phases are viscoelastic and sensitive to temperature where a quick loss of viscoelasticity was observed at elevated temperature.