Harnessing Plasticity in an Amine-Borane as a Piezoelectric and Pyroelectric Flexible Film

Flexible, biodegradable ultrasonic wireless electrotherapy device based on highly self-aligned piezoelectric biofilms

Biodegradable piezoelectric devices hold great promise in on-demand transient bioelectronics. Existing piezoelectric biomaterials, however, remain obstacles to the development of such devices due to difficulties in large-scale crystal orientation alignment and weak piezoelectricity. Here, we present a strategy for the synthesis of optimally orientated, self-aligned piezoelectric γ-glycine/polyvinyl alcohol (γ-glycine/PVA) films via an ultrasound-assisted process, guided by density functional theory. The first-principles calculations reveal that the negative piezoelectric effect of γ-glycine originates from the stretching and compression of glycine molecules induced by hydrogen bonding interactions. The synthetic γ-glycine/PVA films exhibit a piezoelectricity of 10.4 picocoulombs per newton and an ultrahigh piezoelectric voltage coefficient of 324 × 10-3 volt meters per newton. The biofilms are further developed into flexible, bioresorbable, wireless piezo-ultrasound electrotherapy devices, which are demonstrated to shorten wound healing by ~40% and self-degrade in preclinical wound models. These encouraging results offer reliable approaches for engineering piezoelectric biofilms and developing transient bioelectronics.

A Highly Electrostrictive Salt Cocrystal and the Piezoelectric Nanogenerator Application of Its 3D-Printed Polymer Composite

Ionic cocrystals with hydrogen bonding can form exciting materials with enhanced optical and electronic properties. We present a highly moisture-stable ammonium salt cocrystal [CH3C6H4CH(CH3)NH2][CH3C6H4CH(CH3)NH3][PF6] ((p-TEA)(p-TEAH)·PF6) crystallizing in the polar monoclinic C2 space group. The asymmetry in (p-TEA)(p-TEAH)·PF6 was induced by its chiral substituents, while the polar order and structural stability were achieved by using the octahedral PF6- anion and the consequent formation of salt cocrystal. The ferroelectric properties of (p-TEA)(p-TEAH)·PF6 were confirmed through P-E loop measurements. Piezoresponse force microscopy (PFM) enabled the visualization of its domain structure with characteristic "butterfly" and hysteresis loops associated with ferro- and piezoelectric properties. Notably, (p-TEA)(p-TEAH)·PF6 exhibits a large electrostrictive coefficient (Q33) value of 2.02 m4 C-2, higher than those found for ceramic-based materials and comparable to that of polyvinylidene difluoride. Furthermore, the composite films of (p-TEA)(p-TEAH)·PF6 with polycaprolactone (PCL) polymer and its gyroid-shaped 3D-printed composite scaled-up device, 3DP-Gy, were prepared and evaluated for piezoelectric energy-harvesting functionality. A high output voltage of 22.8 V and a power density of 118.5 μW cm-3 have been recorded for the 3DP-Gy device. Remarkably, no loss in voltage outputs was observed for the (p-TEA)(p-TEAH)·PF6 devices even after exposure to 99% relative humidity, showcasing their utility under extremely humid conditions.

A Chiral B-N Adduct as a New Frontier in Ferroelectrics and Piezoelectric Energy Harvesting

Within the burgeoning field of electronic materials, B-N Lewis acid-base pairs, distinguished by their partial charge distribution across boron and nitrogen centers, represent an underexplored class with significant potential. These materials exhibit inherent dipoles and are excellent candidates for ferroelectricity. However, the challenge lies in achieving the optimal combination of hard-soft acid-base pairs to yield B-N adducts with stable dipoles. Herein, we present an enantiomeric pair of B-N adducts [R/SC6H5CH(CH3)NH2BF3] (R/SMBA-BF3) crystallizing in the polar monoclinic P21 space group. The ferroelectric measurements on RMBA-BF3 gave a rectangular P-E hysteresis loop with a remnant polarization of 7.65 μC cm-2, a value that aligns with the polarization derived from the extensive density-functional theory computations. The PFM studies on the drop-casted film of RMBA-BF3 further corroborate the existence of ferroelectric domains, displaying characteristic amplitude-bias butterfly and phase-bias hysteresis loops. The piezoelectric nature of the RMBA-BF3 was confirmed by its direct piezoelectric coefficient (d33) value of 3.5 pC N-1 for its pellet. The piezoelectric energy harvesting applications on the sandwich devices fabricated from the as-made crystals of RMBA-BF3 gave an open circuit voltage (VPP) of 6.2 V. This work thus underscores the untapped potential of B-N adducts in the field of piezoelectric energy harvesting.

Recent advancements in chemosensors for the detection of food spoilage

The need for reliable sensors has become a major requirement to confirm the quality and safety of food commodities. Chemosensors are promising sensing tools to identify contaminants and food spoilage to ensure food safety. Chemosensing materials are evolving and becoming potential mechanisms to enable onsite and real-time monitoring of food safety. This review summarizes the information about the basic four types of chemosensors (colorimetric, optical, electrochemical, and piezoelectric) employed in the food sector, the latest advancements in the development of chemo-sensing mechanisms, and their food applications, with special emphasis on the future outlook of them. In this review, we discuss the novel chemosensors developed from the year 2018 to 2022 to detect spoilage in some common types of food like fish, meat, milk, cheese and soy sauce. This work will provide a fundamental step toward further development and innovations of chemosensors targeting different arenas in the food industry.

Significantly Enhanced Poling Efficiency of Piezocomposites by Tuning Resistivity of a Polymer Matrix

Although the ability to convert biomechanical vibrations into electric energy has been demonstrated in organic-inorganic piezocomposites, it is challenging to improve their piezoelectric properties owing to insufficient electric field poling. Here, we propose a facile and effective approach to enhance the poling efficiency of a barium calcium zirconate titanate/polydimethylsiloxane (BCZT/PDMS) composite by introducing copper nanowires (Cu NWs) to tune the resistivity of the PDMS matrix. The Cu NW-modified PDMS weakens the resistivity mismatch between the BCZT filler and the PDMS matrix, allowing a higher poling electric field to be applied to the BCZT filler during poling. As a result, the BCZT/Cu-PDMS piezocomposite exhibited a high piezoelectric quality factor (d33 × g33) of 2.58 pm2/N, which was about 7 times higher than that of BCZT/PDMS (d33 × g33 = 0.38 pm2/N). Moreover, BCZT/Cu-PDMS showed a much higher power density (3.18 μW/cm2) and a faster charging capability. This composite approach of introducing metal nanowires can be considered as a generic poling-improvement method that can be extended to other organic-inorganic piezocomposite systems.

Ferroelectric Ionic Molecular Crystals with Significant Plasticity and a Low Melting Point: High Performance in Hot-Pressed Polycrystalline Plates and Melt-Grown Crystalline Sheets

Among ferroelectric crystals based on small molecules, plastic/ferroelectric crystals are currently receiving particular attention because they can be used as bulk polycrystals. Herein, we show that an ionic molecular ferroelectric crystal, guanidinium tetrafluoroborate, exhibits significant malleability and multiaxial ferroelectricity despite the absence of a plastic crystal phase. Powder samples of this crystal can be processed into transparent bulk crystalline plates either by press-forming or by melt-growing. The plates show high ferroelectric performance and related properties, demonstrating the largest hitherto reported spontaneous polarization for bulk polycrystals of small-molecule-based ferroelectrics. Owing to the ready availability of large-scale materials and processability into various bulk crystalline forms, this ferroelectric crystal represents a highly promising functional material that will boost research on diverse applications as bulk crystals.

Mechanistic insights into H3B·NMeH2 dehydrogenation by Co-based complexes: a DFT perspective

Mechanistic insights into Co-catalyzed H3B·NMeH2 dehydrogenation and polyaminoborane formation are carefully investigated using density functional theory.

Flexible Piezoelectric and Pyroelectric Nanogenerators Based on PAN/TMAB Nanocomposite Fiber Mats for Self-Power Multifunctional Sensors

Self-powered wearable electronics to convert mechanical and thermal energy into electrical energy are important for biomedical monitoring, which highly require good flexibility, comfortability, signal sensitivity, and accuracy. In this work, composite nanofiber mats of polyacrylonitrile (PAN) and trimethylamine borane (TMAB) were prepared by electrospinning, which exhibited excellent piezoelectric and pyroelectric abilities in harvesting mechanical and thermal energy. The PAN/TMAB-4 nanofiber mats not only generated a high voltage of up to 2.56 V and a high power of 0.19 μW upon shape deformation but also exhibited linear voltage response to thermal gradient. The hybrid piezoelectric and pyroelectric output signals were successfully integrated together and have been applied to precisely monitor human vital signs, including elbow bending angles, foot posture, and breathing status, in real time by attaching the flexible sensors to proper human body parts. Overall, good flexibility, bifunctional sensing ability, and self-power make PAN-/TMAB-type sensors very attractive in fabricating high-performance electronics for detecting motion, monitoring health, and making portable microelectronics.

Dehydropolymerization of H3B·NMeH2 Mediated by Cationic Iridium(III) Precatalysts Bearing κ3-iPr-PNRP Pincer Ligands (R = H, Me): An Unexpected Inner-Sphere Mechanism

The dehydropolymerization of H₃B·NMeH₂ to form N-methylpolyaminoborane using neutral and cationic catalysts based on the {Ir(ⁱPr-PN^HP)} fragment [ⁱPr-PN^HP = κ³-(CH₂CH₂PⁱPr₂)₂NH] is reported. Neutral Ir(ⁱPr-PN^HP)H₃ or Ir(ⁱPr-PN^HP)H₂Cl precatalysts show no, or poor and unselective, activity respectively at 298 K in 1,2-F₂C₆H₄ solution. In contrast, addition of [NMeH₃][BAr^F₄] (Ar^F = 3,5-(CF₃)₂C₆H₃) to Ir(ⁱPr-PN^HP)H₃ immediately starts catalysis, suggesting that a cationic catalytic manifold operates. Consistent with this, independently synthesized cationic precatalysts are active (tested between 0.5 and 2.0 mol % loading) producing poly(N-methylaminoborane) with M_n ∼ 40,000 g/mol, Đ ∼1.5, i.e., dihydrogen/dihydride, [Ir(ⁱPr-PN^HP)(H)₂(H₂)][BAr^F₄]; σ-amine-borane [Ir(ⁱPr-PN^HP)(H)₂(H₃B·NMe₃)][BAr^F₄]; and [Ir(ⁱPr-PN^HP)(H)₂(NMeH₂)][BAr^F₄]. Density functional theory (DFT) calculations probe hydride exchange processes in two of these complexes and also show that the barrier to amine-borane dehydrogenation is lower (22.5 kcal/mol) for the cationic system compared with the neutral system (24.3 kcal/mol). The calculations show that the dehydrogenation proceeds via an inner-sphere process without metal–ligand cooperativity, and this is supported experimentally by N–Me substituted [Ir(ⁱPr-PN^MeP)(H)₂(H₃B·NMe₃)][BAr^F₄] being an active catalyst. Key to the lower barrier calculated for the cationic system is the outer-sphere coordination of an additional H₃B·NMeH₂ with the N–H group of the ligand. Experimentally, kinetic studies indicate a complex reaction manifold that shows pronounced deceleratory temporal profiles. As supported by speciation and DFT studies, a key observation is that deprotonation of [Ir(ⁱPr-N^HP)(H)₂(H₂)][BAr^F₄], formed upon amine-borane dehydrogenation, by the slow in situ formation of NMeH₂ (via B–N bond cleavage), results in the formation of essentially inactive Ir(ⁱPr-PN^HP)H₃, with a coproduct of [NMeH₃]⁺/[H₂B(NMeH₂)₂]⁺. While reprotonation of Ir(ⁱPr-PN^HP)H₃ results in a return to the cationic cycle, it is proposed, supported by doping experiments, that reprotonation is attenuated by entrainment of the [NMeH₃]⁺/[H₂B(NMeH₂)₂]⁺/catalyst in insoluble polyaminoborane. The role of [NMeH₃]⁺/[H₂B(NMeH₂)]⁺ as chain control agents is also noted.

Efficient Piezoelectric Energy Harvesting from a Discrete Hybrid Bismuth Bromide Ferroelectric Templated by Phosphonium Cation

Bismuth containing hybrid molecular ferroelectrics are receiving tremendous attention in recent years owing to their stable and non-toxic composition. However, these perovskite-like structures are primarily limited to ammonium cations. Herein, we report a new phosphonium based discrete perovskite-like hybrid ferroelectric with a formula [Me(Ph)₃ P]₃ [Bi₂ Br₉ ] (MTPBB) and its mechanical energy harvesting capability. The Polarization-Electric field (P-E) measurements resulted in a well-defined ferroelectric hysteresis loop with a remnant polarization value of 2.1 μC cm^-2 . Piezoresponse force microscopy experiments enabled visualization of the ferroelectric domain structure and evaluation of the piezoelectric strain coefficient (d₃₃ ) for an MTPBB single crystal and thin film sample. Furthermore, flexible devices incorporating MTPBB in polydimethylsiloxane (PDMS) matrix at various concentrations were fabricated and explored for their mechanical energy harvesting properties. The champion device with 20 wt % of MTPBB in PDMS rendered a maximum peak-to-peak open-circuit voltage of 22.9 V and a maximum power density of 7 μW cm^-2 at an optimal load of 4 MΩ. Moreover, the potential of MTPBB-based devices in low power electronics was demonstrated by storing the harvested energy in various electrolytic capacitors.

A Biodegradable and Recyclable Piezoelectric Sensor Based on a Molecular Ferroelectric Embedded in a Bacterial Cellulose Hydrogel

Currently, various electronic devices make our life more and more safe, healthy, and comfortable, but at the same time, they produce a large amount of nondegradable and nonrecyclable electronic waste that threatens our environment. In this work, we explore an environmentally friendly and flexible mechanical sensor that is biodegradable and recyclable. The sensor consists of a bacterial cellulose (BC) hydrogel as the matrix and imidazolium perchlorate (ImClO₄) molecular ferroelectric as the functional element, the hybrid of which possesses a high sensitivity of 4 mV kPa^-1 and a wide operational range from 0.2 to 31.25 kPa, outperforming those of most devices based on conventional functional biomaterials. Moreover, the BC hydrogel can be fully degraded into glucose and oligosaccharides, while ImClO₄ can be recyclable and reused for the same devices, leaving no environmentally hazardous electronic waste.

Piezoelectric energy harvesting of a bismuth halide perovskite stabilised by chiral ammonium cations

A chiral Bi(iii) 1D-perovskite {[sCH(MePh)(Me)NH3][BiBr5]}n was synthesized and shown to exhibit piezoelectric polarization. Flexible polymer composites of it were prepared and utilized for the fabrication of nanogenerator devices.

Homogeneous catalysis with polyhydride complexes

This review analyzes the role of transition metal polyhydrides as homogeneous catalysts for organic reactions. Discussed reactions involve nearly every main organic functional group.

Controlled Synthesis of Well-Defined Polyaminoboranes on Scale Using a Robust and Efficient Catalyst

The air tolerant precatalyst, [Rh(L)(NBD)]Cl ([1]Cl) [L = κ³-(ⁱPr₂PCH₂CH₂)₂NH, NBD = norbornadiene], mediates the selective synthesis of N-methylpolyaminoborane, (H₂BNMeH)_n, by dehydropolymerization of H₃B·NMeH₂. Kinetic, speciation, and DFT studies show an induction period in which the active catalyst, Rh(L)H₃ (3), forms, which sits as an outer-sphere adduct 3·H₃BNMeH₂ as the resting state. At the end of catalysis, dormant Rh(L)H₂Cl (2) is formed. Reaction of 2 with H₃B·NMeH₂ returns 3, alongside the proposed formation of boronium [H₂B(NMeH₂)₂]Cl. Aided by isotopic labeling, Eyring analysis, and DFT calculations, a mechanism is proposed in which the cooperative "PNHP" ligand templates dehydrogenation, releasing H₂B═NMeH (ΔG^‡_calc = 19.6 kcal mol^-1). H₂B═NMeH is proposed to undergo rapid, low barrier, head-to-tail chain propagation for which 3 is the catalyst/initiator. A high molecular weight polymer is formed that is relatively insensitive to catalyst loading (M_n ∼71 000 g mol^-1; Đ, of ∼ 1.6). The molecular weight can be controlled using [H₂B(NMe₂H)₂]Cl as a chain transfer agent, M_n = 37 900-78 100 g mol^-1. This polymerization is suggested to arise from an ensemble of processes (catalyst speciation, dehydrogenation, propagation, chain transfer) that are geared around the concentration of H₃B·NMeH₂. TGA and DSC thermal analysis of polymer produced on scale (10 g, 0.01 mol % [1]Cl) show a processing window that allows for melt extrusion of polyaminoborane strands, as well as hot pressing, drop casting, and electrospray deposition. By variation of conditions in the latter, smooth or porous microstructured films or spherical polyaminoboranes beads (∼100 nm) result.

Ferroelectricity and Piezoelectric Energy Harvesting of Hybrid A2BX4-Type Halogenocuprates Stabilized by Phosphonium Cations

Perovskite-structured compounds containing organic cations and inorganic anions have gained prominence as materials for next-generation electronic and energy devices. Hybrid materials possessing ferro- and piezoelectric properties are in recent focus for mechanical energy harvesting (nanogenerator) applications. Here, we report the ferroelectric behavior of A₂BX₄-type halogenocuprate materials supported by heteroleptic phosphonium cations. These lead-free discrete Cu(II) halides [Ph₃MeP]₂[CuCl₄] (1) and [Ph₃MeP]₂[CuBr₄] (2) exhibit a remnant polarization (P _r) of 17.16 and 26.02 μC cm^-2, respectively, at room temperature. Furthermore, flexible polymer films were prepared with various weight percentage (wt %) compositions of 1 in thermoplastic polyurethane (TPU) and studied for mechanical energy harvesting applications. A highest peak-to-peak voltage output of 25 V and power density of 14.1 μW cm^-2 were obtained for the optimal 15 wt % 1-TPU composite film. The obtained output voltages were utilized for charging a 100 μF electrolytic capacitor that reaches its maximum charging point within 30 s with sizable stored energies and accumulated charges.

The Mechanism of Piezocatalysis: Energy Band Theory or Screening Charge Effect?

Piezocatalysis, a newly emerging catalysis technology that relies on the piezopotential and piezoelectric properties of the catalysts, is attracting unprecedented research enthusiasm for applications in energy conversion, organic synthesis, and environmental remediation. Despite the rapid development in the past three years, the mechanism of piezocatalysis is still under debate. A fundamental understanding of the working principles of this technology should enable the future design and optimization of piezocatalysts. Herein, we provide an overview of the two popular theories used to explain the observed piezocatalysis: energy band theory and screening charge effect. A comprehensive discussion and clarification of the differences, relevance, evidence, and contradiction of the two mechanisms are provided. Finally, challenges and perspectives for future mechanistic studies are highlighted. Hopefully, this Review can help readers gain a better understanding of piezocatalysis and enable its application in their own research.

A Fully Biodegradable Ferroelectric Skin Sensor from Edible Porcine Skin Gelatine

High-performance biodegradable electronic devices are being investigated to address the global electronic waste problem. In this work, a fully biodegradable ferroelectric nanogenerator-driven skin sensor with ultrasensitive bimodal sensing capability based on edible porcine skin gelatine is demonstrated. The microstructure and molecular engineering of gelatine induces polarization confinement that gives rise the ferroelectric properties, resulting in a piezoelectric coefficient (d33) of ≈24 pC N-1 and pyroelectric coefficient of ≈13 µC m-2K-1, which are 6 and 11.8 times higher, respectively, than those of the conventional planar gelatine. The ferroelectric gelatine skin sensor has exceptionally high pressure sensitivity (≈41 mV Pa-1) and the lowest detection limit of pressure (≈0.005 Pa) and temperature (≈0.04 K) ever reported for ferroelectric sensors. In proof-of-concept tests, this device is able to sense the spatially resolved pressure, temperature, and surface texture of an unknown object, demonstrating potential for robotic skins and wearable electronics with zero waste footprint.