The Assembly and Jamming of Nanoparticle Surfactants at Liquid-Liquid Interfaces

Thermal Welding of Liquids

Welding of thermoplastics is a common practice in many industrial sectors, but it has yet to be realized with fluids. Here, the thermal welding of liquids by using the assembly and jamming of nanoparticle surfactants (NPSs) at liquid-liquid interfaces is reported. By fine-tuning the dynamic interaction strength within NPSs, the interfacial activity of NPSs, as well as the binding energy of NPSs to the interface can be precisely controlled, leading to a dynamic exchange of NPSs, maximizing the reduction in the interfacial energy. With NPSs jammed at the interface, the structures of liquids can be manipulated to complex geometries by applying an external force and, due to the temperature responsiveness of NPSs, when bringing liquids into contact and heating the system, welding of liquids can be achieved. This work provides a straightforward strategy for the construction of modular all-liquid fluidics, opening up numerous opportunities in fields like biotechnology, healthcare, and materials science.

Amphiphilic Heterografted Molecular Bottlebrushes with Tertiary Amine-Containing Side Chains as Efficient and Robust pH-Responsive Emulsifiers

By combining the unique characteristics of molecular bottlebrushes (MBBs) and the properties of stimuli-responsive polymers, we show that MBBs with randomly grafted poly(n-butyl acrylate) and pH-responsive poly(2-(N,N-diethylamino)ethyl methacrylate) (PDEAEMA) side chains are efficient and robust pH-responsive emulsifiers. Water-in-toluene emulsions were formed at pH 4.0 and disrupted by increasing the pH to 10.0. The emulsion generation and disruption was reversible over the ten cycles investigated, and the bottlebrushes remained intact. The exceptional emulsion stability stemmed from the high interfacial binding energy of MBBs, imparted by their large molecular size and Janus architecture at the interface, as evidenced by the interfacial jamming and wrinkling of the assemblies upon reducing the interfacial area. At pH 10.0, PDEAEMA became water-insoluble, and the MBBs desorbed from the interface, causing de-emulsification. Consequently, we have shown that the judicious design of MBBs can generate properties of particle emulsifiers from their large size, while the responsiveness of the MBBs enables more potential applications.

Structuring liquids through solvent-assisted interfacial association of oppositely charged polyelectrolytes and amphiphiles

HYPOTHESIS

Sculpting liquids into different shapes is usually based on the interfacial interactions of functionalized nanoparticles or polymers with specific ligands, leading to exciting material properties due to the combination of the mobility of liquid components with the solid-like characteristic of the arrested liquid/liquid interface. There is an intense interest in novel structured liquids produced from simple compounds with versatile application potentials. Complexes of oppositely charged commercial polyelectrolytes and traditional aliphatic surfactants are good candidates for this goal since they reveal rich structural features and could adsorb at various interfaces. However, they have not been applied yet for structuring liquids.

EXPERIMENTS

The interfacial interactions and film formation between aqueous sodium poly(styrene) sulfonate solutions (NaPSS) and hexadecylamine (HDA) solutions in various alkanols were investigated by surface tension measurements and ATR-IR spectroscopy. 3D printing experiments also assessed the robustness of the formed films.

FINDINGS

Arrested fatty alcohol/water interfaces were formed due to the interfacial association of NaPSS, HDA, and alkanol molecules, which also act as cosurfactants in the surface region. These solid films enable the synthesis of temperature-sensitive all-in-liquid constructs and offer alternatives to bulk polyion/mixed surfactant assemblies prepared earlier through numerous synthesis steps.

Membrane and Lumen-Compartmentalized Polymersomes for Biocatalysis and Cell Mimics

Compartmentalization is a crucial feature of a natural cell, manifested in cell membrane and inner lumen. Inspired by the cellular structure, multicompartment polymersomes (MCPs), including membrane-compartmentalized polymersomes and lumen-compartmentalized polymersomes (polymersomes-in-polymersomes), have aroused great expectations for biological applications such as biocatalysis and cell mimics in the past decades. Compared with traditional polymersomes, MCPs have advantages in encapsulating multiple enzymes separately for multistep enzymatic cascade reactions. In this review, first, the design principles and preparation methods of membrane-compartmentalized and lumen-compartmentalized polymersomes are summarized. Next, recent advances of MCPs as nanoreactors and cell mimics to mimic subcellular organelles or artificial cells are discussed. Finally, the future research directions of MCPs are prospected.

Liquid-Liquid Interfacial Nanoarchitectonics

Science in the small world has become a crucial key that has the potential to revolutionize materials technology. This trend is embodied in the postnanotechnology concept of nanoarchitectonics. The goal of nanoarchitectonics is to create bio-like functional structures, in which self-organized and hierarchical structures are working efficiently. Liquid-liquid interface like environments such as cell membrane surface are indispensable for the expression of biological functions through the accumulation and organization of functional materials. From this viewpoint, it is necessary to reconsider the liquid-liquid interface as a medium where nanoarchitectonics can play an active role. In this review, liquid-liquid interfacial nanoarchitectonics is classified by component materials such as organic, inorganic, carbon, and bio, and recent research examples are discussed. Examples discussed in this paper include molecular aggregates, supramolecular polymers, conductive polymers film, crystal-like capsules, block copolymer assemblies, covalent organic framework (COF) films, complex crystals, inorganic nanosheets, colloidosomes, fullerene assemblies, all-carbon π-conjugated graphite nanosheets, carbon nanoskins and fullerphene thin films at liquid-liquid interfaces. Furthermore, at the liquid-liquid interface using perfluorocarbons and aqueous phases, cell differentiation controls are discussed with the self-assembled structure of biomaterials. The significance of liquid-liquid interfacial nanoarchitectonics in the future development of materials will then be discussed.

All-oil Constructs Stabilized by Cellulose Nanocrystal Surfactants

Constructing all-oil systems with desired geometries and responsiveness would produce a new class of reconfigurable materials that can be used for applications that are not compatible with water or aqueous systems, a fascinating goal to achieve but severely limited by the lack of surfactants. Here, we demonstrate an efficient strategy to stabilize oil-oil interfaces by using the co-assembly between the cellulose nanocrystal and amine-functionalized polyhedral oligomeric silsesquioxane (POSS-NH₂). Cellulose nanocrystal surfactants (CNCSs) form and assemble in situ at the interface, showing significantly enhanced binding energy and acid-dependent interfacial activity. When CNCSs jam at the interface, a robust assembly with exceptional mechanical properties can be achieved, allowing the 3D printing of all-oil devices on demand. Using CNCSs as emulsifiers, oil-in-oil high internal phase emulsions can be prepared by one-step homogenization and, when used as templates, porous materials that require water-sensitive monomers can be synthesized. These results open a new platform for stabilizing and structuring all-oil systems, providing numerous applications for microreactors, encapsulation, delivery, and tissue engineering scaffolds.

Frontally polymerized foams: thermodynamic and kinetical aspects of front hindrance by particles

Frontal polymerization (FP) is a solvent-free, energy-efficient process where a self-propagating polymerization reaction with a characteristic sharp temperature gradient at the front head propagates through the resin to provide the curing conditions. It relies on the enthalpic balance, which spreads the reaction to unreacted resin in the neighborhood. Therefore, the FP is sensitive to the presence of non-reactive volumes, such as boundaries, fillers, or other additives, that retain heat from the front but produce no enthalpy in return. On the other hand, the front's high temperature could be used to initiate other processes, such as foaming, incorporating them into a simple single-step fabrication procedure. This study used silica particles of two different sizes (14 nm and 200-300 nm) in an epoxy-based FP foam as a representative filler to probe the constraints imposed by non-reactive additives. The presence of particles visibly hindered the front propagation, increased the foam density and even corrupted the frontal regime in some cases. We show that preheating or chemical composition changes are viable approaches to address the fillers' adverse effects. Furthermore, we present evidence that the reduced reaction enthalpy caused by silica nanoparticles, was balanced by the lower heat capacity of our model system. At the same time, the front hindrance was attributed to changes in reaction kinetics and the heat distribution around the front. These results set up essential narratives for the design and practical applications of frontally polymerized foams with non-reactive fillers.

Molecular nanoarchitectonics: unification of nanotechnology and molecular/materials science

The development of nanotechnology has provided an opportunity to integrate a wide range of phenomena and disciplines from the atomic scale, the molecular scale, and the nanoscale into materials. Nanoarchitectonics as a post-nanotechnology concept is a methodology for developing functional material systems using units such as atoms, molecules, and nanomaterials. Especially, molecular nanoarchitectonics has been strongly promoted recently by incorporating nanotechnological methods into organic synthesis. Examples of research that have attracted attention include the direct observation of organic synthesis processes at the molecular level with high resolution, and the control of organic syntheses with probe microscope tips. These can also be considered as starting points for nanoarchitectonics. In this review, these examples of molecular nanoarchitectonics are introduced, and future prospects of nanoarchitectonics are discussed. The fusion of basic science and the application of practical functional materials will complete materials chemistry for everything.

Deep Learning-Based Multicapturer SERS Platform on Plasmonic Nanocube Metasurfaces for Multiplex Detection of Organophosphorus Pesticides in Environmental Water

In situ rapid detection of contaminants in environmental water is crucial for protecting the ecological environment and human health; however, it is always hindered by the complexity of sample matrices, trace content, and unknown species. Herein, we demonstrate a deep learning-based multicapturer surface-enhanced Raman scattering (SERS) platform on plasmonic nanocube metasurfaces for multiplex determination of organophosphorus pesticides (OPPs) residues. Poly(vinylpyrrolidone), 4-mercaptobenzoic acid, and l-cysteine are assembled on Ag nanocubes (AgNCs) and act as capturers to chemically define OPPs. Meanwhile, the OPPs-captured AgNCs efficiently close the interparticle distance and generate plasmonic metasurfaces, guaranteeing ultrasensitive and reproducible SERS analysis. Furthermore, by strategically combining all capturer-OPP SERS spectra, comprehensive "combined-SERS spectra" are reconstructed to enhance spectral variations of each OPP. Based on the combined-SERS spectra, a deep learning model is trained to predict OPPs, which significantly improve the qualitative and quantitative analysis accuracy. We successfully identified multiple OPPs in farmland, river, and fishpond water using this strategy. The whole detection procedure requires only 30 min, including sampling, SERS measurements, and deep learning analyses. This combination of a multicapturer SERS platform with the deep learning algorithm creates a rapid and reliable analytical strategy for multiplex detection of target molecules, providing a potential paradigm shift for environment-related research.

Supramolecular Interfaces and Reconfigurable Liquids Derived from Cucurbit[7]uril Surfactants

Nanoparticle surfactants (NPSs) offer a powerful means to stabilize the oil-water interface and construct all-liquid devices with advanced functions. However, as the nanoparticle size decreases to molecular-scale, the binding energy of the NPS to the interface reduces significantly, leading to a dynamic adsorption of NPS and "liquid-like" state of the interfacial assemblies. Here, by using the host-guest recognition between a water-soluble small molecule, cucurbit[7]uril (CB[7]) and an oil-soluble polymer ligand, methyl viologen-terminated polystyrene, a supramolecular NPS model, termed CB[7] surfactant, is described. CB[7] surfactants form and assemble rapidly at the oil-water interface, generating an elastic film with excellent mechanical properties. The binding energy of CB[7] surfactant to the interface is sufficiently high to hold it in a jammed state, transforming the interfacial assemblies from a "liquid-like" to "solid-like" state, enabling the structuring of liquids. With CB[7] surfactants as the emulsifier, O/W, W/O and O/W/O emulsions can be prepared in one step. Owing to the guest-competitive responsiveness of CB[7] surfactants, the assembly/disassembly and jamming/unjamming of CB[7] surfactants can be well controlled, leading to the reconfiguration of all-liquid constructs.