Color-Tunable Dual-Mode Organic Afterglow from Classical Aggregation-Caused Quenching Compounds for White-Light-Manipulated Anti-Counterfeiting

Large Capacity of Data Storage and Information Encryption in Optical Encoder Disk by Integrating Phase Angle and Time Lock Based on Luminescence Metal Nanoclusters

The traditional "matrix" symbol patterns from the luminescence materials are mainly involved in a 2D plane, which seriously limits the information security and storage capacity. Here, a novel strategy is designed to extend two additional dimensions into a 2D plane by integrating time-gated response and phase angle changes of luminescent patterns. The strong orange fluorescence assemblies in an optical encoder disk are obtained after adding metal ions (Zn2+ or Al3+) and ammonia into copper nanoclusters (CuNCs) mainly due to aggregation-induced emission (AIE) behavior. The number of CuNCs-based aggregates is closely related to rotating angle changes. On the contrary, these aggregates can be reversibly dissembled upon exposing to adenosine triphosphate (ATP) in concomitant with their luminescence quenching. Their different quenching rates are on-demand controlled by the coordination reaction kinetics between ATP and metal ions in different pH value, which is conducive to the design of a series of time-locked information. The encoding patterns comprehensively utilize the static and dynamic characteristics of materials by rotating the phase angle at the specific time. The phase angle and time double locks is added into 2D plane to form a 4D storage models, which realizes higher-level information encryption and larger data storage capacity.

White light-excited organic room-temperature phosphorescence for improved in vivo bioimaging

Organic phosphorescence materials offer significant advantages for bioimaging applications. However, most of these materials are excited exclusively by ultraviolet (UV) light, which poses risks to living organisms. Herein, six donor-acceptor-type compounds incorporating triazine groups are designed as guests within doped systems. White-light excitable phosphorescent guests enable doped materials to show efficient afterglow under white-light excitation. By leveraging the ability of white-light to penetrate biological tissues, a bioimaging mode in which the materials are first concentrated within the organism and then excited was developed, yielding superior imaging effects compared with the traditional method in which materials are first excited and then concentrated. Furthermore, these materials are applied in imaging diagnosis of atherosclerosis plaques (male Apoe-/- mice) and intestinal diseases (female BALB/c-nude mice), as well as in navigation for in situ liver tumor surgery (female BALB/c-nude mice), achieving excellent imaging outcomes. This work addresses the limitations of phosphorescent materials that rely on UV-light, significantly enhancing their potential for practical applications in clinical imaging.

Achieving High-Performance Organic Long Persistent Luminescence Materials via Manipulation of Radical Cation Stability

Organic long persistent luminescence (OLPL) materials, with their hour-long afterglow, hold great promise across numerous applications, yet their performance lags behind that of inorganic counterparts. A deeper understanding of the underlying photophysical mechanisms, particularly the effective control of radical intermediates, is essential for developing high-performance OLPL materials; while systematic studies on the intrinsic stability of radical intermediates and their impact on OLPL performance remain scarce. Here biphenyl groups is introduced into a luminophore-matrix-donor three-component OLPL system. By varying substituents at the ortho-position of the biphenyl groups, the stability of radical cations is systematically modulated, and their influence on OLPL properties is investigated. Combined experimental results and theoretical calculations reveal that increased flexibility of the biphenyl bond and adjustable conformations lead to higher stability of radical cations, thereby significantly enhancing OLPL performance. Based on this understanding, a luminophore with two biphenyl groups is designed to successfully achieve remarkable afterglow brightness close to inorganic Sr2Al14O25/Eu2+, Dy3+ materials. Furthermore, these OLPL materials exhibit time-encoded afterglow properties and promising applications in advanced anti-counterfeiting, as well as background-independent bioimaging functions. This work not only provides a novel strategy for constructing high-performance OLPL materials but also lays a foundation for their widespread application in various fields.

Long-chain crosslinker-induced patterning on an elastic polymer film for robust and reversible information encryption/decryption

While reversible information encryption and decryption are readily achievable with hydrogels, this process presents a significant challenge when applied to elastic polymer films. This is due to the inherent chemical stability of anhydrous polymer films which significantly increases the difficulty of information writing. In this study, we propose a solvent-free radical polymerization method for chemical patterning on the elastic film of poly(styrene-butadiene-styrene) (SBS). Unlike short chain crosslinkers-induced patterning, which increases the brittleness of the film, the long-chain crosslinkers are chemically bonded with the chains of SBS. This not only enhances the mechanical stability of film, but also improves its softness and robustness (the strength increases 1.8 times and the toughness increases 2.3 times), thereby greatly extending its durability for information encryption and decryption. When patterned with a photomask, the crosslinked regions maintain transparency upon acetone absorption, while the non-crosslinked regions become opaque due to an acetone-induced phase change. Upon removal of acetone, these opaque regions can be restored to transparency. Compared with hydrogels liable to water loss and deformation, the patterned films show greater stability, retaining pattern encryption/decryption functions after 30 days in a natural environment without special storage. The rate of this phase transition is directly related to the degree of crosslinking. Therefore, by adjusting the degree of crosslinking, the patterned films can undergo multistage encryption/decryption in response to acetone, providing a promising method for information security and storage.

Ultralong Room Temperature Phosphorescence through Both Space Confinement and Long-Range Charge Migration

Doping guest materials into host materials with a confined space to suppress nonradiative decay is an effective strategy for achieving room-temperature phosphorescence (RTP). However, constructing host-guest doped materials with ultralong RTP (URTP) is still challenging. Herein, by embedding three coumarin derivatives into boric acid via one-step heat treatment, the URTP material with an afterglow lasting up to 60 s, a phosphorescence lifetime of 1.59 s, and a quantum yield of 18.14% was successfully prepared. Experimental results show that the dense 3D boron oxide network formed after heat treatment, along with the B-O covalent bonds and O→B coordination bonds between the host and guest, effectively suppresses nonradiative transitions through both physical and chemical confinement. More importantly, the oxygen vacancy defects formed in the doped material during heat treatment, combined with the charge-separated states generated in the guest molecules upon irradiation, together facilitated the long-range charge migration process. In addition, the charge recombination is accompanied by long-lived phosphorescence emission. Finally, the prepared URTP materials exhibit potential applications in the encryption and decryption of information in security fields.

Thermal Modulation of Exciton Recombination for High-Temperature Ultra-Long Afterglow

Developing smart materials with tunable high-temperature afterglow (HTA) luminescence remains a formidable challenge. This study presents a metal-free doping system using boric acid as matrix and polycyclic aromatic hydrocarbons as dopants. This composition achieves dynamically tunable afterglow combining a bright blue HTA lasting for over ten seconds even at 150 °C and an ultra-long yellow room-temperature phosphorescence below 110 °C. The observed HTA is attributed to the thermally released exciton recombination within the dopant molecules, which shows excellent temperature tolerance compared to traditional triplet related phosphorescence and thermally activated delayed fluorescence. The planarity of dopants is extensively investigated playing a pivotal role in modulating Dexter electron transfer (ET) for capturing released electrons and thereby affecting the overall performance of tunable HTA. This work provides an efficient and universal doping strategy to engineer tunable HTA through the synergistic action of thermally releasing electrons, Dexter ET and exciton recombination.

Recent Advances in Thermally Activated Delayed Fluorescence-Based Organic Afterglow Materials

Thermally activated delayed fluorescence (TADF)-based materials are attracting widespread attention for different applications owing to their ability of harvesting both singlet and triplet excitons without noble metals in their structures. As compared to the conventional fluorescence and room-temperature phosphorescence pathways, TADF originates from the reverse intersystem crossing process from the excited triplet state (T1) to the singlet state (S1). Therefore, TADF emitters enabling activated and long lifetime T1 excitons are potential candidates for generating long-lived afterglow emission, an effect that can still be observed for a while by the naked eye after the removal of the excitation light source. Recently, TADF-based organic afterglow materials featuring high photoluminescence quantum yields and long lifetimes above 100 ms under ambient conditions, have emerged for advanced information security, high-contrast biological imaging, optoelectronic devices, and intelligent sensors, whereas the related systematic review is still lacking. Herein, the recent progress in TADF-based organic afterglow materials is summarized and an overview of the photophysical mechanism, design strategies, and the performances for relevant applications is given. In addition, the challenge and perspective of this area are given at the end of the review.

[(2-Dimesitylboryl)phenyl]ethynyl-Substituted [2.2]Paracyclophane Exhibiting Circularly Polarized Luminescence in Both Solution and Solid-State

Developing a new type of circularly polarized luminescent active small organic molecule that combines high fluorescence quantum yield and luminescence dissymmetric factor in both solution and solid state is highly challenging but promising. In this context, we designed and synthesized a unique triarylborane-based [2.2]paracyclophane derivative, m-BPhANPh2-Cp, in which an electron-accepting [(2-dimesitylboryl)phenyl]ethynyl group and an electron-donating N,N-diphenylamino group are introduced into two different benzene rings of [2.2]paracyclophane. Owing to the electronic effect of these two substituents, this compound can display charge-transfer emission with large Stokes shifts (∆υ = 4.23 - 8.20 × 103 cm-1) and fair quantum yields (ΦF = 0.15 - 0.37) in solutions. In addition, this compound can emit strong blue fluorescence in the solid state with quantum yields that are even much higher than in solution (ΦF up to 0.64 in powder and spin-coated film). Moreover, the enantiomeric forms of m-BPhANPh2-Cp can show strong CPL signals in both dilute solution and solid state with |glum|s up to 9.6 × 10-3 and 5.4 × 10-3, respectively. Thus, it is possible to achieve tunable CPL from blue to yellow in solution with high BCPLs ranging from 56.7 to 26.6 M-1 cm-1 and intense blue CPL combing high ΦF and |glum| in the solid state.

Intrinsic Narrowband Blue Phosphorescent Materials and Their Applications in 3D Printed Self-monitoring Microfluidic Chips

Organic room-temperature phosphorescent (RTP) materials, especially with narrowband emission properties, exhibit great potential for applications in display and sensing, but have been seldom reported. Herein, a rare example of the intrinsic narrowband blue RTP material is fabricated and reported. A series of indolo[3,2,1-kl]phenothiazine derivatives, named Cphpz, 1O-Cphpz, and 2O-Cphpz, are designed and synthesized. Due to their relatively rigid structures, these three compounds showed deep blue narrowband emissions ranging from 396 to 434 nm with the full width at half maximum (FWHM) of 31, 26, and 31 nm, respectively. To the delight, compound 2O-Cphpz displayed intrinsic narrowband blue RTP at 448 nm with FWHM of 36 nm and a long-lived lifetime of 1.08 s in hydroxyethyl acrylate and acrylic acid matrix. Photophysical studies, single crystal analyses, and TD-DFT calculations are performed to elucidate further the relationships between molecular structures and the narrowband blue RTP properties. Meanwhile, because the narrowband blue RTP is highly sensitive to humidity, a visualizing droplet path optical microfluidic chip is efficiently fabricated through the digital light processing 3D printing.This work provides a rare example and a reliable strategy to realize narrowband blue RTP and further expand their applications in self-monitoring 3D printed structures.

Visible-light-excited organic room temperature phosphorescence

Purely organic room temperature phosphorescence (RTP) materials have evoked considerable attention owing to their fantastic optical properties and broad application prospects. However, most of the reported organic RTP materials can be only excited by UV light, leading to accelerated photoaging of organic phosphors and severe lesions of organisms under excitation. In contrast to UV light, visible light (380-780 nm) has much lower phototoxicity, deeper penetrability and easier accessibility, which make visible-light-excited RTP materials more favorable for practical uses, especially for life-related applications. Although it remains greatly challenging to construct visible-light-excited RTP materials, impressive progress has been made with the rapid development of this field. Herein, we systematically outline the significant progress achieved in visible-light-excited RTP materials, including the design and construction strategies, unique properties, underlying mechanisms and their vital applications. In the final section, we highlight the current challenges and research perspectives for suggesting future studies of visible-light-excited RTP materials.

Hierarchical Dual-Mode Efficient Tunable Afterglow via J-Aggregates in Single-Phosphor-Doped Polymer

The development of polymer-based persistent luminescence materials with color-tunable organic afterglow and multiple responses is highly desirable for applications in anti-counterfeiting, flexible displays, and data-storage. However, achieving efficient persistent luminescence from a single-phosphor system with multiple responses remains a challenging task. Herein, by doping 9H-pyrido[3,4-b]indole (PI2) into an amorphous polyacrylamide matrix, a hierarchical dual-mode emission system is developed, which exhibits color-tunable afterglow due to excitation-, temperature-, and humidity-dependence. Notably, the coexistence of the isolated state and J-aggregate state of the guest molecule not only provides an excitation-dependent afterglow color, but also leads to a hierarchical temperature-dependent afterglow color resulting from different thermally activated delayed fluorescence (TADF) and ultralong organic phosphorescence (UOP) behaviors of the isolated and aggregated states. The complex responsiveness based on the hierarchical dual-mode emission can serve for security features through inkjet printing and ink-writing. These findings may provide further insight into the regulated persistent luminescence by isolated and aggregated phosphors in doped polymer systems and expand the scope of stimuli-responsive organic afterglow materials for broader applications.

Ultrahigh-Temperature Long-Persistent Luminescence from B2O3-Confined Polycyclic Aromatic Compounds

Organic molecules and polymers have recently been intensively explored for afterglow materials owing to their low cost and flexible design. However, they normally fail to generate long-persistent luminescence at elevated temperatures, mostly due to the fast deactivation of triplet excited states. Here, we report that polycyclic aromatic compounds (PACs) individually confined in a B2O3 crystalloid emit long-persistent luminescence at high temperatures up to 400 °C. This is facilely accomplished by dispersing a series of aromatic derivatives in an aqueous solution of boric acid, followed by drying, melting, and dehydrating. The resulting highly rigid and thermostable B2O3 crystalloid network provides a matched ultrastrong confinement effect and completely restricts the vibration and rotation of the molecularly distributed PACs even at ultrahigh temperatures and thereby prevents the nonradiative dissipation of triplet excitons and promotes the generation of ultrahigh-temperature long-persistent luminescence. The afterglow colors are responsive to both temperature and time, spanning from ultraviolet to near-infrared regions over a wide temperature range, which is substantially modulated by the subtle balance of phosphorescence and thermally activated delayed fluorescence. These features favor the creation of advanced afterglow materials for visual 3D temperature probing, anticounterfeiting, and data encryption in extreme environments.

Dual-Mechanism Design Strategy for High-Efficiency and Long-Lived Organic Afterglow Materials

Organic room-temperature phosphorescence (RTP) and afterglow materials hold great potential for various applications, but there remain inherent trade-offs between the afterglow efficiency and the lifetime. Here, we propose a dual-mechanism design strategy, leveraging the RTP or thermally activated delayed fluorescence (TADF) mechanism for a high afterglow efficiency and the organic long-persistent luminescence (OLPL) mechanism for a prolonged afterglow duration. The intramolecular charge transfer (ICT)-type difluoroboron β-diketonate molecules with a large S1 dipole moment are doped as the luminescent component into the organic matrix with a large dipole moment, and a series of TADF-type afterglow materials can be achieved with an afterglow efficiency of up to 88.7% and an afterglow lifetime of 200 ms. To prolong the afterglow duration, an electron donor is introduced as the third component to generate traps and facilitate charge separation. The obtained materials exhibit a dual afterglow mechanism, first exhibiting a TADF/RTP afterglow with an afterglow efficiency of up to 50.9%, followed by an hours-long OLPL afterglow emission with an afterglow efficiency of up to 13.1%. Further investigations reveal that an appropriate heavy-atom effect can facilitate the intersystem crossing process, which can promote the charge separation process and thus improve the OLPL afterglow performance. Additionally, rare-earth upconversion materials are introduced into OLPL materials to enable their near-infrared excitation properties, showcasing their potential applications in bioimaging.

Highly stable color-tunable organic long-persistent luminescence from a single-component exciplex copolymer for in vitro antibacterial

Developing exciplex-based organic long-persistent luminescence (OLPL) materials with high stability is very important but remains a formidable challenge in a single-component system. Here, we report a facile strategy to achieve highly stable OLPL in an amorphous exciplex copolymer system via through-space charge transfer (TSCT). The copolymer composed of electron donor and acceptor units can not only exhibit effective TSCT for intra/intermolecular exciplex emission but also construct a rigid environment to isolate oxygen and suppress non-radiative decay, thereby enabling stable exciplex-based OLPL emission with color-tunable feature for more than 100 h under ambient conditions. These single-component OLPL copolymers demonstrate robust antibacterial activity against Escherichia coli under visible light irradiation. These results provide a solid example to exploit highly stable exciplex-based OLPL in polymers, shedding light on how the TSCT mechanism may potentially contribute to OLPL in a single-component molecular system and broadening the scope of OLPL applications.

Edible Long-Afterglow Photoluminescent Materials for Bioimaging

Confining luminophores into modified hydrophilic matrices or polymers is a straightforward and widely used approach for afterglow bioimaging. However, the afterglow quantum yield and lifetime of the related material remain unsatisfactory, severely limiting the using effect especially for deep-tissue time-resolved imaging. This fact largely stems from the dilemma between material biocompatibility and the quenching effect of water environment. Herein an in situ metathesis promoted doping strategy is presented, namely, mixing ≈10-3 weight ratio of organic-emitter multicarboxylates with inorganic salt reactants, followed by metathesis reactions to prepare a series of hydrophilic but water-insoluble organic-inorganic doping afterglow materials. This strategy leads to the formation of edible long-afterglow photoluminescent materials with superior biocompatibility and excellent bioimaging effect. The phosphorescence quantum yield of the materials can reach dozens of percent (the highest case: 66.24%), together with the photoluminescent lifetime lasting for coupes of seconds. Specifically, a long-afterglow barium meal formed by coronene salt emitter and BaSO4 matrix is applied into animal experiments by gavage, and bright stomach afterglow imaging is observed by instruments or mobile phone after ceasing the photoexcitation with deep tissue penetration. This strategy allows a flexible dosage of the materials during bioimaging, facilitating the development of real-time probing and theranostic technology.

Achieving pure room temperature phosphorescence (RTP) in phenoselenazine-based organic emitters through synergism among heavy atom effect, enhanced n → π* transitions and magnified electron coupling by the A-D-A molecular configuration

The weak spin-orbit coupling (SOC) in metal-free organic molecules poses a challenge in achieving phosphorescence emission. To attain pure phosphorescence in RTP organic emitters, a promising molecular design concept has been proposed. This involves incorporating n → π* transitions and leveraging the heavy atomic effect within the spin-orbit charge transfer-induced intersystem crossing (SOCT-ISC) mechanism of bipolar molecules. Following this design concept, two bipolar metal-free organic molecules (PhSeB and PhSeDB) with donor-acceptor (D-A) and acceptor-donor-acceptor (A-D-A) configurations have been synthesized. When the molecular configuration changes from D-A to A-D-A, PhSeDB exhibits stronger electron coupling and n → π* transitions, which can further enhance the spin-orbit coupling (SOC) together with the heave atom effect from the selenium atom. By the advanced synergism among enhanced n → π* transitions, heavy atom effect and magnified electron coupling to efficiently promote phosphorescence emission, PhSeDB can achieve pure RTP emission in both the solution and doped solid film. Thanks to the higher spin-orbit coupling matrix elements (SOCMEs) for T1 ↔ S0, PhSeDB attains the highest phosphorescence quantum yield (ca. 0.78) among all the RTP organic emitters reported. Consequently, the purely organic phosphorescent light-emitting diodes (POPLEDs) based on PhSeDB achieve the highest external quantum efficiencies of 18.2% and luminance of 3000 cd m-2. These encouraging results underscore the significant potential of this innovative molecular design concept for highly efficient POPLEDs.

Supermolecular Confined Silicon Phosphorescence Nanoprobes for Time-Resolved Hypoxic Imaging Analysis

Room temperature phosphorescence (RTP) nanoprobes play crucial roles in hypoxia imaging due to their high signal-to-background ratio (SBR) in the time domain. However, synthesizing RTP probes in aqueous media with a small size and high quantum yield remains challenging for intracellular hypoxic imaging up to present. Herein, aqueous RTP nanoprobes consisting of naphthalene anhydride derivatives, cucurbit[7]uril (CB[7]), and organosilicon are reported via supermolecular confined methods. Benefiting from the noncovalent confinement of CB[7] and hydrolysis reactions of organosilicon, such small-sized RTP nanoprobes (5-10 nm) exhibit inherent tunable phosphorescence (from 400 to 680 nm) with microsecond second lifetimes (up to ∼158.7 μs) and high quantum yield (up to ∼30%). The as-prepared RTP nanoprobes illustrate excellent intracellular hypoxia responsibility in a broad range from ∼0.1 to 21% oxygen concentrations. Compared to traditional fluorescence mode, the SBR value (∼108.69) of microsecond-range time-resolved in vitro imaging is up to 2.26 times greater in severe hypoxia (<0.1% O2), offering opportunities for precision imaging analysis in a hypoxic environment.

Room-Temperature Phosphorescence Materials Featuring Triplet Hybrid Local Charge Transfer Emission

Room-temperature phosphorescence materials have found important applications in dissolved oxygen sensing, temperature monitoring, anticounterfeiting, etc., because of their prolonged phosphorescence lifetime. However, the known systems mainly utilize the triplet local excited state emission, which is generally less sensitive to microenvironment perturbation. In this work, we designed a series of 4-phenyl-1,8-naphthalimide (NMI) derivatives containing different numbers of carbazole (Cz) units (denoted as NMI-Cz, NMI-2Cz, and NMI-3Cz). Steady state and time-resolved spectroscopy studies determined that the compounds undergo intramolecular through-space charge transfer in solution, yielding a triplet hybrid local charge transfer state. Room-temperature phosphorescence emission was observed in compound-doped poly(methyl methacrylate) thin films upon ammonia treatment. Interestingly, emission from different films exhibited different persistence times. We believe a film-based, time-resolved luminescent ammonia sensor could be developed by making a device of the emissive films as fabricated.

Enabling Highly Robust Full-Color Ultralong Room-Temperature Phosphorescence and Stable White Organic Afterglow from Polycyclic Aromatic Hydrocarbons

In this work, full-color and stable white organic afterglow materials with outstanding water, organic solvents, and temperature resistances have been developed for the first time by embedding the selected polycyclic aromatic hydrocarbons into melamine-formaldehyde polymer via solution polymerization. The afterglow quantum yields and lifetimes of the resulting polymer films were up to 22.7 % and 4.83 s, respectively, under ambient conditions. For the coronene-doped sample, its afterglow color could be linearly tuned between yellow and blue by adjusting the temperature, and it could still emit an intense blue afterglow with a lifetime of 0.68 s at 440 K. Moreover, the films showed a bright and stable white afterglow at 370 K with a lifetime of 2.80 s and maintained an excellent afterglow performance after soaking in water and organic solvents for more than 150 days. In addition, the application potential of the polymer films in information encryption and anti-counterfeiting was also demonstrated.

Aqueous Solution Enhanced Room Temperature Phosphorescence through Coordination-Induced Structural Rigidity

Achieving aqueous solution enhanced room temperature phosphorescence (RTP) is critical for the applications of RTP materials in solution phase, but which faces a great challenge. Herein, for the first time, a strategy of coordination-induced structural rigidity is proposed to achieve enhanced quantum efficiency of aluminum/scandium-doped phosphorescent microcubes (Al/Sc-PMCs) in aqueous solution. The Al/Sc-PMCs in a dry state exhibit a nearly invisible blue RTP. However, they emit a strong RTP emission in aqueous solution with a RTP intensity increase of up to 22.16-times, which is opposite to common solution-quenched RTP. The RTP enhancement mechanism is attributed to the abundant metal sites (Al3+ and Sc3+ ions) on the Al/Sc-PMCs surface that can tightly combine with water molecules through the strong coordination. Subsequently, these coordinated water molecules as the bridging agent can bind with surface groups by hydrogen bonding interaction, thereby rigidifying chemical groups and inhibiting their motions, resulting in the transition from the nonradiative decay to the radiative decay, which greatly enhances the RTP efficiency of the Al/Sc-PMCs. This work not only develops a coordination rigidity strategy to enhance RTP intensity in aqueous solution, but also constructs a phosphorescent probe to achieve reliable and accurate determination of analyte in complex biological matrices.

Visible Light-Activated Ultralong-Lived Triplet Excitons of Carbon Dots for White-Light Manipulated Anti-Counterfeiting

Room temperature phosphorescence (RTP) has emerged as an interesting but rare phenomenon with multiple potential applications in anti-counterfeiting, optoelectronic devices, and biosensing. Nevertheless, the pursuit of ultralong lifetimes of RTP under visible light excitation presents a significant challenge. Here, new phosphorescent materials that can be excited by visible light with record-long lifetimes are demonstrated, realized through embedding nitrogen doped carbon dots (N-CDs) into a poly(vinyl alcohol) (PVA) film. The RTP lifetime of the N-CDs@PVA film is remarkably extended to 2.1 s excited by 420 nm, representing the highest recorded value for visible light-excited phosphorescent materials. Theoretical and experimental studies reveal that the robust hydrogen bonding interactions can effectively reduce the non-radiative decay rate and radiative transition rate of triplet excitons, thus dramatically prolong the phosphorescence lifetime. Notably, the RTP emission of N-CDs@PVA film can also be activated by easily accessible low-power white-light-emitting diode. More significantly, the practical applications of the N-CDs@PVA film in state-of-the-art anti-counterfeiting security and optical information storage domains are further demonstrated. This research offers exciting opportunities for utilizing visible light-activated ultralong-lived RTP systems in a wide range of promising applications.

Dopant-Matrix Afterglow Systems: Manipulation of Room-Temperature Phosphorescence/Thermally Activated Delayed Fluorescence Afterglow Mechanism via Mismatch/Match of Intermolecular Charge Transfer between Dopants and Matrices

Dopant-matrix organic afterglow materials exhibit ease of fabrication and intriguing functions in diverse fields. However, a deep and comprehensive understanding of their photophysical behaviors remains elusive. Here we report manipulation of a room-temperature phosphorescence/thermally activated delayed fluorescence (RTP/TADF) afterglow mechanism via the mismatch/match of intermolecular charge transfer between dopants and matrices. When dispersed in inert crystalline matrices, the luminescent dopants show RTP lifetimes up to 2 s. Interestingly, when suitable organic matrices are selected, the resultant dopant-matrix materials display a TADF-type afterglow under ambient conditions due to the formation of dopant-matrix intermolecular charge transfer complexes. Detailed studies reveal that reverse intersystem crossing from dopants' T1 states to charge transfer complexes' S1 states, which features a moderate kRISC of 101-102 s-1, is responsible for the emergence of a TADF-type organic afterglow in rigid crystalline matrices. Such less reported delicate photophysics reveals a new aspect of the excited state property in dopant-matrix afterglow systems.

Color-Tunable Dual-Mode Organic Afterglow for White-Light Emission and Information Encryption Based on Carbazole Doping

Dual-mode emission materials, combining phosphorescence and delayed fluorescence, offer promising opportunities for white-light afterglow. However, the delayed fluorescence lifetime is usually significantly shorter than that of phosphorescence, limiting the duration of white-light emission. In this study, a carbazole-based host-guest system that can be activated by both ultraviolet (UV) and visible light is reported to achieve balanced phosphorescence and delayed fluorescence, resulting in a long-lived white-light afterglow. Our study demonstrated the critical role of a charge transfer state in the afterglow mechanism, where the charge separation and recombination process directly determined the lifetime of afterglow. Simultaneously, an efficient reversed intersystem crossing process was obtained between the singlet and triplet charge transfer states, which facilitating the delayed fluorescence properties of host-guest system. As a result, delayed fluorescence lifetime was successfully prolonged to approach that of phosphorescence. This work presents a delayed fluorescence lifetime improvement strategy via doping method to realize durable white-light afterglow.

Multi-stimulus Room Temperature Phosphorescent Polymers Sensitive to Light and Acid cyclically with Energy Transfer

The stimulus-responsive room temperature phosphorescent (RTP) materials have endowed wide potential applications. In this work, by introducing naphthalene and spiropyran (SP) into polyacrylamide as the energy donor and acceptor respectively, a new kind of brilliant dynamic color-tunable amorphous copolymers were prepared with good stability and processibility, and afterglow emissions from green to orange in response to the stimulus of photo or acid, thanks to multi-responsibility of SP and the energy transfer between naphthalene and SP. In addition to the deeply exploring of the inherent mechanism, these copolymers have been successfully applied in dynamically controllable applications in information protection and delivery.

A narrow-band deep-blue MRTADF-type organic afterglow emitter

We report a multi-resonant thermally activated delayed fluorescent (MRTADF) afterglow emitter with unprecedented long emission lifetime > 100 ms, full-width at half-maximum < 40 nm, and deep-blue emission color of CIEy at 0.048. Such emitters remain rarely achieved and would show potential applications in multiplexed bioimaging and high-density information encryption.

Theoretical exploration of the bromine substitution effect and hydrostatic pressure responsive mechanism for room temperature phosphorescence

Stimulus-responsive organic room temperature phosphorescence (RTP) materials with long lifetimes, high efficiencies and tunable emission properties have broad applications. However, the amounts and species of efficient RTP materials are far from meeting the requirements and the inner stimulus-responsive mechanisms are unclear. Therefore, developing efficient stimulus-responsive RTP materials is highly desired and the relationship between the molecular structures and luminescent properties of RTP materials needs to be clarified. Based on this point, the influences of different substitution sites of Br on the luminescent properties of RTP molecules are studied by the combined quantum mechanics and molecular mechanics (QM/MM) coupled with thermal vibration correlation function (TVCF) theory. Moreover, the hydrostatic pressure effect on the efficiencies and lifetimes is explored and the inner mechanism is illustrated. The results show that, for the exciton conversion process, the o-substitution molecule possesses the largest spin-orbit coupling (SOC) value (〈S1|Ĥso|T1〉) in the intersystem crossing (ISC) process and this is conducive to the accumulation of triplet excitons. However, for the energy consumption process, the large SOC value (〈S0|Ĥso|T1〉) for the p-substitution molecule brings a fast non-radiative decay rate, and the small SOC value for the m-substitution molecule generates a decreased non-radiative decay rate which is helpful for realizing long lifetime emission. Keeping with this perspective, the conflict between high exciton utilization and long RTP emission needs to be balanced rather than enhancing the SOC effect by simply adding heavy atoms in RTP systems. Through regulating the molecular stacking modes by the hydrostatic pressure effect, the inner stimulus-responsive mechanism is revealed. The data of 〈S1|Ĥso|T1〉 in the ISC process remain almost unchanged, while 〈S0|Ĥso|T1〉 values and transition dipole moments are sensitive to the hydrostatic pressure. Under 1 GPa, the RTP molecule achieves a maximum efficiency (81.17%) and long lifetime (2.72 ms) with the smallest SOC and decreased non-radiative decay rate. To our knowledge, this is the first time that the hydrostatic pressure responsive mechanism for RTP molecules is revealed from a theoretical perspective, and the relationships between molecular structures and luminescent properties are detected. Our work could facilitate the development of high performance RTP molecules and expand their applications in multilevel information encryption.

Achieving Stable and Switchable Ultralong Room-Temperature Phosphorescence from Polymer-Based Luminescent Materials with Three-Dimensional Covalent Networks for Light-Manipulated Anticounterfeiting

Developing polymer-based organic afterglow materials with switchable ultralong organic phosphorescence (UOP) that are insensitive to moisture remains challenging. Herein, two organic luminogens, BBCC and BBCS, were synthesized by attaching 7H-benzo[c]carbazole (BBC) to benzophenone and diphenyl sulfone. These two emitters were employed as guest molecules and doped into epoxy polymers (EPs), which were constructed by in situ polymerization to achieve polymer materials BBCC-EP and BBCS-EP. It was found that BBCC-EP and BBCS-EP films exhibited significant photoactivated UOP properties. After light irradiation, they could produce a conspicuous organic afterglow with phosphorescence quantum yields and lifetimes up to 5.35% and 1.91 s, respectively. Meanwhile, BBCS-EP also presented photochromic characteristics. Upon thermal annealing, the UOP could be turned off, and the polymer films recovered to their pristine state, showing switchable organic afterglow. In addition, BBCC-EP and BBCS-EP displayed excellent water resistance and still produced obvious UOP after soaking in water for 4 weeks. Inspired by the unique photoactivated UOP and photochromic properties, BBCC and BBCS in the mixtures of diglycidyl ether of bisphenol A (DGEBA) and 1,3-propanediamine were employed as security inks for light-controlled multilevel anticounterfeiting. This work may provide helpful guidance for developing photostimuli-responsive polymer-based organic afterglow materials, especially those with stable UOP under ambient conditions.

How Matrixes Influence Room Temperature Ultralong Organic Phosphorescence: 4-Dimethylaminopyridine vs Carbazole Derivative

How matrixes influence room temperature ultralong organic phosphorescence (RTUOP) in the doping systems is a fundamental question. In this study, we construct guest-matrix doping phosphorescence systems by using the derivatives (ISO2N-2, ISO2BCz-1, and ISO2BCz-2) of three phosphorescence units (N-2, BCz-1, and BCz-2) and two matrixes (ISO2Cz and DMAP) and systematically investigate their RTUOP properties. Firstly, the intrinsic phosphorescence properties of three guest molecules were studied in solution, in the pure powder state, and in PMMA film. Then, the guest molecules were doped into the two matrixes with increasing weight ratio. To our surprise, all of the doping systems in DMAP feature a longer lifetime but weaker phosphorescence intensity, while all of the doping systems in ISO2Cz exhibit a shorter lifetime but higher phosphorescence intensity. According to the single-crystal analysis of the two matrixes, resemblant chemical structures of the guests and ISO2Cz enable them to approach each other and interact with each other via a variety of interactions, thus facilitating the occurrence of charge separation (CS) and charge recombination (CR). The HOMO-LUMO energy levels of the guests match well with the ones of ISO2Cz, which also significantly promotes the efficiency of the CS and CR process. To our best knowledge, this work is a systematic study on how matrixes influence the RTUOP of guest-matrix doping systems and may give deep insight into the development of organic phosphorescence.

Stimulus-Responsive Organic Phosphorescence Materials Based on Small Molecular Host-Guest Doped Systems

Small molecular host-guest doped materials exhibit superiority toward high-efficiency room-temperature phosphorescence (RTP) materials due to their structural design diversity and ease of preparation. Dynamic RTP materials display excellent characteristics, such as good reversibility, quick response, and tunable luminescence ability, making them applicable to various cutting-edge technologies. Herein, we summarize the advances in host-guest doped dynamic RTP materials that respond to external and internal stimuli and present some insights into the molecular design strategies and underlying mechanisms. Subsequently, specific viewpoints are described regarding this promising field for the development of dynamic RTP materials. This Perspective is highly beneficial for future intelligent applications of dynamic RTP systems.