Regulating the Synergistic Effect in Bimetallic Two-Dimensional Polymer Oxygen Evolution Reaction Catalysts by Adjusting the Coupling Strength Between Metal Centers

Modulating the Oxygen Evolution Reaction Activity of Bimetallic 2D Polymers by Substituent Effects

An understanding of the structure-activity relationship is crucial for the design and synthesis of high-performance oxygen evolution reaction (OER) catalysts. In this study, the substituent effect of Co─Ni two-dimensional polymer (2DP) on OER is investigated. A series of monolayer bimetallic Co─Ni─MF─R─2DP (─R = ─H, ─CF3, ─COOCH3, ─OCH3, ─N(CH3)2) catalysts with accurately defined structures and different electron-donating or electron-withdrawing substituents is selected as the research object. This selection provides an ideal model platform to isolate their intrinsic activity from factors affecting apparent activity, such as electrical conductivity and loading property. It allows for an accurate exploration of the substituent effect on OER in bimetallic materials. The results indicate that the OER activity follows the order CoTAPP─Ni─MF─N(CH3)2─2DP > CoTAPP─Ni─MF─OCH3─2DP > CoTAPP─Ni─MF─H─2DP > CoTAPP─Ni─MF─COOCH3─2DP > CoTAPP─Ni─MF─CF3─2DP, which suggests that the catalyst activity is positively correlated with the electron-donating property of the substituents. This work provides an insight into the design of high-performance OER catalysts by the substituent effect.

Efficient Ammonia Electrosynthesis from Pure Nitrate Reduction via Tuning Bimetallic Sites in Redox-Active Covalent Organic Frameworks

Electrocatalytic nitrate reduction reaction (NITRR) represents a promising approach for ammonia synthesis, but existing application has been constrained by the complex proton-coupled electron transfer and the sluggish kinetics induced by various intermediates. Herein, we synthesized a series of metalized covalent organic frameworks: NiTP-MTAPP MCOFs (M = 2H, Co, Cu, and Fe), based on dual redox-active centers: thiophene-substituted Ni-bis(dithiolene) ligand-Ni[C2S2(C4H2SCHO)2]2 and metallic porphyrin. Through regulating the adsorption and desorption of species at the catalytic sites, we have identified the optimal NITRR electrocatalyst: NiTP-CoTAPP MCOF, which achieved the highest faradaic efficiency (FE) of approximately 85.6% at -0.8 V (vs. RHE) in pure nitrate solution, with an impressive yield rate of 160.2 mmol h-1 g-1 cat. The generation of active hydrogen at [NiS4] sites achieved dynamic equilibrium with the timely hydrogenation reaction at CoN4 sites, effectively suppressing the hydrogen evolution reaction. Moreover, the incorporation of thiophene (TP) groups and metal ions facilitates charge transfer. Density functional theory (DFT) calculations demonstrated the reduction in energy barriers at different catalytic sites. The CoN4-NiS4 system exhibited the optimal adsorption-to-desorption capability and the lowest energy barrier (0.58 eV) for the rate-determining step (*NO → *HNO), which is supported by the moderate d-band center and Bader charge value.

Rational Design of Diatomic Active Sites for Elucidating Oxygen Evolution Reaction Performance Trends

Diatomic catalysts, especially those with heteronuclear active sites, have recently attracted significant attention for their advantages over single-atom catalysts in reactions with relatively high energy barrier, e.g. oxygen evolution reaction. Rational design and synthesis of heteronuclear diatomic catalysts are of immense significance but have so far been plagued by the lack of a definitive correlation between structure and catalytic properties. Here, we report macrocyclic precursor constrained strategy to fabricate series of transition metal (MT, Ni, Co, Fe, Mn, or Cu)-noble (MN, Ir or Ru) centers in carbon material. One notable performance trend is observed in the order of Cu-MN Collapse

Key Words

• Diatomic catalysts
• Macrocyclic precursor constrained strategy
• Oxygen evolution reaction
• Performance descriptor
• Transition-noble metal centers

Collapse

MESH Headings Collapse

Grants

• 22172170 National Natural Science Foundation of China
• 2022YFA1504002 National Key R&D Program of China
• 2023YFB3813001 National Key R&D Program of China
• XDB0600300 Strategic Priority Research Program of the Chinese Academy of Sciences
• 22F22358 JSPS-KAKENHI
• 22ZR1471600 Science and Technology Commission of Shanghai Municipality

Collapse

Affiliation(s)

Nanfeng Xu Laboratory of Advanced Spectro-electrochemistry and Li-ion Batteries, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, China
Yuxiang Jin State Key Lab of High-Performance Ceramics and Superfine microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, 200050, China
Qiunan Liu The Institute of Scientific and Industrial Research (ISIR-SANKEN), Osaka University, Osaka, 567-0047, Japan
Meng Yu State Key Laboratory of Advanced Chemical Power Sources, College of Chemistry, Nankai University, Tianjin, 300071, China
Xiao Wang State Key Laboratory of Advanced Chemical Power Sources, College of Chemistry, Nankai University, Tianjin, 300071, China
Chao Wang Laboratory of Advanced Spectro-electrochemistry and Li-ion Batteries, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, China
Wei Tu Clean Nano Energy Center, State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao, 066004, China
Zhirong Zhang Hefei National Research Center for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei, 230026, China
Zhigang Geng Hefei National Research Center for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei, 230026, China
Kazu Suenaga The Institute of Scientific and Industrial Research (ISIR-SANKEN), Osaka University, Osaka, 567-0047, Japan
Fangyi Cheng State Key Laboratory of Advanced Chemical Power Sources, College of Chemistry, Nankai University, Tianjin, 300071, China
Erhong Song State Key Lab of High-Performance Ceramics and Superfine microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, 200050, China
Zhangquan Peng Laboratory of Advanced Spectro-electrochemistry and Li-ion Batteries, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, China
Junyuan Xu Laboratory of Advanced Spectro-electrochemistry and Li-ion Batteries, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, China

Collapse

Recent advances in two-dimensional polymers: synthesis, assembly and energy-related applications

Two-dimensional polymers (2DPs) are a class of 2D crystalline polymer materials with definite structures, which have outstanding physical-chemical and electronic properties. They cleverly link organic building units through strong covalent bonds and can construct functional 2DPs through reasonable design and selection of different monomer units to meet various application requirements. As promising energy materials, 2DPs have developed rapidly in recent years. This review first introduces the basic overview of 2DPs, such as their historical development, inherent 2D characteristics and diversified topological advantages, followed by the summary of the typical 2DP synthesis methods recently (including "top-down" and "bottom-up" methods). The latest research progress in assembly and processing of 2DPs and the energy-related applications in energy storage and conversion are also discussed. Finally, we summarize and prospect the current research status, existing challenges, and future research directions of 2DPs.

Schiff Base Complex Cocatalyst with Coordinatively Unsaturated Cobalt Sites for Photoelectrochemical Water Oxidation

Integrating inorganic oxygen evolution cocatalysts (OECs) with photoanodes is regarded as an available strategy to increase the photogenerated charge utilization for accelerated water oxidation kinetics. Nevertheless, most widely used transition metal (oxyhydr)oxides OECs suffer from inevitable charge recombination at photoanode/OECs interfaces and underabundant catalytic active sites. Herein, a cobalt-organic complex with microflower-like features (denoted as MF) was constructed by coordination of Schiff base ligands and Co2+ metal ions and then decorated on porous BiVO4 employed as photoanodes for photoelectrochemical (PEC) water oxidation. The as-synthesized BiVO4/MF photoanode achieves a photocurrent density of 4.38 mA cm-2 and at 1.23 VRHE in 0.5 M Na2SO4 electrolyte under simulated 1 sun illumination, over approximately 5.48 times larger than that of BiVO4 counterpart, and exhibits a 120 mV cathodic shift of onset potential with outstanding photostability. Systematic characterizations reveal that the improved PEC efficiency is mainly attributed to the well-designed coordinatively unsaturated Co2+ sites, which not only serve as powerful photohole extraction engines along reversed interfacial Co-O-Bi bonds to promote charge transfer across the BiVO4/complex interface but also act as reaction active centers by accelerating surface water oxidation kinetics. This work provides new insights for designing highly effective OECs for PEC water oxidation.

Nitrogen Plasma Activates CoMn-Layered Double Hydroxides for Superior Electrochemical Oxygen Evolution

Bimetallic layered double hydroxide is considered an ideal electrocatalytic material. However, due to the poor electrical conductivity of the bimetallic layered structure, obtaining highly active and stable catalysts through facile regulation strategies remains a great challenge. Herein, we use a simple corrosion strategy and nitrogen plasma technology to convert cobalt-based metal-organic frameworks into nitrogen-doped CoMn bimetallic layered double hydroxides (CoMn-LDH). Under the condition of regulating the local coordination environment of the catalytic active site and the presence of rich oxygen vacancy defects, N@CoMn-LDH/CC generates a low overpotential of 219 mV at 10 mA cm-2, which exceeds that of the commercial RuO2 catalyst. Density functional theory calculation shows that nitrogen doping improves the adsorption energy of the Mn site for oxygen evolution intermediates and reduces the reaction energy barrier of the Co site. Meanwhile, experiments and theoretical calculations verify that the mechanism of nitrogen doping regulating the oxygen evolution reaction (OER) follows the lattice oxygen oxidation mechanism, avoiding the collapse of the structure caused by catalyst reconstruction, thus improving the stability of oxygen evolution. This work provides a new simple strategy for the preparation of catalysts for a superior electrocatalytic oxygen evolution reaction.

A novel cobalt(ii) acetate complex bearing lutidine ligand: a promising electrocatalyst for oxygen evolution reaction

Developing cost-effective electrocatalysts using earth-abundant metal as an alternative to expensive precious metal catalyst remains a key challenge for researchers. Several strategies are being researched/tested for making low-cost transition metal complexes with controlled electron-density and coordination flexibility around the metal center to enhance their catalytic activity. Herein, we report a novel lutidine coordinated cobalt(ii) acetate complex [(3,5-lutidine)2Co(OAc)2(H2O)2] (1) as a promising electrocatalyst for oxygen evolution reaction (OER). Complex 1 was characterized by FT-IR, elemental analysis, and single crystal X-ray diffraction data. The structure optimization of complex 1 was also done using DFT calculation and the obtained geometrical parameters were found to be in good agreement with the parameters obtained from the solid state structure obtained through single crystal X-ray diffraction data. Further, the molecular electrostatic potential (MEP) maps analysis of complex 1 observed electron rich centers that were found to be in agreement with the solid-state structure. It was understood that the coordination of lutidine as a Lewis base and acetate moiety as a flexible ligand will provide more coordination flexibility around the metal center to facilitate the catalytic reaction. Further, the electron rich centers around metal center will also support the enhancement of their catalytic activity. Complex 1 shows impressive OER activity, even better than the state-of-the-art IrO2 catalyst, in terms of turnover frequency (TOF: 0.05) and onset potential (1.50 V vs. RHE). The TOF for complex 1 is two and half times higher, while the onset potential is ca. 20 mV lower, than the benchmark IrO2 catalyst studied under identical conditions.

Highly enhanced electrocatalytic OER activity of water-coordinated copper complexes: effect of lattice water and bridging ligand

The use of metal-organic compounds as electrocatalysts for water splitting reactions has gained increased attention; however, a fundamental understanding of the structural requirement for effective catalytic activity is still limited. Herein, we synthesized water-coordinated mono and bimetallic copper complexes (CuPz-H2O·H2O, CuPz-H2O, CuBipy-H2O·H2O, and CuMorph-H2O) with varied intermetallic spacing (pyrazine/4,4'-bipyridine) and explored the structure-dependent oxygen evolution reaction (OER) activity in alkaline medium. Single crystal structural studies revealed water-coordinated monometallic complexes (CuMorph-H2O) and bimetallic complexes (CuPz-H2O·H2O, CuPz-H2O, CuBipy-H2O·H2O). Further, CuPz-H2O·H2O and CuBipy-H2O·H2O contained lattice water along with coordinated water. Interestingly, the bimetallic copper complex with lattice water and shorter interspacing between the metal centres (CuPz-H2O·H2O) showed strong OER activity and required an overpotential of 228 mV to produce a benchmark current density of 10 mA cm-2. Bimetallic copper complex (CuPz-H2O) without lattice water but the same intermetallic spacing and bimetallic complex with increased interspacing but with lattice water (CuBipy-H2O·H2O) exhibited relatively lower OER activity. CuPz-H2O and CuBipy-H2O·H2O required an overpotential of 236 and 256 mA cm-2, respectively. Monometallic CuMorph-H2O showed the lowest OER activity (overpotential 271 mV) compared to bimetallic complexes. The low Tafel slope and charge transfer resistance of CuPz-H2O·H2O facilitated faster charge transfer kinetics at the electrode surface and supported the enhanced OER activity. The chronoamperometric studies indicated good stability of the catalyst. Overall, the present structure-electrocatalytic activity studies of copper complexes might provide structural insight for designing new efficient electrocatalysts based on metal coordination compounds.