Centimeter-Size Single Crystals of Halide Perovskite Photoferroelectric Solid Solution with Ultrahigh Pyroelectricity Boosted Photodetection

Two-Dimensional Layered Germanium Iodide Perovskite Ferroelectric Semiconductors

The discovery of ferroelectricity in two-dimensional (2D) semiconductors has opened a new and exciting chapter in next-generation electronics and spintronics due to their lattice-dimensionality-induced unique behaviors and fascinating functionalities brought by spontaneous polarization. The emerging layered halide perovskites with 2D lattices provide a great platform for generating reduced symmetry and low-dimensional ferroelectricity. Herein, inspired by the approach of reduced lattice dimensionality, a series of 2D layered germanium iodide perovskite ferroelectric semiconductors A2CsGe2I7 [where A=PA (propylammonium), BA (butylammonium) and AA (amylammonium)] was firstly developed, which demonstrates remarkable semiconducting features including narrow direct band gap (~1.8 eV) and high conductivity over 32.23 nS/cm. Emphatically, these layered germanium iodide perovskites manifest large in-plane ferroelectric polarization over ~10.0 μC/cm2, mainly attributed to the large off-centering ion displacement induced by stereo-active lone-pairs of Ge2+. More specifically, in contrast to three-dimensional ferroelectric CsGeI3, the representative 2D layered BA2CsGe2I7 manifests a superior polarization-sensitive bulk photovoltaic effect with a polarization ratio of 1.68 and high short circuit current density up to 81.25 μA/cm2, which is superior to those of reported layered halide perovskite ferroelectrics. This work provides an exciting pathway for the development of 2D ferroelectric semiconductors as well as sheds light on their further applications in photoelectronic fields.

Exploring Aqueous Solution-Processed Pseudohalide Rare-Earth Double Perovskite Ferroelectrics toward X-Ray Detection with High Sensitivity

Three-dimensional (3D) pseudohalide rare-earth double perovskites (PREDPs) have garnered significant attention for their versatile physical properties, including ferroelectricity, ferroelasticity, large piezoelectric responses, and circularly polarized luminescence. However, their potential for X-ray detection remains unexplored, and the low Curie temperature (TC) limits the performance window for PREDP ferroelectrics. Here, by applying the chemical regulation strategies involving halogen substitution on the organic cation and Rb/Cs substitution to the PREDP [(R)-M3HQ]2RbEu(NO3)6 [(R)-M3HQ=(R)-N-methyl-3-hydroxylquinuclidinium] with a low TC of 285 K, a novel 3D PREDP ferroelectric [(R)-CM3HQ]2CsEu(NO3)6 [(R)-CM3HQ=(R)-N-chloromethyl-3-hydroxylquinuclidinium] are successfully synthesized, for which the TC reaches 344 K. More importantly, such a strategy endowed [(R)-CM3HQ]2CsEu(NO3)6 with notable X-ray detection capabilities. Centimeter-sized [(R)-CM3HQ]2CsEu(NO3)6 single crystals fabricated from aqueous solutions demonstrated a sensitivity of 1307 μC Gyair -1 cm-2 and a low detectable dose rate of 152 nGyair s-1, the highest sensitivity reported for hybrid double perovskite ferroelectric detectors. This work positions PREDPs as promising candidates for the next generation of eco-friendly optoelectronic materials and also offers substantial insights into the interaction between structure, composition, and functionality in ferroelectric materials.

Pyro-phototronic Effect Enhanced Self-Powered Photoresponse in Lead-Free Hybrid Perovskite

Pyro-phototronic effect (PPE) can significantly boost the performance of hybrid perovskite (HPs) photodetectors due to the effective modulation of photogenerated charge carrier separations, transportation, and extraction. However, there are few reports on the application of PPE in lead-free HPs. Herein, a polar lead-free HP (1,3-BMACH)BiBr5 [1,3-BMACH = 1,3-bis(aminomethyl)cyclohexane] is synthesized and realized broadband self-powered photoresponse from X-rays to near-infrared (NIR) through the PPE. Particularly, this light-induced PPE in lead-free HPs breaks the limitation of the optical band gap, making them suitable for broadband self-powered photodetection. Under 405 nm illumination, compared with a purely photovoltaic system, Iphoto+pyro is boosted by 3100%, and R and D* are both enhanced by 260% after coupled PPE. It is particularly interesting that an obvious X-ray-induced PPE phenomenon is also observed, which endows (1,3-BMACH)BiBr5 with a high sensitivity of 154 μC Gy-1 cm-2 and a low detection limit of 307 nGy s-1 under the self-powered mode. The implementation of light-induced PPE from X-rays to NIR in lead-free HPs provides a new approach for constructing environmentally friendly, broadband, and self-powered optoelectronic devices in the future.

Durable Photo-Pyroelectric Detection in a Diamine-Constructed Lead-Free Hybrid Perovskite Ferroelectric

As a subcategory of pyroelectric materials, hybrid perovskite ferroelectrics possess substantial pyroelectric properties and exceptional light absorption characteristics, demonstrating significant potential in the photo-pyroelectric (PPE) detection field. Despite the significant advantages of hybrid perovskite ferroelectric materials for PPE detection, both the lead issue and the weak stability from van der Waals interactions in monoamines have hindered their further application. Here, 1D lead-free ferroelectric (BDA)SbBr5 (1, where BDA is 1,4-butanediammonium) is fabricated to achieve PPE detection. Compound 1 exhibits significant symmetry breaking attributed to the order-disorder transition of organic cations and octahedral distortions. Specifically, compound 1 enables broad-spectrum PPE detection from UV to near-infrared (377-980 nm) and further realizes switchable pyroelectric current after polarization. More importantly, the stability of the pyroelectric current is preserved without degradation over three months, attributed to the hydrogen bonding interactions of butanediamide. Further theoretical calculations of compound 1 reveal a more negative energy of formation than its monoamine homologs (BA)2SbBr5 (where BA is n-butylammonium), which is evidence of its stability. These findings highlight 1 as a promising candidate for high-stability and environmentally friendly PPE wide-spectrum detection, representing a noteworthy advancement in the ferroelectric field.

Synergistic Effect of Ionic Liquid and Embedded QDs on 2D Ferroelectric Perovskite Films with Narrow Phase Distribution for Self-Powered and Broad-Band Photodetectors

2D layered metal halide perovskites (MHPs) are a potential material for fabricating self-powered photodetectors (PDs). Nevertheless, 2D MHPs produced via solution techniques frequently exhibit multiple quantum wells, leading to notable degradation in the device performance. Besides, the wide band gap in 2D perovskites limits their potential for broad-band photodetection. Integrating narrow-band gap materials with perovskite matrices is a viable strategy for broad-band PDs. In this study, the use of methylamine acetate (MAAc) as an additive in 2D perovskite precursors can effectively control the width of the quantum wells (QWs). The amount of MAAc greatly affects the phase purity. Subsequently, PbSe QDs were embedded into the 2D perovskite matrix with a broadened absorption spectrum and no negative effects on ferroelectric properties. PM6:Y6 was combined with the hybrid ferroelectric perovskite films to create a self-powered and broad-band PD with enhanced performance due to a ferro-pyro-phototronic effect, reaching a peak responsivity of 2.4 A W-1 at 940 nm.

Pyro-Phototronic Effect Induced Circularly Polarized Light Detection with a Broadband Response

Photopyroelectric-based circularly polarized light (CPL) detection, coupling the pyro-phototronic effect and chiroptical phenomena, has provided a promising platform for high-performance CPL detectors. However, as a novel detection strategy, photopyroelectric-based CPL detection is currently restricted by the short-wave optical response, underscoring the urgent need to extend its response range. Herein, visible-to-near-infrared CPL detection induced by the pyro-phototronic effect is first realized in chiral-polar perovskites. Specifically, chiral-polar multilayered perovskites (S-BPEA)2FAPb2I7 (1-S, S-BPEA = (S)-1-4-Bromophenylethylammonium, FA = formamidinium) with spontaneous polarization shows intrinsic pyroelectric and photopyroelectric performance. Strikingly, combining its merits of the pyro-phototronic effect and intrinsic wide-spectrum spin-selective effect, chiral multilayered 1-S presents efficient photopyroelectric-based broadband CPL detection performance spanning 405-785 nm. This research first realizes photopyroelectric-based infrared CPL detection and also sheds light on developing high-performance broadband CPL detectors based on the pyro-phototronic effect in the fields of optics, optoelectronics, and spintronics.

Exploiting the Cationic Size Effect to Improve the Curie Temperature of Hybrid Perovskites Photoferroelectric Semiconductors

Ferroelectric materials with Curie temperature (Tc) below room temperature severely limit their practical applications. Although research on hybrid perovskite photoferroelectrics is ongoing, effective regulation of Tc still poses significant challenges. Herein, we utilized the cationic size effect to successfully regulate the Tc of hybrid perovskite photoferroelectric semiconductors. As the perovskitizer was replaced by a smaller-sized MA+ (methylammonium) with a larger-sized EA+ (ethylammonium), not only was the ferroelectricity of the hybrid perovskite well maintained but the Tc of (PA)2(MA)2Pb3Br10 (315 K) to (PA)2(EA)2Pb3Br10 (385 K) (PA is n-propylaminium) increased by 70 K, which was mainly due to the significant increase in the energy barriers that the system needed to overcome during the phase transition. Subsequently, we achieved efficient self-powered X-ray detection through the ferroelectric-induced bulk photovoltaic effect (BPVE) in (PA)2(EA)2Pb3Br10. The devices based on (PA)2(EA)2Pb3Br10 single crystals exhibit an outstanding sensitivity of 95 μC Gy-1 cm-2 and a low detection limit of 239 nGy s-1 at 0 V bias under X-ray radiation. This study provides an effective approach for designing and constructing high-temperature multilayer photoferroelectric semiconductors in the future.

Single Crystal Ruddlesden-Popper and Dion-Jacobson Metal Halide Perovskites for Visible Light Photodetectors: Present Status and Future Perspectives

2D metal halide perovskites (MHPs), mainly the studied Ruddlesden-Popper (RP) and Dion-Jacobson (DJ) phases, have gained enormous popularity as optoelectronic materials owing to their self-assembled multiple quantum well structures, tunable semiconducting properties, and improved structural stability compared to their bulk 3D counterparts. The performance of polycrystalline thin film devices is limited due to the formation of defects and trap states. However, as studied so far, single crystal-based devices can provide a better platform to improve device performance and investigate their fundamental properties more reliably. This Review provides the first comprehensive report on the emerging field of RP and DJ perovskite single crystals and their use in visible light photodetectors of varied device configurations. This Review structurally summarizes the 2D MHP single crystal growth methods and the parameters that control the crystal growth process. In addition, the characterization techniques used to investigate their crystal properties are discussed. The review further provides detailed insights into the working mechanisms as well as the operational performance of 2D MHP single crystal photodetector devices. In the end, to outline the present status and future directions, this Review provides a forward-looking perspective concerning the technical challenges and bottlenecks associated with the developing field of RP and DJ perovskite single crystals. Therefore, this timely review will provide a detailed overview of the fast-growing field of 2D MHP single crystal-based photodetectors as well as ignite new concepts for a wide range of applications including solar cells, photocatalysts, solar H2 production, neuromorphic bioelectronics, memory devices, etc.

Directed Assembly of Ordered Mixed-Spacer Quasi-2D Halide Perovskites through Homomeric Chains of Intermolecular Bonds

Two-dimensional (2D) halide perovskites (HPs) are of significant interest to researchers because of their natural structural frameworks and intriguing optoelectronic properties. However, the direct fabrication of ordered mixed-spacer quasi-2D HPs remains challenging. Herein, a synthetic strategy inspired by the principle of supramolecular synthons is employed for the self-assembly of a series of ordered mixed-spacer bilayered HPs. The key innovation involves the introduction of intermolecular hydrogen bonds using a bifunctional 3-aminopropionitrile cation. Three homogeneous n = 2 structures are obtained, with a subtly ordered perovskite connected by two distinct types of organic cation layers, resulting in a recurrent ABAB' stacking sequence. These three compounds exhibit attractive semiconducting properties. Moderate bandgaps in the range of 2.70 to 2.76 eV with an absorption wavelength range of 448-459 nm exhibit excellent photoelectric response. Moreover, the ordered structures facilitate excellent polarization-sensitive photodetection, with an impressive on/off ratio of 103. The response speed ranged from 298 to 381 µs, and the out-of-plane polarization-related dichroism ratio is determined to be 1.19. Such ordered mixed-spacer bilayered perovskites have not been reported. These results enrich the HPs system and play a significant role in the direct assembly of novel perovskites with ordered structures.

Coupled Kite-to-Square Distortion Transition and Physical Properties in 2D Lead Halide Perovskite

2D lead halide perovskites showcase diverse electrical and optoelectrical properties due to their adaptable structural distortion, which dictates the symmetry characteristics of the material. To accommodate the geometric shape of the cation, the inorganic layer of the 2D perovskite often undergoes specific distortions such as lead-halide bond length elongation/compression and lead atom displacement. The resultant distortion manifests as a quadrilateral shape formed by Pb atoms from four adjacent four octahedrons. The degree of distortion increases as the quadrilateral deviates further from a square shape and vice versa. This quadrilateral shape not only visually represents the magnitude of distortion but also confirms its direction. During the transition from kite to square distortion under external stimuli, the positions of the Pb atoms vividly illustrate the symmetry-breaking process, corresponding to a shift from high to low symmetry states. The electrical and optoelectronic properties, including ferroelectricity, pyroelectricity, piezoelectricity, nonlinear optical properties, and characteristics related to bulky photovoltaic effects, some of them exhibit direction dependence nature. This perspective employed a visible structural distortion approach to elucidate symmetry breaking and coupling distortion transitions with eight optoelectronic physical properties in 2D layered perovskite. We review recent research advancements and outline current challenges that help us to understand the structure-property relationship of 2D perovskite.

Modulating the ferroelectric phases in cholesteryl-based organic compounds with perfluoroalkyl tail engineering

Here, we synthesized a series of cholesteryl-based compounds, whose phases and their transformation can be modulated by temperature and the chain length of the fluoroalkyl moieties. To our knowledge, this is the first time that the phase transition could be modulated with perfluoroalkyl tail engineering in organic single-component ferroelectric crystals.

Surface Passivation to Enhance the Interfacial Pyro-Phototronic Effect for Self-Powered Photodetection Based on Perovskite Single Crystals

The interfacial pyro-phototronic effect (IPPE) presents a novel approach for improving the performance of self-powered photodetectors (PDs) based on metal halide perovskites (MHPs). The interfacial contact conditions within the Schottky junctions are crucial in facilitating the IPPE phenomenon. However, the fabrication of an ideal Schottky junction utilizing MHPs is a challenging endeavor. In this study, we present a surface passivation method aimed at enhancing the performance of self-powered photodetectors based on inverted planar perovskite structures in micro- and nanoscale metal-halide perovskite SCs. Our findings demonstrate that the incorporation of a lead halide salt with a benzene ring moiety for surface passivation leads to a substantial improvement in photoresponses by means of the IPPE. Conversely, the inclusion of an alkane chain in the salt impedes the IPPE. The underlying mechanism can be elucidated through an examination of the band structure, particularly the work function (WF) modulated by surface passivation. Consequently, this alteration affects the band bending and the built-in field (VBi) at the interface. This strategy presents a feasible and effective method for producing interfacial pyroelectricity in MHPs, thus facilitating its potential application in practical contexts such as energy conversion and infrared sensors.

Chiral-Achiral Cations Intercalation Induced Lead-Free Chiral-Polar Hybrid Perovskites Enable Self-Powered X-Ray and Ultraviolet-Visible-Near-Infrared Photo Detection

Lead halide hybrid perovskites have made great progress in direct X-ray detection and broadband photodetection, but the existence of toxic Pb and the demand for external operating voltage have severely limited their further applications and operational stability improvements. Therefore, exploring "green" lead-free hybrid perovskite that can both achieve X-ray detection and broadband photodetection without external voltage is of great importance, but remains severely challenging. Herein, using centrosymmetric (BZA)3BiI6 (1, BZA = benzylamine) as a template, a pair of chiral-polar lead-free perovskites, (BZA)2(R/S-PPA)BiI6 (2-R/S, R/S-PPA = (R/S)-1-Phenylpropylamine) are successfully obtained by introducing chiral aryl cations of (R/S)-1-Phenylpropylamine. Compared to 1, chiral-polar 2-R presents a significant irradiation-responsive bulk photovoltaic effect (BPVE) with an open circuit photovoltage of 0.4 V, which enables it with self-powered X-ray, UV-vis-NIR broadband photodetection. Specifically, 2-R device exhibits an ultralow detection limit of 18.5 nGy s-1 and excellent operational stability. Furthermore, 2-R as the first lead-free perovskite achieves significant broad-spectrum (377-940 nm) photodetection via light-induced pyroelectric effect. This work sheds light on the rational crystal reconstruction engineering and design of "green" hybrid perovskite toward high-demanded self-powered radiation detection and broadband photodetection.