Single-atom Iron Catalyst with Biomimetic Active Center to Accelerate Proton Spillover for Medical-level Electrosynthesis of H2 O2 Disinfectant

Tuning the Formation Kinetics of *OOH Intermediate with Hollow Bowl-Like Carbon by Pulsed Electroreduction for Enhanced H2O2 Production

The electrochemical synthesis of hydrogen peroxide (H2O2) via the two-electron oxygen reduction reaction (2e- ORR) is a promising alternative to the conventional anthraquinone method. However, due to local alkalinization near the catalyst surface, the restricted oxygen replenishment and insufficient activated water molecule supply limit the formation of the key *OOH intermediate. Herein, a pulsed electrocatalysis approach based on a structurally optimized S/N/O tridoped hollow carbon bowl catalyst has been proposed to overcome this challenge. In an H-type electrolytic cell, the pulsed method achieves a superior H2O2 yield rate of 55.6 mg h-1 mgcat.-1, approximately 1.6 times higher than the conventional potentiostatic method (34.2 mg h-1 mgcat.-1), while maintaining the Faradaic efficiency above 94.6%. In situ characterizations, finite element simulations, and density functional theory analyses unveil that the application of pulsed potentials mitigates the local OH- concentration, enhances the water activation and proton generation, and facilitates oxygen production within the hollow bowl-like carbon structure. These effects synergistically accelerate the formation kinetics of the *OOH intermediate by the efficient generation of *O2 and *H2O intermediates, leading to superior H2O2 yields. This work develops a strategy to tune catalytic environments for diverse catalytic applications.

Integrated Two-in-one Strategy for Efficient Neutral Hydrogen Peroxide Electrosynthesis via Phosphorous Doping in 2D Mesoporous Carbon Carriers

Herein, we demonstrate a two-in-one strategy for efficient neutral electrosynthesis of H2O2 via two-electron oxygen reduction reaction (2e- ORR), achieved by synergistically fine-modulating both the local microenvironment and electronic structure of indium (In) single atom (SA) sites. Through a series of finite elemental simulations and experimental analysis, we highlight the significant impact of phosphorous (P) doping on an optimized 2D mesoporous carbon carrier, which fosters a favorable microenvironment by improving the mass transfer and O2 enrichment, subsequently leading to an increased local pH levels. Consequently, an outstanding 2e- ORR performance is observed in neutral electrolytes, achieving over 95 % selectivity for H2O2 across a broad voltage range of 0.1 to 0.5 V vs RHE. In a flow cell, the production rate of H2O2 exceeds 22.54 mol gcat -1 h-1 while maintaining high stability at industrial-level current densities. These results are comparable to, if not better than, those achieved under alkaline conditions. Further analysis, both experimental and theoretical, indicates that the P dopant occupies the second coordination sphere of the In SA, which shows optimized OOH* binding strength for an enhanced 2e- ORR kinetic.

Noble-Metal-Free Electrocatalysts for Selective Hydrogen Peroxide Generation via Oxygen Reduction Reaction

Hydrogen peroxide (H2O2) is a versatile chemical widely used in various industries. The traditional anthraquinone method for H2O2 synthesis has environmental and safety concerns due to the use of organic solvents and hazardous by-products. The direct synthesis of H2O2 from H2 and O2 poses risks of flammability and explosion. Recently, the 2-electron oxygen reduction reaction (2e- ORR) method has emerged as a promising alternative, offering safety, environmental friendliness, and cost-effectiveness. This method utilizes gas diffusion electrodes to efficiently generate H2O2 without the need for additional dilution. In this review, we focus on the recent advancements in noble-metal-free materials for 2e- ORR electrocatalysis, which play a crucial role in the efficient production of H2O2. These materials, including transition metal compounds, macrocyclic complexes, carbon-based catalysts, framework materials, and MXenes catalysts, demonstrate significant advantages in enhancing H2O2 yield. The development of these non-precious metal catalysts can reduce costs and improve sustainability and promote the commercialization of related technologies. The review concludes with an outlook on the future trends of 2e- ORR electrocatalysts.

Employing a Zn-air/Photo-Electrochemical Cell for In Situ Generation of H2O2 for Onsite Control of Pollutants

Industrial production of hydrogen peroxide (H2O2) is energy-intensive and generates unwanted byproducts. Herein, an alternative production strategies of H2O2 are demonstrated in a Zn-air and a photoelectrochemical cell. Employing an optimally produced reduced graphene oxide (rGO) electrocatalyst@air-cathode, an impressive power density of 320 Wmgeo -2 (geo = geometric area) is achieved along with a high H2O2 production rate of 3.17 mol mgeo -2h-1 (operating potential = 0.8 V). Systematic investigations reveal the critical role of specific functional groups (viz. C─O─C, chemisorbed O2, C≐C) to be responsible for enhancing the yield of H2O2. The in situ generated superoxide (O2˙) and hydroxyl radicals (˙OH) act as oxidants to efficiently degrade onsite, a model textile dye pollutant (viz. rhodamine B) inside the Zn-air cell. Using the identical rGO as the photoelectrode in an H-type cell, the H2O2 production is remarkably enhanced under visible light illumination. Simultaneously, the onsite pollutant degradation occurs five times faster than the Zn-air cell (at the same operating potential = 0.8 V). This work opens a new paradigm for electrosynthesis, wherein an underlying redox can be utilized to synthesize industrial chemicals for onsite control of environmental pollution sustainably.

Engineering Asymmetric Electronic Structure of Co─N─C Single-Atomic Sites Toward Excellent Electrochemical H2O2 Production and Biomass Upgrading

To advance electrochemical H2O2 production and unravel catalytic mechanisms, the precise structural coordination of single-atomic M-N-C electrocatalysts is urgently required. Herein, the Co─N5 site with an asymmetric electronic configuration is constructed to boost the two-electron oxygen reduction reaction (2e- ORR) compared to symmetric Co─N4, effectively overcoming the trade-off between activity and selectivity in H2O2 production. Both experimental and theoretical analyses demonstrate that breaking the symmetry of Co─N sites promotes the activation of O2 molecules and moderates the adsorption of the key *OOH intermediate by disrupting the linear scaling relationship for intermediates adsorption. This modulation enables efficient H₂O₂ production and its effective retention for subsequent applications. As a proof of concept, Co─N5 achieves a H2O2 production rate as high as 16.1 mol gcat -1 h-1 in a flow cell, outperforming most recently reported counterparts. Furthermore, the coupling of 2e- ORR with the oxidation of cellulose-derived carbohydrates accomplishes high formic acid yields (84.1% from glucose and 62.0%-92.1% from other substrates), underpinning the sustainable electro-refinery for biomass valorization at ambient conditions. By elucidating the intrinsic relationship between 2e⁻ ORR and the asymmetry of single-atomic sites, this work paves the way for high-performance electrosynthesis.

Observation of O2 Molecules Inserting into Fe-H Bonds in a Ferrous Metal-Organic Framework

Exploring the interactions between oxygen molecules and metal sites has been a significant topic. Most previous studies concentrated on enzyme-mimicking metal sites interacting with O2 to form M-OO species, leaving the development of new types of O2-activating metal sites and novel adsorption mechanisms largely overlooked. In this study, we reported an Fe(II)-doped metal-organic framework (MOF) [Fe3Zn2H4(bibtz)3] (MAF-203, H2bibtz = 1H,1'H-5,5'-bibenzo[d][1,2,3]triazole), featuring an unprecedented tetrahedral Fe(II)HN3 site. This MOF exhibits selective adsorption behavior for O2 from air, achieving an O2/N2 separation selectivity of up to 67.1. Breakthrough experiments confirmed that MAF-203 can effectively capture O2 from the air even under a high relative humidity of 60%. X-ray absorption spectroscopy, in situ diffuse reflectance infrared Fourier transform spectra, and ab initio molecular dynamics simulations were utilized to monitor the O2 loading process on the Fe(II)HN3 site. Interestingly, O2 molecules could insert into the Fe-H bonds of the tetrahedral FeIIHN3 sites, forming FeIII-OOH species (instead of the commonly observed Fe-OO species) with an ultrahigh adsorption enthalpy of -99.2 kJ mol-1. Consequently, the O2 capture behavior of MAF-203 enables efficient electrochemical 2e- oxygen reduction for the production of H2O2 with air as the feedstock. Specifically, in a solid-state electrolyte electrolyzer without any liquid electrolyte, MAF-203 achieved selective O2 capture and continuous production of medical-grade H2O2 (3.2 wt %) solution without salts for 70 h, with performance comparable to that under pure O2 conditions. The O2 adsorption and activation mechanisms inaugurate a fresh chapter in grasping the interaction between O2 molecules and metal sites.

Tuning Proton Affinity on Co-N-C Atomic Interface to Disentangle Activity-Selectivity Trade-off in Acidic Oxygen Reduction to H2O2

In oxygen reduction reaction to H2O2 via two-electron pathway (2e- ORR), adsorption strength of oxygen-containing intermediates determines both catalytic activity and selectivity. However, it also causes activity-selectivity trade-off. Herein, we propose a novel strategy through modulating the interaction between protons and *OOH intermediates to break the activity-selectivity trade-off for highly active and selective 2e- ORR. Taking the typical cobalt-nitrogen-carbon single-atom catalyst as an example, boron heteroatoms doped into second coordination sphere of CoN4 (Co1-NBC) increase proton affinity on catalyst surface, facilitating proton attack on the former oxygen of *OOH and thereby promoting H2O2 formation. As a result, Co1-NBC simultaneously achieves prominent 2e- ORR activity and selectivity in acid with onset potential of 0.724 V vs. RHE and H2O2 selectivity of 94 %, surpassing most reported catalysts. Furthermore, Co1-NBC exhibits a remarkable H2O2 productivity of 202.7 mg cm-2 h-1 and a remarkable stability of 60 h at 200 mA cm-2 in flow cell. This work provides new insights into resolving activity-selectivity trade-off in electrocatalysis.

The steric hindrance effect of Co porphyrins promoting two-electron oxygen reduction reaction selectivity

A new Co 5,10,15,20-tetrakis(2',6'-dipivaloyloxyphenyl)porphyrin (1) with eight ester groups in all ortho and ortho' positions of phenyl groups was designed, which displayed significantly improved 2e oxygen reduction reaction (ORR) selectivity compared with a 5,10,15,20-tetrakis(para-dipivaloyloxyphenyl) porphyrin (2) without large steric groups. This work is significant to reveal the steric hindrance effect of metal porphyrins on electrocatalytic ORR selectivity.

Nature-Inspired N, O Co-Coordinated Manganese Single-Atom Catalyst for Efficient Hydrogen Peroxide Electrosynthesis

The two-electron oxygen reduction reaction (2e- ORR) is a pivotal pathway for the distributed production of hydrogen peroxide (H2O2). In nature, enzymes containing manganese (Mn) centers can convert reactive oxygen species into H2O2. However, Mn-based heterogeneous catalysts for 2e- ORR are scarcely reported. Herein, we developed a nature-inspired single-atom electrocatalyst comprising N, O co-coordinated Mn sites, utilizing carbon dots as the modulation platform (Mn CD/C). As-synthesized Mn CD/C exhibited exceptional 2e- ORR activity with an onset potential of 0.786 V and a maximum H2O2 selectivity of 95.8 %. Impressively, Mn CD/C continuously produced 0.1 M H2O2 solution at 200 mA/cm2 for 50 h in the flow cell, with negligible loss in activity and H2O2 faradaic efficiency, demonstrating practical application potential. The enhanced activity was attributed to the incorporation of Mn atomic sites into the carbon dots. Theoretical calculations revealed that the N, O co-coordinated structure, combined with abundant oxygen-containing functional groups on the carbon dots, optimized the binding strength of intermediate *OOH at the Mn sites to the apex of the catalytic activity volcano. This work illustrates that carbon dots can serve as a versatile platform for modulating the microenvironment of single-atom catalysts and for the rational design of nature-inspired catalysts.

Accelerated Proton-Coupled Electron Transfer via Engineering Palladium Sub-Nanoclusters for Scalable Electrosynthesis of Hydrogen Peroxide

Electrosynthesis of H2O2 from oxygen reduction reaction via a two-electron pathway is vital as an alternative for the energy-intensive anthraquinone process. However, this process is largely hindered in neutral and alkaline conditions due to sluggish kinetics associated with the transformation of intermediate O2* into OOH* via proton-coupled electron transfer sourced from slow water dissociation. Herein, we developed Pd sub-nanoclusters on the nickel ditelluride nanosheets (Pd SNCs/NiTe2) to enhance the performance of H2O2 electrosynthesis. The newly-developed Pd SNCs/NiTe2 exhibited a H2O2 selectivity of as high as 99 % and a positive shift of onset potential up to 0.81 V. Combined theoretical calculations and experimental studies (e.g., X-ray absorption and attenuated total reflectance-Fourier transform infrared spectra measurements) revealed that the Pd sub-nanoclusters supported by NiTe2 nanosheets efficiently reduced the energy barrier of water dissociation to generate more protons, facilitating the proton feeding kinetics. When used in a flow cell, Pd SNCs/NiTe2 cathode efficiently produced H2O2 with a maximum yield rate of 1.75 mmol h-1 cm-2 and a current efficiency of 95 % at 100 mA cm-2. Further, an accumulated H2O2 concentration of 1.43 mol L-1 was reached after 10 hours of continuous electrolysis, showing the potential for practical H2O2 electrosynthesis.

Hydrogen Peroxide Electrosynthesis via Selective Oxygen Reduction Reactions Through Interfacial Reaction Microenvironment Engineering

The electrochemical two-electron oxygen reduction reaction (2e- ORR) offers a compelling alternative for decentralized and on-site H2O2 production compared to the conventional anthraquinone process. To advance this electrosynthesis system, there is growing interest in optimizing the interfacial reaction microenvironment to boost electrocatalytic performance. This review consolidates recent advancements in reaction microenvironment engineering for the selective electrocatalytic conversion of O2 to H2O2. Starting with fundamental insights into interfacial electrocatalytic mechanisms, an overview of various strategies for constructing the favorable local reaction environment, including adjusting electrode wettability, enhancing mesoscale mass transfer, elevating local pH, incorporating electrolyte additives, and employing pulsed electrocatalysis techniques is provided. Alongside these regulation strategies, the corresponding analyses and technical remarks are also presented. Finally, a summary and outlook on critical challenges, suggesting future research directions to inspire microenvironment engineering and accelerate the practical application of H2O2 electrosynthesis is delivered.

Species mass transfer governs the selectivity of gas diffusion electrodes toward H2O2 electrosynthesis

The meticulous design of advanced electrocatalysts and their integration into gas diffusion electrode (GDE) architectures is emerging as a prominent research paradigm in the H2O2 electrosynthesis community. However, it remains perplexing that electrocatalysts and assembled GDE frequently exhibit substantial discrepancies in H2O2 selectivity during bulk electrolysis. Here, we elucidate the pivotal role of mass transfer behavior of key species (including reactants and products) beyond the intrinsic properties of the electrocatalyst in dictating electrode-scale H2O2 selectivity. This tendency becomes more pronounced in high reaction rate (current density) regimes where transport limitations are intensified. By utilizing diffusion-related parameters (DRP) of GDEs (i.e., wettability and catalyst layer thickness) as probe factors, we employ both short- and long-term electrolysis in conjunction with in-situ electrochemical reflection-absorption imaging and theoretical calculations to thoroughly investigate the impact of DRP and DRP-controlled local microenvironments on O2 and H2O2 mass transfer. The mechanistic origins of diffusion-dependent conversion selectivity at the electrode scale are unveiled accordingly. The fundamental insights gained from this study underscore the necessity of architectural innovations for mainstream hydrophobic GDEs that can synchronously optimize mass transfer of reactants and products, paving the way for next-generation GDEs in gas-consuming electroreduction scenarios.

Engineering of Single-Atomic Sites for Electro- and Photo-Catalytic H2O2 Production

Direct electro- and photo-synthesis of H2O2 through the 2e- O2 reduction reaction (ORR) and H2O oxidation reaction (WOR) offer promising alternatives for on-demand and on-site production of this chemical. Exploring robust and selective active sites is crucial for enhancing H2O2 production through these pathways. Single-atom catalysts (SACs), featuring isolated active sites on supports, possess attractive properties for promoting catalysis and unraveling catalytic mechanisms. This review first systematically summarizes significant advancements in atomic engineering of both metal and nonmetal single-atom sites for electro- and photo-catalytic 2e- ORR to H2O2, as well as the dynamic behaviors of active sites during catalytic processes. Next, the progress of single-atom sites in H2O2 production through 2e- WOR is overviewed. The effects of the local physicochemical environments on the electronic structures and catalytic behaviors of isolated sites, along with the atomic catalytic mechanism involved in these H2O2 production pathways, are discussed in detail. This work also discusses the recent applications of H2O2 in advanced chemical transformations. Finally, a perspective on the development of single-atom catalysis is highlighted, aiming to provide insights into future research on SACs for electro- and photo-synthesis of H2O2 and other advanced catalytic applications.

Biomimetic Electronic Communication of Iodine Doped Single-Atom Fe Site for Highly Active and Stable Dopamine Oxidation

Rational design of highly active and stable catalysts for dopamine oxidation is still a great challenge. Herein, inspired by the catalytic pocket of natural enzymes, an iodine (I)-doped single Fe-site catalyst (I/FeSANC) is synthesized to mimic the catalytic center of heme enzymes in both geometrical and electronic structures, aiming to enhance dopamine (DA) oxidation. Experimental studies and theoretical calculations show that electronic communication between I and FeN5 effectively modulates the electronic structure of the active site, greatly optimizing the overlap of Fe 3d and O 2p orbitals, thereby enhancing OH adsorption. In addition, the electronic communication induced by iodine doping attenuates the attack of proton hydrogen on the active center, thereby enhancing the stability of I/FeSANC. This work provides new insights into the design of highly active and stable single-atom catalysts and enhances the understanding of catalytic mechanisms for DA oxidation at the atomic scale.

Photocatalytic H2O2 production over boron-doped g-C3N4 containing coordinatively unsaturated FeOOH sites and CoOx clusters

Graphitic carbon nitride (g-C3N4) has gained increasing attention in artificial photosynthesis of H2O2, yet its performance is hindered by sluggish oxygen reduction reaction (ORR) kinetics and short excited-state electron lifetimes. Here we show a B-doped g-C3N4 (BCN) tailored with coordinatively unsaturated FeOOH and CoOx clusters for H2O2 photosynthesis from water and oxygen without sacrificial agents. The optimal material delivers a 30-fold activity enhancement compared with g-C3N4 under visible light, with a solar-to-chemical conversion efficiency of 0.75%, ranking among the forefront of reported g-C3N4-based photocatalysts. Additionally, an electron transfer efficiency reaches 34.1% for the oxygen reduction reaction as revealed by in situ microsecond transient absorption spectroscopy. Experimental and theoretical results reveal that CoOx initiates hole-water oxidation and prolongs the electron lifetime, whereas FeOOH accepts electrons and promotes oxygen activation. Intriguingly, the key to the direct one-step two-electron reaction pathway for H2O2 production lies in coordinatively unsaturated FeOOH to adjust the Pauling-type adsorption configuration of O2 to stabilize peroxide species and restrain the formation of superoxide radicals.

High-Density Atomically Dispersed Metals Activate Adjacent Nitrogen/Carbon Sites for Efficient Ammonia Electrosynthesis from Nitrate

While electrocatalytic reduction of nitrate to ammonia presents a sustainable solution for addressing both the environmental and energy issues within the nitrogen cycle, it remains a great challenge to achieve high selectivity and activity due to undesired side reactions and sluggish reaction kinetics. Here, we fabricate a series of metal-N-C catalysts that feature hierarchically ordered porous structure and high-density atomically dispersed metals (HD M1/PNC). Specifically, the as-prepared HD Fe1/PNC catalyst achieves an ammonia production rate of 21.55 mol gcat-1 h-1 that is at least 1 order of magnitude enhancement compared with that of the reported metal-N-C catalysts, while maintaining a 92.5% Faradaic efficiency when run at 500 mA cm-2 for 300 h. In addition to abundant active sites, such high performance benefits from the fact that the high-density Fe can more significantly activate the adjacent N/C sites through charge redistribution for improved water adsorption/dissociation, providing sufficient active hydrogen to Fe sites for nitrate ammoniation, compared with the low-density counterpart. This finding deepens the understanding of high-density metal-N-C materials at the atomic scale and may further be used for designing other catalysts.

Rational Design of Earth-Abundant Catalysts toward Sustainability

Catalysis is crucial for clean energy, green chemistry, and environmental remediation, but traditional methods rely on expensive and scarce precious metals. This review addresses this challenge by highlighting the promise of earth-abundant catalysts and the recent advancements in their rational design. Innovative strategies such as physics-inspired descriptors, high-throughput computational techniques, and artificial intelligence (AI)-assisted design with machine learning (ML) are explored, moving beyond time-consuming trial-and-error approaches. Additionally, biomimicry, inspired by efficient enzymes in nature, offers valuable insights. This review systematically analyses these design strategies, providing a roadmap for developing high-performance catalysts from abundant elements. Clean energy applications (water splitting, fuel cells, batteries) and green chemistry (ammonia synthesis, CO2 reduction) are targeted while delving into the fundamental principles, biomimetic approaches, and current challenges in this field. The way to a more sustainable future is paved by overcoming catalyst scarcity through rational design.

Fe-O4 Motif Activated Graphitic Carbon via Oxo-Bridge for Highly Selective H2O2 Electrosynthesis

Carbon-based materials have been utilized as effective catalysts for hydrogen peroxide electrosynthesis via two-electron oxygen reduction reaction (2e ORR), however the insufficient selectivity and productivity still hindered the further industrial applications. In this work, we report the Fe-O4 motif activated graphitic carbon material which enabled highly selective H2O2 electrosynthesis operating at high current density with excellent anti-poisoning property. In the bulk production test, the concentration of H2O2 cumulated to 8.6 % in 24 h and the corresponding production rate of 33.5 mol gcat -1 h-1 outperformed all previously reported materials. Theoretical model backed by in situ characterization verified α-C surrounding the Fe-O4 motif as the actual reaction site in terms of thermodynamics and kinetics aspects. The strategy of activating carbon reaction site by metal center via oxo-bridge provides inspiring insights for the rational design of carbon materials for heterogeneous catalysis.

Low-Coordinated Conductive ZnCu Metal-Organic Frameworks for Highly Selective H2O2 Electrosynthesis

Direct electrosynthesis of hydrogen peroxide (H2O2) with high production rate and high selectivity through the two-electron oxygen reduction reaction (2e-ORR) offers a sustainable alternative to the energy-intensive anthraquinone technology but remains a challenge. Herein, a low-coordinated, 2D conductive Zn/Cu metal-organic framework supported on hollow nanocube structures (ZnCu-MOF (H)) is rationally designed and synthesized. The as-prepared ZnCu-MOF (H) catalyst exhibits substantially boosted electrocatalytic kinetics, enhanced H2O2 selectivity, and ultra-high Faradaic efficiency for 2e-ORR process in both alkaline and neutral conditions. Electrochemical measurements, operando/quasi in situ spectroscopy, and theoretical calculation demonstrate that the introduction of Cu atoms with low-coordinated structures induces the transformation of active sites, resulting in the beneficial electron transfer and the optimized energy barrier, thereby improving the electrocatalytic activity and selectivity.

Switchable molecular electrocatalysis

We demonstrate a switchable electrocatalysis mechanism modulated by hydrogen bonding interactions in ligand geometries. By manipulating these geometries, specific electrochemical processes at a single catalytic site can be selectively and precisely activated or deactivated. The α geometry enhances dioxygen electroreduction (ORR) while inhibiting protium redox processes, with the opposite effect seen in the β geometry. Intramolecular hydrogen bonding in the α geometry boosts electron density at the catalytic center, facilitating a shift of ORR to a 4-electron pathway. Conversely, the β geometry promotes a 2-electron ORR and facilitates electrocatalytic hydrogen evolution through an extensive proton charge assembly; offering a paradigm shift to conventional electrocatalytic principles. The expectations that ligand geometry induced electron density modulations in the catalytic metal centre would have a comparable impact on both ORR and HER has been questioned due to the contrasting reactivity exhibited by α-geometry and β-geometry molecules. This further emphasizes the complex and intriguing nature of the roles played by ligands in molecular electrocatalysis.

Electron Redistribution of Ru Site on MoO2@NiMoO4 Support for Efficient Ampere-Level Current Density Electrolysis of Alkaline Seawater

Seawater electrolysis is a promising but challenging strategy to generate carbon-neutral hydrogen. A grand challenge for hydrogen evolution reaction (HER) from alkaline seawater electrolysis is the development of efficient and stable electrocatalysts to overcome the limitation of sluggish kinetics. Here, a 3D nanorod hybrid catalyst is reported, which comprises heterostructure MoO2@NiMoO4 supported Ru nanoparticles (Ru/ MoO2@NiMoO4) with a size of ≈5 nm. Benefitting from the effect of strongly coupled interaction, Ru/MoO2@NiMoO4 catalyst exhibits a remarkable alkaline seawater hydrogen evolution performance, featured by a low overpotential of 184 mV at a current density of 1.0 A cm-2, superior to commercial Pt/C (338 mV). Experimental observations demonstrate that the heterostructure MoO2@NiMoO4 as an electron-accepting support makes the electron transfer from the Ru nanoparticles to MoO2, and thereby implements the electron redistribution of Ru site. Mechanistic analysis elucidates that the electron redistribution of active Ru site enhances the ability of hydrogen desorption, thereby promoting alkaline seawater HER kinetics and finally leading to a satisfactory catalysis performance at ampere-level current density of alkaline seawater electrolysis.

Boosting electrochemical oxygen reduction to hydrogen peroxide coupled with organic oxidation

The electrochemical oxygen reduction reaction (ORR) to produce hydrogen peroxide (H2O2) is appealing due to its sustainability. However, its efficiency is compromised by the competing 4e- ORR pathway. In this work, we report a hierarchical carbon nanosheet array electrode with a single-atom Ni catalyst synthesized using organic molecule-intercalated layered double hydroxides as precursors. The electrode exhibits excellent 2e- ORR performance under alkaline conditions and achieves H2O2 yield rates of 0.73 mol gcat-1 h-1 in the H-cell and 5.48 mol gcat-1 h-1 in the flow cell, outperforming most reported catalysts. The experimental results show that the Ni atoms selectively adsorb O2, while carbon nanosheets generate reactive hydrogen species, synergistically enhancing H2O2 production. Furthermore, a coupling reaction system integrating the 2e- ORR with ethylene glycol oxidation significantly enhances H2O2 yield rate to 7.30 mol gcat-1 h-1 while producing valuable glycolic acid. Moreover, we convert alkaline electrolyte containing H2O2 directly into the downstream product sodium perborate to reduce the separation cost further. Techno-economic analysis validates the economic viability of this system.

Optimizing the Activation Energy of Reactive Intermediates on Single-Atom Electrocatalysts: Challenges and Opportunities

Single-atom catalysts (SACs) have made great progress in recent years as potential catalysts for energy conversion and storage due to their unique properties, including maximum metal atoms utilization, high-quality activity, unique defined active sites, and sustained stability. Such advantages of single-atom catalysts significantly broaden their applications in various energy-conversion reactions. Given the extensive utilization of single-atom catalysts, methods and specific examples for improving the performance of single-atom catalysts in different reaction systems based on the Sabatier principle are highlighted and reactant binding energy volcano relationship curves are derived in non-homogeneous catalytic systems. The challenges and opportunities for single-atom catalysts in different reaction systems to improve their performance are also focused upon, including metal selection, coordination environments, and interaction with carriers. Finally, it is expected that this work may provide guidance for the design of high-performance single-atom catalysts in different reaction systems and thereby accelerate the rapid development of the targeted reaction.

Pyrazine-based iron metal organic frameworks (Fe-MOFs) with modulated O-Fe-N coordination for enhanced hydroxyl radical generation in Fenton-like process

Rational design of coordination environment of Fe-based metal-organic frameworks (Fe-MOFs) is still a challenge in achieving enhanced catalytic activity for Fenten-like advanced oxidation process. Here in, novel porous Fe-MOFs with modulated O-Fe-N coordination was developed by configurating amino terephthalic acid (H2ATA) and pyrazine-dicarboxylic acid (PzDC) (Fe-ATA/PzDC-7:3). PzDC ligands introduce pyridine-N sites to form O-Fe-N coordination with lower binding energy, which affect the local electronic environment of Fe-clusters in Fe-ATA, thus decreased its interfacial H2O2 activation barrier. O-Fe-N coordination also accelerate Fe(II)/Fe(III) cycling of Fe-clusters by triggering the reactive oxidant species mediated Fe(III) reduction. As such, Fe-ATA/PzDC-7:3/H2O2 system exhibited excellent degradation performance for typical antibiotic sulfamethoxazole (SMX), in which the steady-state concentration of hydroxyl radical (OH) was 1.6 times higher than that of unregulated Fe-ATA. Overall, this study highlights the role of O-Fe-N coordination and the electronic environment of Fe-clusters on regulating Fenton-like catalytic performance, and provides a platform for precise engineering of Fe-MOFs.

Surface Redox Chemistry Regulates the Reaction Microenvironment for Efficient Hydrogen Peroxide Generation

Electrosynthesis has emerged as an enticing solution for hydrogen peroxide (H2O2) production. However, efficient H2O2 generation encounters challenges related to the robust gas-liquid-solid interface within electrochemical reactors. In this work, we introduce an effective hydrophobic coating modified by iron (Fe) sites to optimize the reaction microenvironment. This modification aims to mitigate radical corrosion through Fe(II)/Fe(III) redox chemistry, reinforcing the reaction microenvironment at the three-phase interface. Consequently, we achieved a remarkable yield of up to 336.1 mmol h-1 with sustained catalyst operation for an extensive duration of 230 h at 200 mA cm-2 without causing damage to the reaction interface. Additionally, the Faradaic efficiency of H2O2 exceeded 90% across a broad range of test current densities. This surface redox chemistry approach for manipulating the reaction microenvironment not only advances long-term H2O2 electrosynthesis but also holds promise for other gas-starvation electrochemical reactions.

General Design Concept of High-Performance Single-Atom-Site Catalysts for H2O2 Electrosynthesis

Hydrogen peroxide (H2O2) as a green oxidizing agent is widely used in various fields. Electrosynthesis of H2O2 has gradually become a hotspot due to its convenient and environment-friendly features. Single-atom-site catalysts (SASCs) with uniform active sites are the ideal catalysts for the in-depth study of the reaction mechanism and structure-performance relationship. In this review, the outstanding achievements of SASCs in the electrosynthesis of H2O2 through 2e- oxygen reduction reaction (ORR) and 2e- water oxygen reaction (WOR) in recent years, are summarized. First, the elementary steps of the two pathways and the roles of key intermediates (*OOH and *OH) in the reactions are systematically discussed. Next, the influence of the size effect, electronic structure regulation, the support/interfacial effect, the optimization of coordination microenvironments, and the SASCs-derived catalysts applied in 2e- ORR are systematically analyzed. Besides, the developments of SASCs in 2e- WOR are also overviewed. Finally, the research progress of H2O2 electrosynthesis on SASCs is concluded, and an outlook on the rational design of SASCs is presented in conjunction with the design strategies and characterization techniques.

Enhanced electrocatalytic performance for H2O2 generation by boron-doped porous carbon hollow spheres

Electrocatalytic generation of H2O2 via the 2-electron pathway of oxygen reduction reaction (2e-ORR) is an attractive technology compared to the anthraquinone process due to convenience and environmental friendliness. However, catalysts with excellent selectivity and high activity for 2e-ORR are necessary for practical applications. Reported here is a catalyst comprising boron-doped porous carbon hollow spheres (B-PCHSs) prepared using the hard template method coupled with borate transesterification. In an alkali electrolyte, the selectivity of B-PCHS for 2e-ORR above 90% in range of 0.4-0.7 VRHE and an onset potential of 0.833 V was obtained. Meanwhile, the generation rate of H2O2 reached 902.48 mmol h-1 gcat-1 at 0.4 VRHE under 59.13 mA cm-2 in batch electrolysis. The excellent catalytic selectivity of B-PCHS for 2e-ORR originates from the boron element, and the catalytic activity of B-PCHS for H2O2 generation is contributed to the morphology of porous hollow spheres, which facilitates mass transfer processes.

Precisely constructing orbital coupling-modulated iron dinuclear site for enhanced catalytic ozonation performance

The advancement of atomically precise dinuclear heterogeneous catalysts holds great potential in achieving efficient catalytic ozonation performance and contributes to the understanding of synergy mechanisms during reaction conditions. Herein, we demonstrate a "ship-in-a-bottle and pyrolysis" strategy that utilizes Fe2(CO)9 dinuclear-cluster to precisely construct Fe2 site, consisting of two Fe1-N3 units connected by Fe-Fe bonds and firmly bonded to N-doped carbon. Systematic characterizations and theoretical modeling reveal that the Fe-Fe coordination motif markedly reduced the devotion of the antibonding state in the Fe-O bond because of the strong orbital coupling interaction of dual Fe d-d orbitals. This facilitates O-O covalent bond cleavage of O3 and enhances binding strength with reaction intermediates (atomic oxygen species; *O and *OO), thus boosting catalytic ozonation performance. As a result, Fe dinuclear site catalyst exhibits 100% ozonation efficiency for CH3SH elimination, outperforming commercial MnO2 catalysts by 1,200-fold. This research provides insights into the atomic-level structure-activity relationship of ozonation catalysts and extends the use of dinuclear catalysts in catalytic ozonation and beyond.

Mesoporous carbon spheres with programmable interiors as efficient nanoreactors for H2O2 electrosynthesis

The nanoreactor holds great promise as it emulates the natural processes of living organisms to facilitate chemical reactions, offering immense potential in catalytic energy conversion owing to its unique structural functionality. Here, we propose the utilization of precisely engineered carbon spheres as building blocks, integrating micromechanics and controllable synthesis to explore their catalytic functionalities in two-electron oxygen reduction reactions. After conducting rigorous experiments and simulations, we present compelling evidence for the enhanced mass transfer and microenvironment modulation effects offered by these mesoporous hollow carbon spheres, particularly when possessing a suitably sized hollow architecture. Impressively, the pivotal achievement lies in the successful screening of a potent, selective, and durable two-electron oxygen reduction reaction catalyst for the direct synthesis of medical-grade hydrogen peroxide disinfectant. Serving as an exemplary demonstration of nanoreactor engineering in catalyst screening, this work highlights the immense potential of various well-designed carbon-based nanoreactors in extensive applications.

Scalable Synthesis and Electrocatalytic Performance of Highly Fluorinated Covalent Organic Frameworks for Oxygen Reduction

In this study, we present a novel approach for the synthesis of covalent organic frameworks (COFs) that overcomes the common limitations of non-scalable solvothermal procedures. Our method allows for the room-temperature and scalable synthesis of a highly fluorinated DFTAPB-TFTA-COF, which exhibits intrinsic hydrophobicity. We used DFT-based calculations to elucidate the role of the fluorine atoms in enhancing the crystallinity of the material through corrugation effects, resulting in maximized interlayer interactions, as disclosed both from PXRD structural resolution and theoretical simulations. We further investigated the electrocatalytic properties of this material towards the oxygen reduction reaction (ORR). Our results show that the fluorinated COF produces hydrogen peroxide selectively with low overpotential (0.062 V) and high turnover frequency (0.0757 s-1 ) without the addition of any conductive additives. These values are among the best reported for non-pyrolyzed and metal-free electrocatalysts. Finally, we employed DFT-based calculations to analyse the reaction mechanism, highlighting the crucial role of the fluorine atom in the active site assembly. Our findings shed light on the potential of fluorinated COFs as promising electrocatalysts for the ORR, as well as their potential applications in other fields.

An Unlocked Two-Dimensional Conductive Zn-MOF on Polymeric Carbon Nitride for Photocatalytic H2 O2 Production

Developing highly efficient catalytic sites for O2 reduction to H2 O2 , while ensuring the fast injection of energetic electrons into these sites, is crucial for artificial H2 O2 photosynthesis but remains challenging. Herein, we report a strongly coupled hybrid photocatalyst comprising polymeric carbon nitride (CN) and a two-dimensional conductive Zn-containing metal-organic framework (Zn-MOF) (denoted as CN/Zn-MOF(lc)/400; lc, low crystallinity; 400, annealing temperature in °C), in which the catalytic capability of Zn-MOF(lc) for H2 O2 production is unlocked by the annealing-induced effects. As revealed by experimental and theoretical calculation results, the Zn sites coordinated to four O (Zn-O4 ) in Zn-MOF(lc) are thermally activated to a relatively electron-rich state due to the annealing-induced local structure shrinkage, which favors the formation of a key *OOH intermediate of 2e- O2 reduction on these sites. Moreover, the annealing treatment facilitates the photoelectron migration from the CN photocatalyst to the Zn-MOF(lc) catalytic unit. As a result, the optimized catalyst exhibits dramatically enhanced H2 O2 production activity and excellent stability under visible light irradiation.

The Use of Iron-Doped Anatase TiO2 Nanofibers for Enhanced Photocatalytic Fenton-like Reaction to Degrade Tylosin

The removal of antibiotics from wastewater to prevent their environmental accumulation is significant for human health and ecosystems. Herein, iron (Fe)-atom-doped anatase TiO2 nanofibers (Fe-TNs) were manufactured for the photocatalytic Fenton-like decomposition of tylosin (TYL) under LED illumination. Compared with the pristine TiO2 nanofibers (TNs), the optimized Fe-TNs exhibited improved visible-light-driven photocatalytic Fenton-like activity with a TYL degradation efficiency of 98.5% within 4 h. The effective TYL degradation could be attributed to the expanded optical light absorption and accelerated separation and migration of photogenerated electrons and holes after the introduction of Fe. The photogenerated electrons were highly conducive to the generation of active SO4•- radicals as they facilitated Fe(III)/Fe(II) cycles, and to oxidizing TYL. Moreover, the holes could be involved in TYL degradation. Thus, a significant enhancement in TYL degradation could be achieved. This research verifies the use of iron-doped anatase nanofibers as an effective method to synthesize novel photocatalytic Fenton-like catalysts through surface engineering for wastewater remediation.