Wide-Range Color-Tunable Organic Scintillators for X-Ray Imaging Through Host-Guest Doping

Monitoring α/β Particles Using a Copper Cluster Scintillator Detector

High-energy radiation is widely used in medicine, industry, and scientific research. Meanwhile, the detection of environmental ionizing radiation is essential to ensure the safe use of high-energy radiation. Among radiation detectors, scintillator detectors offer multiple advantages, including simple structure, high sensitivity, excellent environmental adaptability, and a favorable performance-to-price ratio. However, the development of high-performance scintillators that can provide highly sensitive responses to environmental radiation, especially α/β particles, remains a challenge. In this work, a copper cluster (Cu4I4(DPPPy)2) with excellent water-oxygen stability is prepared using a simple one-pot method at room temperature. Cu4I4(DPPPy)2 not only exhibits excellent X-ray excited luminescence (XEL) under X-ray irradiation but also demonstrates a highly sensitive scintillation response to α/β particles. By integrating Cu4I4(DPPPy)2 with a photomultiplier tube (PMT) and nuclear electronics, an α/β surface contamination monitor is successfully developed. This monitor enables the sensitive detection of excessive α/β particles in real-world environments. The detection frequency and signal intensity of Cu4I4(DPPPy)2 significantly surpass those of commercial scintillator of YAP:Ce, BGO, PbWO4, and anthracene under identical conditions, highlighting the promising application of metal clusters in low-dose environmental radiation detection.

Recent Advances on Organic Scintillators with High Exciton Utilization Efficiency for X-Ray Scintillation and Imaging

Organic scintillators have rapidly emerged in recent years for X-ray scintillation and imaging, benefiting from their inherent advantages of abundant raw materials, low-temperature processing, high mechanical flexibility, and easy of large-scale fabrication. However, conventional organic scintillators suffer from weak X-ray absorption and inefficient exciton utilization, limiting their commercial viability. To overcome these challenges, new-generation organic scintillators have recently been developed with innovative emission mechanisms to ensure exciton utilization efficiency and the incorporation of heavy atoms to improve X-ray absorption. In recent years, these advancements have led to remarkable progress in high-performance X-ray scintillation and imaging. Here, we present a concept article on new-generation organic scintillators with high exciton utilization efficiency, focusing on molecular design, emission mechanisms, scintillation performance, and X-ray imaging applications. We also discuss future development trends in organic X-ray scintillators.

Synthesis and Luminescent Behavior of Lead, Manganese, and Copper Containing Organic-Inorganic Metal Halides

Organic-inorganic metal halides (OIMHs) have attracted considerable attention owing to their unique optoelectronic properties. Here, we successfully synthesized five lead, manganese and copper containing OIMHs based on 4-aminodiphenylmethane (C13H13N) and 4,4'-methylenedianiline (C13H14N2). Among them, (C13H14N)2PbCl4 and (C13H14N)2PbBr4, both exhibiting two-dimensional frameworks, crystallize into the Pmm2 and P21/c space groups, respectively, and present optical band gaps of approximately 3.6 and 3.0 eV. (C13H14N)2PbCl4 demonstrates blue light emission centered at 502 nm with a substantial full width at half-maximum (fwhm) of 180 nm and a Stokes shift of 182 nm, originating from self-trapped exciton emission. In contrast, (C13H14N)2PbBr4 displays blue photoluminescence characterized by a fwhm of 26 nm and an emission peak at 417 nm, corresponding to free exciton emission. Additionally, we investigated three zero-dimensional OIMHs: (C13H14N)4MnCl6·Cl, (C13H15N2)4CuCl10·4H2O, and [(C13H16N2)(C2H6NH2)MnCl4·2H2O]·Cl. Our research delves into their fundamental optical properties and luminescence mechanisms, providing valuable insights for future studies.

Molecular Engineering for High-Performance X-ray Scintillators

X-ray scintillators, materials that convert high-energy radiation into detectable light in the ultraviolet to visible spectrum, are widely used in industrial and medical applications. Organic and organic-inorganic hybrid systems have emerged as promising alternatives for X-ray detection and imaging due to their mechanical flexibility, lightweight, tunable excited states, and solution processability for large-scale fabrication. However, these systems often suffer from weak X-ray absorption and insufficient exciton utilization, which seriously affects their scintillation performance, limiting their potential for broader application and commercialization. This review highlights recent advances in molecular engineering for developing high-performance X-ray scintillators. It focuses on molecular design principles, such as the heavy atom effect, donor-acceptor/host-guest strategies, hydrogen/halogen bonding, molecular sensitization, and crystal packing, for enhancing scintillation performance. By leveraging these approaches, researchers have made significant strides in improving X-ray scintillation efficiency and advancing the potential of these materials for commercial applications.

Flexible X-Ray Detector for Cumulative Dose Monitoring Through Reversible Photochromism and Luminescence Modulation

This study presents a multi-mode X-ray detection and imaging strategy by integrating photochromism, photoluminescence, and radioluminescence into Tb3+-doped CaAl2Si2O8. CaAl2Si2O8: Tb3+ exhibits stable radioluminescence, oxygen vacancy-related photochromism, and photoluminescence modulation, all of which showed a linear relationship with X-ray exposure. This multi-mode response enables high-quality imaging and detection in both bright and dark conditions, facilitating time-dependent cumulative X-ray radiation dose assessments. Reversible color and luminescence changes are achieved through cyclic tests involving alternating X-ray and 473 nm laser irradiation. The PDMS CaAl2Si2O8: Tb3+ ink and flexible film demonstrate high suitability for wearable X-ray detection devices and imaging of irregular objects, offering an innovative approach to X-ray detection and imaging.

Engineering Supramolecular [c2]Daisy Chains for Structural Hierarchy-Dependent Emission and Photoreactivity

Organic photofunctional materials exhibit properties that are highly dependent on their structural hierarchy. The variability in intermolecular interactions and molecular packing in both monomeric and aggregated states complicates the controllability and predictability of their photophysical and photochemical properties. To address this challenge, we developed three luminescent supramolecular [c2]daisy chains as simplified models. The rigid and mutually embedded linkers between the host and guests facilitate the formation of [c2]daisy chains with balanced stability and dynamics. Additionally, the close and tunable π-π interactions between the luminescent units provide a structural basis for fluorescence modulation and topochemical photoreactions. We performed two sets of comparisons to assess luminescence and photoreactivity: one comparison involves molecules with and without crown ethers, and the other contrasting their behavior under UV excitation in solution (diluted and concentrated) versus in the aggregated and crystalline states. Specifically, in the crystalline state, [c2]daisy chains effectively stabilize molecular packing, leading to highly efficient dimer-dependent emission. This unique structure remains in both solution (c > 1 mM) and aggregated states, which can direct the reaction pathway toward rapid and efficient intermolecular photocycloaddition upon UV irradiation. However, in highly diluted solution (10 μM), [c2]daisy chains dissociate into monomers, which further undergo intramolecular photocyclization. This study provides new insights into employing supramolecular strategies for controllable molecular aggregation and the fine-tuning of photoreaction pathways and kinetics.

Organic Cation Modulation in Manganese Halides to Optimize Crystallization Process and X-Ray Response Toward Large-Area Scintillator Screen

Manganese halides are one of the most potential candidates for large-area flat-panel detection owing to their biological safety and all-solution preparation. However, reducing photon scattering and enhancing the efficient luminescence of scintillator screens remains a challenge due to their uncontrollable crystallization and serious nonradiative recombination. Herein, an organic cation modulation is reported to control the crystallization process and enhance the luminescence properties of manganese halides. Given the industrial requirements of the X-ray flat-panel detector, the large-area A2MnBr4 screen (900 cm2) with excellent uniformity is blade-coated at 60 °C. Theoretical calculations and in situ measurements reveal that organic cations with larger steric hindrance can slow down the crystallization of the screen, thus neatening the crystal arrangement and reducing the photon scattering. Moreover, larger steric hindrance can also endow the material with higher exciton binding energy, which is beneficial for restraining nonradiative recombination. Therefore, the BPP2MnBr4 (BPP = C25H22P+) screen with larger steric hindrance exhibits a superior spatial resolution (>20 lp mm-1) and ultra-low detection limit (< 250 nGyair s-1). This is the first time steric hindrance modulation is used in blade-coated scintillator screens, and it believes this study will provide some guidance for the development of high-performance manganese halide scintillators.

Recent advances in tunable solid-state emission based on α-cyanodiarylethenes: from molecular packing regulation to functional development

The design and development of organic solid-state luminescent materials stand as crucial pillars within the realm of contemporary photofunctional materials. Overcoming challenges such as concentration quenching and achieving tailored luminescent properties necessitates a judicious approach to molecular structure design and the strategic utilization of diverse stimuli to modulate molecular packing patterns. Among the myriad candidates, α-cyanodiarylethenes (CAEs) emerge with distinctive solid-state luminescent attributes, capable of forming self-assembled packing structures with varying degrees of π-π stacking. This characteristic endows them with potential in the field of intelligent molecular responsive materials and optoelectronic devices. This tutorial review embarks on an exploration of design strategies geared towards attaining tunable solid-state emission through customized packing of CAEs. It explores the utilization of stimuli responses, including such as mechanical forces, light irradiation, solvent interactions, thermal influences, as well as the utilization of co-assembly methodologies. The overarching aim of this review is to provide a widely applicable platform fostering the flourishing development of modern organic photofunctional materials through integrating principles of molecular engineering, organic optoelectronics, and materials science.

Achieving pure room temperature phosphorescence (RTP) in phenoselenazine-based organic emitters through synergism among heavy atom effect, enhanced n → π* transitions and magnified electron coupling by the A-D-A molecular configuration

The weak spin-orbit coupling (SOC) in metal-free organic molecules poses a challenge in achieving phosphorescence emission. To attain pure phosphorescence in RTP organic emitters, a promising molecular design concept has been proposed. This involves incorporating n → π* transitions and leveraging the heavy atomic effect within the spin-orbit charge transfer-induced intersystem crossing (SOCT-ISC) mechanism of bipolar molecules. Following this design concept, two bipolar metal-free organic molecules (PhSeB and PhSeDB) with donor-acceptor (D-A) and acceptor-donor-acceptor (A-D-A) configurations have been synthesized. When the molecular configuration changes from D-A to A-D-A, PhSeDB exhibits stronger electron coupling and n → π* transitions, which can further enhance the spin-orbit coupling (SOC) together with the heave atom effect from the selenium atom. By the advanced synergism among enhanced n → π* transitions, heavy atom effect and magnified electron coupling to efficiently promote phosphorescence emission, PhSeDB can achieve pure RTP emission in both the solution and doped solid film. Thanks to the higher spin-orbit coupling matrix elements (SOCMEs) for T1 ↔ S0, PhSeDB attains the highest phosphorescence quantum yield (ca. 0.78) among all the RTP organic emitters reported. Consequently, the purely organic phosphorescent light-emitting diodes (POPLEDs) based on PhSeDB achieve the highest external quantum efficiencies of 18.2% and luminance of 3000 cd m-2. These encouraging results underscore the significant potential of this innovative molecular design concept for highly efficient POPLEDs.

Through-Space Charge-Transfer Organogold(III) Complexes Enable High-Performance X-ray Scintillation and Imaging

Organic scintillators have recently attracted growing attention for X-ray detection in industrial and medical applications. However, these materials still face critical obstacles of low attenuation efficiency and/or inefficient triplet exciton utilization. Here we developed a new category of organogold(III) complexes, Tp-Au-1 and Tp-Au-2, through adopting a through-space interaction motif to realize high X-ray attenuation efficiency and efficient harvesting of triplet excitons for emission. Thanks to the efficient through-space charge transfer process, this panel of complexes achieved higher photoluminescence quantum yield and shorter radiative lifetimes compared with the through-bond reference complexes. Inspiringly, these organogold(III) complexes exhibited polarity-dependent emission origins: thermally activated delayed fluorescence and/or phosphorescence. Under X-ray irradiation, Tp-Au-2 manifested intense radioluminescence together with a record-high scintillation light yield of 77,600 photons MeV-1 for organic scintillators. The resulting scintillator screens demonstrated high-quality X-ray imaging with >16.0 line pairs mm-1 spatial resolution, outstripping most organic and inorganic scintillators. This finding provides a feasible strategy for the design of superior organic X-ray scintillators.

Accelerating Intersystem Crossing in Multiresonance Thermally Activated Delayed Fluorescence Emitters via Long-Range Charge Transfer

Multiresonance thermally activated delayed fluorescence (MR-TADF) emitters are excellent candidates for high-performance organic light-emitting diodes (OLEDs) due to their narrowband emission properties. However, the inherent mechanism of regulating the rate of intersystem crossing (ISC) is ambiguous in certain MR-TADF skeletons. Herein, we propose a mechanism of accelerating ISC in B/S-based MR-TADF emitters by peripheral modifications of electron-donating groups (EDGs) without affecting the narrowband emission property. The long-range charge transfer (LRCT) stems from the introduced EDG leading to high-lying singlet and triplet excited states. The ISC process is accelerated by the enhanced spin-orbital coupling (SOC) between the singlet short-range charge transfer (SRCT) and triplet LRCT manifolds. Meanwhile, the narrowband emission derived from the MR-type SRCT state is well retained as expected in the peripherally modified MR-TADF emitters. This work reveals the regulation mechanism of photophysical properties by high-lying LRCT excited states and provides a significant theoretical basis for modulating the rate of ISC in the further design of MR-TADF materials.