Functionalization of magnetic nanoparticles with 1-cyclopropyl-6-fluoro-4-oxo-7-(piperazin-1-yl)-1,4-dihydroquinoline-3-carboxylic acid as an efficient adsorbent for the Gefitinib removal from water

This study presents a novel adsorbent for the removal of Gefitinib from water using 1-cyclopropyl-6-fluoro-4-oxo-7-(piperazin-1-yl)-1,4-dihydroquinoline-3-carboxylic acid modified SiO2@SPION nanoparticles (as SPION@CPFO-PAC). Several investigations were conducted to examine the chemical characteristics, morphological aspects, thermal stability, and magnetic behavior of the produced nano adsorbent. Based on the analysis findings, the produced nano adsorbent exhibited superparamagnetic properties. The findings of the TEM and SEM pictures indicate that the synthesis technique resulted in the creation of uniform nanoparticles, mostly spherical in shape, with an average size of 20-25 nm. These nanoparticles exhibit well-defined structure and possess excellent stability. Under optimal conditions (100 ng/mL-10 mL of Gefitinib, adsorbent dosage = 0.02 g, t = 30 min), the drug elimination percentage reached 92.02%. The results from these adsorption studies were described using the Freundlich isotherm, and the pseudo-second-order model well described the kinetics of adsorption. The thermodynamic investigation indicates that the process is spontaneous and exothermic, as shown by the results of ΔH and ΔG values at various temperatures. The study examined the capacity to retrieve the produced nanoadsorbent and found that it could be efficiently separated and reused for four consecutive cycles without significant decrease in adsorption effectiveness.

Efficient synthesis of novel phenanthroline-dimedone derivatives using Pd@HQBI-SPION as a versatile palladium-immobilized catalyst

This paper presents the synthesis and application of a novel catalyst for carbon-carbon bond formations, comprising palladium immobilized on 2-(5-hydroxyquinolin-8-yl)-1H-benzo[d]imidazole-5-carboxylic acid modified superparamagnetic iron oxide nanoparticles (Pd@HQBI-SPION). The synthesis involved the attachment of HQBI ligands to SPION using APTES, followed by the immobilization of palladium. Characterization techniques, including FTIR, TEM, and magnetic measurements, confirmed the successful synthesis and structural integrity of Pd@HQBI-SPION. The catalytic activity of Pd@HQBI-SPION was evaluated in various carbon-carbon bond formation reactions, demonstrating high efficiency and reusability. 8 different derivatives bearing several electron withdrawing and electron donating functionalities were used as starting materials and the products were obtained in high isolated yields (75-97%). The catalyst exhibited excellent performance in one-pot synthesis of phenanthroline-dimedone polycyclic derivatives via C-alkylation followed by intramolecular O-alkylation of phenanthroline with dimedone. The products are obtained in high to excellent yields is described. This protocol presents a highly selective synthetic method for the construction of polycyclic aromatic compounds containing nitrogen and oxygen atoms.

Functionalization of porous silica with graphene oxide and polyethyleneimine, containing zinc copper ferrite nanoparticles for water treatment and antibacterial application

The article discusses the removal of methylene blue (MB) dye, a common cationic dye used in the textile industry, from aqueous solutions through an adsorption process. The use of porous components as adsorbents are shown to facilitate complete separation after the process is completed. The substrate was synthesized by connecting zinc copper ferrite (ZnCuFe2O4), polyethyleneimine (PEI), and Graphene Oxide (GO) sheets to MCM-48, which is a mesoporous material. The surface of MCM-48 was modified using CPTMS, which created an O-Si-Cl bridge, thereby improving the adsorption rate. The substrate was shown to have suitable sites for electrostatic interactions and creating hydrogen bonds with MB. The adsorption process from the Freundlich isotherm (R2 = 0.9224) and the pseudo-second-order diagram (R2 = 0.9927) demonstrates the adsorption of several layers of dye on the heterogeneous surface of the substrate. The synthesized substrate was also shown to have good bactericidal activity against E. coli and S. aureus bacterial strain. Furthermore, the substrate maintained its initial ability to adsorb MB dye for four consecutive cycles. The research resulted that ZnCuFe2O4@MCM-48/PEI-GO substrate has the potential for efficient and economical removal of MB dye from aqueous solutions (R = 88.82%) (qmax = 294.1176 mg. g-1), making it a promising solution for the disposal of harmful industrial waste.

Starch mediates and cements densely magnetite-coating of talc, giving an efficient nano-catalyst for three-component synthesis of imidazo[1,2-c]quinazolines

Hot-water-soluble starch (HWSS) was used as a powerful cementing material to produce nano-size conglomerates of talc and magnetite nanoparticles. Coordination of HWSS hydroxyl groups to iron atoms at surface of magnetite leads to grafting and encapsulation of its nanoparticles. The resulting nano-complex showed a higher loading capacity on talc than pristine magnetite nanoparticles. Only a minute amount of HWSS was detected in the fabricated nano-composite Talc\HWSS@Fe3O4. XPS study suggests a considerable interaction between HWSS and Fe3O4 nanoparticles, upon which some of the Fe+3 atoms on surface of Fe3O4 are reduced into Fe+2 atoms. ATR FT-IR spectra of the nano-composite revealed significant delamination of talc sheets on interaction with HWSS-coated Fe3O4 nanoparticles. The nano-composite displayed an efficient catalytic activity in the synthesis of new imidazo[1,2-c]quinazoline derivatives via Grobke-Blackburn-Bienaymé three-component reaction of 4-aminoquinazoline, arylaldehydes and isocyanide. The efficiency of the method was exemplified by synthesizing 7 new products in fairly high yields (68-83%) within short reaction times (24-30 min) using a catalytic amount of the catalyst under solvent-free condition at 120 °C. Clean and fast synthesis of the products and convenient separation of the robust nano-catalyst are the prominent advantages of the present method. The nano-catalyst was properly characterized.

Efficient synthesis of 3-alkyl-2-(-1H-1,2,3-triazolyl)methyl)thio)-2,3-dihydroquinazolin-4(1H)-one derivative via multistep synthesis approach by novel Cu@Py-Oxa@SPION catalyst

In this pared, an efficient method is introduced for the synthesis of 3-alkyl-2-(((4-(2-oxopropyl)-1H-1,2,3-triazol-1-yl)alkyl)thio)-2,3-dihydroquinazolin-4(1H)-one derivatives. These novel products have both 1,2,3-triazole and quinazolinone in their structures. For the synthesis of these products, a novel catalyst is designed, synthesized, and characterized by the immobilization of copper onto modified magnetic iron oxide. The catalyst (denoted: Cu@Py-Oxa@SPION) was characterized by several characterization techniques. In this regard, 16 3-alkyl-2-(((4-(2-oxopropyl)-1H-1,2,3-triazol-1-yl)alkyl)thio)-2,3-dihydroquinazolin-4(1H)-one derivatives were synthesized in high isolated yields (77-86%). As an advantage, the catalyst is highly recoverable and its activity has not decreased after 7 sequential runs. The method is very efficient for the synthesis of the products in high isolated yields under mild reaction conditions in a green solvent. The scope of the method is broad and several examples were successfully synthesized using starting materials with different functional groups.

A decennary update on applications of metal nanoparticles (MNPs) in the synthesis of nitrogen- and oxygen-containing heterocyclic scaffolds

Heterocycles have been found to be of much importance as several nitrogen- and oxygen-containing heterocycle compounds exist amongst the various USFDA-approved drugs. Because of the advancement of nanotechnology, nanocatalysis has found abundant applications in the synthesis of heterocyclic compounds. Numerous nanoparticles (NPs) have been utilized for several organic transformations, which led us to make dedicated efforts for the complete coverage of applications of metal nanoparticles (MNPs) in the synthesis of heterocyclic scaffolds reported from 2010 to 2019. Our emphasize during the coverage of catalyzed reactions of the various MNPs such as Ag, Au, Co, Cu, Fe, Ni, Pd, Pt, Rh, Ru, Si, Ti, and Zn has not only been on nanoparticles catalyzed synthetic transformations for the synthesis of heterocyclic scaffolds, but also provide an inherent framework for the reader to select a suitable catalytic system of interest for the synthesis of desired heterocyclic scaffold.

Ultrasonic promoted synthesis of Ag nanoparticle decorated thiourea-functionalized magnetic hydroxyapatite: a robust inorganic–organic hybrid nanocatalyst for oxidation and reduction reactions

In this research, ultrasonic synthesis is applied for the fabrication of a novel catalyst, based on immobilization of silver nanoparticles (AgNPs) on thiourea functionalized magnetic hydroxyapatite.

The use of magnetic starch as a support for an ionic liquid-β-cyclodextrin based catalyst for the synthesis of imidazothiadiazolamine derivatives

In this paper, a novel catalyst is introduced based on the introduction of an ionic liquid onto the β-cyclodextrin. The ionic liquid-β-cyclodextrin was anchored to magnetic starch (denoted βCD-IL@M-Starch) and fully characterized by several methods including TEM, TGA, VSM and FT-IR. The catalyst was used for the synthesis of imidazo[2,1-b][1,3,4]thiadiazol-5-amine and imidazo[1,2-a]pyridin-3-amine derivatives. βCD-IL@M-Starch catalyst showed very good activity in the synthesis of diphenylimidazo[2,1-b][1,3,4]thiadiazol-5-amine derivatives from the corresponding benzaldehyde, semicarbazide, benzaldehydes and isocyanides. The products were obtained in a mild reaction conditions in good isolated yields in the presence of βCD-IL@M-Starch as catalyst. The catalyst showed to be magnetically reusable, and gave very good results in 10 sequential reactions.