Elimination of 4‐chlorophenol in aqueous solution by the Novel Pd/MIL‐101(Cr)‐Hydrogen‐Accelerated catalytic fenton system

UiO-66(Zr)-2OH-Supported Pd0 NP Catalysts Accelerated a Fenton-Like Reaction: Iron Cycling and Hydrogen Peroxide Generation Achieved Simultaneously

Both the sluggish kinetics of Fe(II) regeneration and usage restriction of H2O2 have severely hindered the scientific progress of the Fenton reaction toward practical applications. Herein, a reduction strategy of activated hydrogen, which was used to simultaneously generate H2O2 and accelerate the regeneration of ferrous in a Fenton-like reaction based on the reduction of activated hydrogen derived from H2, was proposed. Two types of composite catalysts, namely, Pd/UiO-66(Zr)-2OH and Pd@UiO-66(Zr)-2OH, were successfully prepared by loading nano-Pd particles onto the outer and inner pores of UiO-66(Zr)-2OH in different loading modes, respectively. They were used to enhance the reduction of activated hydrogen. The characterization results based on the analysis of scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy revealed that the materials were successfully prepared. By using a trace amount of ferrous iron and without adding H2O2, trimethoprim (C0 = 20 mg·L-1), as a target pollutant, could be nearly 100% degraded within 180 min in the reaction system composed of these two materials. The cycle of iron and the self-generation of H2O2 were verified by the detection of ferrous H2O2 in the system. Density functional theory calculation results further confirmed that the pore-filled Pd0 NPs, as the main catalytic site for Pd@UiO-66(Zr)-2OH, could produce H2O2 under the combined action of hydrogen and oxygen. The Pd@UiO-66(Zr)-2OH system had excellent stability after multiple applications (at least 6 cycles), all of which resulted in 100% removal of trimethoprim. The degradation efficiency of the Pd/UiO-66(Zr)-2OH system for TMP gradually decreased from 97 to 80% after six cycles. The results of electron paramagnetic resonance combined with classical radical burst experiments revealed the degradation pathways in the reaction system with hydroxyl radicals and singlet oxygen as the main reactive oxygen particles.

Heterogeneous activation of self-generated H2O2 by Pd@UiO-66(Zr) for trimethoprim degradation: Efficiency and mechanism

The Fenton reaction is recognized as an effective technique for degrading persistent organic pollutants, such as the emerging pollutant trimethoprim (TMP). Recently, due to the excellent reducibility of active hydrogen ([H]), Pd-H2 has been preferred for Fenton-like reactions and the specific H2 activation of Pd-based catalysts. Herein, a heterogeneous Fenton catalyst named the hydrogen-accelerated oxygen reduction Fenton (MHORF@UiO-66(Zr)) system was prepared through the strategy of building ships in the bottle. The [H] has been used for the acceleration of the reduction of Fe(III) and self-generate H2O2. The systematic characterization demonstrated that the nano Pd0 particle was highly dispersed into the UiO-66(Zr). The results found that 20 mg L-1 of TMP was thoroughly degraded within 90 min in the MHORF@UiO-66(Zr) system under conditions of initial pH 3, 30 mL min-1 H2, 2 g L-1 Pd@UiO-66(Zr) and 25 μM Fe2+. The hydroxyl radical as well as the singlet oxygen were evidenced to be the main reactive oxygen species by scavenging experiments and electron spin resonance. In addition, both reducing Fe(III) and self-generating H2O2 could be achieved due to the strong metal-support interaction (SMSI) between the nano Pd0 particles and UiO-66(Zr) confirmed by the correlation results of XPS and calculation of density functional theory. Finally, the working mechanism of the MHORF@UiO-66(Zr) system and the possible degradation pathway of the TMP have been proposed. The novel system exhibited excellent reusability and stability after six cyclic reaction processes.

Pd/MIL-100(Fe) as hydrogen activator for FeIII/FeII cycle: Fenton removal of sulfamethazine

Masses of iron sludge generated from engineering practice of classic Fenton reaction constraints its further promotion. Accelerating the FeIII/FeII cycle may be conducive to reducing the initial ferrous slat dosage and the final iron sludge. Based on the reduction of Pd/MIL-100(Fe)-activated hydrogen, an improved Fenton system named MHACF-MIL-100(Fe) was developed at ambient temperature and pressure. 97.8% of sulfamethazine, the target pollutant in this work, could be degraded in 5 min under the conditions of 20 mM H2O2, 25 μM ferrous chloride, initial pH 3.0, 2 g·L-1 composite catalyst Pd/MIL-100(Fe) and hydrogen gas 60 mL·min-1. Combining density functional theory (DFT) calculation and intermediate detection, the degradation of this antibiotic was inferred to start from the cleavage of N-S bond. The catalytic of Pd/MIL-100(Fe), demonstrated by the removal efficiency of SMT and the catalyst morphology, remained intact after six reaction cycles. The present study provides an insight into the promotion of Fenton reaction.

Critical Review on the Mechanisms of Fe2+ Regeneration in the Electro-Fenton Process: Fundamentals and Boosting Strategies

This review presents an exhaustive overview on the mechanisms of Fe³⁺ cathodic reduction within the context of the electro-Fenton (EF) process. Different strategies developed to improve the reduction rate are discussed, dividing them into two categories that regard the mechanistic feature that is promoted: electron transfer control and mass transport control. Boosting the Fe³⁺ conversion to Fe²⁺ via electron transfer control includes: (i) the formation of a series of active sites in both carbon- and metal-based materials and (ii) the use of other emerging strategies such as single-atom catalysis or confinement effects. Concerning the enhancement of Fe²⁺ regeneration by mass transport control, the main routes involve the application of magnetic fields, pulse electrolysis, interfacial Joule heating effects, and photoirradiation. Finally, challenges are singled out, and future prospects are described. This review aims to clarify the Fe³⁺/Fe²⁺ cycling process in the EF process, eventually providing essential ideas for smart design of highly effective systems for wastewater treatment and valorization at an industrial scale.

Destruction of 4-chlorophenol by the hydrogen-accelerated catalytic Fenton system enhanced by Pd/NH2-MIL-101(Cr)

4-chlorophenol (4-CP) could be rapidly mineralized by using Fenton reaction. However, massive iron sludge will be generated because of the excessive consumption of iron salt and poor recycling of Fe^III back to Fe^II. In this paper, by introducing hydrogen gas and solid catalyst Pd/NH₂-MIL-101(Cr) to classic Fenton reactor, the novel system named MHACF-NH₂-MIL-101(Cr) was constructed. Much less Fe^II was needed in this system because the hydrogen could significantly accelerate the regeneration of Fe^II. The catalyst improved the utilization of H₂. The degradation reaction of 4-CP could be driven by using only trace amount of Fe^II. It could be rapidly degraded by the hydroxyl radical detected by the 4-Hydroxy-benzoicacid which is the oxidative product of benzoic acid and hydroxyl radical. The effects of dosage of ferrous salt, H₂O₂ and catalyst, H₂ flow, Pd content, and initial pH of and concentration of 4-CP aqueous solution were investigated. The robustness and morphology changes of this catalytic material were also systematically analysed. By clarifying the role of this solid MOFs material in this hydrogen-mediated Fenton reaction system, it will provide a new direction for the research and development of advanced oxidation processes with high efficiency and low sludge generation in future.

Recent progress of noble metals with tailored features in catalytic oxidation for organic pollutants degradation

With the increasing serious water pollutions, an increasing interest has given for the nanocomposites as environmental catalysts. To date, noble metals-based nanocomposites have been extensively studied by researchers in environmental catalysis. In detail, serving as key functional parts, noble metals are usually combined with other nanomaterials for rationally designing nanocomposites, which exhibit enhanced catalytic properties in pollutants removal. Noble metals in the nanocomposites possess tailored properties, thus playing different important roles in catalytic oxidation reactions for pollutants removal. To motivate the research and elaborate the progress of noble metals, this review (i) summarizes advanced characterization techniques and rising technology of theoretical calculation for evaluating noble metal, and (ii) classifies the roles according to their disparate mechanism in different catalytic oxidation reactions. Meanwhile, the enhanced mechanism and influence factors are discussed. (iii) The conclusions, facing challenges and perspectives are proposed for further development of noble metals-based nanocomposites as environmental catalysts.