Preparation and characteristic of a sodium alginate/carboxymethylated bacterial cellulose composite with a crosslinking semi-interpenetrating network

Incorporation of carboxymethyl chitosan (CMCS) for the modulation of physio-chemical characteristics and cell proliferation environment of the composite hydrogel microspheres

Hydrogels have excellent swelling properties and have been widely applied in tissue engineering because of their similarity to the extracellular matrix (ECM). Sodium alginate (SA) and carboxymethyl chitosan (CMCS) were prepared into hydrogel microspheres with Ca2+crosslinking in our study. The morphology, inner structure, mechanical properties, water content, swelling rate and BMP-2 loading and releasing properties were characterized. Our results showed that the composite SA /CMCS hydrogel microspheres were translucent and spherical in shape with uniform particle size. The incorporation of CMCS further increased the diameters of the microspheres, internal pore structure, water content, and mechanical properties of the SA/CMCS hydrogel microspheres. At the same SA concentration, with the increase of CMSC concentration, the diameter of microspheres could be increased by about 0.4 mm, the water content can be increased about 1%-2%. As for the mechanical properties, the compressive strength can be increased by 0.04-0.1 MPa, and the modulus of elasticity can be increased by 0.1-0.15 MPa. BMP-2 was chosen as a model agent and it could be loaded into SA/CMCS microspheres, and the incorporation of CMCS increased BMP-2 loading. The encapsulated BMP-2 was sustainably releasedin vitro. The leaching solutions of the SA/CMCS hydrogel microspheres exhibited good cytocompatibility and could increase ALP activity, ALP expression, and biomineralization on MC3T3-E1 cells. After 7 d of co-culture, ALP activities in S2.5C2 and S2.5C3 groups was increased by 50% and 45% compared with that of the control group. When embedded in the SA/CMCS microspheres, the MC3T3-E1 cells were evenly distributed inside the hydrogel microspheres and remained viable. Transcriptomic studies showed that incorporation of CMCS induced upregulation of 1141 differentially expressed genes (DEGs) and downregulation of 1614 DEGs compared with SA microspheres. The most significantly enriched pathways were the Wnt and MAPK signaling pathways induced by the incorporation of CMCS and BMP-2. In conclusion, our results indicated that the physiochemical characteristics of the SA hydrogel microspheres could be greatly modulated by CMCS to better mimic the ECM microenvironment and induce osteo-inductive activities of MC3T3-E1 cells.

Bacterial Cellulose-Based Blends and Composites: Versatile Biomaterials for Tissue Engineering Applications

Cellulose of bacterial origin, known as bacterial cellulose (BC), is one of the most versatile biomaterials that has a huge potential in tissue engineering due to its favourable mechanical properties, high hydrophilicity, crystallinity, and purity. Additional properties such as porous nano-fibrillar 3D structure and a high degree of polymerisation of BC mimic the properties of the native extracellular matrix (ECM), making it an excellent material for the fabrication of composite scaffolds suitable for cell growth and tissue development. Recently, the fabrication of BC-based scaffolds, including composites and blends with nanomaterials, and other biocompatible polymers has received particular attention owing to their desirable properties for tissue engineering. These have proven to be promising advanced materials in hard and soft tissue engineering. This review presents the latest state-of-the-art modified/functionalised BC-based composites and blends as advanced materials in tissue engineering. Their applicability as an ideal biomaterial in targeted tissue repair including bone, cartilage, vascular, skin, nerve, and cardiac tissue has been discussed. Additionally, this review briefly summarises the latest updates on the production strategies and characterisation of BC and its composites and blends. Finally, the challenges in the future development and the direction of future research are also discussed.

Design, development and characterization of interpenetrating polymer network hydrogel bead for controlled release of glipizide drug

In the current study, a novel interpenetrating polymer network (IPN) hydrogel bead was developed by encapsulation of antidiabetic drug glipizide using sodium alginate (SAL) and xanthan gum (XAG) biopolymers by ionotropic gelation technique with calcium chloride as cross-linking agent. In light of the fact that IPN hydrogel beads posses greater benefits in controlling the release of such short acting drug, sodium alginate and xanthan gum IPN hydrogel beads were prepared at different mass ratios (SAL:XAG =10:0, 9:1, 8:2, 7:3, 6:4, 5:5). Similarly, drug-loaded IPN hydrogel beads were also developed. The prepared hydrogel beads were investigated using Fourier transform infrared spectroscopy, X-ray powder diffraction, and thermogravimetric studies to understand the type of interactions between the composite beads. Surface morphology changes were studied by scanning electron microscopy. The particle size, drug entrapment efficiency, and swelling behavior of prepared hydrogel beads were also studied. Based on In-vitro drug dissolution studies, it was observed that SXF4 preparation containing SAL and XAG polymers at 7:3 ratio showed extended drug release of 97.53% at 9 h. This study demonstrated that inclusion of XAG has extended the drug release and able to achieve zero-order drug release profile.

Cellulose fibers-reinforced self-expanding porous composite with multiple hemostatic efficacy and shape adaptability for uncontrollable massive hemorrhage treatment

Uncontrollable hemorrhage leads to high mortality and thus effective bleeding control becomes increasingly important in the military field and civilian trauma arena. However, current hemostats not only present limitation when treating major bleeding, but also have various side effects. Here we report a self-expanding porous composites (CMCP) based on novel carboxymethyl cellulose (CMC) fibers and acetalized polyvinyl alcohol (PVA) for lethal hemorrhage control. The CMC fibers with uniform fibrous structure, high liquid absorption and procoagulant ability, are evenly interspersed inside the composite matrix. The obtained composites possess unique fiber-porous network, excellent absorption capacity, fast liquid-triggered self-expanding ability and robust fatigue resistance, and their physicochemical performance can be fine-tuned through varying the CMC content. In vitro tests show that the porous composite exhibits strong blood clotting ability, high adhesion to blood cells and protein, and the ability to activate platelet and the coagulation system. In vivo hemostatic evaluation further confirms that the CMCP presents high hemostatic efficacy and multiple hemostatic effects in swine femoral artery major hemorrhage model. Additionally, the CMCP will not fall off from the injury site, and is also easy to surgically remove from the wound cavity after the hemostasis. Importantly, results of CT tomography and 3D reconstruction indicate that CMCP can achieve shape adaptation to the surrounding tissues and the wound cavities with different depths and shapes, to accelerate hemostasis while protecting wound tissue and preventing infection.

A review of functionalised bacterial cellulose for targeted biomedical fields

Bacterial cellulose (BC), which can be produced by microorganisms, is an ideal biomaterial especially for tissue engineering and drug delivery systems thanks to its properties of high purity, biocompatibility, high mechanical strength, high crystallinity, 3 D nanofiber structure, porosity and high-water holding capacity. Therefore, wide ranges of researches have been done on the BC production process and its structural and physical modifications to make it more suitable for certain targeted biomedical applications thoroughly. BC's properties such as mechanical strength, pore diameter and porosity can be tuned in situ or ex situ processes by using various polymer and compounds. Besides, different organic or inorganic compounds that support cell attachment, proliferation and differentiation or provide functions such as antimicrobial effectiveness can be gained to its structure for targeted application. These processes not only increase the usage options of BC but also provide success for mimicking the natural tissue microenvironment, especially in tissue engineering applications. In this review article, the studies on optimisation of BC production in the last decade and the BC modification and functionalisation studies conducted for the three main perspectives as tissue engineering, drug delivery and wound dressing with diverse approaches are summarized.

AgNPs Ornamented Modified Bacterial Cellulose Based Self-Healable L-B-L Assembly via a Schiff Base Reaction: A Potential Wound Healing Patch

A layer-by-layer (L-B-L) bacterial cellulose (BC)-based transdermal patch has been prepared via a Schiff base reaction. The L-B-L assembly consisting of covalently cross-linked ethylene diamine-modified carboxymethylated BC isolated from the Glucanoacetobacter xylinus (MTCC7795) bacterial strain and aldehyde-modified pectin formed via a Schiff base reaction. The presence of the imine bond assists the self-healing process after being scratched in the presence of a pH 7.4 buffer solution monitored via optical microscopy, atomic force microscopy, and tensile strength analyses. The formation of the L-B-L assembly was confirmed using field-emission scanning electron microscopy (FESEM) analysis. Simultaneously, water swelling and deswelling studies were carried out to test its water retention efficiency. The presence of silver nanoparticles (AgNPs) has been confirmed by ultraviolet-visible spectroscopy and FESEM analyses. The antimicrobial activity of the AgNPs-incorporated transdermal patch has been examined over Staphylococcus aureus and Escherichia coli using the zone of inhibition method. Additionally, the cell viability assay was performed using the fluorescent dyes 4',6-diamidino-2-phenylindole and propidium iodide. The AgNPs in the L-B-L assembly showed antimicrobial property against both types of bacteria. The cytotoxicity and wound healing property of the patch system have been studied over NIH 3T3 fibroblast and A549 epithelial cell lines. The L-B-L film also influenced the wound healing process of these two cell lines.

Designing hydrophobic bacterial cellulose film composites assisted by sound waves

Bacterial cellulose (BC) is a promising material for new technologies, but the range of application is limited due to its hydrophilicity. This work aims to design a hydrophobic material derived from BC, which may find use in a broad range of applications such as packaging, sensing, construction, and electronics. We report that ultrasonic treatment of BC increased the degree of material impregnation into the fiber network that altered the hydrophobic properties of the BC-based composite films. Measurements in XTM revealed that sonication enhanced the porosity of BC films from 5.77% to 22.54%. Materials such as magnesium hydroxide (MH), graphene oxide (GO), and stearic acid (SA) were impregnated into the BC films. FTIR analysis and SEM-EDS confirmed the absorption of these molecules into the BC fibers. The water contact angle (WCA) of BC films impregnated with these functional materials showed a three to four-fold increase in hydrophobicity. The incorporation of 0.3% GO in sonicated BC afforded WCA at 137.20°, which is way better than the commercial water repellant (114.90°). The sonicated BC film afforded better tensile strength and Young's modulus, up to 229.67 MPa and 6.85 GPa, respectively. This work has shown that ultrasonic treatment improved the absorption capability of BC towards hydrophobic functionalization.

Ultrasonic treatment of bacterial cellulose increased the degree of material impregnation such as graphene oxide into the fiber network that altered the hydrophobic properties of the BC-based composite films.

Carboxymethyl Cellulose (CMC) as a Template for Laccase-Assisted Oxidation of Aniline

Polyaniline (PANi) is a conducting polymer which has been subject of intensive research on the exploitation of new products and applications. The main aim of the work is the development of a conductive bacterial cellulose (BC)-based material by enzymatic-assisted polymerization of aniline. For this, we study the role of carboxymethyl cellulose (CMC) as a template for the in situ polymerization of aniline. Bacterial cellulose was used as the supporting material for the entrapment of CMC and for the in situ oxidation reactions. The amount of CMC entrapped inside BC was optimized as well as the conditions for laccase-assisted oxidation of aniline. The new oligomers were evaluated by spectrometric techniques, namely 1H NMR and MALDI-TOF, and the functionalized BC surfaces were analyzed by thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM), and reflectance spectrophotometry. The conductivity of the developed materials was evaluated using the four-probe methodology. The oligomers obtained after reaction in the presence of CMC as template display a similar structure as when the reaction is conducted only in BC. Though, after oxidation in the presence of this template, the amount of oligomers entrapped inside BC/CMC is considerably higher conferring to the material greater electrical conductivity and coloration. The use of CMC as a template for aniline oxidation on BC seems to be a promising and cheap strategy to improve the yield of functionalization and increment the properties of the materials, namely electrical conductivity and coloration.

Synthesis and structure of carboxymethylcellulose with a high degree of substitution derived from waste disposable paper cups

The cost of the cellulose derived from some raw materials was high. In addition, the dispersion of the cellulose with special shape and a low degree of substitution (DS) in water-soluble polymers was poor. To resolve this problem, cellulose was separated from waste disposable paper cups (WDPC) and then the carboxymethylcellulose (CMC) was synthesized by etherification. Under the optimized conditions (the etherification temperature of 70 ℃, the etherification time of 1.5 h, the monochloroacetic acid mass (C₂H₃ClO₂) of 7 g), the DS of CMC was as high as 1.21. As-prepared CMC showed ribbon and rod-like shapes with a diameter of 25-50 μm. In addition, they exhibited an excellent thermal stability. Compared with other CMC, we could infer that as-prepared CMC in this paper will have potential applications in flexible composites and functional materials.

Effect of Additives on the in situ Laccase-Catalyzed Polymerization of Aniline Onto Bacterial Cellulose

Laccase-mediated systems are a green route to accelerate the oxidation of aniline and obtain polyaniline with conductive properties. The synthesis of green polyaniline (emeraldine salt) was herein improved by the inclusion of additives like sodium bis (2-ethyl hexyl) sulfosuccinate (AOT) and potassium hexacyanoferrate (II) (KHCF) in the medium. The aniline polymerization was confirmed by the detection of the absorption band typical of emeraldine salt at 420 nm, typical of the semiquinoid radical cation, and of the polaron absorption band at 700-800 nm, corresponding to the distinctive signal of doped or partial doped aniline. The oligomers and/or polymers obtained were characterized by spectrometry techniques, namely ¹H NMR and MALDI-TOF, and the bacterial cellulose (BC) conductivity was assessed by means of a four-point probe electrical conductivity technique. The best polymerization results were obtained with 5 mM AOT, 10 mM KHCF, and 25 U/mL of laccase. The synergistic effect between both additives in the presence of a catalyst leads to obtaining BC samples coated with green polyaniline with promising electric conductive properties.

Bacterial cellulose: a versatile biopolymer for wound dressing applications

Although several therapeutic approaches are available for wound and burn treatment and much progress has been made in this area, room for improvement still exists, driven by the urgent need of better strategies to accelerate wound healing and recovery, mostly for cases of severe burned patients. Bacterial cellulose (BC) is a biopolymer produced by bacteria with several advantages over vegetal cellulose, such as purity, high porosity, permeability to liquid and gases, elevated water uptake capacity and mechanical robustness. Besides its biocompatibility, BC can be modified in order to acquire antibacterial response and possible local drug delivery features. Due to its intrinsic versatility, BC is the perfect example of a biotechnological response to a clinical problem. In this review, we assess the BC main features and emphasis is given to a specific biomedical application: wound dressings. The production process and the physical-chemical properties that entitle this material to be used as wound dressing namely for burn healing are highlighted. An overview of the most common BC composites and their enhanced properties, in particular physical and biological, is provided, including the different production processes. A particular focus is given to the biochemistry and genetic manipulation of BC. A summary of the current marketed BC-based wound dressing products is presented, and finally, future perspectives for the usage of BC as wound dressing are foreseen.

Preparation of a carboxymethylated bacterial cellulose/polyaniline composite gel membrane and its characterization

The influence of carboxymethylation on the structure, morphology, electrical/proton conductivity and mechanical properties of carboxymethylated bacterial cellulose/polyaniline composites has been investigated.

Development of silver sulfadiazine loaded bacterial cellulose/sodium alginate composite films with enhanced antibacterial property

Sodium alginate (SA) and bacterial cellulose (BC) are widely used in many applications such as scaffolds and wound dressings due to its biocompatibility. Silver sulfadiazine (AgSD) is a topical antibacterial agents used as a topical cream on burns. In the study, novel BC/SA-AgSD composites were prepared and characterized by SEM, FTIR and TG analyses. These results indicate AgSD successfully impregnated into BC/SA matrix. The swelling behaviors in different pH were studied and the results showed pH-responsive swelling behaviors. The antibacterial performances of BC/SA-AgSD composites were evaluated with Escherichia coli, Staphylococcus aureus and Candida albicans. Moreover, the cytotoxicity of BC/SA-AgSD composites was performed on HEK 293 cells. The experimental results showed BC/SA-AgSD composites have excellent antibacterial activities and good biocompatibility, thus confirming its utility as potential wound dressings.