Thermogravimetric study of thermal degradation of polyetherimide

Mesoporous Polyimide Thin Films as Dendrite-Suppressing Separators for Lithium-Metal Batteries

Lithium-metal batteries require the effective suppression of lithium dendrites to guarantee both high performance and safety. Today's separators have macropores allowing lithium dendrites to traverse, leading to internal short circuits and other catastrophic results. Herein, we report a mesoporous polyimide separator for dendrite suppression. The polyimide separator exhibits mesopores of 21 nm width and a high storage modulus of 1.80 GPa. This mesoporous polyimide separator assists in the electrodeposition to form flat-top protrusions instead of sharp dendrites, therefore, allowing the safe cycling of lithium-metal batteries. This work is expected to advance the development of dendrite-suppressing strategies and contribute to the revival of lithium-metal batteries.

3D MXene-Based Flexible Network for High-Performance Pressure Sensor with a Wide Temperature Range

With the increasing popularity of smart wearable devices, flexible pressure sensors are highly desired in various complex application scenarios. A great challenge for existing flexible pressure sensors is to maintain high sensitivity over a wide temperature range, which is critical for their applications in harsh environments. Herein, a flexible piezoresistive sensor made of polyetherimide (PEI) fibrous network evenly covered with MXene nanosheets is reported to construct conductive pathways, showing ultrahigh sensitivity over a wide temperature range from -5 °C (sensitivity of 80 kPa^-1 ) to 150 °C (20 kPa^-1 ), low detection limit of 9 Pa, fast response time of 163 ms, outstanding durability over 10 000 cycles at room temperature, 2000 cycles at 100 °C and 500 cycles at -5 °C. The pressure sensor can monitor various human activities in real-time, apply to human-machine interaction, and measure pressure distribution. It also can sensitively respond to external mechanical stimuli at 150 °C and extremely low temperature (in liquid nitrogen). Moreover, the fibrous network exhibits an excellent Joule heating performance, which can reach 78 °C at an applied voltage of 12 V. Thus, the piezoresistive sensor has considerable potential for wearable garments and personal heating applications in harsh temperature conditions.

Progress on Polymer Dielectrics for Electrostatic Capacitors Application

Polymer dielectrics are attracting increasing attention for electrical energy storage owing to their advantages of mechanical flexibility, corrosion resistance, facile processability, light weight, great reliability, and high operating voltages. However, the dielectric constants of most dielectric polymers are less than 10, which results in low energy densities and limits their applications in electrostatic capacitors for advanced electronics and electrical power systems. Therefore, intensive efforts have been placed on the development of high-energy-density polymer dielectrics. In this perspective, the most recent results on the all-organic polymer dielectrics are summarized, including molecular structure design, polymer blends, and layered structured polymers. The challenges in the field and suggestions for future research on high-energy-density polymer dielectrics are also presented.