Bioinspired Remineralization of Artificial Caries Lesions Using PDMAEMA/Carbomer/Calcium Phosphates Hybrid Microgels

Dental caries remains one of the most prevalent bacterium-caused chronic diseases affecting both adults and children worldwide. The development of new materials for enhancing its remineralization is one of the most promising approaches in the field of advanced dental materials as well as one of the main challenges in non-invasive dentistry. The aim of the present study is to develop novel hybrid materials based on (PDMAEMA)/Carbomer 940 microgels with in situ deposited calcium phosphates (CaP) and to reveal their potential as a remineralization system for artificial caries lesions. To this purpose, novel PDMAEMA/Carbomer 940 microgels were obtained and their core–shell structure was revealed by transmission electron microscopy (TEM). They were successfully used as a matrix for in situ calcium phosphate deposition, thus giving rise to novel hybrid microgels. The calcium phosphate phases formed during the deposition process were studied by X-ray diffraction and infrared spectroscopy, however, due to their highly amorphous nature, the nuclear magnetic resonance (NMR) was the method that was able to provide reliable information about the formed inorganic phases. The novel hybrid microgels were used for remineralization of artificial caries lesions in order to prove their ability to initiate their remineralization. The remineralization process was followed by scanning electron microscopy (SEM), X-ray diffraction, infrared and Raman spectroscopies and all these methods confirmed the successful enamel rod remineralization upon the novel hybrid microgel application. Thus, the study confirmed that novel hybrid microgels, which could ensure a constant supply of calcium and phosphate ions, are a viable solution for early caries treatment.

Rheological design of thickened alcohol-based hand rubs

The handleability and sensory perception of hand sanitisers by consumers affect the hygiene outcome. Spillage may result in under-dosing and poor sensory properties can lead to under-utilisation. We first propose four principles (low runoff, spreadability, smoothness and non-stickiness) for designing the rheology of thickened alcohol-based hand rubs with acceptable handleability and hand feel. We then evaluate a commercial hand gel and a variety of simplified formulations thickened with microgels (Carbopol 974P, Carbopol Ultrez 20 and Sepimax Zen), or linear polymers (Jaguar HP 120 COS), and evaluate them against these design criteria. All four additives provide acceptable spreadability by shear thinning to η ≈ 10 - 1 Pa s at γ ˙ ∼ 10 3 s - 1 . Either the finite yield stress conferred by the microgels ( σ y ≳ 10 Pa ) or the increase in low-shear viscosity provided by the linear polymer ( η ≳ 1 Pa s at γ ˙ ≲ 0.1 s - 1 ) give rise to acceptably low runoff. However, the formulation using the linear polymer shows a filament breakage time of τ b ≈ 1 s in capillary rheology, which may result in stickiness and therefore a less than optimal hand feel.

Interactions of Crosslinked Polyacrylic Acid Polyelectrolyte Gels with Nonionic and Ionic Surfactants

The morphology and stability of surfactant-loaded polyelectrolyte gels are of great interest for a variety of personal care, cosmetic, and pharmaceutical products. However, the mechanisms of surfactant interactions with gel-forming polymers are poorly understood and experimentally challenging. The aim of this work is to explore in silico the specifics of surfactant absorption within polyelectrolyte gels drawing on the examples of typical non-ionic octaethylene glycol monooctyl ether (C₈E₈) and anionic sodium dodecyl sulfate (SDS) surfactants and polyacrylic acid modified with hydrophobic sidechains mimicking the practically important Carbopol polymer. Using the systematically parameterized coarse-grained dissipative particle dynamics models, we generate and characterize the equilibrium conformations and swelling of the polymer films in aqueous solutions with the surfactant concentrations varied up to the critical micelle concentration (cmc). We discover the striking difference in interactions of Carbopol-like polymers with nonionic and ionic surfactants under mildly acidic conditions. The sorption of C₈E₈ within the polymer film is found substantial. As the surfactant concentration increases, the polymer film swells and, close to cmc, becomes unstable due to the formation and growth of water pockets filled with surfactant micelles. Sorption of SDS at the same bulk concentrations is found much lower, with only about 1% of surfactant mass fraction achieved at cmc. As the SDS concentration increases further, a lamellae structure is formed within the film, which remains stable. Reduced swelling and higher stability indicate better prospects of using SDS-type surfactants with Carbopol-based gels in formulations for detergents and personal care products.

Carbomer microgels as model yield-stress fluids

The review presents current research results for Carbopol-based microgels as yield-stress materials, covering three aspects: chemical, physical and rheological. Such a joint three-aspect study has no analog in the literature. The chemical aspects of Carbopol polymers are presented in terms of a cross-linking polymerization of acrylic acid, their molecular structure, microgel formulation, polyacid dissociation and neutralization, osmotic pressure and associated immense microgel swelling. The physical characterization is focused on models of the shear-induced solid-to-liquid transition of microgels, which are formed of mesoscopic particles typical for soft matter materials. Models that describe interparticle effects are presented to explain the energy states of microgel particles at the mesoscale of scrutiny. Typical representatives of the models utilize attributes of jamming dispersions, micromechanical and polyelectrolyte reactions. Selected relationships that result from the models, such as scaling rules and nondimensional flow characteristics are also presented. The rheological part presents the discussion of problems of yield stress in 2D and 3D deformations, appearance and magnitude of the wall slip. The theory and characteristics of Carbopol microgel deformation in rotational rheometers are presented with graphs for the steady-state measurements, stress-controlled oscillation and two types of transient shear deformation. The review is concluded with suggestions for future research.

Effect of D-Mannitol on the Microstructure and Rheology of Non-Aqueous Carbopol Microgels

D-mannitol is a common polyol that is used as additive in pharmaceutical and personal care product formulations. We investigated its effect on the microstructure and rheology of novel non-aqueous Carbopol dispersions employing traditional and time-resolved rheological analysis. We considered two types of sample, (i) fresh (i.e., mannitol completely dissolved in solution) and aged (i.e., visible in crystalline form). The analysis of the intracycle rheological transitions that were observed for different samples revealed that, when completely dissolved in solution, mannitol does not alter the rheological behaviour of the Carbopol dispersions. This highlights that the chemical similarity of the additive with the molecules of the surrounding solvent allows preserving the swollen dimension and interparticle interactions of the Carbopol molecules. Conversely, when crystals are present, a hierarchical structure forms, consisting of a small dispersed phase (Carbopol) agglomerated around a big dispersed phase (crystals). In keeping with this microstructural picture, as the concentration of Carbopol reduces, the local dynamics of the crystals gradually start to control the integrity of the microstructure. Rheologically, this results in a higher elasticity of the suspensions at infinitesimal deformations, but a fragile yielding process at intermediate strains.

Acoustic bubble dynamics in a yield-stress fluid

Yield-stress fluids naturally trap small bubbles when their buoyancy applies an insufficient stress to induce local yielding of the material. Under acoustic excitation, trapped bubbles can be driven into volumetric oscillations and apply an additional local strain and stress that can trigger yielding and assist their release. In this paper we explore different regimes of microbubble oscillation and translation driven by an ultrasound field in a model yield-stress fluid, a Carbopol microgel. We first analyse the linear bubble oscillation dynamics to measure the local, high-frequency viscosity of the material. We then use acoustic pressure gradients to induce bubble translation and examine the elastic part of the response of the material below yielding. We find that, at moderate pressure amplitude, the additional stresses applied by volumetric oscillations and acoustic radiation forces do not lead to any detectable irreversible bubble motion. At high pressure amplitude, we observe non-spherical shape oscillations that result in erratic bubble motion. The critical pressures we observe differ from the predictions of a recent model of shape oscillations in soft solids. Based on our findings, we discuss possible reasons for the lack of bubble release in Carbopol and suggest other systems in which ultrasound-assisted bubble rise may be observed.

Oromucosal precursors of in loco hydrogels for wound-dressing and drug delivery in oral mucositis: Retain, resist, and release

Oromucosal films and tablets were developed as multifunctional biomaterials for the treatment of oral mucositis. These are intended to function as a hybrid, performing as a controlled drug delivery system and as a wound-dressing device. The dosage forms are precursors for in loco hydrogels that are activated by the saliva. An anti-inflammatory and anesthetic activity is attained from budesonide tripartite polymeric nanoparticles and lidocaine, while the polymeric network allows the protection and cicatrization of the wound. Different biomaterials and blends were investigated, focusing on the capacity to retain and resist on-site, as well as achieve a long-lasting controlled release. As the limiting factor, the choice was made according to the films' results. A polymer mix of Methocel™ K100M and Carbopol® (974P, EDT 2020, or Ultrez 10) blends were used. Overall, regrading critical factors, Carbopol® increased films' elasticity and flexibility, mucoadhesion, and the strength of the hydrogels, while higher concentrations led to thicker, more opaque, and lower strain resistance products. Whereas 974P and Ultrez 10 performed similarly, EDT 2020 led to uniformity problems and weaker films, hydrogels and bioadhesion. The optimized products were enhanced with sodium hyaluronate and drug-loaded for further characterization. Concerning the dosage form, the films' hydrogels were more resilient, while the tablets had higher mucoadhesiveness and longer swelling. Although through different networks and mechanisms, both dosage forms and grades revealed similar release profiles. A Case II time-evolving stereoselectivity for the 22R and 22S budesonide epimers was found, and Fickian-diffusion for lidocaine. Ultimately, the developed formulations show great potential to be used in OM management. Both of the selected grades at 0.6% displayed excellent performance, while Ultrez 10 can be preferable for the films' production due to its lower viscosity before neutralization and higher after activation. Where the tablets are easier to produce and offer better adhesion, the films are more customizable post-production and have higher rheological performance for wound-dressing.

Investigation of the swollen state of Carbopol molecules in non-aqueous solvents through rheological characterization

We explore how different types of solvent influence the rheological properties of non-aqueous Carbopol dispersions from the dilute to the jammed state. In novel non-aqueous formulations, polar solvents are used more and more frequently, because they can form Carbopol microgels without the need of any neutralizing agents. However, the swelling behaviour of Carbopol molecules in the absence of water, when ionic forces are weak, is still poorly understood. To this end, we study the swelling behaviour of Carbopol 974P NF in different polar solvents, i.e. glycerol, PEG400 and mixtures of the two solvents, by mapping the rheological behaviour of Carbopol suspensions from very dilute to highly concentrated conditions. The rheological study reveals that the onset of the jamming transition occurs at different critical polymer concentrations depending on the solvents used. Nevertheless, once the jammed state is reached, both elastic and yielding behaviours are scalable with the particle volume fraction. These results suggest that the type of solvent influences the final volume of the single Carbopol particles but does not alter the interactions between the particles. The final radius of the swollen particles is estimated from shear rheology measurements in dilute conditions, showing a decrease of the final swelling ratio of Carbopol molecules of almost 50% for PEG400 solutions, a result that confirms the shift to higher values of the critical jamming concentration obtained from linear viscoelasticity for the same solutions.

Development and In vitro Evaluation of Nifedipine Gel Formulations for Anorectal Applications

Objective:

Current study focuses on the formulation and characterization of lipophilic and hydrophilic gel formulations of nifedipine to treat anal fissure via anodermal application.

Methods:

Lipophilic gels were prepared with Aerosil grades as gelling agents in bulk oils. Polyethylene glycols, hydroxypropyl methylcellulose, and Carbopol® 974P were used as gelling agents in water and propylene glycol for forming hydrophilic gels. The effect of repeated Freeze-Thaw Cycles (FT-C) on microstructures of the gels was investigated by examining viscosity, rheology and textural properties. Aerosil 200 containing lipophilic gels exhibited thixotropic behavior with plastic flow properties and higher viscosities.

Result:

Accordingly, their compressibility and adhesiveness increased. FT-C caused notable changes in microstructures and textural properties of the lipophilic gels excluding the formulation containing Aerosil 200-in-isopropyl myristate. Among the hydrophilic gels, the viscosity of Carbopol® 974P gels increased depending on the amount of polymer, triethanolamine and water; these gels featured plastic flow without thixotropic behavior. Their compressibility and adhesiveness were higher than other gel formulations with stable post-FT-C characteristics. The higher flux values of nifedipine were observed from water containing Carbopol® 974P gel.

Conclusion:

The results of the stability tests showed that the Carbopol® 974P gel had a longer shelf life than the Aerosil 200-in-isopropyl myristate gel.