Preparation of polycarbonate/poly(acrylonitrile-butadiene-styrene)/mesoporous silica nanocomposite films and its rheological, mechanical, and sound absorption properties

Study of the Sound Absorption Properties of 3D-Printed Open-Porous ABS Material Structures

Noise pollution is a negative factor that affects our environment. It is, therefore, necessary to take appropriate measures to minimize it. This article deals with the sound absorption properties of open-porous Acrylonitrile Butadiene Styrene (ABS) material structures that were produced using 3D printing technology. The material’s ability to damp sound was evaluated based on the normal incidence sound absorption coefficient and the noise reduction coefficient, which were experimentally measured by the transfer function method using an acoustic impedance tube. The different factors that affect the sound absorption behavior of the studied ABS specimens are presented in this work. In this study, it was discovered that the sound absorption properties of the tested ABS samples are significantly influenced by many factors, namely by the type of 3D-printed, open-porous material structure, the excitation frequency, the sample thickness, and the air gap size behind the sound-absorbing materials inside the acoustic impedance tube.

Structural Design and Sound Absorption Properties of Nitrile Butadiene Rubber-Polyurethane Foam Composites with Stratified Structure

Sound absorbing composites with stratified structures, including double-layer and sandwich structures, were prepared through the combination of nitrile butadiene rubber (NBR) and polyurethane foam (PUFM). The effects of the thickness ratio of layers, different stratified structures and the variety of fillers on the sound absorption performance of the NBR-PUFM composites and the sound absorption mechanism were studied. The results show that the NBR-PUFM composite with a sandwich structure and thickness ratio of 1:8:1 displays good sound absorption, which could be improved further by adding fillers. Because the airflow resistivity, resonance absorption, interface dissipation and interface reflection were combined organically in the sandwich structure, the composites show excellent low-frequency sound absorption performance. Moreover, the composite also has advantages in cost and functionalization aspects.