Effect of interface and confinement size on the crystallization behavior of PLLA confined in coaxial electrospun fibers

Thermal Treatment Induced Crystal Development and Crystal Orientation Change in Electrospun Coaxial Fibers Comprising Dual Crystalline Polymers

This study investigates the crystallization behavior of electrospun coaxial fibers composed of crystalline poly(ethylene oxide) (PEO) in the core and crystalline poly(L-lactide) (PLLA) in the sheath. The influence of cold crystallization temperature and premelting temperature on the crystallization of PEO and PLLA is investigated. At a cold crystallization temperature of ≤60 °C, PLLA remained immobile. PEO crystallization is hard-confined, leading to a low degree of crystallinity. At a cold crystallization temperature of >60 °C, PEO melted, whereas PLLA crystallized. An increase in cold crystallization temperature results in an increase in the crystallite size and crystallinity of PLLA. Furthermore, the melt crystallization behavior of PEO in the coaxial fibers is strongly influenced by its premelting temperature and crystallization temperature. A higher premelting temperature leads to enhanced interdiffusion between PEO and PLLA. This increased confinement results in a decrease in PEO's crystallizability. Additionally, premelting relaxes the PEO chains, causing a shift in crystal orientation from parallel to the fiber axis (observed in as-electrospun fibers) to perpendicular to the fiber axis (observed in melt-crystallized fibers). Moreover, at a low melt crystallization temperature, demixing between PEO and PLLA is observed. This, coupled with a higher degree of supercooling, leads to an increase in PEO's crystallizability.

Construction of a ternary system: a strategy for the rapid formation of porous poly(lactic acid) fibers

Combining electrospinning technology with nonsolvent induced phase separation (ESP-NIPS), 10 wt% poly(lactic acid) (PLA) spinning solutions are prepared by using chloroform as a good solvent and absolute ethanol as a nonsolvent. The “PLA/CHCl₃/C₂H₅OH” ternary system is constituted to realize the rapid preparation of porous-structured PLA fibers. The morphologies, thermal properties and crystalline structures of the obtained fibers are characterized and the rapid forming mechanism of PLA porous fibers is investigated and discussed. The interaction parameters between the substances of the “PLA/CHCl₃/C₂H₅OH” ternary system, binodal line, spinodal line and critical point are obtained by theoretical calculation and experiment, and the “PLA/CHCl₃/C₂H₅OH” ternary phase diagram model is established. The results show that, when the mass ratio of chloroform/ethanol is around 75/25, the rapid “in situ” formation of the PLA fibers can be realized with porous structures within 5–10 s. The establishment of a “nonsolvent-solvent–polymer” ternary phase diagram model has laid a theoretical foundation for the rapid formation of polymer porous fibers by ESP-NIPS. The ESP-NIPS for the porous PLA fibers preparation provides a new resolution for the rapid formation of porous polymer materials, which is vital to further expand the application of electrospun fibers in emergency situations such as isolation, protection, insulation and flame retardant usage.

Combining electrospinning technology with ESP-NIPS, using chloroform as a solvent and absolute ethanol as a nonsolvent, poly(lactic acid) porous fibres are prepared within 5–10 s. This preparation provides a new resolution for the rapid formation of porous polymer materials.

Porous Fiber Processing and Manufacturing for Energy Storage Applications

The objective of this article is to provide an overview on the current development of micro- and nanoporous fiber processing and manufacturing technologies. Various methods for making micro- and nanoporous fibers including co-electrospinning, melt spinning, dry jet-wet quenching spinning, vapor deposition, template assisted deposition, electrochemical oxidization, and hydrothermal oxidization are presented. Comparison is made in terms of advantages and disadvantages of different routes for porous fiber processing. Characterization of the pore size, porosity, and specific area is introduced as well. Applications of porous fibers in various fields are discussed. The emphasis is put on their uses for energy storage components and devices including rechargeable batteries and supercapacitors.

Functionalized Boron Nitride Nanosheets/Poly(l-lactide) Nanocomposites and Their Crystallization Behavior

In this work, hydroxyl-functionalized boron nitride nanosheet (OH-BNNS) was prepared and was blended with poly(l-lactide) (PLLA) to yield PLLA/OH-BNNS nanocomposites with excellent dispersion of OH-BNNS via the interaction of carbonyl in PLLA and hydroxyl in OH-BNNS. The effects of OH-BNNS on the crystallization and melting behaviors, isothermal crystallization kinetics, macroscopic crystal morphology and crystal structure of PLLA were studied by means of various techniques. The addition of OH-BNNS nanofillers can effectively accelerate the crystallization of PLLA and enhance the nucleation density, leading to a smaller spherulite size, increased crystallinity, a more obvious crystallization peak upon cooling but weakened cold crystallization behavior upon heating. Low OH-BNNS loading can increase the relative content of α-crystal, but the relative content of less perfect α′-crystal is increased at high OH-BNNS loading due to the strong interaction between PLLA and OH-BNNS.

Surfactant-assisted-water-exposed versus surfactant-aqueous-solution-exposed electrospinning of novel super hydrophilic Polycaprolactone-based fibers: Cell culture studies

Blend electrospun scaffolds composed of Polycaprolactone and Pluronic are suitable for bone tissue engineering due to their excellent biocompatibility and hydrophilicity. However, exceeding from certain amounts of Pluronic, surface enrichment of this polymer leads to segregation of Pluronic chains within the fiber, endangering the integrity and mechanical properties of the scaffold. In this article, a novel method of blend electrospinning has been employed using a parallel water supply, positioning the Pluronic chains on the surface, thus enhancing the miscibility within the fibers. Water uptake test revealed the super hydrophilicity of obtained scaffolds. Atr-FTIR and X-ray photoelectron spectroscopy verified a higher percentage of Pluronics on the surface in comparison with conventional blend electrospinning. Tensile test demonstrated improved mechanical properties of the modified scaffolds. The results of cytocompatibility tests have also revealed enhanced viability of cells on these scaffolds confirming their great promise for clinical applications. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1204-1212, 2019.