Improved rheological properties and stability of multiwalled carbon nanotubes/polymer in harsh environment

A review on application of nanoparticles for EOR purposes: history and current challenges

Applications of nanotechnology in several fields of petroleum industry, e.g., refinery, drilling and enhanced oil recovery (EOR), have attracted a lot of attention, recently. This research investigates the applications of nanoparticles in EOR process. The potential of various nanoparticles, in hybrid and bare forms for altering the state of wettability, reducing the interfacial tension (IFT), changing the viscosity and activation of other EOR mechanisms are studied based on recent findings. Focusing on EOR, hybrid applications of nanoparticles with surfactants, polymers, low-salinity phases and foams are discussed and their synergistic effects are evaluated. Also, activated EOR mechanisms are defined and specified. Since the stabilization of nanofluids in harsh conditions of reservoir is vital for EOR applications, different methods for stabilizing nanofluids through EOR procedures are reviewed. Besides, a discussion on different functional groups of NPs is represented. Later, an economic model for evaluation of EOR process is examined and "Hotelling" method as an appropriate model for investigation of economic aspects of EOR process is introduced in detail. The findings of this study can lead to better understanding of fundamental basis about efficiency of nanoparticles in EOR process, activated EOR mechanisms during application of nanoparticles, selection of appropriate nanoparticles, the methods of stabilizing and economic evaluation for EOR process with respect to costs and outcomes.

Date-Leaf Carbon Particles for Green Enhanced Oil Recovery

Green enhanced oil recovery (GEOR) is an environmentally friendly enhanced oil recovery (EOR) process involving the injection of green fluids to improve macroscopic and microscopic sweep efficiencies while boosting tertiary oil production. Carbon nanomaterials such as graphene, carbon nanotube (CNT), and carbon dots have gained interest for their superior ability to increase oil recovery. These particles have been successfully tested in EOR, although they are expensive and do not extend to GEOR. In addition, the application of carbon particles in the GEOR method is not well understood yet, requiring thorough documentation. The goals of this work are to develop carbon nanoparticles from biomass and explore their role in GEOR. The carbon nanoparticles were prepared from date leaves, which are inexpensive biomass, through pyrolysis and ball-milling methods. The synthesized carbon nanomaterials were characterized using the standard process. Three formulations of functionalized and non-functionalized date-leaf carbon nanoparticle (DLCNP) solutions were chosen for core floods based on phase behavior and interfacial tension (IFT) properties to examine their potential for smart water and green chemical flooding. The carboxylated DLCNP was mixed with distilled water in the first formulation to be tested for smart water flood in the sandstone core. After water flooding, this formulation recovered 9% incremental oil of the oil initially in place. In contrast, non-functionalized DLCNP formulated with (the biodegradable) surfactant alkyl polyglycoside and NaCl produced 18% more tertiary oil than the CNT. This work thus provides new green chemical agents and formulations for EOR applications so that oil can be produced more economically and sustainably.

Nanomaterials for subsurface application: study of particles retention in porous media

The ability to transport nanoparticles through porous media has interesting engineering applications, notably in reservoir capacity exploration and soil remediation. A series of core-flooding experiments were conducted for quantitative analysis of functionalized TiO2 nanoparticles transport through various porous media including calcite, dolomite, silica, and limestone rocks. The adsorption of surfactants on the rock surface and nanoparticle retention in pore walls were evaluated by chemical oxygen demand (COD) and UV–Vis spectroscopy. By applying TiO2 nanoparticles, 49.3 and 68.0 wt.% of surfactant adsorption reduction were observed in pore walls of dolomite and silica rock, respectively. Not surprisingly, the value of nanoparticle deposition for dolomite and silica rocks was near zero, implying that surfactant adsorption is proportional to nanoparticle deposition. On the other hand, surfactant adsorption was increased for other types of rock in presence of nanoparticles. 5.5, 13.5, and 22.4 wt.% of nanoparticle deposition was estimated for calcite, black and red limestone, respectively. By making a connection between physicochemical rock properties and nanoparticle deposition rates, we concluded that the surface roughness of rock has a significant influence on mechanical trapping and deposition of nanoparticles in pore-throats.

Stabilization of Polymer Nanocomposites in High-Temperature and High-Salinity Brines

Stabilization of polymer nanocomposites in aqueous environment with high salinity has been a constant challenge for their applications. This work aimed to improve the stability of graphene oxide (GO) polyacrylamide nanocomposites at high-temperature and high-ionic-strength brines. GO was synthesized via a modified Hummers' method and the copolymer of acrylamide (COPAM) was obtained via free-radical polymerization. The covalent functionalization of COPAM with the partially reduced GO (rGO) was successfully achieved. 1,3-Propane sultone was used to further functionalize the obtained rGO-COPAM composites to accomplish the zwitterionic character on the rGO-COPAM surface to get a material with excellent temperature stability and dispersibility in the presence of high ionic strength brines. The synthesized materials were characterized by 1H NMR, gel permeation chromatography, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy analysis, and so forth. The thermal stability of the dispersion at 80 °C for 120 days was observed by visual inspection and spectroscopic analysis. The results showed that the zwitterionic polymer produced excellent brine stability with GO nanosheets and suggested promising applications of zwitterionic polyacrylamide-GO systems especially for enhanced oil recovery.