Synthesis of magnetic nanocomposite microparticles for binding of chlorinated organics in contaminated water sources

The Impact of Solution Ionic Strength, Hardness, and pH on the Sorption Efficiency of Polychlorinated Biphenyls in Magnetic Nanocomposite Microparticle (MNM) Gels

Environmental conditions of groundwater and surface water greatly vary as a function of location. Factors such as ionic strength, water hardness, and solution pH can change the physical and chemical properties of the nanocomposites used in remediation and the pollutants of interest. In this work, magnetic nanocomposite microparticle (MNM) gels are used as sorbents for remediation of PCB 126 as model organic contaminant. Three MNM systems are used: curcumin multiacrylate MNMs (CMA MNMs), quercetin multiacrylate MNMs (QMA MNMs), and polyethylene glycol-400-dimethacrylate MNMs (PEG MNMs). The effect of ionic strength, water hardness, and pH were studied on the sorption efficiency of the MNMs for PCB 126 by performing equilibrium binding studies. It is seen that the ionic strength and water hardness have a minimal effect on the MNM gel system sorption of PCB 126. However, a decrease in binding was observed when the pH increased from 6.5 to 8.5, attributed to anion-π interactions between the buffer ions in solution and the PCB molecules as well as with the aromatic rings of the MNM gel systems. Overall, the results indicate that the developed MNM gels can be used as magnetic sorbents for polychlorinated biphenyls in groundwater and surface water remediation, provided that the solution pH is controlled.

Robust and multifunctional natural polyphenolic composites for water remediation

The scarcity of clean water has become a global environmental problem which constrains the development of public health, economy, and sustainability. In recent years, natural polyphenols have drawn increasing interests as promising platforms towards diverse water remediation composites and devices, owing to their abundant and renewable resource in nature, highly active surface chemistry, and multifunctionality. This review aims to summarize the most recent advances and highlights of natural polyphenol-based composite materials (e.g., nanofibers, membranes, particles, and hydrogels) for water remediation, by focusing on their structural and functional features, as well as their diversified applications including membrane filtration, solar distillation, adsorption, advanced oxidation processes, and disinfection. Finally, the future challenges in this field are also prospected. It is anticipated that this review will provide new opportunities towards the future development of natural polyphenols and other kinds of naturally occurring molecules in water purification applications.

Entropy analysis and grey cluster analysis of multiple indexes of 5 kinds of genuine medicinal materials

5 kinds of genuine medicinal materials, including Diding (Latin name: Corydalis bungeana Turcz), Purslane (Latin name: Portulaca oleracea L.), straw sandal board (Latin name: Hoya carnosa (L.f.) R. Br), June snow (Latin name: Serissa japonica (Thunb.) Thunb.), pine vine rattan (Latin name: Lycopodiastrum casuarinoides (Spring) Holub. [Lycopodium casuarinoides Spring]), were selected as the research objects. The combustion heat, thermo gravimetric parameters, and fat content, calcium content, trace element content, ash content of 5 kinds of genuine medicinal materials were measured. The combustion heat, differential thermal gravimetric analysis, fat content, calcium content, trace elements content, and ash content of 5 kinds of genuine medicinal materials were used to build a systematic multi-index evaluation system by gray pattern recognition and grey correlation coefficient cluster analysis, which can make up for the gaps in this area and provide scientific basis and research significance for the study of genuine medicinal materials quality. The results showed that the order of combustion heat of 5 kinds of genuine medicinal materials, including Diding, Purslane, straw sandal board, June snow, pine vine rattan, was Diding > June snow > straw sandal board > Purslane > pine vine rattan, the order of fat content (%) of 5 kinds of genuine medicinal materials was straw sandal board > Diding > pine vine rattan > June snow > Purslane, the order of calcium content (%) was pine vine rattan > June snow > Purslane > straw sandal board > Diding, the order of ash content was June snow > Purslane > straw sandal board > pine vine rattan > Diding. From the analysis of thermogravimetric analysis results and thermogravimetric combustion stability, the order of combustion stability of 5 kinds of genuine medicinal materials was June snow > pine Vine rattan > straw sandal board > Diding > Portulaca oleracea. The order of the content of 12 trace elements in 5 kinds of genuine medicinal materials, in terms of trace element content, June snow contains the highest trace elements in all samples. According to combustion heat, combustibility (combustion stability of genuine medicinal materials), fat, calcium, ash, trace element content, the comprehensive evaluation results of multi-index analysis constructed by gray correlation degree, gray correlation coefficient factor analysis, and gray hierarchical cluster analysis showed that the comprehensive evaluation multi-index order of 5 genuine medicinal materials, including Diding, Purslane, straw sandal board, June snow and pine vine rattan, was June snow > straw sandal board > Diding > Purslane > pine vine rattan. Therefore, the comprehensive evaluation results of the quality of genuine medicinal materials selected in this study were June snow the best, followed by straw sandal board. This research has important theoretical and practical significance for the multi-index measurement and comprehensive evaluation of genuine medicinal materials, and can provide scientific basis and research significance for the research of multi-index quality control of genuine medicinal material.

Hydrogels and Hydrogel Nanocomposites: Enhancing Healthcare through Human and Environmental Treatment

Humans are constantly exposed to exogenous chemicals throughout their life, which can lead to a multitude of negative health impacts. Advanced materials can play a key role in preventing or mitigating these impacts through a wide variety of applications. The tunable properties of hydrogels and hydrogel nanocomposites (e.g., swelling behavior, biocompatibility, stimuli responsiveness, functionality, etc.) have deemed them ideal platforms for removal of environmental contaminants, detoxification, and reduction of body burden from exogenous chemical exposures for prevention of disease initiation, and advanced treatment of chronic diseases, including cancer, diabetes, and cardiovascular disease. In this review, three main junctures where the use of hydrogel and hydrogel nanocomposite materials can intervene to positively impact human health are highlighted: 1) preventing exposures to environmental contaminants, 2) prophylactic treatments to prevent chronic disease initiation, and 3) treating chronic diseases after they have developed.

Effect of Atom Transfer Radical Polymerization Reaction Time on PCB Binding Capacities of Styrene-CMA/QMA Core-Shell Iron Oxide Nanoparticles

Water pollution continues to be one of the greatest challenges humankind faces worldwide. Increasing population growth, fast industrialization and modernization risk the worsening of water accessibility and quality in the coming years. Nanoadsorbents have steadily gained attention as remediation technologies that can meet stringent water quality demands. In this work, core-shell magnetic nanoparticles (MNPs) comprised of an iron oxide magnetic core and a styrene based polymer shell were synthesized via surface initiated atom transfer radical polymerization (SI-ATRP), and characterized them for their binding of polychlorinated biphenyls (PCBs), as model organic contaminants. Acrylated plant derived polyphenols, curcumin multiacrylate (CMA) and quercetin multiacrylate (QMA), and divinylbenzene (DVB) were incorporated into the polymeric shell to create high affinity binding sites for PCBs. The affinity of these novel materials for PCB 126 was evaluated and fitted to the nonlinear Langmuir model to determine binding affinities (KD). The KD values obtained for all the MNP systems showed higher binding affinities for PCB 126 that carbonaceous materials, like activated carbon and graphene oxide, the most widely used adsorption materials for water remediation today. The effect of increasing ATRP reaction time on the binding affinity of MNPs demonstrated the ability to tune polymer shell thickness by modifying the reaction extent and initial crosslinker concentrations in order to maximize pollutant binding. The enhancement in binding affinity and capacity for PCB 126 was demonstrated by the use of hydrophobic, aromatic rich molecules like styrene, CMA, QMA and DVB, within the polymeric shell provides more sites for π-π interactions to occur between the MNP surface and the PCB molecules. Overall, the high affinities for PCBs, as model organic pollutants, and magnetic capabilities of the core-shell MNPs synthesized provide a strong rationale for their application as nanoadsorbents in the environmental remediation of specific harmful contaminants.