Efficient Aliphatic C−H Bond Oxidation Catalyzed by Manganese Complexes with Hydrogen Peroxide

A manganese-based catalyst system for general oxidation of unactivated olefins, alkanes, and alcohols

Non-noble metal-based catalyst systems consisting of inexpensive manganese salts, picolinic acid and various heterocycles enable epoxidation of the challenging (terminal) unactivated olefins, selective C-H oxidation of unactivated alkanes, and O-H oxidation of secondary alcohols with aqueous hydrogen peroxide. In the presence of the in situ generated optimal manganese catalyst, epoxides are generated with up to 81% yield from alkenes and ketone products with up to 51% yield from unactivated alkanes. This convenient protocol allows the formation of the desired products under ambient conditions (room temperature, 1 bar) by employing only a slight excess of hydrogen peroxide with 2,3-butadione as a sub-stoichiometric additive.

Electrochemical oxo-functionalization of cyclic alkanes and alkenes using nitrate and oxygen

Direct functionalization of C(sp³)-H bonds allows rapid access to valuable products, starting from simple petrochemicals. However, the chemical transformation of non-activated methylene groups remains challenging for organic synthesis. Here, we report a general electrochemical method for the oxidation of C(sp³)-H and C(sp²)-H bonds, in which cyclic alkanes and (cyclic) olefins are converted into cycloaliphatic ketones as well as aliphatic (di)carboxylic acids. This resource-friendly method is based on nitrate salts in a dual role as anodic mediator and supporting electrolyte, which can be recovered and recycled. Reducing molecular oxygen as a cathodic counter reaction leads to efficient convergent use of both electrode reactions. By avoiding transition metals and chemical oxidizers, this protocol represents a sustainable oxo-functionalization method, leading to a valuable contribution for the sustainable conversion of petrochemical feedstocks into synthetically usable fine chemicals and commodities.

Trading Symmetry for Stereoinduction in Tetradentate, non-C2 -Symmetric Fe(II)-Complexes for Asymmetric Catalysis

A series of stereogenic-at-metal iron complexes comprising a non-C₂ -symmetric chiral topology is introduced and applied to asymmetric 3d-transition metal catalysis. The chiral iron(II) complexes are built from chiral tetradentate N4-ligands containing a proline-derived amino pyrrolidinyl backbone which controls the relative (cis-α coordination) and absolute metal-centered configuration (Λ vs. Δ). Two chloride ligands complement the octahedral coordination sphere. The modular composition of the tetradentate ligands facilitates the straightforward incorporation of different terminal coordinating heteroaromatic groups into the scaffold. The influence of various combinations was evaluated in an asymmetric ring contraction of isoxazoles to 2H-azirines revealing that a decrease of symmetry is beneficial for the stereoinduction to obtain chiral products in up to 99 % yield and with up to 92 % ee. Conveniently, iron catalysis is feasible under open flask conditions with the bench-stable dichloro complexes exhibiting high robustness towards oxidative or hydrolytic decomposition. The versatility of non-racemic 2H-azirines was subsequently showcased with the conversion into a variety of quaternary α-amino acid derivatives.

Study of Cyclohexane and Methylcyclohexane Functionalization Promoted by Manganese(III) Compounds

Alkane functionalization using safe and low-energy processes is of great interest to industry and academia. Aiming to contribute to the process of saturated hydrocarbon functionalization, we have studied a set of three manganese(III) complexes as catalysts for promoting the oxidation of saturated hydrocarbons (cyclohexane and methylcyclohexane) in the presence of hydrogen peroxide or trichloroisocyanuric acid (TCCA). The mononuclear manganese(III) compounds were prepared using the ligands H2LMet4 (6,6’-((1,4-diazepane-1,4-diyl)bis(methylene))bis(2,4-dimethylphenol), H2salen (2,2’-((1E,1’E)-(ethane-1,2-diylbis(azaneylylidene))bis(methaneylylidene))diphenol) and H2salan (2,2’-((ethane-1,2-diylbis(azanediyl))bis(methylene))diphenol). The catalytic processes were carried out in acetonitrile at 25 and 50 °C for 24 h. The increase in the temperature was important to get a better conversion. The compounds did not promote cyclohexane oxidation in the presence of H2O2. However, they were active in the presence of TCCA, employing a ratio of 1000:333:1 equivalents of the substrate:TCCA:catalyst. The best catalytic activity was shown by the compound [Mn(salen)Cl], reaching conversions of 14.5 ± 0.3% (25 °C) and 26.3 ± 1.1% (50 °C) (yield for chlorocyclohexane) and up to 12.1 ± 0.5% (25 °C) and 29.8 ± 2.2% (50 °C) (total yield for the mixture of the products 1-chloro-4-methylcyclohexane, 3-methylcyclohexene and 1-methylcyclohexene). The interaction of the catalysts with TCCA was studied using electron paramagnetic resonance (EPR), suggesting that the catalysts [Mn(LMet4)Cl] and [Mn(salan)Cl] act via a different mechanism from that observed for [Mn(salen)Cl].

Hydrocarbon Oxidation Depth: H2O2/Cu2Cl4·2DMG/CH3CN System

The oxidation of hydrocarbons of different structures under the same conditions is an important stage in the study of the chemical properties of both the hydrocarbons themselves and the oxidation catalysts. In a 50% H2O2/Cu2Cl4·2DMG/CH3CN system, where DMG is dimethylglyoxime (Butane-2,3-dione dioxime), at 50 °C under the same or similar conditions, we oxidized eleven RH hydrocarbons of different structures: mono-, bi- and tri-cyclic, framework and aromatic. To compare the composition of the oxidation products of these hydrocarbons, we introduced a new quantitative characteristic, “distributive oxidation depth D(O), %” and showed the effectiveness of its application. The adiabatic ionization potentials (AIP) and the vertical ionization potentials (VIP) of the molecules of eleven oxidized and related hydrocarbons were calculated using the DFT method in the B3LYP/TZVPP level of theory for comparison with experimental values and correlation with D(O). The same calculations of AIP were made for the molecules of the oxidant, solvent, DMG, related compounds and products. It is shown that component X, which determines the mechanism of oxidation of hydrocarbons RH with AIP(Exp) ≥ AIP(X) = 8.55 ± 0.03 eV, is a trans-DMG molecule. Firstly theoretically estimated experimental values of AIP(trans-DMG) = 8.53 eV and AIP(cis-DMG) = 8.27 eV.

Vanadium(VIV)-Porphyrin-Based Metal-Organic Frameworks for Synergistic Bimetallic Activation of Inert C(sp3)-H Bonds

Activation and selective functionalization of inert C(sp³)-H bonds remain one of the most challenging tasks in current synthetic chemistry. Herein, by decorating vanadium(V^IV)-porphyrin into metal-organic frameworks (MOFs) to stabilize the active tertbutyl peroxide radical, we reported a new approach to accomplish inert C(sp³)-H bond activation by a synergistic bimetallic strategy via a hydrogen atom transfer process under mild conditions. The stabilized peroxide radical by V^IV-porphyrin-based MOFs abstracted a hydrogen atom from the inert C(sp³)-H bonds for direct oxidization transformation utilizing environmentally friendly oxygen. Taking advantage of the high stability of Zr₆ clusters, the new Zr-MOF was recyclable six times without a conversion efficiency decrease. From this foundation, {Mn₃(μ₃-O)} cluster nodes with potential unsaturated coordinated sites were introduced into MOFs to replace Zr₆ clusters, realizing the pre-activation of substrates through the interaction between Mn nodes and substrates. The synergistic bimetallic activation effect of V^IV-porphyrin and Mn nodes dramatically promoted the conversion efficiency and product selectivity for inert C(sp³)-H bond functionalization.

Sustainable Synthesis of 2-Hydroxymethylbenzimidazoles using D-Fructose as a C2 Synthon

D-fructose, a biomass-derived carbohydrate has been identified as an environmentally benign C₂ synthon in the preparation of synthetically useful 2-hydroxymethylbenzimidazole derivatives by coupling with 1,2-phenylenediamines. Proof of concept was established by synthesizing 23 examples using BF₃ .OEt₂ (20 mol%), TBHP (5.5 M, decane) (1.0 equiv.) in CH₃ CN at 90 °C for 1 h. The pivotal features of this method include metal-free conditions, short time, good functional group tolerance, gram scale feasibility and the synthesis of benzimidazole fused 1,4-oxazine. Control studies with conventional C₂ synthons did not produce the desired product, thus suggesting a new reaction pathway from D-fructose.

Site and Enantioselective Aliphatic C-H Oxidation with Bioinspired Chiral Complexes

Selective oxidation of aliphatic C-H bonds stands as an unsolved problem in organic synthesis, with the potential to offer novel paths for preparing molecules of biological interest. The quest for reagents that can perform this class of reactions finds oxygenases and their mechanisms of action as inspiration motifs. Among the numerous families of synthetic catalysts that have been explored, complexes with linear tetraazadentate ligands combining two aliphatic amines and two aromatic amine heterocycles display a structural versatility proven instrumental in the design of C-H oxidation reactions showing site and enantioselectivities, not accessible by conventional oxidants. This manuscript makes a review of recent advances in the field.

Synthesis and Structure of Fluorinated (Benzo[d]imidazol-2-yl)methanols: Bench Compounds for Diverse Applications

A simple and general approach to the synthesis (from commercial precursors) of eight out of nine possible (benzo[d]imidazol-2-yl)methanols fluorinated on the benzene ring is reported. Molecular and crystalline structures of most compounds were solved by X-ray diffraction analysis. This made it possible to reveal the influence of the number and arrangement of fluorine atoms in the benzene cycle on the formation of intermolecular hydrogen bonds. It was found that the more fluorine atoms are present in a compound, the higher the dimensionality of the H-bonded structure is. Moreover, the presence of fluorine atoms in the synthesized compounds leads to the emergence of C–F…π interactions affecting crystal packing. The synthesized fluorinated (benzo[d]imidazol-2-yl)methanols may serve as excellent bench compounds for the synthesis of a systematic series of fluorine-containing derivatives to study structure–property correlations in various fields of research from medicine to materials science.

MnO2 @Fe3 O4 Magnetic Nanoparticles as Efficient and Recyclable Heterogeneous Catalyst for Benzylic sp3 C-H Oxidation

Herein, we report a highly chemoselective and efficient heterogeneous MnO₂ @Fe₃ O₄ MNP catalyst for the oxidation of benzylic sp³ C-H group of ethers using TBHP as a green oxidant to afford ester derivatives in high yield under batch/continuous flow module. This catalyst was also effective for the benzylic sp³ C-H group of methylene derivatives to furnish the ketone in high yield which can be easily integrated into continuous flow condition for scale up. The catalyst is fully characterized by spectroscopic techniques and it was found that 0.424 % MnO₂ @Fe₃ O₄ catalyzes the reaction; the magnetic nanoparticles of this catalyst could be easily recovered from the reaction mixture. The recovered catalyst was recycled for twelve cycles without any loss of the catalytic activity. The advantages of MnO₂ @Fe₃ O₄ MNP are its catalytic activity, easy preparation, recovery, and recyclability, gram scale synthesis with a TOF of up to 14.93 h^-1 and low metal leaching during the reaction.

Bioinspired Manganese and Iron Complexes for Enantioselective Oxidation Reactions: Ligand Design, Catalytic Activity, and Beyond

The development of efficient methods for the enantioselective oxidation of organic molecules continues to be an important goal in organic synthesis; in particular, the use of earth-abundant metal catalysts and environmentally friendly oxidants in catalytic asymmetric oxidation reactions has attracted significant interest over the last several decades. In nature, metalloenzymes catalyze a wide range of oxidation reactions by activating dioxygen under mild conditions. Inspired by selective and efficient oxidation reactions catalyzed by metalloenzymes, researchers have developed a number of synthetic model compounds that mimic the functionality of metalloenzymes. Among the reported biomimetic model compounds, tetradentate aminopyridine (N4) ligands have emerged as appealing frameworks because of their easy synthesis and facile diversification, and their complexes with metals such as Fe and Mn have proven to be versatile and powerful catalysts for a variety of (enantioselective) oxidation reactions. In this Account, we describe our efforts on the design of chiral N4 ligands and the use of their manganese and iron complexes in asymmetric oxidation reactions with H₂O₂ as the terminal oxidant, aiming to show general strategies for asymmetric oxidation reactions that can guide the rational design of ligands and relevant metal catalysts. In studies of manganese catalysts, the aryl-substituted (R,R)-mcp [mcp = N,N'-dimethyl-N,N'-bis(pyridine-2-ylmethyl)cyclohexane-1,2-diamine] manganese complexes exhibited high enantioselectivity in the asymmetric epoxidation (AE) of various olefins with H₂O₂ while requiring stoichiometric acetic acid as an additive for the activation of H₂O₂. To address this issue, we established bulkier N4 ligands for this catalytic system in which a catalytic amount of sulfuric acid enables the manganese-complex-catalyzed AE with improved stereocontrol and efficiency. In addition, this system was found to be active for the oxidative kinetic resolution of secondary alcohols. Further exploration of the structure-reactivity relationships has shown that aminobenzimidazole N4 ligands derived from l-proline, in which the conventional pyridine donors are replaced by benzimidazoles, act as promising ligands. These novel C₁-symmetric manganese catalysts showed dramatically improved activities with unprecedented turnover numbers in the AE reactions. Notably, this class of manganese complexes can catalyze the oxidation of the C-H bonds of spirocyclic hydrocarbons and spiroazacyclic compounds in a highly enantioselective manner, providing ready access to chiral spirocyclic β,β'-diketones and spirocyclic alcohols. Remarkably, iron catalysts with these chiral N4 ligands are effective for AE of olefins, enabling rare examples of highly enantioselective syntheses of epoxides by the iron catalysts. Finally, mechanistic studies provide valuable insights into the roles of the carboxylic acid and sulfuric acid in the catalytic oxidation reactions. Thus, the results described in this Account have demonstrated the importance of tunability and compatibility of the ligands for the development of efficient oxidation catalysts with earth-abundant transition metals and environmentally benign oxidants, and we hope that our study will pave the way for the discovery of efficient oxidation catalysis.

A Cu-Doped ZIF-8 metal organic framework as a heterogeneous solid catalyst for aerobic oxidation of benzylic hydrocarbons

Cu(ii) ions doped into ZIF-8 MOFs are shown to activate C–H bonds in benzylic hydrocarbons to their corresponding alcohol/ketone products.