Electroporation optimization to deliver plasmid DNA into dental follicle cells

Electroporation-based CRISPR gene editing in adult buffalo fibroblast cells

Electroporation is a widely used method for delivering CRISPR components into cells; however, it presents challenges when applied to difficult-to-transfect cells like adult buffalo fibroblasts. In this study, the ITGB2 gene (encoding the CD18 protein), plays vital for cellular adhesion and immune responses, was selected for editing experiments. To optimize electroporation conditions, we investigated parameters such as electric field strength, pulse duration, plasmid DNA amount, cuvette type, and cell type. The best transfection rates were obtained in a 4 mm gap cuvette with a single 20-millisecond pulse of 300 V using a 10 μg of all-in-one CRISPR plasmid for 106 cells in 100 μL of electroporation buffer. Increasing DNA quantity enhanced transfection rates but compromised cell viability. The 4 mm cuvette gap had high transfection rates than the 2 mm gap, and newborn cells exhibited higher transfection rates than adult cells. We achieved transfection rates of 10-12% with a cell viability of 25-30% for adult fibroblast cells. Subsequently, successfully edited the ITGB2 gene with a 30% editing efficiency, confirmed through various analysis methods, including T7E1 assay, TIDE and ICE analysis, and TA cloning. In conclusion, electroporation conditions reported here can edit buffalo gene(s) for various biotechnological research applications.

Optimization of piggyBac Transposon System Electrotransfection in Sheep Fibroblasts

Electroporation is a non-viral mediated transfection technique, which has the advantages of being harmless, easy to operate, and less expensive. This transfection method can be used for almost all cell types and has gradually become the preferred transfection method for mammalian gene editing. However, further improvements are needed in electroporation efficiency. There is no universal standard electrotransfection step for different types of cells, and the inappropriate electroporation parameters will result in a low transfection efficiency and high cell mortality. Here, we systematically optimized the electrotransfection parameters of piggyBac transposon system into sheep fetal fibroblasts for the first time. We found that the cell transfection efficiency and cell viability could be improved by using traditional cell culture medium DMEM/F12 as an electroporation buffer, and simultaneously using the square-wave pulsing program of 200 V, 2 pulses, 20 ms length, and 20 μg DNA (3 μg/μL) in 4 mm cuvette, and the transfection efficiency and cell viability could eventually reach 78.0% and 40.9%, respectively. The purpose of this study is to provide a method reference and theoretical basis for the plasmid electrotransfection in mammal cells.

Efficient delivery of a large-size Cas9-EGFP vector in porcine fetal fibroblasts using a Lonza 4D-Nucleofector system

BACKGROUND

Porcine fetal fibroblasts (PFFs) are important donor cells for generating genetically modified pigs, but the transfection efficiencies of PFFs are often unsatisfactory especially when large-size vectors are to be delivered. In this study, we aimed to optimize the transfection conditions for delivery of a large-size vector in PFFs using Lonza 4D-Nucleofector™ vessels and strips.

METHODS

We firstly delivered a 13 kb Cas9-EGFP and a 3.5 kb pMAX-GFP vector into PFFs via 7 programs recommended by the Lonza basic protocol. We then tested 6 customized dual-electroporation programs for delivering the 13 kb plasmid into PFFs. In addition, we screened potential alternative electroporation buffers to the Nucleofector™ P3 solution. Finally, three CRISPR/Cas9-sgRNAs targeting Rosa26, H11, and Cep112 loci were delivered into PFFs with different single and dual-electroporation programs.

RESULTS

Notably lower transfection efficiencies were observed when delivering the 13 kb vector than delivering the 3.5 kb vector in PFFs via the single-electroporation programs. The customized dual-electroporation program FF-113 + CA-137 exhibited higher transfection efficiencies than any of the single-electroporation programs using vessels (98.1%) or strips (89.1%) with acceptable survival rates for the 13 kb vector. Entranster-E buffer generated similar transfection efficiencies and 24-hour survival rates to those from the P3 solution, thus can be used as an alternative electroporation buffer. In the genome-editing experiments, the FF-113 + CA-137 and CA-137 + CA-137 programs showed significantly superior (P < 0.01) efficiencies to ones from the single-electroporation programs in vessels and strips. Entranster-E buffer produced higher indel efficiencies than the P3 buffer.

CONCLUSIONS

We markedly increased the delivery efficiencies for a large vector via customized dual-electroporation programs using Lonza 4D-Nucleofector™ system, and Entranster-E buffer can be used as an alternative electroporation buffer to Nucleofector™ P3 buffer.

Surfactant Semiconductors as Trojan Horses in Cell-Membranes for On-Demand and Spatial Regulation of Oxidative Stress

Oxidative stress is a cause for numerous diseases and aging processes. Thus, researchers are keen to tune the level of intracellular stress and to learn from that. An unusual approach is presented here. The methodology involves multifunctional surfactants. Although their molecular design is nonbiological-a fullerenol head group attached covalently to pi-conjugated dyes-the surfactants possess superior biocompatibility. Using an intrinsic fluorescence signal as a probe, it is shown that the amphiphiles become incorporated into the Caco-2 cells. There, they are able to exhibit additional functions. The compound reduces cellular stress in dark reaction pathways. The antagonistic property is activated under irradiation, the photocatalytic production of reactive oxygen species (ROS), resulting in cell damage. The feature is activated even by near-infrared light (NIR-light) via a two-photon process. The properties as molecular semiconductors lead to a trojan horse situation and allows the programming of the spatial distribution of cytotoxicity.

Effect of Experimental Electrical and Biological Parameters on Gene Transfer by Electroporation: A Systematic Review and Meta-Analysis

The exact mechanisms of nucleic acid (NA) delivery with gene electrotransfer (GET) are still unknown, which represents a limitation for its broader use. Further, not knowing the effects that different experimental electrical and biological parameters have on GET additionally hinders GET optimization, resulting in the majority of research being performed using a trial-and-error approach. To explore the current state of knowledge, we conducted a systematic literature review of GET papers in in vitro conditions and performed meta-analyses of the reported GET efficiency. For now, there is no universal GET strategy that would be appropriate for all experimental aims. Apart from the availability of the required electroporation device and electrodes, the choice of an optimal GET approach depends on parameters such as the electroporation medium; type and origin of cells; and the size, concentration, promoter, and type of the NA to be transfected. Equally important are appropriate controls and the measurement or evaluation of the output pulses to allow a fair and unbiased evaluation of the experimental results. Since many experimental electrical and biological parameters can affect GET, it is important that all used parameters are adequately reported to enable the comparison of results, as well as potentially faster and more efficient experiment planning and optimization.

Molecular and Functional Characterization of BDNF-Overexpressing Human Retinal Pigment Epithelial Cells Established by Sleeping Beauty Transposon-Mediated Gene Transfer

More and more patients suffer from multifactorial neurodegenerative diseases, such as age-related macular degeneration (AMD). However, their pathological mechanisms are still poorly understood, which complicates the development of effective therapies. To improve treatment of multifactorial diseases, cell-based gene therapy can be used to increase the expression of therapeutic factors. To date, there is no approved therapy for dry AMD, including late-stage geographic atrophy. We present a treatment option for dry AMD that transfers the brain-derived neurotrophic factor (BDNF) gene into retinal pigment epithelial (RPE) cells by electroporation using the plasmid-based Sleeping Beauty (SB) transposon system. ARPE-19 cells and primary human RPE cells were co-transfected with two plasmids encoding the SB100X transposase and the transposon carrying a BDNF transcription cassette. We demonstrated efficient expression and secretion of BDNF in both RPE cell types, which were further increased in ARPE-19 cell cultures exposed to hydrogen peroxide. BDNF-transfected cells exhibited lower apoptosis rates and stimulated neurite outgrowth in human SH-SY5Y cells. This study is an important step in the development of a cell-based BDNF gene therapy that could be applied as an advanced therapy medicinal product to treat dry AMD or other degenerative retinal diseases.

Mouthwash as a non-invasive method of indocyanine green delivery for near-infrared fluorescence dental imaging

SIGNIFICANCE

X-ray imaging serves as the mainstream imaging in dentistry, but it involves risk of ionizing radiation.

AIM

This study presents the feasibility of indocyanine green-assisted near-infrared fluorescence (ICG-NIRF) dental imaging with 785-nm NIR laser in the first (ICG-NIRF-I: 700 to 1000 nm) and second (ICG-NIRF-II: 1000 to 1700 nm) NIR wavelengths.

APPROACH

Sprague Dawley rats with different postnatal days were used as animal models. ICG, as a fluorescence agent, was delivered to dental structures by subcutaneous injection (SC) and oral administration (OA).

RESULTS

For SC method, erupted and unerupted molars could be observed from ICG-NIRF images at a short imaging time (<1  min). ICG-NIRF-II could achieve a better image contrast in unerupted molars at 24 h after ICG injection. The OA could serve as a non-invasive method for ICG delivery; it could also cause the glow-in-dark effect in unerupted molars. For erupted molars, OA can be considered as mouthwash and exhibits outstanding performance for delivery of ICG dye; erupted molar structures could be observed at a short imaging time (<1  min) and low ICG dose (0.05  mg  /  kg).

CONCLUSIONS

Overall, ICG-NIRF with mouthwash could perform in-vivo dental imaging in two NIR wavelengths at a short time and low ICG dose.

Gene delivery in adherent and suspension cells using the combined physical methods

Physical methods are widely utilized to deliver nucleic acids into cells such as electro-transfection or heat shock. An efficient gene electro-transfection requires the best conditions including voltage, the pulse length or number, buffer, incubation time and DNA form. In this study, the delivery of pEGFP-N1 vector into two adherent cell lines (HEK-293 T and COS-7) with the same origin (epithelial cells), and also mouse bone marrow-derived dendritic cells (DCs) was evaluated using electroporation under different conditions alone and along with heat treatment. Our data showed that the highest green fluorescent protein (GFP) expression in HEK-293 T and COS-7 cells was observed in serum-free RPMI cell culture medium as electroporation buffer, voltage (200 V), the pulse number (2), the pulse length (15 ms), the circular form of DNA, and 48 h after electro-transfection. In addition, the highest GFP expression in DCs was detected in serum-free RPMI, voltage (300 V), the pulse number (1), the pulse length (5 ms), and 48 h after electro-transfection. The use of sucrose as electroporation buffer, the pulse number (2), and the pulse length (25 ms) led to further cytotoxicity and lower transfection in HEK293T and COS-7 cells than other conditions. Moreover, the high voltage (700 V) increased the cell cytotoxicity, and decreased electro-transfection efficiency in DCs. On the other hand, the best conditions of electroporation along with heat treatment could significantly augment the transfection efficiency in all the cells. These data will be useful for gene delivery in other cells with the same properties using physical methods.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10616-022-00524-4.

Ultralong-Time Recovery and Low-Voltage Electroporation for Biological Cell Monitoring Enabled by a Microsized Multipulse Framework

Long-term nondestructive monitoring of cells is of significant importance for understanding cell proliferation, cell signaling, cell death, and other processes. However, traditional monitoring methods are limited to a certain range of testing conditions and may reduce cell viability. Here, we present a microgap, multishot electroporation (M2E) system for monitoring cell recovery for up to ∼2 h using ∼5 V pulses and with excellent cell viability using a medium cell population. Electric field simulations reveal the bias-voltage- and gap-size-dependent electric field intensities in the M2E system. In addition to excellent transparency with low cell toxicity, the M2E system does not require specialized components, expensive materials, complicated fabrication processes, or cell manipulations; it just consists of a micrometer-sized pattern and a low-voltage square-wave generator. Ultimately, the M2E system can offer a long-term and nontoxic method of cell monitoring.

Transfection types, methods and strategies: a technical review

Transfection is a modern and powerful method used to insert foreign nucleic acids into eukaryotic cells. The ability to modify host cells’ genetic content enables the broad application of this process in studying normal cellular processes, disease molecular mechanism and gene therapeutic effect. In this review, we summarized and compared the findings from various reported literature on the characteristics, strengths, and limitations of various transfection methods, type of transfected nucleic acids, transfection controls and approaches to assess transfection efficiency. With the vast choices of approaches available, we hope that this review will help researchers, especially those new to the field, in their decision making over the transfection protocol or strategy appropriate for their experimental aims.

Gene transfer by electroporation with high frequency bipolar pulses in vitro

High-frequency bipolar pulses (HF-BP) have been demonstrated to be efficient for membrane permeabilization and irreversible electroporation. Since membrane permeabilization has been achieved using HF-BP pulses we hypothesized that with these pulses we can also achieve successful gene electrotransfer (GET). Three variations of bursts of 2 µs bipolar pulses with 2 µs interphase delay were applied in HF-BP protocols. We compared transfection efficiency of monopolar micro and millisecond pulses and HF-BP protocols at various plasmid DNA (pDNA) concentrations on CHO - K1 cells. GET efficiency increased with increasing pDNA concentration. Overall GET obtained by HF-BP pulse protocols was comparable to overall GET obtained by longer monopolar pulse protocols. Our results, however, suggest that although we were able to achieve similar percent of transfected cells, the number of pDNA copies that were successfully transferred into cells seemed to be higher when longer monopolar pulses were used. Interestingly, we did not observe any direct correlation between fluorescence intensity of pDNA aggregates formed on cell membrane and transfection efficiency. The results of our study confirmed that we can achieve successful GET with bipolar microsecond i. e. HF-BP pulses, although at the expense of higher pDNA concentrations.

Enhancing Cell Viability and Efficiency of Plasmid DNA Electrotransfer Through Reducing Plasma Membrane Permeabilization

Background

Pulsed electric field has been widely used to facilitate molecular cargo transfer into cells. However, the cell viability is often decreased when trying to increase the electrotransfer efficiency. We hypothesize that the decrease is due to electropermeabilization of cell membrane that disrupts homeostasis of intracellular microenvironment. Thus, a reduction in the membrane permeabilization may increase the cell viability.

Materials and Methods

Different compounds were supplemented into the pulsing buffer prior to electrotransfer for reduction of cell membrane damage. Extent of the damage was quantified by leakiness of the membrane to a fluorescent dye, calcein, preloaded into cells. At 24 hours post electrotransfer, cell viability and electrotransfer efficiency were quantified with flow cytometry.

Results

The cell viability could be substantially increased by supplementation of either type B gelatin or bovine serum albumin (BSA), without compromising the electrotransfer efficiency. The supplementation also decreased the amount of calcein leaking out of the cells, suggesting that the improvement in cell viability was due to the reduction in electrotransfer-induced membrane damage.

Conclusion

Data from the study demonstrate that type B gelatin and BSA can be used as inexpensive supplements for improving cell viability in electrotransfer.

Optimal imaging windows of indocyanine green-assisted near-infrared dental imaging with rat model and its comparison to X-ray imaging

In this study, we used rat animal model to compare the efficiency of indocyanine green (ICG)-assisted dental near-infrared fluorescence imaging with X-ray imaging, and we optimized the imaging window for both unerupted and erupted molars. The results show that the morphology of the dental structures was observed clearly from ICG-assisted dental images (especially through the endoscope). A better image contrast was easily acquired at the short imaging windows (<10 minutes) for unerupted and erupted molars. For unerupted molars, there is another optimized imaging window (48-96 hours) with a prominent glow-in-the-dark effect: only the molars remain bright. This study also revealed that the laser ablation of dental follicles can disrupt the molar development, and our method is able to efficiently detect laser-treated molars and acquire the precise morphology. Thus, ICG-assisted dental imaging has the potential to be a safer and more efficient imaging modality for the real-time diagnosis of dental diseases.

Systematic optimization of square-wave electroporation conditions for bovine primary fibroblasts

BACKGROUND

Gene transfer by electroporation is an established method for the non-viral mediated transfection of mammalian cells. Primary cells pose a particular challenge for electroporation-mediated gene transfer, since they are more vulnerable than immortalized cells, and have a limited proliferative capacity. Improving the gene transfer by using square wave electroporation in difficult to transfect cells, like bovine fetal fibroblasts, is a prerequisite for transgenic and further downstream experiments.

RESULTS

Here, bovine fetal fibroblasts were used for square-wave electroporation experiments in which the following parameters were systematically tested: electroporation buffer, electroporation temperature, pulse voltage, pulse duration, pulse number, cuvette type and plasmid DNA amount. For the experiments a commercially available square-wave generator was applied. Post electroporation, the bovine fetal fibroblasts were observed after 24 h for viability and reporter expression. The best results were obtained with a single 10 millisecond square-wave pulse of 400 V using 10 μg supercoiled plasmid DNA and 0.3 × 10⁶ cells in 100 μl of Opti-MEM medium in 4 mm cuvettes. Importantly, the electroporation at room temperature was considerably better than with pre-cooled conditions.

CONCLUSIONS

The optimized electroporation conditions will be relevant for gene transfer experiments in bovine fetal fibroblasts to obtain genetically engineered donor cells for somatic cell nuclear transfer and for reprogramming experiments in this species.

The effects of electroporation buffer composition on cell viability and electro-transfection efficiency

Electroporation is an electro-physical, non-viral approach to perform DNA, RNA, and protein transfections of cells. Upon application of an electric field, the cell membrane is compromised, allowing the delivery of exogenous materials into cells. Cell viability and electro-transfection efficiency (eTE) are dependent on various experimental factors, including pulse waveform, vector concentration, cell type/density, and electroporation buffer properties. In this work, the effects of buffer composition on cell viability and eTE were systematically explored for plasmid DNA encoding green fluorescent protein following electroporation of 3T3 fibroblasts. A HEPES-based buffer was used in conjunction with various salts and sugars to modulate conductivity and osmolality, respectively. Pulse applications were chosen to maintain constant applied electrical energy (J) or total charge flux (C/m2). The energy of the pulse application primarily dictated cell viability, with Mg2+-based buffers expanding the reversible electroporation range. The enhancement of viability with Mg2+-based buffers led to the hypothesis that this enhancement is due to ATPase activation via re-establishing ionic homeostasis. We show preliminary evidence for this mechanism by demonstrating that the enhanced viability is eliminated by introducing lidocaine, an ATPase inhibitor. However, Mg2+ also hinders eTE compared to K+-based buffers. Collectively, the results demonstrate that the rational selection of pulsing conditions and buffer compositions are critical for the design of electroporation protocols to maximize viability and eTE.

Functionalization of gold-nanoparticles by the Clostridium perfringens enterotoxin C-terminus for tumor cell ablation using the gold nanoparticle-mediated laser perforation technique

A recombinant produced C-terminus of the C. perfringens enterotoxin (C-CPE) was conjugated to gold nanoparticles (AuNPs) to produce a C-CPE-AuNP complex (C-CPE-AuNP). By binding to claudins, the C- CPE should allow to target the AuNPs onto the claudin expressing tumor cells for a subsequent cell killing by application of the gold nanoparticle-mediated laser perforation (GNOME-LP) technique. Using qPCR and immunocytochemistry, we identified the human Caco-2, MCF-7 and OE-33 as well as the canine TiHoDMglCarc1305 as tumor cells expressing claudin-3, -4 and -7. Transepithelial electrical resistance (TEER) measurements of Caco-2 cell monolayer showed that the recombinant C-CPE bound to the claudins. GNOME-LP at a laser fluence of 60 mJ/cm² and a scanning speed of 0.5 cm/s specifically eliminated more than 75% of claudin expressing human and canine cells treated with C-CPE-AuNP. The same laser fluence did not affect the cells when non-functionalized AuNPs were used. Furthermore, most of the claudin non-expressing cells treated with C-CPE-AuNP were not killed by GNOME-LP. Additionally, application of C-CPE-AuNP to spheroids formed by MCF-7 and OE-33 cells grown in Matrigel reduced spheroid area. The results demonstrate that specific ablation of claudin expressing tumor cells is efficiently increased by activated C-CPE functionalized AuNPs using optical methods.

Delivery methods to increase cellular uptake and immunogenicity of DNA vaccines

DNA vaccines are ideal candidates for global vaccination purposes because they are inexpensive and easy to manufacture on a large scale such that even people living in low-income countries can benefit from vaccination. However, the potential of DNA vaccines has not been realized owing mainly to the poor cellular uptake of DNA in vivo resulting in the poor immunogenicity of DNA vaccines. In this review, we discuss the benefits and shortcomings of several promising and innovative non-biological methods of DNA delivery that can be used to increase cellular delivery and efficacy of DNA vaccines.

Biophysical effects in off-resonant gold nanoparticle mediated (GNOME) laser transfection of cell lines, primary- and stem cells using fs laser pulses

Gold nanoparticle mediated (GNOME) laser transfection is a powerful technique to deliver small biologically relevant molecules into cells. However, the transfection of larger and especially negatively charged DNA remains challenging. The efficiency for pDNA was 0.57% using parameter that does not influence the endo- and exogenous DNA. In order to gain a deeper understanding of the actual molecule uptake process, the uptake efficiency was determined using molecules of different sizes. It was evaluated that uncharged dextran molecules (2000 kDa) were delivered with an efficiency of 68%. The intracellular distribution of injected molecules was visualized and larger molecules were primary found in the cytoplasm. Patch clamp measurements suggested a permeabilization time up to 15 minutes. The uptake efficiency depended on the size and charge of the molecule to deliver as well as the cell size. A minor role for transfection plays the cell type since primary stem cells were successfully transfected. The perforation efficiency of semi-adherent and suspension cells is influenced by the cell and molecule size.

Physical energy for drug delivery; poration, concentration and activation

Techniques for controlling the rate and duration of drug delivery, while targeting specific locations of the body for treatment, to deliver the cargo (drugs or DNA) to particular parts of the body by what are becoming called "smart drug carriers" have gained increased attention during recent years. Using such smart carriers, researchers have also been investigating a number of physical energy forces including: magnetic fields, ultrasound, electric fields, temperature gradients, photoactivation or photorelease mechanisms, and mechanical forces to enhance drug delivery within the targeted cells or tissues and also to activate the drugs using a similar or a different type of external trigger. This review aims to cover a number of such physical energy modalities. Various advanced techniques such as magnetoporation, electroporation, iontophoresis, sonoporation/mechnoporation, phonophoresis, optoporation and thermoporation will be covered in the review. Special emphasis will be placed on photodynamic therapy owing to the experience of the authors' laboratory in this area, but other types of drug cargo and DNA vectors will also be covered. Photothermal therapy and theranostics will also be discussed.

Studies on neutral, cationic and biotinylated cationic microbubbles in enhancing ultrasound-mediated gene delivery in vitro and in vivo

Ultrasound-mediated gene transfer is emerging as a practical means of facilitating targeted gene expression and is significantly enhanced in the presence of exogenously added microbubbles. This study explores the influence of microbubble surface modifications on their interaction with plasmid DNA and target cells, and the functional consequences of those interactions in terms of ultrasound-mediated gene transfer. Polyethylene glycol-stabilized, lipid-shelled microbubbles with neutral (SDM201), cationic (SDM202) and biotinylated cationic (SDM302) surfaces were compared in terms of their abilities to interact with a luciferase-encoding reporter plasmid DNA and with target cells in vitro. The results demonstrate that the biotinylated cationic microbubble>cationic microbubble>neutral microbubble, in terms of their abilities to interact with target cells and to enhance ultrasound-mediated gene transfer, particularly at low microbubble concentration. The presence of a net positive charge on both cationic microbubbles promoted the formation of microbubble-nucleic acid complexes, although preformation of the complexes prior to addition to target cells inhibited the interaction between the microbubbles and target cells in vitro. The impact of these findings on potential in vitro or ex vivo therapeutic applications of microbubble-enhanced ultrasound-mediated gene transfer is discussed. All three microbubble preparations could be used to facilitate gene transfer in vivo and the potential advantages associated with the use of the cationic microbubbles for targeted gene delivery are discussed.

Genetic modification of mesenchymal stem cells

Mesenchymal stem cells (MSC) are currently considered the most promising type of adult stem cells for therapeutic applications, because they can be easily isolated from the bone marrow and other tissues, and manipulated for different applications. The genetic transformation of MSC using genes that enhance their homing ability, as well as their proliferation and survival capacities when transplanted to sites of injury, is an important alternative to improve MSC function, especially for tissue regeneration. This chapter describes protocols for the transformation of MSC using plasmid vectors by lipofection and electroporation, as well as retroviral vectors representing viral transformations.

Genetically manipulated adult stem cells for wound healing

New knowledge of the signal controls and activities of adult stem cells (ASCs) involved in wound repair have led to extensive investigation of the topical delivery of biomacromolecules and multipotent stem cells to injured tissues for scar-less regeneration. The transplantation of genetically recombinant stem cells, which have roles as both therapeutics and carriers for gene delivery to wound sites, represents an attractive strategy for wound treatment. Here, we compare viral and non-viral vectors and three-dimensional scaffold-based transfection strategies in terms of their biosafety, recombinant efficiency and influence on the differentiation of ASCs, to indicate the future direction of the application of recombinant ASCs in wound treatment.

Electroporation to deliver plasmid DNA into rat dental tissues

BACKGROUND

Delivery of DNA into the target tissues is an important technique in gene function studies and gene therapy. Surgical treatment of tooth eruption disorders, such as impacted third molars, is a major healthcare cost. Because the dental follicle (DF) is essential for regulating tooth eruption, establishment of local gene transfer protocols is needed to determine the effect of various genes on eruption and to develop gene therapy approaches for inducing the eruption of impacted molars.

METHODS

Plasmids containing lacZ reporter gene were injected into rat mandibles and then electroporated at the designated settings. Mandibles were collected 24 h after electroporation for X-gal staining to evaluate the transfection efficiency. Tissues were collected at various days post-electroporation to determine the expression of the transgene.

RESULTS

For the DF, depth of injection and pulse number appear to be important. Six pulses can achieve above 80% transfection of the DF at 50 V or 120 V. For alveolar bone (AB) transfection, voltages are important, with 120 V being optimal. Regarding pulse durations, we determined that durations of 20 and 30 ms achieve the maximum transfection in AB and DF, respectively.

CONCLUSIONS

The present study demonstrates for the first time the feasibility of electroporation to locally deliver plasmids into dental tissues. Parameters affecting electroporation to deliver plasmids into the dental tissues were optimized. This protocol could be used to deliver short hairpin RNA or genes of interest into the dental tissues to regulate tooth eruption. Thus, it may be possible to develop nonsurgical treatments for inducing the eruption of impacted teeth.