Formate and Nitrate Utilization in Enterobacter aerogenes for Semi-Anaerobic Production of Isobutanol

Microbial host engineering for sustainable isobutanol production from renewable resources

Due to the limited resources and environmental problems associated with fossil fuels, there is a growing interest in utilizing renewable resources for the production of biofuels through microbial fermentation. Isobutanol is a promising biofuel that could potentially replace gasoline. However, its production efficiency is currently limited by the use of naturally isolated microorganisms. These naturally isolated microorganisms often encounter problems such as a limited range of substrates, low tolerance to solvents or inhibitors, feedback inhibition, and an imbalanced redox state. This makes it difficult to improve their production efficiency through traditional process optimization methods. Fortunately, recent advancements in genetic engineering technologies have made it possible to enhance microbial hosts for the increased production of isobutanol from renewable resources. This review provides a summary of the strategies and synthetic biology approaches that have been employed in the past few years to improve naturally isolated or non-natural microbial hosts for the enhanced production of isobutanol by utilizing different renewable resources. Furthermore, it also discusses the challenges that are faced by engineered microbial hosts and presents future perspectives to enhancing isobutanol production. KEY POINTS: • Promising potential of isobutanol to replace gasoline • Engineering of native and non-native microbial host for isobutanol production • Challenges and opportunities for enhanced isobutanol production.

Polystyrene microplastics biodegradation by gut bacterial Enterobacter hormaechei from mealworms under anaerobic conditions: Anaerobic oxidation and depolymerization

Synthetic plastic is used throughout daily life and industry, threatening organisms with microplastic pollution. Polystyrene is a major plastic polymer and also widely found sources of plastic wastes and microplastics. Here, we report that Enterobacter hormaechei LG3 (CP118279.1), a facultative anaerobic bacterial strain isolated from the gut of Tenebrio molitor larvae (mealworms) can oxidize and depolymerize polystyrene under anaerobic conditions. LG3 performed biodegradation while forming a biofilm on the plastic surface. PS biodegradation was characterized by analyses of surface oxidation, change in morphology and molecular weights, and production of biodegraded derivative. The biodegradation performance by LG3 was compared with PS biodegradation by Bacillus amyloliquefaciens SCGB1 under both anaerobic and aerobic conditions. In addition, through nanopore sequencing technology, we identified degradative enzymes, including thiol peroxidase (tpx), alkyl hydroperoxide reductase C (ahpC) and bacterioferritin comigratory protein (bcp). Along with the upregulation of degradative enzymes for biodegradation, changes in lipid A and biofilm-associated proteins were also observed after the cells were incubated with polystyrene microplastics. Our results provide evidence for anaerobic biodegradation by polystyrene-degrading bacteria and show alterations in gene expression patterns after polystyrene microplastics treatment in the opportunistic pathogen Enterobacter hormaechei.

Effects of tolC on tolerance to bile salts and biofilm formation in Cronobacter malonaticus

Bile salts is one of essential components of bile secreted into the intestine to confer antibacterial protection. Cronobacter species are associated with necrotizing enterocolitis in newborns and show a strong tolerance to bile salts. However, little attempt has been made to focus on the molecular basis of the tolerance to bile salts. In this study, we investigated the roles of tolC on growth, cell morphology, motility, and biofilm formation ability in Cronobacter malonaticus under bile salt stress. The results indicated that the absence of tolC significantly affected the colony morphology and outer membrane structure in a normal situation, compared with those of the wild type strain. The deletion of tolC caused the decline in resistance to bile salt stress, inhibition of growth, and observable reduction in relative growth rate and motility. Moreover, the bacterial stress response promoted the biofilm formation ability of the mutant strain. The expression of the AcrAB-TolC system (acrA, acrB, and tolC) was effectively upregulated compared with the control sample when exposed to different bile salt concentrations. The findings provide valuable information for deeply understanding molecular mechanisms about the roles of tolC under bile salt stress and the prevention and control of C. malonaticus.

Improved production of 2,3-butanediol and isobutanol by engineering electron transport chain in Escherichia coli

The electron transport chain (ETC) is one of the major energy generation pathways in microorganisms under aerobic condition. Higher yield of ATP can be achieved through oxidative phosphorylation with consumption of NADH than with substrate level phosphorylation. However, most value-added metabolites are in an electrochemically reduced state, which requires reducing equivalent NADH as a cofactor. Therefore, optimal production of value-added metabolites should be balanced with ETC in terms of energy production. In this study, we attempted to reduce the activity of ETC to secure availability of NADH. The ETC mutants exhibited poor growth rate and production of fermentative metabolites compared to parental strain. Introduction of heterologous pathways for synthesis of 2,3-butanediol and isobutanol to ETC mutants resulted in increased titres and yields of the metabolites. ETC mutants yielded higher NADH/NAD+ ratio but similar ATP content than that by the parental strain. Furthermore, ETC mutants operated fermentative metabolism pathways independent of oxygen supply in large-scale fermenter, resulting in increased yield and titre of 2,3-butanediol. Thus, engineering of ETC is a useful metabolic engineering approach for production of reduced metabolites.

Biorefinery: The Production of Isobutanol from Biomass Feedstocks

Environmental issues have prompted the vigorous development of biorefineries that use agricultural waste and other biomass feedstock as raw materials. However, most current biorefinery products are cellulosic ethanol. There is an urgent need for biorefineries to expand into new bioproducts. Isobutanol is an important bulk chemical with properties that are close to gasoline, making it a very promising biofuel. The use of microorganisms to produce isobutanol has been extensively studied, but there is still a considerable gap to achieving the industrial production of isobutanol from biomass. This review summarizes current metabolic engineering strategies that have been applied to biomass isobutanol production and recent advances in the production of isobutanol from different biomass feedstocks.

Expression, Characterization and Structure Analysis of a New GH26 Endo-β-1, 4-Mannanase (Man26E) from Enterobacter aerogenes B19

β-mannanase is one of the key enzymes to hydrolyze hemicellulose. At present, most β-mannanases are not widely applied because of their low enzyme activity and unsuitable enzymatic properties. In this work, a new β-mannanase from Enterobacter aerogenes was studied, which laid the foundation for its further application. Additionally, we will further perform directed evolution of the enzyme to increase its activity, improve its temperature and pH properties to allow it more applications in industry. A new β-mannanase (Man26E) from Enterobacter aerogenes was successfully expressed in Escherichia coli. Man26E showed about 40 kDa on SDS-PAGE gel. The SWISS-MODEL program was used to model the tertiary structure of Man26E, which presented a core (α/β)8-barrel catalytic module. Based on the binding pattern of CjMan26 C, Man26E docking Gal1Man4 was investigated. The catalytic region consisted of a surface containing four solvent-exposed aromatic rings, many hydrophilic and charged residues. Man26E displayed the highest activity at pH 6.0 and 55 °C, and high acid and alkali stability in a wide pH range (pH 4–10) and thermostability from 40 to 50 °C. The enzyme showed the highest activity on locust bean gum, and the Km and Vmax were 7.16 mg mL−1 and 508 U mg−1, respectively. This is the second β-mannanase reported from Enterobacter aerogenes B19. The β-mannanase displayed high enzyme activity, a relatively high catalytic temperature and a broad range of catalytic pH values. The enzyme catalyzed both polysaccharides and manno-oligosaccharides.

Regulation of intracellular ATP supply and its application in industrial biotechnology

Efficient cell factories are the core of industrial biotechnology. In recent years, synthetic biology develops rapidly, and more and more modified microbial cell factories are employed in industrial biotechnology. ATP plays vital roles in biosynthesis, metabolism regulation, and cellular maintenance. Regulating cellular ATP supply can effectively modify cellular metabolism. This paper presents a review of recent studies on the regulation of the intracellular ATP supply and its application in industrial biotechnology. Detailed strategies for regulating the ATP supply and the resulting impact on bioproduction are introduced. It is observed that regulating the cellular ATP supply can provide great possibilities for making microbial cells into efficient factories. Future perspectives for further understanding the function of ATP are also discussed.

Improved production of isobutanol in pervaporation-coupled bioreactor using sugarcane bagasse hydrolysate in engineered Enterobacter aerogenes

A process of isobutanol production from sugarcane bagasse hydrolysates in Enterobacter aerogenes was developed here with a pervaporation-integrated procedure. Isobutanol pathway was overexpressed in a mutant strain with eliminated byproduct-forming enzymes (LdhA, BudA, and PflB). A glucose-and-xylose-coconsuming ptsG mutant was constructed for effective utilization of lignocellulosic biomass. Toxic effects of isobutanol were alleviated by in situ recovery via a pervaporation procedure. Compared to single-batch fermentation, cell growth and isobutanol titer were improved by 60% and 100%, respectively, in the pervaporation-integrated fermentation process. A lab-made cross-linked polydimethylsiloxane membrane was cast on polyvinylidene fluoride and used in the pervaporation process. The membrane-penetrating condensate contained 55-226 g m^-2 h^-1 isobutanol with 6-25 g L^-1 ethanol after separation. This study offers improved fermentative production of isobutanol from lignocellulosic biomass with a pervaporation procedure.

The Glutaredoxin Gene, grxB, Affects Acid Tolerance, Surface Hydrophobicity, Auto-Aggregation, and Biofilm Formation in Cronobacter sakazakii

Cronobacter species are foodborne pathogens that can cause neonatal meningitis, necrotizing enterocolitis, and sepsis; they have unusual abilities to survive in environmental stresses such as acid stress. However, the factors involved in acid stress responses and biofilm formation in Cronobacter species are poorly understood. In this study, we investigated the role of grxB on cellular morphology, acid tolerance, surface hydrophobicity, auto-aggregation (AAg), motility, and biofilm formation in Cronobacter sakazakii. The deletion of grxB decreased resistance to acid stresses, and notably led to weaker surface hydrophobicity, AAg, and biofilm formation under normal and acid stress conditions, compared with those of the wild type strain; however, motility was unaffected. Therefore, grxB appears to contribute to the survival of C. sakazakii in acid stresses and biofilm formation. This is the first report to provide valuable evidence for the role of grxB in acid stress responses and biofilm formation in C. sakazakii.