Identification of stable helical bundles from a combinatorial library of amphipathic peptides

A Highly Selective Biosensor Based on Peptide Directly Derived from the HarmOBP7 Aldehyde Binding Site

This paper presents the results of research on determining the optimal length of a peptide chain to effectively bind octanal molecules. Peptides that map the aldehyde binding site in HarmOBP7 were immobilized on piezoelectric transducers. Based on computational studies, four Odorant Binding Protein-derived Peptides (OBPPs) with different sequences were selected. Molecular modelling results of ligand docking with selected peptides were correlated with experimental results. The use of low-molecular synthetic peptides, instead of the whole protein, enabled the construction OBPPs-based biosensors. This work aims at developing a biomimetic piezoelectric OBPPs sensor for selective detection of octanal. Moreover, the research is concerned with the ligand binding affinity depending on different peptides’ chain lengths. The authors believe that the chain length can have a substantial influence on the type and effectiveness of peptide–ligand interaction. A confirmation of in silico investigation results is the correlation with the experimental results, which shows that the highest affinity to octanal is exhibited by the longest peptide (OBPP4 – KLLFDSLTDLKKKMSEC-NH₂). We hypothesized that the binding of long chain aldehydes to the peptide, mimicking the binding site of HarmOBP7, induced a conformational change in the peptide deposited on a selected transducer. The constructed OBPP4-based biosensors were able to selectively bind octanal in the gas phase. It was also shown that the sensors were characterized by high selectivity with respect to octanal, as well as to acetaldehyde and benzaldehyde. The results indicate that the OBPP4 peptide, mimicking the binding domain in the Odorant Binding Protein, can provide new opportunities for the development of biomimicking materials in the field of odor biosensors.

Role of positions e and g in the fibrous assembly formation of an amphipathic α-helix-forming polypeptide

We previously characterized α3, a polypeptide that has a three times repeated sequence of seven amino acids (abcdefg: LETLAKA) and forms fibrous assemblies composed of amphipathic α-helices. Upon comparison of the amino acid sequences of α3 with other α-helix forming polypeptides, we proposed that the fibrous assemblies were formed due to the alanine (Ala) residues at positions e and g. Here, we characterized seven α3 analog polypeptides with serine (Ser), glycine (Gly), or charged residues substituted for Ala at positions e and g. The α-helix forming abilities of the substituted polypeptides were less than that of α3. The polypeptides with amino acid substitutions at position g and the polypeptide KEα3, in which Ala was substituted with charged amino acids, formed few fibrous assemblies. In contrast, polypeptides with Ala replaced by Ser at position e formed β-sheets under several conditions. These results show that Ala residues at position e and particularly at position g are involved in the formation of fibrous assemblies.

pH responsiveness of fibrous assemblies of repeat-sequence amphipathic α-helix polypeptides

We reported previously that our designed polypeptide α3 (21 residues), which has three repeats of a seven-amino-acid sequence (LETLAKA)3, forms not only an amphipathic α-helix structure but also long fibrous assemblies in aqueous solution. To address the relationship between the electrical states of the polypeptide and its α-helix and fibrous assembly formation, we characterized mutated polypeptides in which charged amino acid residues of α3 were replaced with Ser. We prepared the following polypeptides: 2Sα3 (LSTLAKA)3, in which all Glu residues were replaced with Ser residues; 6Sα3 (LETLASA)3, in which all Lys residues were replaced with Ser; and 2S6Sα3 (LSTLASA)3; in which all Glu and Lys residues were replaced with Ser. In 0.1M KCl, 2Sα3 formed an α-helix under basic conditions and 6Sα3 formed an α-helix under acid conditions. In 1M KCl, they both formed α-helices under a wide pH range. In addition, 2Sα3 and 6Sα3 formed fibrous assemblies under the same buffer conditions in which they formed α-helices. α-Helix and fibrous assembly formation by these polypeptides was reversible in a pH-dependent manner. In contrast, 2S6Sα3 formed an α-helix under basic conditions in 1M KCl. Taken together, these findings reveal that the charge states of the charged amino acid residues and the charge state of the Leu residue located at the terminus play an important role in α-helix formation.

Structure of a simplified β-hairpin and its ATP complex

The capacity of three designed duodecamer peptides with the low diversity sequence: H1ϕ2I3K4I5D6G7K8ϕ9I10K11H12 where ϕ is His, Phe or Trp, to adopt a β-hairpin conformation was studied using NMR spectroscopy. Whereas KIAβH, the variant with His at positions two and nine, is disordered, KIAβF, the peptide with Phe at these positions, adopts a small population of β-hairpin. A high population of β-hairpin structure was detected for KIAβW, the variant with Trp. Utilizing NMR data, the structure of KIAβW was solved and it reveals a β-hairpin stabilized by hydrophobic interactions between Ile residues on one face and Trp-Trp and cation-π interactions on the opposite face. Upon adding ATP, these peptides show chemical shift changes indicative of ATP binding. The binding of ATP to KIAβW shows a KD ≈ 20 μM at pH 5, 5 °C and has a 1:1 stoichiometry. The KIAβW-ATP complex was determined using NMR spectroscopy and reveals the adenine ring sandwiched between the two Trp indole rings and that ATP binding induces important conformational changes in His1, Trp2, Lys4, Trp9 and Lys11 in the β-hairpin. The implications of these results for the hypothetic presence of β-hairpins and amyloids alongside RNAs on the prebiotic Earth are discussed.

Effects of chain length of an amphipathic polypeptide carrying the repeated amino acid sequence (LETLAKA)(n) on α-helix and fibrous assembly formation

Polypeptide α3 (21 residues), with three repeats of a seven-amino-acid sequence (LETLAKA)(3), forms an amphipathic α-helix and a long fibrous assembly. Here, we investigated the ability of α3-series polypeptides (with 14-42 residues) of various chain lengths to form α-helices and fibrous assemblies. Polypeptide α2 (14 residues), with two same-sequence repeats, did not form an α-helix, but polypeptide α2L (15 residues; α2 with one additional leucine residue on its carboxyl terminal) did form an α-helix and fibrous assembly. Fibrous assembly formation was associated with polypeptides at least as long as polypeptide α2L and with five leucine residues, indicating that the C-terminal leucine has a critical element for stabilization of α-helix and fibril formation. In contrast, polypeptides α5 (35 residues) and α6 (42 residues) aggregated easily, although they formed α-helices. A 15-35-residue chain was required for fibrous assembly formation. Electron microscopy and X-ray fiber diffraction showed that the thinnest fibrous assemblies of polypeptides were about 20 Å and had periodicities coincident with the length of the α-helix in a longitudinal direction. These results indicated that the α-helix structures were orientated along the fibrous axis and assembled into a bundle. Furthermore, the width and length of fibrous assemblies changed with changes in the pH value, resulting in variations in the charged states of the residues. Our results suggest that the formation of fibrous assemblies of amphipathic α-helices is due to the assembly of bundles via the hydrophobic faces of the helices and extension with hydrophobic noncovalent bonds containing a leucine.

Putative one-pot prebiotic polypeptides with ribonucleolytic activity

KIA7, a peptide with a highly restricted set of amino acids (Lys, Ile, Ala, Gly and Tyr), adopts a specifically folded structure. Some amino acids, including Lys, Ile, Ala, Gly and His, form under the same putative prebiotic conditions, whereas different conditions are needed for producing Tyr, Phe and Trp. Herein, we report the 3D structure and conformational stability of the peptide KIA7H, which is composed of only Lys, Ile, Ala, Gly and His. When the imidazole group is neutral, this 20-mer peptide adopts a four-helix bundle with a specifically packed hydrophobic core. Therefore, one-pot prebiotic proteins with well-defined structures might have arisen early in chemical evolution. The Trp variant, KIA7W, was also studied. It adopts a 3D structure similar to that of KIA7H and its previously studied Tyr and Phe variants, but is remarkably more stable. When tested for ribonucleolytic activity, KIA7H, KIA7W and even short, unstructured peptides rich in His and Lys, in combination with Mg(++), Mn(++) or Ni(++) (but not Cu(++), Zn(++) or EDTA) specifically cleave the single-stranded region in an RNA stem-loop. This suggests that prebiotic peptide-divalent cation complexes with ribonucleolytic activity might have co-inhabited the RNA world.

Getting specificity from simplicity in putative proteins from the prebiotic earth

Can unique protein structures arise from a limited set of amino acids present on the prebiotic earth? To address this question, we have determined the stability and structure of KIA7, a 20-residue polypeptide containing chiefly Lys, Ile, and Ala. NMR methods reveal that KIA7 tetramerizes and folds on the millisecond time scale to adopt a four-helix X-bundle structure with a tightly and specifically packed core. Denaturation studies and hydrogen exchange measurements of KIA7 and several variants demonstrate that ridges-into-grooves packing of Ala and Ile side chains and the packing of a C-terminal aromatic group into the hydrophobic core are sufficient to give rise to a rather stable, well folded protein structure, with no favorable electrostatic interactions or tertiary or quaternary hydrogen bonds. Both modern proteins and RNAs can adopt specific structures, but RNAs do so with a limited "alphabet" of residues and types of stabilizing interactions. The results reported here show that specific, well folded protein structures can also arise from a highly reduced set of stabilizing interactions and amino acids that are thought to have been present on the prebiotic earth.

Reversible assembly of helical filaments by de novo designed minimalist peptides

We have designed a series of 15 short, helical de novo peptides consisting of lysine, isoleucine, and alanine. We have termed this the KIA series. These peptides differ only in their hydrophobic interface, and thus their self-association is largely a consequence of hydrophobic interactions. One of these peptides, KIA13, forms insoluble helical fibers at specific NaCl concentrations. We have used CD spectroscopy, turbidity assays, and in situ tapping mode atomic force microscopy to characterize the reversible assembly pathway for this peptide. It is unfolded at low NaCl concentration, and forms helical, soluble fibers resembling a coiled-coil conformation at intermediate NaCl concentrations, and rope-like insoluble fibers at high NaCl concentrations. Reducing the NaCl concentration completely reverses this process. Another peptide from the KIA series specifically inhibits the formation of the insoluble KIA13 fibers, and reverses the process to some extent. This work sheds light onto protein fibrillogenesis and offers intriguing possibilities for the use of these types of peptides in drug delivery and biomaterials applications.

Tuning Stability of Coiled-Coil Heterotrimers by Selection of Steric Matching Partners

Coiled-coil trimers of differing stability have been designed by judicious choice of hydrophobic core side chain identity. Steric matching of two alanines with one large side chain at three core positions affords stable heterotrimers. Use of either cyclohexylalanine (Cha) or phenylalanine (Phe) as the large side chain is effective, and unfolding free energies can be varied by over 3 kcal/mol by mixing Cha- and Phe-containing subunits.