Biosilicification of dual-fusion enzyme immobilized on magnetic nanoparticle

Entrapment of the Fastest Known Carbonic Anhydrase with Biomimetic Silica and Its Application for CO2 Sequestration

Capturing and storing CO₂ is of prime importance. The rate of CO₂ sequestration is often limited by the hydration of CO₂, which can be greatly accelerated by using carbonic anhydrase (CA, EC 4.2.1.1) as a catalyst. In order to improve the stability and reusability of CA, a silica-condensing peptide (R5) was fused with the fastest known CA from Sulfurihydrogenibium azorense (SazCA) to form R5-SazCA; the fusion protein successfully performed in vitro silicification. The entrapment efficiency reached 100% and the silicified form (R5-SazCA-SP) showed a high activity recovery of 91%. The residual activity of R5-SazCA-SP was two-fold higher than that of the free form when stored at 25 °C for 35 days; R5-SazCA-SP still retained 86% of its activity after 10 cycles of reuse. Comparing with an uncatalyzed reaction, the time required for the onset of CaCO₃ formation was shortened by 43% and 33% with the addition of R5-SazCA and R5-SazCA-SP, respectively. R5-SazCA-SP shows great potential as a robust and efficient biocatalyst for CO₂ sequestration because of its high activity, high stability, and reusability.

CLytA-DAAO Chimeric Enzyme Bound to Magnetic Nanoparticles. A New Therapeutical Approach for Cancer Patients?

D-amino acid oxidase (DAAO) is an enzyme that catalyzes the oxidation of D-amino acids generating H2O2. The enzymatic chimera formed by DAAO bound to the choline-binding domain of N-acetylmuramoyl-L-alanine amidase (CLytA) induces cytotoxicity in several pancreatic and colorectal carcinoma and glioblastoma cell models. In the current work, we determined whether the effect of CLytA-DAAO immobilized in magnetic nanoparticles, gold nanoparticles, and alginate capsules offered some advantages as compared to the free CLytA-DAAO. Results indicate that the immobilization of CLytA-DAAO in magnetic nanoparticles increases the stability of the enzyme, extending its time of action. Besides, we compared the effect induced by CLytA-DAAO with the direct addition of hydrogen peroxide, demonstrating that the progressive generation of reactive oxygen species by CLytA-DAAO is more effective in inducing cytotoxicity than the direct addition of H2O2. Furthermore, a pilot study has been initiated in biopsies obtained from pancreatic and colorectal carcinoma and glioblastoma patients to evaluate the expression of the main genes involved in resistance to CLytA-DAAO cytotoxicity. Based on our findings, we propose that CLytA-DAAO immobilized in magnetic nanoparticles could be effective in a high percentage of patients and, therefore, be used as an anti-cancer therapy for pancreatic and colorectal carcinoma and glioblastoma.

Programmable stimuli-responsive polypeptides for biomimetic synthesis of silica nanocomposites and enzyme self-immobilization

Bioinspired silicification is an attractive route for achieving unique silica nanocomposites. Herein, a novel, facile and inexpensive route for biosilica synthesis is developed using the stimuli-responsive elastin-like polypeptide (ELP). The ELP is precisely tailored to a silica-mineralizing peptide by programming it with lysine residues. The resulting cationic ELP[KV₈F-40] is purified in ultrahigh yield using a chromatography-free ITC purification technique based on thermal-responsive property. Excitingly, the specific activity of ELP is 40-fold higher than that of silaffin. Besides, efficient and strong entrapment of ELP is achieved with over 98% of immobilization yield and less than 2% of leakage. These imply that cationic ELP may be used as a bifunctional tag (purification and immobilization) for fusion protein. An enzyme (xylanase) is therefore chosen to genetically fuse to ELP. The ELP-fused xylanase is purified by ELP with high purity (~98%) and enables the rapid (within minutes) self-immobilization. The immobilization yield was greater than 95%, and the immobilized xylanases hardly leaked from the silica matrix, demonstrating high efficiency of the self-immobilization process. The strategy developed here may provide a new opportunity for fabricating functional silica nanocomposites in a feasible and inexpensive pathway, which will have great potentials in the field of biotechnology.

Novel Application of Magnetic Protein: Convenient One-Step Purification and Immobilization of Proteins

Recently, a magnetic protein was discovered, and a multimeric magnetosensing complex was validated, which may form the basis of magnetoreception. In this study, the magnetic protein was firstly used in biotechnology application, and a novel convenient one-step purification and immobilization method was established. A universal vector and three linker patterns were developed for fusion expression of magnetic protein and target protein. The magnetic protein was absorbed by iron beads, followed by target protein aggregation, purification, and immobilization. GFP, employed as a reporter protein, was successfully purified from cell lysate. Subsequently, three enzymes (lipase, α-L-arabinofuranosidase, pullulanase) with different molecular sizes testified the versatility of this magnetic-based approach. The specific activities of the purified enzymes were distinctly higher than those of the traditionally purified enzymes using affinity chromatography. The lipase immobilized on iron beads presented improved thermostability and enhanced pH tolerance compared to the free enzyme. The immobilized lipase could be easily recovered and reused for maximum utilization. After 20 cycles of reutilization, the magnetically immobilized lipase retained 71% of its initial activity. This investigation may help introduce magnetic protein into biotechnology applications, and the one-step purification and immobilization method may serve to illustrate an economically viable process for industry.

Non-chromatographic bioprocess engineering of a recombinant mineralizing protein for the synthesis of silica nanocapsules

Inspired by nature, synthetic mineralizing proteins have been developed to synthesize various structures of silica-based nanomaterials under environmentally friendly conditions. However, the development of bioprocesses able to assist in the translation of these new materials has lagged the development of the materials themselves. The development of cost-effective and scalable bioprocesses which minimize reliance on chromatography to recover biomolecules from microbial cell factories remains a significant challenge. This paper reports a simplified purification process for a recently reported recombinant catalytic modular (D4S2) protein (M(DPSMKQLADS-LHQLARQ-VSRLEHA)₄ EPSRKKRKKRKKRKKGGGY; M 13.3 kDa; pI 10.9), which combines a variant of the established designer biosurfactant protein DAMP4 with a new biomimetic sequence (RKKRKKRKKRKKGGGY), providing for a bi-modular functionality (emulsification and biosilicification). The four-helix bundle structure of the protein has been demonstrated to remain stable and soluble under high temperature and high salt conditions, which confers simplified bioprocessing character. However, the high positive charge on the biosilification sequence necessitates removal of DNA contaminants from crude cell-extract at an early stage in the process by adding poly(ethyleneimine) (PEI). In this process, cellular protein contaminants were selectively precipitated by adding Na₂ SO₄ to the protein mixture up to a high concentration (1 M) and mixed at high temperature (90°C, 5 min) where D4S2 remained stable and soluble due to its four-helix bundle structure. Further increase of the Na₂ SO₄ concentration to 1.8 M precipitated, thus separated, D4S2 from residual PEI. The overall yield of the protein D4S2 was 28.8 mg per 800 mL cells (final cultivation OD₆₀₀ ∼2) which gives an approximate 79% D4S2-protein yield. In comparison with the previously reported chromatographic purification of D4S2 protein (Wibowo et al., 2015), the final yield of D4S2 protein is increased fourfold in this study. The bio-produced protein D4S2 was proved to retain it emulsification and biosilicification functionalities enabling the formation of oil-core silica-shell nanocapsules at near-neutral pH and room temperature without the use of any toxic organic solvents, confirming no adverse effects due to bioprocess simplification. This work demonstrates that, through proper bioprocess engineering including the removal of critical contaminants such as DNA, a more efficient, simple, and scalable purification process can be used for the high-yield bio-production of a recombinant templating protein useful in the synthesis of bio-inspired nanomaterials. This simplified process is expected to be easily adapted to recover other mineralizing helix bundle-based functional proteins from microbial cell factories. Biotechnol. Bioeng. 2017;114: 335-343. © 2016 Wiley Periodicals, Inc.

Encouragement of Enzyme Reaction Utilizing Heat Generation from Ferromagnetic Particles Subjected to an AC Magnetic Field

We propose a method of activating an enzyme utilizing heat generation from ferromagnetic particles under an ac magnetic field. We immobilize α-amylase on the surface of ferromagnetic particles and analyze its activity. We find that when α-amylase/ferromagnetic particle hybrids, that is, ferromagnetic particles, on which α-amylase molecules are immobilized, are subjected to an ac magnetic field, the particles generate heat and as a result, α-amylase on the particles is heated up and activated. We next prepare a solution, in which α-amylase/ferromagnetic particle hybrids and free, nonimmobilized chitinase are dispersed, and analyze their activities. We find that when the solution is subjected to an ac magnetic field, the activity of α-amylase immobilized on the particles increases, whereas that of free chitinase hardly changes; in other words, only α-amylase immobilized on the particles is selectively activated due to heat generation from the particles.

Facile and high-efficient immobilization of histidine-tagged multimeric protein G on magnetic nanoparticles

This work reports the high-efficient and one-step immobilization of multimeric protein G on magnetic nanoparticles. The histidine-tagged (His-tag) recombinant multimeric protein G was overexpressed in Escherichia coli BL21 by the repeated linking of protein G monomers with a flexible linker. High-efficient immobilization on magnetic nanoparticles was demonstrated by two different preparation methods through the amino-silane and chloro-silane functionalization on silica-coated magnetic nanoparticles. Three kinds of multimeric protein G such as His-tag monomer, dimer, and trimer were tested for immobilization efficiency. For these tests, bicinchoninic acid (BCA) assay was employed to determine the amount of immobilized His-tag multimeric protein G. The result showed that the immobilization efficiency of the His-tag multimeric protein G of the monomer, dimer, and trimer was increased with the use of chloro-silane-functionalized magnetic nanoparticles in the range of 98% to 99%, rather than the use of amino-silane-functionalized magnetic nanoparticles in the range of 55% to 77%, respectively.

Silica entrapment for significantly stabilized, energy-conducting light-harvesting complex (LHCII)

The major light-harvesting chlorophyll a/b complex (LHCII) of the photosynthetic apparatus in green plants consists of a membrane protein and numerous noncovalently bound pigments that make up about one-third of the molecular mass of the pigment-protein complex. Due to this high pigment density, LHCII is potentially interesting as a light-harvesting component in synthetic constructs. However, for such applications its stability needs to be significantly improved. In this work, LHCII was dramatically stabilized by enclosing it within polymerizing colloidal silica. The entrapped LHCII stayed functional at 50 °C for up to 24 h instead of a few minutes in detergent solution and clearly showed energy transfer between complexes. Entrapment yield was enhanced by a polycationic peptide attached to the N terminus. Both the extent of stabilization and the yield of entrapment strongly increased with decreasing diameters of the silica particles.

Enhanced heterologous protein display on bacterial magnetic particles using a lon protease gene deletion mutant in Magnetospirillum magneticum AMB-1

Bacterial magnetic particles (BacMPs) produced by the magnetotactic bacterium Magnetospirillum magneticum AMB-1, are used as magnetic supports or carriers for a variety of biomedical and environmental applications. Although protein expression systems on BacMPs have been established in previous studies, the expression efficiency was dependent on the introduced protein sequences. Recombinant human proteins are often poorly expressed on BacMPs because of proteolytic degradation by endogenous proteases. We constructed a lon protease gene deletion mutant strain (Δlon) of M. magneticum AMB-1 by homologous recombination to increase the efficiency of functional protein display on BacMPs using Δlon host cells. Wild-type and Δlon-M. magneticum AMB-1 cells were transformed using expression plasmids for human proteins, thyroid-stimulating hormone receptor (TSHR) and the class II major histocompatibility complex (MHC II) molecules onto BacMPs. Although mRNA expression of both TSHR and MHC II was the same level in the wild-type and Δlon transformants, the protein expression levels in Δlon transformants were significantly increased versus wild-type cells. Furthermore, the amounts of two different human proteins on BacMPs were successfully improved. This phenomenon could be due to the reduction of the degradation of target proteins in the Δlon strain. This is the first report to construct a protease deletion mutant in magnetotactic bacteria. The Δlon strain is a useful host to provide BacMPs displaying target proteins for various experimental, and ultimately, clinical applications.

D-amino acid oxidase-nanoparticle system: a potential novel approach for cancer enzymatic therapy

AIM

The authors propose a new magnetic nanoparticle-enzyme system for cancer therapy capable of targeting the enzyme and consequently decreasing the adverse effects, meanwhile improving the patient's life quality.

MATERIALS & METHODS

The authors have functionalized Fe3O4 nanoparticles with 3-amino-propyltriethoxysilane (APTES) and conjugated it to yeast D-amino acid oxidase (DAAO) by coupling this with glutaraldehyde.

RESULTS & CONCLUSION

The authors have tested the Fe3O4-APTES-DAAO system on three tumor cell lines. Exposed cells show, at the electron microscope level, nanoparticles on the surface of the plasma membrane and inside endocytic vesicles. Fe3O4-APTES-DAAO caused a substantial decrease of cell viability greatly augmented when D-alanine, a DAAO substrate, was added. Fe3O4-APTES-DAAO was demonstrated to be more effective than free DAAO, confirming the validity of the system in cancer therapy.

A novel technique for in situ aggregation of Gluconobacter oxydans using bio-adhesive magnetic nanoparticles

Here, we present a novel technique to immobilize magnetic particles onto whole Gluconobacter oxydans in situ via a synthetic adhesive biomimetic material inspired by the protein glues of marine mussels. Our approach involves simple coating of a cell adherent polydopamine film onto magnetic nanoparticles, followed by conjugation of the polydopamine-coated nanoparticles to G. oxydans which resulted in cell aggregation. After optimization, 21.3 mg (wet cell weight) G. oxydans per milligram of nanoparticle was aggregated and separated with a magnet. Importantly, the G. oxydan aggregates showed high specific activity and good reusability. The facile approach offers the potential advantages of low cost, easy cell separation, low diffusion resistance, and high efficiency. Furthermore, the approach is a convenient platform technique for magnetization of cells in situ by direct mixing of nanoparticles with a cell suspension.

A biosensor based on the self-entrapment of glucose oxidase within biomimetic silica nanoparticles induced by a fusion enzyme

We constructed a fusion protein (GOx-R5) consisting of R5 (a polypeptide component of silaffin) and glucose oxidase (GOx) that was expressed in Pichia pastoris. Silaffin proteins are responsible for the formation of a silica-based cell matrix of diatoms, and synthetic variants of the R5 protein can perform silicification in vitro[1]. GOx secreted by P. pastoris was self-immobilized (biosilicification) in a pH 5 citric buffer using 0.1M tetramethoxysilane as a silica source. This self-entrapment property of GOx-R5 was used to immobilize GOx on a graphite rod electrode. An electric cell designed as a biosensor was prepared to monitor the glucose concentrations. The electric cell consisted of an Ag/AgCl reference electrode, a platinum counter electrode, and a working electrode modified with poly(neutral red) (PNR)/GOx/Nafion. Glucose oxidase was immobilized by fused protein on poly(neutral red) and covered by Nafion to protect diffusion to the solution. The morphology of the resulting composite PNR/GOx/Nafion material was analyzed by scanning electron microscopy (SEM). This amperometric transducer was characterized electrochemically using cyclic voltammetry and amperometry in the presence of glucose. An image produced by scanning electron microscopy supported the formation of a PNR/GOx complex and the current was increased to 1.58 μA cm(-1) by adding 1mM glucose at an applied potential of -0.5 V. The current was detected by way of PNR-reduced hydrogen peroxide, a product of the glucose oxidation by GOx. The detection limit was 0.67mM (S/N=3). The biosensor containing the graphite rod/PNR/GOx/Nafion detected glucose at various concentrations in mixed samples, which contained interfering molecules. In this study, we report the first expression of R5 fused to glucose oxidase in eukaryotic cells and demonstrate an application of self-entrapped GOx to a glucose biosensor.

Practical application of synthetic biology principles

Synthetic biology can be defined as the "repurposing and redesign of biological systems for novel purposes or applications, " and the field lies at the interface of several biological research areas. This broad definition can be taken to include a variety of investigative endeavors, and successful design of new biological paradigms requires integration of many scientific disciplines including (but not limited to) protein engineering, metabolic engineering, genomics, structural biology, chemical biology, systems biology, and bioinformatics. This review focuses on recent applications of synthetic biology principles in three areas: (i) the construction of artificial biomolecules and biomaterials; (ii) the synthesis of both fine and bulk chemicals (including biofuels); and (iii) the construction of "smart" biological systems that respond to the surrounding environment.

Carrier-free immobilized enzymes for biocatalysis

Methods for the preparation of carrier-free insoluble enzymes are reviewed. The technology of cross-linked enzyme aggregates has now been applied to a range of synthetically useful activities. Fusion proteins are also gaining momentum because they allow a relatively selective aggregation or even a specific self-assembly of the desired enzyme activity into insoluble particles in the absence of potentially denaturing chemicals required for precipitation and cross-linking. Recycling of insoluble protein particles for multiple rounds of batchwise reaction has been demonstrated in selected biotransformations. However, for application in a fully continuous biocatalytic process, low resistance to mechanical stress and high compressibility are issues for consideration on carrier-free enzyme particles.

Stabilization of D-amino acid oxidase from Rhodosporidium toruloides by immobilization onto magnetic nanoparticles

D-amino acid oxidase from Rhodosporidium toruloides was immobilized onto glutaraldehyde-activated magnetic nanoparticles. Approximately four enzyme molecules were attached to one magnetic nanoparticle when the weight ratio of the enzyme to the support was 0.12. After immobilization, the T(m) was increased from 45 degrees C of the free form to 55 degrees C. In the presence of 20 mM H2O2, the immobilized form retained 93% of its activity after 5 h while the free form was completely inactivated after 3.5 h.