Development and validation of a rapid and sensitive HPLC method for the quantification of 5-fluorocytosine and its metabolites

HSPiP, Computational Modeling, and QbD-Assisted Optimized Method Validation of 5-Fluorouracil for Transdermal Products

This study addressed the simplest and most efficient HPLC (high-performance liquid chromatography) method for the estimation of 5-fluorouracil (5-FU) from rat blood plasma by implementing the Hansen solubility parameters (HSP), computation prediction program, and QbD (quality by design) tool. The mobile phase selection was based on the HSP predictions and experimental data. The Taguchi model identified seven variables (preoptimization) to screen two factors (mobile phase ratio as A and column temperature as B) at three levels as input parameters in "CCD (central composite design)" optimization (retention time as Y1 and peak area as Y2). The stability study (freeze-thaw cycle and short- and long-term stability) was conducted in the rat plasma. Results showed that HSPiP-based HSP values and computational model-based predictions were well simulated with the experimental solubility data. Acetonitrile (ACN) was relatively suitable over methanol as evidenced by the experimental solubility value, HSP predicted parameters (δh of 5-FU - δh of ACN = 8.3-8.3 = 0 as high interactive solvent whereas δh of 5-FU - δh of methanol = 8.3-21.7 = -13.4), and instrumental conditions. CCD-based dependent variables (Y1 and Y2) exhibited the best fit of the model as evidenced by a high value of combined desirability (0.978). The most robust method was adopted at A = 96:4 and B = 40 °C to get earlier Y1 and high Y2 as evidenced by high desirability (D) = 0.978 (quadratic model with p < 0.0023). The estimated values of LLOD and LLOQ were found to be 0.11 and 0.36 μg/mL, respectively with an accuracy range of 94.4-98.7%. Thus, the adopted method was the most robust, reliable, and reproducible methodology for pharmacokinetic parameters after the transdermal application of formulations in the rat.

Optimization of Synthesis of Silver Nanoparticles Conjugated with Lepechinia meyenii (Salvia) Using Plackett-Burman Design and Response Surface Methodology—Preliminary Antibacterial Activity

In the present investigation, an ethanolic fraction (EF) of Lepechinia meyenii (salvia) was prepared and fractionated by gradient column chromatography, and the main secondary metabolites present in the EF were identified by HPLC-MS. Silver nanoparticles (AgNPs) were synthesized and conjugated with the EF of Lepechinia meyenii (salvia). The AgNPs synthesis was optimized using Plackett-Burman design and response surface methodology (RSM), considering the following independent variables: stirring speed, synthesis pH, synthesis time, synthesis temperature and EF volume. The AgNPs synthesized under the optimized conditions were characterized by UV visible spectroscopy (UV-VIS), Fourier Transform Infrared Spectroscopy (FT-IR), Dynamic Light Scattering (DLS) and Scanning Transmission Electron Microscopy (STEM). The antibacterial activity of the AgNPs against Staphylococcus aureus (ATCC® 25923) was evaluated. The following flavonoids were identified: rosmarinic acid, diosmin and hesperetin-7-O-rutinoside. The optimized conditions for the synthesis of nanoparticles were pH 9.45, temperature 49.8 °C, volume of ethanolic fraction 152.6 µL and a reaction time of 213.2 min. The obtained AgNPs exhibited an average size of 43.71 nm and a resonance plasmon of 410–420 nm. Using FT-IR spectroscopy, the disappearance of the peaks between 626.50 and 1379.54 cm−1 was evident with the AgNPs, which would indicate the participation of these functional groups in the synthesis and protection of the nanoparticles. A hydrodynamic size of 47.6 nm was obtained by DLS, while a size of 40–60 nm was determined by STEM. The synthesized AgNPs conjugated with the EF showed a higher antibacterial activity than the EF alone. These results demonstrate that the AgNPs synthesized under optimized conditions conjugated with the EF of the Lepechinia meyenii (salvia) presented an increased antibacterial activity.

Green Synthesis of a Novel Silver Nanoparticle Conjugated with Thelypteris glandulosolanosa (Raqui-Raqui): Preliminary Characterization and Anticancer Activity

In the last decade, the green synthesis of nanoparticles has had a prominent role in scientific research for industrial and biomedical applications. In this current study, silver nitrate (AgNO3) was reduced and stabilized with an aqueous extract of Thelypteris glandulosolanosa (Raqui-raqui), forming silver nanoparticles (AgNPs-RR). UV-vis spectrophotometry, dynamic light scattering (DLS), and scanning transmission electron microscopy (STEM) were utilized to analyze the structures of AgNPs-RR. The results from this analysis showed a characteristic peak at 420 nm and a mean hydrodynamic size equal to 39.16 nm, while the STEM revealed a size distribution of 6.64–51.00 nm with an average diameter of 31.45 nm. Cellular cytotoxicity assays using MCF-7 (ATCC® HTB-22™, mammary gland breast), A549 (ATCC® CCL-185, lung epithelial carcinoma), and L929 (ATCC® CCL-1, subcutaneous connective tissue of Mus musculus) demonstrated over 42.70% of MCF-7, 59.24% of A549, and 8.80% of L929 cells had cell death after 48 h showing that this nanoparticle is more selective to disrupt neoplastic than non-cancerous cells and may be further developed into an effective strategy for breast and lung cancer treatment. These results demonstrate that the nanoparticle surfaces developed are complex, have lower contact angles, and have excellent scratch and wear resistance.

Physical and Mechanical Characterization of a Functionalized Cotton Fabric with Nanocomposite Based on Silver Nanoparticles and Carboxymethyl Chitosan Using Green Chemistry

Cotton is the most widely used natural fiber for textiles but its innate capacity to absorb moisture, retain oxygen, and high specific surface area make it more prone to microbial contamination, becoming an appropriate medium for the growth of bacteria and fungi. In recent years, the incorporation of silver nanoparticles in textile products has been widely used due to their broad-spectrum antibacterial activity and low toxicity towards mammalian cells. The aim of the current study is to synthesize and characterize a nanocomposite based on silver nanoparticles and carboxymethyl chitosan (AgNPs-CMC), which was utilized to provide a functional finish to cotton fabric. The scanning electron microscope (SEM) to produce a scanning transmission electron microscope (STEM) image showed that the nanocomposite presents AgNPs with a 5–20 nm size. The X-ray diffraction (XRD) analysis confirmed the presence of silver nanoparticles. The concentration of silver in the functionalized fabric was evaluated by inductively coupled plasma optical emission spectrometry (ICP-OES), which reported an average concentration of 13.5 mg of silver per kg of functionalized fabric. SEM showed that silver nanoparticles present a uniform distribution on the surface of the functionalized cotton fabric fibers. On the other hand, by infrared spectroscopy, it was observed that the functionalized fabric variation (compared to control) had a displaced peak of intensity at 1594.32 cm−1, corresponding to carboxylate anions. Similarly, Raman spectroscopy showed an intense peak at 1592.84 cm−1, which corresponds to the primary amino group of carboxymethyl chitosan, and a peak at 1371.5 cm−1 corresponding to the carboxylic anions. Finally, the physical and mechanical tests of tensile strength and color index of the functional fabric reported that it was no different (p ˃ 0.05) than the control fabric. Our results demonstrate that we have obtained an improved functionalized cotton fabric using green chemistry that does not alter intrinsic properties of the fabric and has the potential to be utilized in the manufacturing of hospital garments.

Antibacterial and Antifungal Activity of Functionalized Cotton Fabric with Nanocomposite Based on Silver Nanoparticles and Carboxymethyl Chitosan

Cotton is the most widely used natural fiber for textiles; however, the capacity of cotton fibers to absorb large amounts of moisture, retain oxygen, and have a high specific surface area makes them more prone to microbial contamination, becoming an appropriate medium for the growth of bacteria and fungi. In recent years, the incorporation of silver nanoparticles in textile products has been widely used due to their broad-spectrum antibacterial activity and low toxicity towards mammalian cells. The aim of the current study is to continue the assessment of our developed nanocomposite and evaluate the antibacterial and antifungal activity of the nanocomposite based on silver nanoparticles and carboxymethyl chitosan (AgNPs-CMC) against Escherichia coli, Staphylococcus aureus, and Candida albicans, evaluated by the well diffusion method. The antibacterial activity against E. coli and S. aureus was also evaluated by the qualitative method of inhibition zone and the quantitative method of colony counting. Likewise, the antifungal activity of the functionalized fabric against Candida albicans and Aspergillus niger was determined by the inhibition zone method and the antifungal activity method GBT 24346-2009, respectively. The functionalized fabric showed 100% antibacterial activity against E. coli and S. aureus and good antifungal activity against C. albicans and A. niger. Our results indicate that the functionalized fabric could be used in garments for hospital use to reduce nosocomial infections.

Determination of 5-fluorocytosine, 5-fluorouracil, and 5-fluorouridine in hospital wastewater by liquid chromatography-mass spectrometry

Chemotherapeutics are pharmaceutical compounds the occurrence of which in the environment is of growing concern because of the increase in treatments against cancer diseases. They can reach the aquatic ecosystems after passing through wastewater treatment plants without complete removal. One of the most frequently used chemotherapeutics is 5-fluorouracil which exhibits a strong cytostatic effect. In this paper, an analytical methodology was developed, validated, and applied to determine 5-fluorouracil, its precursor, 5-fluorocytosine, and its major active metabolite, 5-fluorouridine, in hospital wastewater samples. Due to the expected low concentrations after dilution and interferences present in such a complex matrix, a very selective and sensitive detection method is required. Moreover, an extraction method must be implemented prior to the determination in order to purify the sample extract and preconcentrate the target analytes at micrograms per liter concentration levels. Solid-phase extraction followed by liquid chromatography with tandem mass spectrometry was the combination of choice and all included parameters were studied. Under optimized conditions for wastewater samples analysis, recoveries from 63 to 108% were obtained, while intraday and interday relative standard deviations never exceeded 20 and 25%, respectively. Limits of detection between 61 and 620 ng/L were achieved. Finally, the optimized method was applied to samples from hospital wastewater effluents.

Pharmacokinetics of continuous transarterial infusion of 5-fluorouracil in patients with advanced hepatocellular carcinoma

Numerous studies concerning hepatic arterial infusion chemotherapy (HAIC) have been conducted by adopting regimens containing 5-fluorouracil (FU), with a favourable efficacy compared with conventional transcatheter arterial chemoembolisation (TACE) treatment; however, the detailed mechanism of HAIC remains unclear. The present study aimed to evaluate peripheral concentration time curves of 5-FU administered through the hepatic artery, which may additionally explain the mechanism of action of HAIC. A total of 10 eligible patients underwent transcatheter arterial embolization and a 2-day HAIC treatment regimen using a folinic acid, fluorouracil and oxaliplatin regimen. Peripheral venous blood sampling was performed in each patient prior to infusion, and at 0, 0.5, 1, 1.5, 2, 5, 10, 15, 22 and 23 h following the start of infusion. The blood sample at 0 h was analysed for dihydropyrimidine dehydrogenase (DPD) levels by high performance liquid chromatography, and the rest of the samples were analysed for 5-FU by optimised liquid chromatography-mass spectrometry (LC-MS). The lower limit of quantification of optimised LC-MS for 5-FU was 5 ng/ml. The steady-state plasma concentration of 5-FU administered through the hepatic artery was achieved after 15 h. This concentration largely varied, ranging from 8.64-152.00 ng/ml. Optimised LC-MS may detect low concentrations of 5-FU. The steady-state concentration of 5-FU administered through the hepatic artery was achieved after 15 h. DPD levels were analysed through determining the ratio of plasma uracil (U) and dihydrouracil (UH2) by HPLC, and the results indicated a mild DPD deficiency in the patients with HCC. These results may provide a basis for the explanation of the clinical efficacy of HAIC, and to additionally optimise its efficacy.

Validation of an isocratic HPLC method to detect 2-fluoro-beta-alanine for the analysis of dihydropyrimidine dehydrogenase activity

The efficacy of the chemotherapeutic drug 5'-fluorouracil is reduced by catabolism to 2'-fluoro-beta-alanine (FBAL), a three-step reaction in which dihydropyrimidine dehydrogenase (DPD) catalyzes the rate-limiting step. To study in vitro DPD activity, we developed and validated an isocratic, reverse-phase HPLC method to detect and quantify FBAL without using multiple columns or radiolabeled substrates. Pre-column derivatization of FBAL was performed using o-phthalaldehyde in the presence of two sulfur donors, ethanthiol or beta-mercaptoethanol, and the resulting products assayed. Calibration curves were linear over a range of 10-200 microg/ml and the method was successfully applied to the examination of DPD activity in cultured cells.

Bacterial cytosine deaminase mutants created by molecular engineering show improved 5-fluorocytosine-mediated cell killing in vitro and in vivo

Cytosine deaminase is used in combination with 5-fluorocytosine as an enzyme-prodrug combination for targeted genetic cancer treatment. This approach is limited by inefficient gene delivery and poor prodrug conversion activities. Previously, we reported individual point mutations within the substrate binding pocket of bacterial cytosine deaminase (bCD) that result in marginal improvements in the ability to sensitize cells to 5-fluorocytosine (5FC). Here, we describe an expanded random mutagenesis and selection experiment that yielded enzyme variants, which provide significant improvement in prodrug sensitization. Three of these mutants were evaluated using enzyme kinetic analyses and then assayed in three cancer cell lines for 5FC sensitization, bystander effects, and formation of 5-fluorouracil metabolites. All variants displayed 18- to 19-fold shifts in substrate preference toward 5FC, a significant reduction in IC(50) values and improved bystander effect compared with wild-type bCD. In a xenograft tumor model, the best enzyme mutant was shown to prevent tumor growth at much lower doses of 5FC than is observed when tumor cells express wild-type bCD. Crystallographic analyses of this construct show the basis for improved activity toward 5FC, and also how two different mutagenesis strategies yield closely related but mutually exclusive mutations that each result in a significant alteration of enzyme specificity.