Hierarchically Porous Heteroatoms‐doped Vesica‐like Carbons as Highly Efficient Bifunctional Electrocatalysts for Zn‐air Batteries

Ternary Heteroatom-Doped Carbon As a High-Performance Metal-Free Catalyst for Electrochemical Ammonia Synthesis

The electrochemical nitrogen reduction reaction (NRR) has garnered much attention, but the major challenge remains with efficient electrocatalysts. Metal-free carbonaceous materials, doped with heteroatoms and structural defects, present a promising alternative to metal-based catalysts. This study introduces a novel strategic stepwise synthesis strategy of defective nitrogen-doped carbon material, further doped with secondary heteroatoms boron and fluorine (FBDG). These secondary atoms in combination create additional active sites for nitrogen adsorption and activation and suppress the hydrogen evolution reaction (HER). The synergistic effect of three heteroatoms and induced defects in the catalyst enhances electron-donor behavior, improving π bonding within the carbon framework and facilitating the electron transfer processes during NRR, resulting in a significantly high Faradaic efficiency of 38.1% in the case of metal-free electrocatalysts. The theoretical calculation reveals that FBDG possesses a sufficient charge density to reduce nitrogen at a low overpotential following an alternating free energy pathway. The reaction intermediates are thereby identified by in situ ATR-FTIR studies. For the rapid screening of ammonia, we used a rotating ring disk system (RRDE) and did a kinetic study. The high efficiency, stability, and cost-effectiveness of FBDG position it as a strong contender for sustainable ammonia production and pave the way for future advancements in NRR.

Cooperation between holey N-doped carbon and Ni nanoparticles as an efficient electrocatalyst for the hydrogen evolution reaction

Exploring non-noble and high-performance metal catalysts to replace platinum-based catalysts for the hydrogen evolution reaction (HER) via electrochemical water splitting significantly alleviates environmental pollution and the energy crisis. However, the synthetic approaches of such electrocatalysts are generally complex and challenging for large-scale production. Herein, a facile and green solid-state synthesis of Ni nanoparticles decorated with N-doped porous carbon is presented. These materials are derived from chitosan as carbon, nitrogen sources, and nickel acetate as a nickel source with NaCl as a template. The synthesis procedure is simple to scale up without an organic solvent. Benefiting from its porous structure, splendid conductivity, and the synergistic effect of Ni nanoparticles and holey N-doped carbon, the as-prepared Ni@CN exhibits superior HER performance in 1 M KOH with a low potential of 121 mV at 10 mA cm-2. These findings indicate that the convenient and environmentally friendly synthesis approach provides a novel method for large-scale synthesis of HER electrocatalysts for industrial electrolytic water splitting applications.

Two-dimensional architecture of N,S-codoped nanocarbon composites embedding few-layer MoS2 for efficient lithium storage

The exploration and advancement of highly efficient anode materials for lithium-ion batteries (LIBs) are critical to meet the growing demands of the energy storage market. In this study, we present an easily scalable synthesis method for the one-pot formation of few-layer MoS2 nanosheets on a N,S dual-doped carbon monolith with a two-dimensional (2D) architecture, termed MoS2/NSCS. Systematic electrochemical measurements demonstrate that MoS2/NSCS, when employed as the anode material in LIBs, exhibits a high capacity of 681 mA h g-1 at 0.2 A g-1 even after 110 cycles. The exceptional electrochemical performance of MoS2/NSCS can be attributed to its unique porous 2D architecture. The few-layer MoS2 sheets with a large interlayer distance reduce ion diffusion pathways and enhance ion mobility rates. Additionally, the N,S-doped porous carbon matrix not only preserves structural integrity but also facilitates electronic conductivity. These combined factors contribute to the reversible electrochemical activities observed in MoS2/NSCS, highlighting its potential as a promising anode material for high-performance LIBs.

Intermittent investigations on attenuation mechanism of rechargeable zinc-air batteries during charge/discharge cycles

Rechargeable zinc-air batteries (RZABs) are an ideal substitute for energy storage, but the short cycle longevity during long-term charge/discharge operation is one of the bottleneck factors that seriously restrict commercial application. Herein, the FeCo alloy/N, S co-doped carbon aerogel (NSCA/FeCo) were prepared as catalysts of cathode for RZABs. We investigated the polarization and impedance on long-term cycles during the battery operation to explore the attenuation mechanism. The results indicated that the roundtrip efficiency of batteries during charge/discharge cycles reduced fast initially and then slow. Besides, the comparative experiment was tested through the replacement of a new electrolyte and a zinc sheet. It is manifested that the failure of the battery is mainly due to the attenuation of the air cathode performance. Therefore, to further disclose the influencing factors and internal mechanisms of air cathode performance degradation, we conducted a series of characterization and testing, including the hydrophilicity, surface morphology, elemental composition, and electrochemical performance of three-electrode systems at different cycle times. This work not only provides a theoretical basis for deeply comprehending the attenuation mechanism of the cathode but also serves a reference for the material design and operating condition optimization of RZABs.

Rechargeable Zinc-Air Batteries: Advances, Challenges, and Prospects

Rechargeable zinc-air batteries (Re-ZABs) are one of the most promising next-generation batteries that can hold more energy while being cost-effective and safer than existing devices. Nevertheless, zinc dendrites, non-portability, and limited charge-discharge cycles have long been obstacles to the commercialization of Re-ZABs. Over the past 30 years, milestone breakthroughs have been made in technical indicators (safety, high energy density, and long battery life), battery components (air cathode, zinc anode, and gas diffusion layer), and battery configurations (flexibility and portability), however, a comprehensive review on advanced design strategies for Re-ZABs system from multiple angles is still lacking. This review underscores the progress and strategies proposed so far to pursuit the high-efficiency Re-ZABs system, including the aspects of rechargeability (from primary to rechargeable), air cathode (from unifunctional to bifunctional), zinc anode (from dendritic to stable), electrolytes (from aqueous to non-aqueous), battery configurations (from non-portable to portable), and industrialization progress (from laboratorial to practical). Critical appraisals of the advanced modification approaches (such as surface/interface modulation, nanoconfinement catalysis, defect electrochemistry, synergistic electrocatalysis, etc.) are highlighted for cost-effective flexible Re-ZABs with good sustainability and high energy density. Finally, insights are further rendered properly for the future research directions of advanced zinc-air batteries.

Aqueous Rechargeable Zn-N2 Battery Assembled by Bifunctional Cobalt Phosphate Nanocrystals-Loaded Carbon Nanosheets for Simultaneous NH3 Production and Power Generation

Developing cost-effective and controllable technologies beyond traditional overall N₂ electrocatalysis is critical for the large-scale production of NH₃ through electrochemical N₂ reduction reaction (NRR) under ambient conditions. Herein, the aqueous rechargeable Zn-N₂ battery, assembled by coupling the bifunctional cobalt phosphate nanocrystals-loaded heteroatoms-doped carbon nanosheets (CoPi/NPCS) as cathode electrocatalyst and the commercial Zn plate as anode with KOH electrolyte, was fabricated for the sustainable reduction of N₂ to NH₃ and power generation during discharge process. Benefiting from the desirable active components of cobalt phosphate nanocrystals and the synergistic effect between nanocrystals and carbon substrates, the CoPi/NPCS catalyst exhibits the enhanced NRR and oxygen evolution reaction (OER) performance in alkaline electrolyte. And the cobalt phosphates are confirmed as active components through the associative pathway toward NRR. When measured in the flow battery configuration with gas diffusion electrode by flowing N₂ during discharge, this CoPi/NPCS-catalyzed Zn-N₂ battery enables the high N₂-to-NH₃ yield rate of 14.7 μg h^-1 mg_cat.^-1 and Faradaic efficiency of 16.35% at 0.6 V vs Zn²⁺/Zn, which can be able to maintain stable in discharge processes during cycling tests. Moreover, the impressive power output of the peak power density of 0.49 mW cm^-2 and the energy density of 147.6 mWh g_zn^-1 are still achieved by this Zn-N₂ battery, which are both higher than those of previously reported Zn-N₂ batteries. This work not only provides the guideline for the rational design of robust and active bifunctional NRR-OER catalysts but also develops a reasonable and promising technology for efficient electrochemical N₂-to-NH₃ and power generation.

Bimetallic conjugated microporous polymer derived B,N-doped porous carbon wrapped Co3Fe7 alloy composite as a bifunctional oxygen electrocatalyst for a breathing Zn–air battery

A B, N-codoped carbon-based bifunctional oxygen electrocatalyst was prepared. This presented outstanding catalytic activity for electrochemical oxygen reduction and evolution reactions and could be used as the catalyst for a breathing Zn–air battery.

Recent advances of noble-metal-free bifunctional oxygen reduction and evolution electrocatalysts

Bifunctional oxygen reduction and evolution constitute the core processes for sustainable energy storage. The advances on noble-metal-free bifunctional oxygen electrocatalysts are reviewed.

Transition Metal Phosphide-Based Materials for Efficient Electrochemical Hydrogen Evolution: A Critical Review

As hydrogen has been increasingly considered as promising sustainable energy supply, electrochemical overall water splitting driven by highly efficient non-noble metal electrocatalysts has aroused extensive attention. Transition metal phosphides (TMPs) have demonstrated remarkable electrocatalytic performance, including high activity and robust durability towards hydrogen evolution reaction (HER) in acidic and alkaline as well as neutral electrolytes. In this Review, up-to-date progress of TMP-based HER electrocatalysts is summarized. Various synthesis strategies of TMPs based on selected phosphorus sources are presented, and the reaction mechanisms of HER as well as the contribution of phosphorus in the TMPs to HER activity are briefly discussed. The multiscale approaches for promoting the activity and stability of TMP-based catalysts are discussed with respect to intrinsic electronic structure, hybrids, microstructure, and working electrode interface. Some crucial issues and future perspectives of TMPs are pointed out. These modulated approaches and challenges are also instructive for constructing other high-activity energy-related electrocatalysts.

Recent advances in the template-confined synthesis of two-dimensional materials for aqueous energy storage devices

The template-confined synthesis strategy is a simple and effective methodology to prepare two-dimensional nanomaterials. It has multiple advantages including green process, controllable morphology and adjustable crystal structure, and therefore, it is promising in the energy storage realm to synthesize high-performance electrode materials. In this review, we summarize the recent advances in the template-confined synthesis of two-dimensional nanostructures for aqueous energy storage applications. The material design is discussed in detail to accommodate target usage in aqueous supercapacitors and zinc metal batteries. The remaining challenges and future prospective are also covered.

Iron-Salt Thermally Emitted Strategy to Prepare Graphene-like Carbon Nanosheets with Trapped Fe Species for an Efficient Electrocatalytic Oxygen Reduction Reaction in the All-pH Range

Earth-abundant, highly active, and durable electrocatalysts toward oxygen reduction reaction (ORR) in the all-pH range are highly required for practical application of electrochemical energy conversion technologies. Here, non-noble-metal graphene-like carbon nanosheets with trapped Fe species (Fe-N/GPC) are developed by an iron-salt thermally emitted strategy, which integrates the modulation of the electronic structure for boosted intrinsic activity with the engineering of hierarchical porosity for enriched active sites. The ORR electrocatalytic performance of Fe-N/GPC-800 achieves the half-wave potentials of 0.86 and 0.77 V with limiting current densities of 6.1 and 4.7 mA cm^-2 in 0.1 M KOH and 0.1 M PBS solutions, respectively, as well as respectable stability. Furthermore, Fe-N/GPC-800 also shows considerable ORR catalytic activity in acid media accompanied by stability superior to those of Pt/C catalysts. The as-prepared Fe-N/GPC-800, as a cathodic catalyst, is assessed in a Zn-air battery test and delivers an open-circuit voltage of 1.44 V with a power density of 134 mW cm^-2 as well as the outstanding durability after 350 cycles at 10 mA cm^-2, demonstrating appreciable promise in application of metal-air batteries. This work provides an enabling and versatile strategy for facile and scale-up preparation of high-performance non-noble-metal electrocatalysts.