Mass Tansfer Characteristics of a Microchannel Device of Split-Flow Type

Microfluidic approaches for accessing thermophysical properties of fluid systems

Thermophysical properties of fluid systems under high pressure and high temperature conditions are highly desirable as they are used in many industrial processes both from a chemical engineering point of view and to push forward the development of modeling approaches.

Quantitative determination of glucose transfer between concurrent laminar water streams in a H-shaped microchannel

To explore the applicability of a laminar fluid diffusion interface (LFDI) for the controlled feeding of microbioreactors, glucose diffusion experiments were carried out in a rounded H-shaped microstructure etched in a glass substrate. The diffusion channel of the microstructure had a length of 4 mm and a depth of 50 microm with a trapezoidal cross section with a width of 100 microm at the bottom and 200 microm at the surface of the channel. The microchannel was operated at residence times of less than 1 s ensuring high-mass-transfer rates. It was confirmed, both by microscopic observations as well as computational fluid dynamics (CFD) studies that the flow characteristics in the microchannel were fully laminar. Special attention was paid to flow splitting at the end of the channel, because the CFD simulations indicated that the performance of the device was sensitive to unequal flow splitting. The difference in outflow volume of the two streams was measured to be small (1.25% +/- 0.6%). The measured glucose concentration in both exit ports at a fixed residence time was found to be stable in time and reproducible in multiple experiments. CFD simulation was shown to be a powerful tool for estimating the mass transfer in the LFDI, even at very short residence times. The results obtained in this work show the applicability of LFDI for the controlled diffusive supply of a solute to a water stream, with as possible application substrate and/or precursor feeding to microreactors.