[Ni3 (HCOO)6 ]/Poly(styrene-b -butadiene-b -styrene) Mixed-Matrix Membranes for CH4 /N2 Gas Separation

Non-CO2 greenhouse gas separation using advanced porous materials

Global warming has become a growing concern over decades, prompting numerous research endeavours to reduce the carbon dioxide (CO2) emission, the major greenhouse gas (GHG). However, the contribution of other non-CO2 GHGs including methane (CH4), nitrous oxide (N2O), fluorocarbons, perfluorinated gases, etc. should not be overlooked, due to their high global warming potential and environmental hazards. In order to reduce the emission of non-CO2 GHGs, advanced separation technologies with high efficiency and low energy consumption such as adsorptive separation or membrane separation are highly desirable. Advanced porous materials (APMs) including metal-organic frameworks (MOFs), covalent organic frameworks (COFs), hydrogen-bonded organic frameworks (HOFs), porous organic polymers (POPs), etc. have been developed to boost the adsorptive and membrane separation, due to their tunable pore structure and surface functionality. This review summarizes the progress of APM adsorbents and membranes for non-CO2 GHG separation. The material design and fabrication strategies, along with the molecular-level separation mechanisms are discussed. Besides, the state-of-the-art separation performance and challenges of various APM materials towards each type of non-CO2 GHG are analyzed, offering insightful guidance for future research. Moreover, practical industrial challenges and opportunities from the aspect of engineering are also discussed, to facilitate the industrial implementation of APMs for non-CO2 GHG separation.

Selective Photonic Gasification of Strained Oxygen Clusters on Graphene for Tuning Pore Size in the Å Regime

Controlling the size of single-digit pores, such as those in graphene, with an Å resolution has been challenging due to the limited understanding of pore evolution at the atomic scale. The controlled oxidation of graphene has led to Å-scale pores; however, obtaining a fine control over pore evolution from the pore precursor (i.e., the oxygen cluster) is very attractive. Herein, we introduce a novel "control knob" for gasifying clusters to form pores. We show that the cluster evolves into a core/shell structure composed of an epoxy group surrounding an ether core in a bid to reduce the lattice strain at the cluster core. We then selectively gasified the strained core by exposing it to 3.2 eV of light at room temperature. This allowed for pore formation with improved control compared to thermal gasification. This is because, for the latter, cluster-cluster coalescence via thermally promoted epoxy diffusion cannot be ruled out. Using the oxidation temperature as a control knob, we were able to systematically increase the pore density while maintaining a narrow size distribution. This allowed us to increase H2 permeance as well as H2 selectivity. We further show that these pores could differentiate CH4 from N2, which is considered to be a challenging separation. Dedicated molecular dynamics simulations and potential of mean force calculations revealed that the free energy barrier for CH4 translocation through the pores was lower than that for N2. Overall, this study will inspire research on the controlled manipulation of clusters for improved precision in incorporating Å-scale pores in graphene.

Transforming 3D CAU-10-H into 2D Materials with High Base Stability for Membrane Separation

Two-dimensional (2D) nanomaterials have received a significant research attention owing to their unique chemical and physical properties. These materials not only provide the chemically active sites and exposed surface atoms, but also display the porous nature suitable for their use as membranes for gas separation. In this study, 3D CAU-10-H has been transformed into a novel alkali stabilized 2D CACl-10 (180). Though CACl-10 (180) is similar to AlOOH, it is a novel 2D nanomaterial synthesized by using 4-chloroisophthalic acid and aluminum nitrate nonahydrate, with thermal decomposition at 300 °C. Further, CACl-10 (180) is noted to retain its framework structure in strong alkali solutions, attributed to the alkali-resistant aluminum hydroxide. At the same time, it has been demonstrated that 3D CAU-10-H can also transform into 3D CACl-10 (140) and 3D CACl-10 (130), and the halogen atoms of the ligands (-Cl) affect the alkali stability of the materials. Subsequently, the PVAm-CACl-10 (180)/MPSf mixed matrix membranes were prepared and applied for CH₄ /N₂ separation. The developed membrane exhibits the CH₄ permeance of 1647.99 GPU with a CH₄ /N₂ selectivity of 3.1. As a result, 2D CACl-10 (180), with a strong alkali stability and an acceptable CH₄ /N₂ membrane separation performance, represents a high potential of application in the membrane separation process.