Label-Free Electrochemiluminescence Aptasensor for Highly Sensitive Detection of Acetylcholinesterase Based on Au-Nanoparticle-Functionalized g-C3 N4 Nanohybrid

Label/immobilization-free Cas12a-based electrochemiluminescence biosensor for sensitive DNA detection

Electrochemiluminescence (ECL) is one of the most sensitive techniques in the field of diagnostics. However, they typically require luminescent labeling and electrode surface biological modification, which is a time-consuming and laborious process involving multiple steps and may also lead to low reaction efficiency. Fabricating label/modification-free biosensors has become one of the most attractive parts for simplifying the ECL assays. In this work, the ECL luminophores carbon dots (CDs) were encapsulated in DNA hydrogel in situ by a simple rolling circle amplification (RCA) reaction. Upon binding of the target DNA, active Cas12a induces a collateral cleavage of the hydrogel's ssDNA backbone, resulting in a programmable degradation of the hydrogel and the release of CDs. By directly measuring the released CDs ECL, a simple and rapid label/modification-free detection of the target HPV-16 was realized. It is noted that this method allowed for 0.63 pM HPV-16 DNA detection without any amplification step, and it could take only ∼60 min for a fast test of a human serum sample. These results showed that our label/modification-free ECL biosensor has great potential for use in simple, rapid, and sensitive point-of-care (POC) detection.

Unmasking the Electrochemiluminescence Properties of Ternary Mn/Fe/Co Metals Doped Porous g-C3N4 Fiber-like Nanostructure

Graphitic-phase carbon nitride (g-C3N4) materials have exhibited increasingly remarkable performance as emerging electrochemiluminescence (ECL) emitters, owing to their unique optical and electronic properties; however, the ECL merits of porous g-C3N4 nanofibers doped with ternary metals are not yet explored. Deciphering the ECL properties of trimetal-doped g-C3N4 nanofibers could provide an exquisite pathway for ultrasensitive sensing and imaging with impressive advantages of minimal background signal, great sensitivity, and durability. Herein, we rationally synthesized g-C3N4 nanofibers doped atomically with Mn, Fe, and Co elements (Mn/Fe/Co/g-C3N4) in a one-pot via the protonation in ethanol and annealing process driven by the rolling up mechanism. The ECL performance of g-C3N4 with and without metal dopants was investigated and compared with standard Ru(bpy)32+ in the presence of potassium persulfate (K2S2O8) as the coreactant. Notably, g-C3N4 nanofibers doped with metal ions exhibited an ECL efficiency of 483% that was 4.83 times higher than that of Ru(bpy)32+. Mechanistic investigations unveiled that the g-C3N4 nanofibers possess a large surface area and, as a result, exhibit a reduced interfacial impedance within the porous microstructure. These factors contribute to the acceleration of charge transfer rates and the stabilization of charge carriers and excitons, ultimately facilitating the ECL process. This research endeavor may pave the way for a new hot research area and serves as a powerful tool for elucidating fundamental inquiries of ECL on one-dimensional g-C3N4 nanostructures.

Construction of Liquid Crystal-Based Sensors Using Enzyme-Linked Dual-Functional Nucleic Acid on Magnetic Beads

The development of liquid crystal (LC)-based sensors with superior performances such as high portability, excellent stability, great convenience, and remarkable sensitivity is highly demanded. This work proposes a new strategy for constructing the LC-based sensor using enzyme-linked dual-functional nucleic acid (d-FNA) on magnetic beads (MBs). The detection of kanamycin (KA) is demonstrated as a model. Acetylcholinesterase (AChE) is assembled onto the KA aptamer-modified MBs with a d-FNA strand that consists of an AChE aptamer and the complementary sequence of a KA aptamer. As the specific recognition of KA by its aptamer triggers the release of AChE from the MBs, the myristoylcholine (Myr) solution after incubation with the MBs causes the black image of the LCs due to the formation of the Myr monolayer at the aqueous/LC interface. Otherwise, in the absence of KA, AChE is still decorated on the MBs and causes the hydrolysis of Myr. Therefore, a bright image of LCs is obtained. The detection of KA is successfully achieved with a lower detection limit of 48.1 pg/mL. In addition, a thin polydimethylsiloxane (PDMS) layer-coated glass and a portable optical device are used to improve the stability and portability of the LC-based sensor to advance potential commercial applications. Furthermore, the detection of KA in milk with a portable device is demonstrated, showing the potential of the proposed enzyme-linked LC-based sensor.

Recent progress in assembly strategies of nanomaterials-based ultrasensitive electrochemiluminescence biosensors for food safety and disease diagnosis

The Electrochemiluminescence (ECL)-based biosensors have received considerable attention in food contaminants and disease diagnosis, due to their fascinating advantages such as low cost, fast analysis speed, wide linear range, high sensitivity, and excellent anti-interference ability. Meanwhile, with the vigorous development and improvement of nanotechnology, biosensor assembly strategies tend to diversify and be multifunctional. This review focuses on the representative ECL biosensors in food safety and disease diagnosis reported by our research group and other research groups based on nanomaterials assembly strategies in recent years. According to the different roles of nanomaterials played in the constitution of ECL biosensors, nanomaterials would be divided into the following two categories to be summarized: (1) Nanomaterials for signal amplification. (2) Nanomaterials as ECL emitters. Finally, this review prospects the perspectives on the future development direction of ECL biosensor in food safety and disease diagnosis.

Novel electrochemiluminescent assay for the aptamer-based detection of testosterone

This work presents a proof-of-concept assay for the detection and quantification of small molecules based on aptamer recognition and electrochemiluminescence (ECL) readout. The testosterone-binding (TESS.1) aptamer was used to demonstrate the novel methodology. Upon binding of the target, the TESS.1 aptamer is released from its complementary capture probe - previously immobilized at the surface of the electrode - producing a decrease in the ECL signal after a washing step removing the released (labeled) TESS.1 aptamer. The analytical capability of the ECL assay towards testosterone detection was investigated displaying a linear range from 0.39 to 1.56 μM with a limit of detection of 0.29 μM. The selectivity of the proposed assay was assessed by performing two different negative control experiments; i) detection of testosterone with a randomized ssDNA sequence and ii) detection of two other steroids, i.e. deoxycholic acid and hydrocortisone with the TESS.1 aptamer. In parallel, complementary analytical techniques were employed to confirm the suggested mechanism: i) native nano-electrospray ionization mass spectrometry (native nESI-MS) was used to determine the stoichiometry of the binding, and to characterize aptamer-target interactions; and, ii) isothermal titration calorimetry (ITC) was carried out to elucidate the dissociation constant (K_d) of the complex of testosterone and the TESS.1 aptamer. The combination of these techniques provided a complete understanding of the aptamer performance, the binding mechanism, affinity and selectivity. Furthermore, this important characterization carried out in parallel validates the real functionality of the aptamer (TESS.1) ensuring its use towards selective testosterone binding in further biosensors. This research will pave the way for the development of new aptamer-based assays coupled with ECL sensing for the detection of relevant small molecules.

Design of a ZnMoO4 porous nanosheet with oxygen vacancies as a better performance electrode material for supercapacitors

A ZnMoO₄ porous nanosheet with oxygen vacancies (ZnMoO₄-OV) was synthesized which delivers a preferable energy storage performance.

Industry Development of Derivative Functionalized Gold Nanomaterials and Their Application in Chemiluminescence Bioanalysis: Based on the Industrial Practice of China's Central Yunnan Urban Agglomeration

Electrochemiluminescence biosensor is an analytical method combining electrochemiluminescence technology with biosensor. Using nanomaterials as electrochemical luminescence sensor platform can not only immobilize a large number of biomolecules but also improve the performance of the sensor to realize the supersensitive detection of biomacromolecules. Although these methods have high sensitivity for bioanalysis, there are still some shortcomings which limit the practical application. Therefore, this paper discusses the development of functional gold nanomaterials industry and its application in chemiluminescence bioanalysis. In this paper, two methods of synthesizing luminescent functional gold nanomaterials at room temperature were studied by using chemiluminescent reagents as reducing agent and protective agent. Based on luminescent functionalized gold nanoparticles, immunoassay and DNA bioanalysis probes were constructed, and their applications in chemiluminescence and electrochemiluminescence bioanalysis were discussed. Finally, the simulation results show that the relative deviation between the experimental results and the existing clinical methods is less than 17%. The sensor has good stability and selectivity and can be used for the determination of CEA in human serum. The gold nanomaterials synthesized by further research have excellent chemiluminescence activity and can be used to label biomolecules and prepare biological probes. This article aims to explore the application of chemical methods in the transformation of new industries, to achieve breakthroughs in new products in industrial innovation, and to achieve the cross-fusion of management science and engineering disciplines and chemical disciplines. The industrial development of derivative functionalized gold nanomaterials has broad application prospects in biological analysis.

Recent advances in optical aptasensor technology for amplification strategies in cancer diagnostics

Aptamers are chemically synthetic single-stranded DNA or RNA molecules selected by molecular evolution. They have been widely used as attractive tools in biosensing and bioimaging because they can bind to a large variety of targets with high sensitivity and high affinity and specificity. As recognition elements, aptamers contribute in particular to cancer diagnostics by recognizing different cancer biomarkers, while they can also facilitate ultrasensitive detection by further employing signal amplification elements. Optical techniques have been widely used for direct and real-time monitoring of cancer-related biomolecules and bioprocesses due to the high sensitivity, quick response, and simple operation, which has greatly benefited cancer diagnostics. In this review, we highlight recent advances in optical platform-based sensing strategies for cancer diagnostics aided by aptamers. Limitations and current challenges are also discussed.

Emerging trends in sensors based on carbon nitride materials

A new class of functional materials, carbon nitrides, has recently attracted the attention of researchers.

Graphitic-phase carbon nitride-based electrochemiluminescence sensing analyses: recent advances and perspectives

This review describes the current trends in synthesis methods, signaling strategies, and sensing applications of g-C₃N₄-based ECL emitters.