Ionic Transport in Microhole Fluidic Diodes Based on Asymmetric Ionomer Film Deposits

Surface-dominant micro/nanofluidics for efficient green energy conversion

Green energy conversion in aqueous systems has attracted considerable interest owing to the sustainable clean energy demand resulting from population and economic growth and urbanization, as well as the significant potential energy from water resources and other regenerative sources coupled with fluids. In particular, molecular motion based on intrinsic micro/nanofluidic phenomena at the liquid-solid interface (LSI) is crucial for efficient and sustainable green energy conversion. The electrical double layer is the main factor affecting transport, interaction between molecules and surfaces, non-uniform ion distribution, synthesis, stimulated reactions, and motion by external renewable resources in both closed nanoconfinement and open surfaces. In this review, we summarize the state-of-the-art progress in physical and chemical reaction-based green energy conversion in LSI, including nanoscale fabrication, key mechanisms, applications, and limitations for practical implementation. The prospects for resolving critical challenges in this field and inspiring other promising research areas in the infancy stage (studying chemical and biological dynamics at the single-molecule level and nanofluidic neuromorphic computing) are also discussed.

Understanding Transient Ionic Diode Currents and Impedance Responses for Aquivion-Coated Microholes

Ionic diode based devices or circuits can be applied, for example, in electroosmotic pumps or in desalination processes. Aquivion ionomer coated asymmetrically over a Teflon film (5 μm thickness) with a laser-drilled microhole (approximately 10 μm diameter) gives a cationic diode with a rectification ratio of typically 10-20 (measured in 0.01 M NaCl with ±0.3 V applied bias). Steady state voltammetry, chronoamperometry, and electrochemical impedance spectroscopy data are employed to characterize the ionic diode performance parameters. Next, a COMSOL 6.0 finite element model is employed to quantitatively assess/compare transient phenomena and to extract mechanistic information by comparison with experimental data. The experimental diode time constant and diode switching process associated with a distorted semicircle (with a typical diode switching frequency of 10 Hz) in the Nyquist plot are reproduced by computer simulation and rationalized in terms of microhole diffusion-migration times. Fundamental understanding and modeling of the ionic diode switching process can be exploited in the rational/optimized design of new improved devices.

Scanning Ion Conductance Microscopy of Nafion-Modified Nanopores

Single nanopores in silicon nitride membranes are asymmetrically modified with Nafion and investigated with scanning ion conductance microscopy, where Nafion alters local ion concentrations at the nanopore. Effects of applied transmembrane potentials on local ion concentrations are examined, with the Nafion film providing a reservoir of cations in close proximity to the nanopore. Fluidic diodes based on ion concentration polarization are observed in the current-voltage response of the nanopore and in approach curves of SICM nanopipette in the vicinity of the nanopore. Experimental results are supported with finite element method simulations that detail ion depletion and enrichment of the nanopore/Nafion/nanopipette environment.

Asymmetric Nanochannel Network-Based Bipolar Ionic Diode for Enhanced Heavy Metal Ion Detection

A higher rectification degree in ionic diodes is required to achieve better performance in applications. Nonetheless, the active geometrical change that is critical for inducing electrical potential asymmetry is difficult to realize in typical ionic diodes because of the intrinsic limitation of the fabrication method. Here, we propose a nanochannel-network-based bipolar diode with a high rectification degree of ∼1600─the highest value realized until now, to the best of our knowledge. Such a high rectification is obtained based on the synergetic effect of the bipolar surface charge and the optimization of the microchannel through experimental studies and multiphysics numerical simulations. It induces ion concentrations at the heterogeneous junction based on the accumulation effect under the forward potential bias. In particular, this proposed molecular concentration occurs in the ohmic region without vortex and instability that is inevitable at the conventional nano-electrokinetic concentration. Combining this accumulation with the horizontally aligned configuration of the nanochannel network membrane (NCNM), a highly sensitive and quantitative mercury ion (Hg²⁺) sensor based on a fluorescent signal is fabricated that allows direct measurement using a general fluorescent microscope. The detection limit of Hg²⁺ is 10 pM, which is ∼10 times lower than the best detection limit realized so far (∼100 pM) in fluorescent dye-based detection. This demonstrates the potential of asymmetric NCNM for high-performance ion transport in applications such as energy conversion, based on its design and material flexibility.

Controllable ion transport induced by pH gradient in a thermally crosslinked submicrochannel heterogeneous membrane

Solid-state nanochannels have attracted considerable attention for their similar ion transport properties to biological ion channels. The construction of porous ion channels with good stability at the submicro/micrometer scale is very beneficial to develop large-area ion channel devices. In this manuscript, based on in-situ thermal crosslinking of a small organic molecule containing triphenylamine and styrene groups, we construct a heterogeneous membrane with asymmetrical charge and wettability on cylindrical anodic aluminum oxide (AAO) channels (D ≈ 319 nm). This heterogeneous membrane has typical ion current rectification characteristics with a high rectification ratio of 36.9 and good stability. This work provides an effective strategy for the construction of submicrochannel heterogeneous membranes and also broadens the application range of bionic ion channels.

Understanding Carbon Nanotube-Based Ionic Diodes: Design and Mechanism

The rectification of ion transport through biological ion channels has attracted much attention and inspired the thriving invention and applications of ionic diodes. However, the development of high-performance ionic diodes is still challenging, and the working mechanisms of ionic diodes constructed by 1D ionic nanochannels have not been fully understood. This work reports the systematic investigation of the design and mechanism of a new type of ionic diode constructed from horizontally aligned multi-walled carbon nanotubes (MWCNTs) with oppositely charged polyelectrolytes decorated at their two entrances. The major design and working parameters of the MWCNT-based ionic diode, including the ion channel size, the driven voltage, the properties of working fluids, and the quantity and length of charge modification, are extensively investigated through numerical simulations and/or experiments. An optimized ionic current rectification (ICR) ratio of 1481.5 is experimentally achieved on the MWCNT-based ionic diode. These results promise potential applications of the MWCNT-based ionic diode in biosensing and biocomputing. As a proof-of-concept, DNA detection and HIV-1 diagnosis is demonstrated on the ionic diode. This work provides a comprehensive understanding of the working principle of the MWCNT-based ionic diodes and will allow rational device design and optimization.

Infochemistry and the Future of Chemical Information Processing

Nowadays, information processing is based on semiconductor (e.g., silicon) devices. Unfortunately, the performance of such devices has natural limitations owing to the physics of semiconductors. Therefore, the problem of finding new strategies for storing and processing an ever-increasing amount of diverse data is very urgent. To solve this problem, scientists have found inspiration in nature, because living organisms have developed uniquely productive and efficient mechanisms for processing and storing information. We address several biological aspects of information and artificial models mimicking corresponding bioprocesses. For instance, we review the formation of synchronization patterns and the emergence of order out of chaos in model chemical systems. We also consider molecular logic and ion fluxes as information carriers. Finally, we consider recent progress in infochemistry, a new direction at the interface of chemistry, biology, and computer science, considering unconventional methods of information processing.

Polymers of Intrinsic Microporosity in the Design of Electrochemical Multicomponent and Multiphase Interfaces

Polymers of intrinsic microporosity (or PIMs) provide porous materials due to their highly contorted and rigid macromolecular structures, which prevent space-efficient packing. PIMs are readily dissolved in solvents and can be cast into robust microporous coatings and membranes. With a typical micropore size range of around 1 nm and a typical surface area of 700-1000 m² g^-1, PIMs offer channels for ion/molecular transport and pores for gaseous species, solids, and liquids to coexist. Electrode surfaces are readily modified with coatings or composite films to provide interfaces for solid|solid|liquid or solid|liquid|liquid or solid|liquid|gas multiphase electrode processes.

Electric Migration of Hydrogen Ion in Pore-Voltammetry Suppressed by Nafion Film

Micro-hole voltammetry exhibiting rectified current-voltage curves was performed in hydrochloric acid by varying the lengths and the diameters of the micro-holes on one end of which a Nafion film was mounted. Some voltammetric properties were compared with those in NaCl solution. The voltammograms were composed of two line-segments, the slope of one segment being larger than the other. They were controlled by electric migration partly because of the linearity of the voltammograms and partly the independence of the scan rates. Since the low conductance which appeared in the current from the hole to the Nafion film was proportional to the cross section area of the hole and the inverse of the length of the hole, it should be controlled by the geometry of the hole. The conductance of the hydrogen ion in the Nafion film was observed to be smaller than that in the bulk, because the transport rate of hydrogen ion by the Grotthuss mechanism was hindered by the destruction of hydrogen bonds in the film. In contrast, the conductance for the current from the Nafion to the hole, enhancing by up to 30 times in magnitude from the opposite current, was controlled by the cell geometry rather than the hole geometry except for very small holes. A reason for the enhancement is a supply of hydrogen ions from the Nafion to increase the concentration in the hole. The concentration of the hydrogen ion was five times smaller than that of sodium ion because of the blocking of transport of the hydrogen ion in the Nafion film. However, the rectification ratio of H+ was twice as large as that of Na+.

In situ synthesis of a MOFs/PAA hybrid with ultrahigh ionic current rectification

In recent decades, the ionic current rectification (ICR) property of asymmetric nanochannels has been widely explored in applications of energy conversion, gas separation, water purification and bioanalysis/sensors. How to fabricate nanofluidic devices with a high ICR characteristic remains of critical importance to the development of nanofluidics. Herein, we fabricated an asymmetric MOFs/PAA hybrid via in situ synthesis of a zeolitic imidazole framework (ZIF-90) on porous anodic alumina (PAA) nanochannels. The introduction of asymmetric geometry and charge distribution provides the hybrid with ultrahigh ionic rectification, which can be easily measured using an electrochemical detector. This rectification mechanism is elucidated via finite element simulation, which proves that asymmetric geometry as well as the protonation and deprotonation under varied pH values dominates the ICR property. With the advantages of low cost and facile fabrication while supporting high ionic current rectification, the prepared MOFs/PAA hybrid can be considered as a significant paradigm in nanofluidic systems and has potential applications in the fields of new ionic devices and energy conversion systems.

Switching Anionic and Cationic Semipermeability in Partially Hydrolyzed Polyacrylonitrile: A pH-Tunable Ionic Rectifier

Membrane materials with semipermeability for anions or for cations are of interest in electrochemical and nanofluidic separation and purification technologies. In this study, partially hydrolyzed polyacrylonitrile (phPAN) is investigated as a pH-switchable anion/cation conductor. When switching from anionic to cationic semipermeability, also the ionic current rectification effect switches for phPAN materials deposited asymmetrically onto a 5, 10, 20, or 40 μm diameter microhole in a 6 μm thick polyethylene-terephthalate (PET) film substrate. Therefore, ionic rectifier behavior can be tuned and used to monitor and characterize semipermeability. Effects of electrolyte type and concentration and pH (relative to the zeta potential at approximately 3.1) are investigated by voltammetry, chronoamperometry, and impedance spectroscopy. A computational model provides good qualitative agreement with the observed electrolyte concentration data. High rectification effects are observed for both cations (pH > 3.1) and anions (pH < 3.1) but only at relatively low ionic strengths.

Engineering Smart Nanofluidic Systems for Artificial Ion Channels and Ion Pumps: From Single-Pore to Multichannel Membranes

Biological ion channels and ion pumps with intricate ion transport functions widely exist in living organisms and play irreplaceable roles in almost all physiological functions. Nanofluidics provides exciting opportunities to mimic these working processes, which not only helps understand ion transport in biological systems but also paves the way for the applications of artificial devices in many valuable areas. Recent progress in the engineering of smart nanofluidic systems for artificial ion channels and ion pumps is summarized. The artificial systems range from chemically and structurally diverse lipid-membrane-based nanopores to robust and scalable solid-state nanopores. A generic strategy of gate location design is proposed. The single-pore-based platform concept can be rationally extended into multichannel membrane systems and shows unprecedented potential in many application areas, such as single-molecule analysis, smart mass delivery, and energy conversion. Finally, some present underpinning issues that need to be addressed are discussed.

Cationic Rectifier Based on a Graphene Oxide-Covered Microhole: Theory and Experiment

Cation transport through nanochannels in graphene oxide can be rectified to give ionic diode devices for future applications, for example, in desalination. A film of graphene oxide is applied to a 6 μm thick poly(ethylene terephthalate) substrate with a 20 μm diameter microhole and immersed in aqueous HCl solution. Strong diode effects are observed even at high ionic strength (0.5 M). Switching between open and closed states, microhole size effects, and time-dependent phenomena are explained on the basis of a simplified theoretical model focusing on the field-driven transport within the microhole region. In aqueous NaCl, competition between Na⁺ transport and field-driven heterolytic water splitting is observed but shown to be significant only at low ionic strength. Therefore, nanostructured graphene oxide is demonstrated to exhibit close to ideal behavior for future application in ionic diode desalination of seawater.

Entrance Effects Induced Rectified Ionic Transport in a Nanopore/Channel

The nanofluidic diode, as one of the emerging nanofluidic logic devices, has been used in many fields such as biosensors, energy harvesting, and so on. However, the entrance effects of the nanofluidic ionic conductance were less discussed, which can be a crucial factor for the ionic conduction. Here we calculate the ionic conductance as a function of the length-to-pore ratio (L/r), which has a clear boundary between nanopore (surface dominated) and nanochannel (geometry dominated) electrically in diluted salt solution. These entrance effects are even more obvious in the rectified ionic conduction with oppositely charged exterior surfaces of a nanopore. We build three models-Exterior Charged Surface model (ECS), Inner Charged Surface model (ICS), and All Charged Surface model (ACS)-to discuss the entrance effects on the ionic conduction. Our results demonstrate, for a thin nanopore, that the ECS model has a larger ionic rectification factor (Q) than that of ICS model, with a totally reversed tendency of Q compared to the ICS and ACS models as L/r increases. Our models predict an alternative option of building nanofluidic biosensors that only need to modify the exterior surface of a nanopore, avoiding the slow diffusion of molecules in the nanochannel.