Introducing Molecular Functionalities within High Surface Area Nanostructured ITO Electrodes through Diazonium Electrografting

Electrochemically Deposited Molecular Thin Films on Transparent Conductive Oxide substrate: Combined DC and AC Approaches for Characterization

Transparent conductive oxides such as indium tin oxide (ITO) substrates are commonly employed as prime materials for optoelectronic applications. Enhancement in functions of such devices often compels stable and robust modification of the ITO substrate to improve its interfacial charge transfer characteristics. Thereby, in this work, naphthyl modifier multilayer films are fabricated on ITO substrate using conventional electrochemical reduction of 1-naphthyl diazonium salts (NAPH-D) via altering its concentration ranging from 2 mM to 12 mM with a step size of 2. Surface coverage was significantly tuned by varying NAPH-D concentration, keeping other parameters such as the number of scans and scan rate constant. For lower concentration (2 mM), the molecular thickness ~ 6 nm was obtained, whereas, with higher concentration (12 mM) produced around 15-18 nm thickness. Atomic force microscopy (AFM), cyclic voltammetry and electrochemical impedance spectroscopy (EIS) in the presence of a ferrocene redox probe also supports the formation of well packed molecular film grown on the ITO surface. Further, the wettability property of the grafted naphthyl film was investigated at different surface coverages and correlated with charge transfer resistance (Rct) obtained from EIS studies.

Porphyrin-based MOFs as heterogeneous photocatalysts for the eradication of organic pollutants and toxins

Water and air pollution are among the major environmental challenges of this era. Waste management, economic sustainable development and renewable energy are unavoidable concomitant considerations. Over the past five years, nanosized metal-organic frameworks (nano-MOFs) have been developed for the elimination of pollutants in wet media and air-born toxins using the highly efficient reactive oxygen species (ROS) of type I (H2O2, •OH, O[Formula: see text] and of type II (1O[Formula: see text]. The ROS are catalytically and efficiently generated through photosensitization, and porphyrins and metalloporphyrins are pigments of choice for this purpose. This short review summarizes the fundamentals of ROS generation by porphyrin-based nano-MOFs (mainly through the formation of ROS type II) and their composites (leading to ROS type I), which includes energy and electron transfer processes, and their applications in these environmental issues.

Building Tailored Interfaces through Covalent Coupling Reactions at Layers Grafted from Aryldiazonium Salts

Aryldiazonium ions are widely used reagents for surface modification. Attractive aspects of their use include wide substrate compatibility (ranging from plastics to carbons to metals and metal oxides), formation of stable covalent bonding to the substrate, simplicity of modification methods that are compatible with organic and aqueous solvents, and the commercial availability of many aniline precursors with a straightforward conversion to the active reagent. Importantly, the strong bonding of the modifying layer to the surface makes the method ideally suited to further on-surface (postfunctionalization) chemistry. After an initial grafting from a suitable aryldiazonium ion to give an anchor layer, a target species can be coupled to the layer, hugely expanding the range of species that can be immobilized. This strategy has been widely employed to prepare materials for numerous applications including chemical sensors, biosensors, catalysis, optoelectronics, composite materials, and energy conversion and storage. In this Review our goal is first to summarize how a target species with a particular functional group may be covalently coupled to an appropriate anchor layer. We then review applications of the resulting materials.

Nanofabrication Techniques in Large-Area Molecular Electronic Devices

The societal impact of the electronics industry is enormous—not to mention how this industry impinges on the global economy. The foreseen limits of the current technology—technical, economic, and sustainability issues—open the door to the search for successor technologies. In this context, molecular electronics has emerged as a promising candidate that, at least in the short-term, will not likely replace our silicon-based electronics, but improve its performance through a nascent hybrid technology. Such technology will take advantage of both the small dimensions of the molecules and new functionalities resulting from the quantum effects that govern the properties at the molecular scale. An optimization of interface engineering and integration of molecules to form densely integrated individually addressable arrays of molecules are two crucial aspects in the molecular electronics field. These challenges should be met to establish the bridge between organic functional materials and hard electronics required for the incorporation of such hybrid technology in the market. In this review, the most advanced methods for fabricating large-area molecular electronic devices are presented, highlighting their advantages and limitations. Special emphasis is focused on bottom-up methodologies for the fabrication of well-ordered and tightly-packed monolayers onto the bottom electrode, followed by a description of the top-contact deposition methods so far used.

Solid-phase synthesis and photoactivity of Ru-polypyridyl visible light chromophores bonded through carbon to semiconductor surfaces

1,10-Phenanthroline (phen) was grafted to either indium tin oxide (ITO), fluorine-doped tin oxide (FTO), or titanium dioxide (TiO₂) semiconductors (SC's) by electrochemical reduction of 5-diazo-phen. The phen ligand is bonded to the semiconductor at C5, and it can be handled in air. The semiconductor-phen (SC-phen) complexes displace both CH₃CN ligands from either cis-[Ru(Mebipy)₂(CH₃CN)₂]²⁺ (Mebipy = 4,4'-methyl-2,2'-bipyridine), cis-[Ru(^tBubipy)₂(CH₃CN)₂]²⁺ (^tBubipy = 4,4'-tert-butyl-2,2'-bipyridine), or cis-[Ru(pheno)(bipy)(CH₃CN)₂]²⁺ (bipy = 2,2'-bipyridine; pheno = 1,10-phenanthroline-5,6-dione) dissolved in DCM/THF (4 h, 70 °C) to form the corresponding surface-bound SC-[(phen)Ru(bipyridyl)₂]²⁺ chromophores. The identities of the SC-[(phen)Ru(Mebipy)₂]²⁺, SC-[(phen)Ru(^tBubipy)₂]²⁺, and SC-[(phen)Ru(pheno)(bipy)]²⁺ (SC = ITO, FTO or TiO₂) chromophores were confirmed by X-ray photoelectron spectroscopy (XPS); inductively coupled plasma mass spectrometry (ICP-MS); UV-vis and reflectance infrared spectroscopies; and cyclic voltammetry (CV). The data were compared to analogous Ru-polypyridyl control compounds dissolved in solution. A facile ketone-amine condensation solid-phase synthesis reaction between SC-[(phen)Ru(pheno)(bipy)]²⁺ and [Ru(1,10-phenthroline-5,6-diamine)(bipy)₂]²⁺ in ethanol (80 °C, 1 h) formed the dinuclear, bound chromophore SC-[(phen)(bipy)Ru(tpphz)Ru(bipy)₂]⁴⁺ (tpphz = tetrapyrido[3,2-a:2',3'-c:3'',2''-h:2''',3'''-j]phenazine). Photoelectrochemical oxidation of hydroquinone and triethylamine under acidic, neutral, or basic conditions showed that the SC-chromophore photoanodes are active, and that TiO₂-[(phen)Ru(Mebipy)₂]²⁺ is the most active and stable under basic- and neutral conditions. The dinuclear chromophore SC-[(phen)(bipy)Ru(tpphz)Ru(bipy)₂]⁴⁺ was most active and stable under potentiostatic conditions in acid.

Use of calixarenes bearing diazonium groups for the development of robust monolayers with unique tailored properties

Calixarene-based diazonium salts can be easily synthesized in a few steps. This review surveys recent examples that illustrate the key advantages of these highly reactive molecular platforms for surface modification.