Electrochemical Degradation of Reactive Blue 19 Dye by Combining Boron‐Doped Diamond and Reticulated Vitreous Carbon Electrodes

Establishment of electrochemical treatment method to dye wastewater and its application to real samples

It is of great significance to study the treatment of organic dye pollution. In this work, a method of electrochemical treatment for reactive blue 19 dye (RB19) wastewater system was established, and it was applied to the actual dye wastewater treatment. The effects of applied voltage, electrolyte concentration, electrode spacing, and initial concentration on the removal effect of RB19 have been studied in detail. The results show that the removal rate of RB19 can reach 82.6% and the chemical oxygen demand (CODcr) removal rate is 54.3% under optimal conditions. The removal of RB19 in the system is mainly the oxidation of hydroxyl free radicals. The possible degradation pathway is inferred by ion chromatography: hydroxyl free radicals attack the chromophoric group of RB19 to make it fall off, and then decompose it into ring-opening. The product is finally oxidized to CO2 and water. The kinetic fitting is in accordance with the zero-order reaction kinetics. At the same time, using the established electrochemical system to treat the actual dye wastewater has also achieved good results. After 3 hours of treatment, the CODcr removal rate of the raw water is 44.8%, and the CODcr removal of the effluent can reach 89.5%. The degradation process conforms to the zero-order reaction kinetics. The result is consistent with the electrochemical treatment of RB19.

Electrochemical and sonochemical advanced oxidation processes applied to tartrazine removal. Influence of operational conditions and aqueous matrix

Tartrazine degradation was investigated by electrochemical and sonochemical oxidation processes. Anodic oxidation was carried out using boron-doped diamond (BDD) electrodes. The influence of current density and dye initial concentration on the removal of tartrazine from water was analyzed. The experimental results indicate that total removal of tartrazine was obtained, and Chemical Oxygen Demand (COD) and Total Organic Carbon (TOC) removals of up to 94.4% and 72.8% were achieved, respectively. To optimize the process, the pollutant removal percentage, the kinetic rate constant, and the TOC removal efficiency were chosen as target variables. Moreover, sonochemical oxidation experiments at a high-frequency range of cavitation (up to 1 MHz) were performed to establish the influence of three different operating variables, namely ultrasound frequency (0.5-1.1 MHz), ultrasound power (2.0-26.6 W ⋅L^-1), and pulse-stop ratio (5:1-1:1). The process was also analyzed in terms of kinetics and energy costs. The kinetics resulted to be three times faster for the electrochemical process. However, the calculated energy costs were very similar, at least at long treatment times. Finally, the influence of three aqueous matrices was investigated. According to the experimental results, the natural occurrence of chloride and/or nitrate ions in water strongly conditions the rate of the process, although at least 90% of tartrazine removal was achieved within the first 50 min of treatment.

Electrochemical oxidative degradation of X-6G dye by boron-doped diamond anodes: Effect of operating parameters

Boron-doped diamond (BDD) is an excellent electrode material. As the anode in an electrochemical degradation tank, BDD has been receiving widespread attention for the treatment of azo dye wastewater. In this study, electrochemical oxidation (EO) was applied to electrolyze reactive brilliant yellow X-6G (X-6G) using BDD as the anode and Pt as the cathode. To balance the degradative effects and power consumption in the electrolysis process, the effects of a series of operating parameters, including current density, supporting electrolyte, initial pH, reaction temperature and initial dye concentration, were systematically studied. The oxidative process was analyzed by color removal rate, and the degree of mineralization was evaluated by TOC. The optimal experimental parameters were finally determined: 100 mA cm^-2, 0.05 M Na₂SO₄ electrolyte, pH 3.03, 60 °C, and an initial X-6G concentration of 100 mg L^-1. As a result, color completely disappeared after 0.75 h of electrolysis, and TOC was removed by 72.8% after 2 h of electrolysis. In conclusion, the EO of a BDD electrode as an anode can be a potent treatment method for X-6G synthetic wastewater.